Z10 will not turn on- after being put to sleep with full battery

I turned my Z10 off last night to save the battery. It was freshly charged.  I woke up this morning and tried to turn it on.  Nothing happens, not even a light comes on.  The thing is a brick.  It won't respond to being plugged in.  I got it brand new, I've had it for six months, and I only ever use the charger that came with it.  I'm afraid it's completely toast.  Unless this gets fixed I'll never buy another Blackberry anything, but it's doubtful they'll be in business long enough to make that call.
Any SOLUTIONS are welcome.  Being without a phone is not tenable and a BUSINESS such as Blackberry who alleges to SERVE BUSINESS with their products should know this.  I am seriously disappointed.

Turned on after holding all three buttons for half a minute.  But I'm not convinced this is the end of its troubles.  Definitely getting a Samsung after this- I've never had a problem with any of THEIR electronics, and they're not going anywhere.  The big worry for me is I'll need to send my Z10 in and they'll no longer exist to fix it.

Similar Messages

  • 1st generation ipod touch will not turn on after being charged

    1st generation ipod touch got a white screen and then after that when charged it will not turn on. Does anybody know what happened or how I can fix it.

    That symptom is one of those covered here:
    iPod touch: Hardware troubleshooting

  • IPod will not turn off after being used as an external HD in Windows

    I have disabled the option to have Itunes open when I connect my Ipod and I turned off the iTunesHelper in msconfig. This allows me to use my Ipod as an external HD without interference by iTunes. I have found that since upgrading to Ipod firmware 1.1.1, after I disconnect my Ipod using the Safely Remove hardware option in Windows XP SP2 my iPod will not turn off. I just turn on the lock, and let sleep mode set in after 2 minutes.
    This only occurs if I connect the iPod as an external HD and does not occur when I connect the iPod with iTunes open to sync my music library. The problem started with firmware 1.1.1. Is anyone also having this issue, and if so, is there a known solution?

    If you are not past the 2 weeks return period you can just return it.. for sure the TC is not ideal when you want something to store files.. the fundamental issue is lack of backup. The TC cannot back itself up. Nor can Time Machine in the computer backup network drives.
    To mount the TC disk in finder.
    Use Go, Connect to server. in the top menu.
    Type in AFP://TCname.local or TCIPaddress. (where TCname.local is the correct network name of the TC.. ie not its name as typed in, if it includes spaces and illegal characters like apostrophe. You need to find the actual network name from network utility netstat scan or better still use proper naming on the TC.
    Local is the default domain and helps.
    If the TC is in router mode the IP is static and is better used than the name.
    AFP://10.0.1.1 for example with default IP is far superior way to identify a network resource.
    The disk password will be requested. Add it to your keychain.
    It is better to load files to a DMG or sparsebundle.. See Pondini for info.
    Q3 http://pondini.org/TM/Time_Capsule.html

  • My Mac will not turn on after being on vacation:(

    we have been on vacation and now our Mac will not turn on? The power is good that if is plugged into. Will not power on at all:(

    I would go straight to 5. Reset the SMC. If all else fails, bring it in, the PRAM battery may need to be replaced.

  • 4th Generation iPad will not turn on after being restored

    I just restored my mother's new 4th generation ipad with all of her data from her gen 1 iPad.  Once it was done downloading all of her app's, the 4th Generation iPad shut down. 
    I tried to reset it by using the sleep button and home button and it never turned back on. 
    I've connected it to my Mac and cannot get any response from the iPad. 
    Any suggestions?

    Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
    dropped iPad
    https://discussions.apple.com/thread/4474708?tstart=30
     Cheers, Tom

  • My ipad will not turn on after being dropped

    My IPad fell off the sofa, and the screen no longer works. It has turned black but i can still hear the sounds on it. I really need help with this.

    Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
    dropped iPad
    https://discussions.apple.com/thread/4474708?tstart=30
     Cheers, Tom

  • MacBook Pro not waking up after being put to sleep

    Hey everyone, got a weird question. I bought an external monitor for my MacBook Pro (late 2010, Lion). For the past few days, whenever I put it to sleep using the sleep command in the Apple menu, I come home at night and find that it woke up at some point, started collecting my Growl notifications and IRC messages and just sat there running all day. It's also pretty warm when I pick it up (I'd say about as warm as half an hour of Minecraft gets it, not sure how else to describe it). The monitor is being left plugged in all day, as is a Logitech Unifiying reciever for my house. It's also connected to an Apple Bluetooth Keyboard the whole time.
    What the heck is going on? Anyone got a solution? Thanks!

    The principle is this: whenever your MBP is involved in an operation that keeps it awake, your MBP will keep this command going - until you disable the process. For me, it's the application Printopia; if I have sharing disabled - which Printopia doesn't want me to do - it keeps my machine awake, until I enable sharing.
    Your situation is going to take a little invesigation on your part, but I can guarantee you that it's not a system or hardware issue. Systematically, disable or enable functions - typically on Control Panel - until the process is resolved. There's no "wizard" to root out the problem.

  • My iphone 5 will not turn on after i switched it off.

    my iphone 5 will not turn on after i switched it off. i have tried resetting and putting it into recovery mode but it will not respond to anything. i have also left it on charge for 24 hours and tried again but no response, help!

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Phone will not turn on after erasing settings

    Iphone will not turn on after erasing the settings

    1. Charge with the AC adapotor for at least 30 minutes.
    2. Reset the phone: press both the home and power buttons for up t0 1 minutes, releasing when the Apple logo appears

  • My iPad4 will not turn on after i OS 6 update

    My iPad4 will not turn on after i OS 6 update and it keep asking to connect to iTunes?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My iPhone will not turn on after a yet another blue screen of death. Please help!

    As mentioned above, my phone will not turn on after a yet another blue screen of death. All of a sudden it turned off, and it wouldn't turn on for quite some time, even after I plugged it in the charger. It wasn't long after the screen turned on, but it only displayed a bright black. I decided to turn it on and off a few times. Nothing worked.
    I have also tried to call the phone from another one. It was as if the phone was simply off.

    Hello ZarinaUrum,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPhone.
    iOS: Not responding or does not turn on
    http://support.apple.com/en-us/TS3281
    Cheers,
    Allen

  • Light will not turn off after installing new cyano cartridge

    Light will not turn off after new cyano cartridge installed

    I suspect that the ones that say they will work with Windows 8 on the box.  If it does not say that, check the maunfacturer's website.  They eventually will have to give Windows 8 support for the new cards or loose out to the competitors cards.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Iphone 3gs will not turn on after attempting a factory restore

    My iphone 3gs will not turn on after attempting a factory restore, all that happens is the apple logo appears the timer goes round then stops.  It then switches itself on and off several times to no avail.
    The only way I can turn it off now is by holding the off button and the home button, but then it goes into the cycle again.
    Any advice gretly appreciated.

    http://support.apple.com/kb/HT1808

  • My iphone will not turn on after I replaced the battery

    My iphone will not turn on after I replaced the battery, itunes logo comes up, but it will not connect and does not reset! does anyone know what I can do?

    Who replaced the battery, you, Apple or an Authorized Apple Service Provider? If you did it yourself, then you could have done anything to disable it. It also voids any warranty and post-warranty support from Apple and the forum. You are on your own. If Apple or an Authorized Apple Service Provider replaced it, then take it back and have them check it.
    The iPhone does not have a user replaceable battery, or user serviceable parts. It is meant to only be serviced by Apple, or authorized service providers.

  • Iphone 4 will not turn on after restore

    Have performed a full restore of my iPhone 4 using iTunes, including software, firmware and my last backup. Now will not turn on by any combination of sleep/awake, on/off buttons and connected/disconnected to power.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

Maybe you are looking for

  • How do I move files from Event Library to Project Library?

    How do I move Files from Event Library to Project Library? I tried drop and drag, that didn't work. I am new to Apple. I have always had a windows box b4 this. If anyone can help, please do. Thanks Alain

  • Error when displaying portlets..

    hello all, I have some pages with some tabs including some portlets (forms, reports and dynamic pages). it was running well before.. but now it gives error instead of displaying the portlet. the error massage replaces the portlet. and that happened w

  • VBA and RFC - How to deal with tables in export/import parameters

    Hi, maybe one of you can support me... I have a couple of vba modules reading and writing data to SAP by means of function modules. As usual, they use export and import parameters as well as tables (in the table section). They work very well. Now, I

  • PSI form - showing partial info-R12

    Dear Dina, When Project Management implemented(R12) and when the budgets are based on web based , such budget information's can be carried over to PSI Forms by running PRC:update Project summary amounts......how the consolidated data repository can b

  • Correct version of Safari

    Ok, I need an opinion. Like most of the people on this forum, I recently upgraded to Safari 5. I did so through Software Update. Since I fixed a small problem which was caused by a bad cookie it has been working great. Now I come to realize that Soft