Z10 won't load up past 99%

Hi everyone, I'm having a problem with my Z10 where it won't load up past 99%. I've tried all the obvious stuff I can think of, battery/sim/memory card out and back in, tried a reset on Blackberry link and it doesn't respond, ran the battery flat and started again, soft and hard resets as told by my network... all nothing. It's stuck at the start up screen (with the BB logo in a square that loads around it) It gets to about 80% then slows right down, after an hour or so it gets to 99% but thats it. I left it on 99% all night thinking eventually it might work, but no. So, any ideas?
Cheers, Matt

There ae 3 stickies that could address your issue
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/bd-p/blackberryos
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

OS won't load up past white loading screen

Hi everyone,
So since last night my MacBook won't load up past the white loading screen with the apple and the spinning load thing... I last used it 4 days ago, and it was running fairly slowly, especially the login screen (ie after sleeping it would take a good minute or so to bring up the login box...), as I was away for the weekend (happy new year to everyone by the way!) I decided to turn it off and not take it with me. Unfortunately when I got back last night i was hit by the problem described above. I tried a safe boot but that made no difference, after the safe boot bar was complete the white screen (with the apple and the loading thing) continued...
My MacBook is a 13" black beauty from June 2007, and currently runs snow leopard. I don't have a partition with with windows or anything like that.
Any suggestions would be greatly appreciated!

Try booting from your install disc while holding down the C key so you can run Disk Utility.
Using Disk Utility to verify or repair disks
While you have the Disk Utility window open, check Capacity & Available at the bottom of the window. Make sure there's a minimum of 15% free disk space.
And S.M.A.R.T. status should say Verified.

IPod Won't Load Songs Past 52

Ok, I have a iPod Shuffle and I have tried everything. I have reloaded and restored and even formated the iPod, nothing worked. I can not load any songs past 52. I have tried using different programs to load songs, but no success. Can anyone help??!!??!!

"Did you enable disc use and or adjust the "choose how much space will be reserved for songs versus data." in the settings?"
"Just going to mention that. =] Yes, to get to that, have your iPod plugged in and in the bottom right corner of iTunes you will see a little iPod, click it. Then in the window that pops up you will see a silde bar and make sure it is all the way on the songs side."
I can't find that on mine. The only thing in my corner is the eject icon. How do I disable for disk use?

WARNING: Premiere CS6 won't load past "Loading ExporterQuickTimeHost" after QT 7.7.3 update

Just what the subject line says, Premiere CS6 won't load up past the splash screen and "Loading ExporterQuickTimeHost" after I updated to QT 7.7.3 (Win7). No other updates done, my CS6 is up to date. I reverted back to 7.6 and problem went away. Just an little word of warning to those who see the update pop up.
If you run into the problem, here's the link to download 7.6. You will have to uninstall 7.7.3 then instal 7.6.
http://support.apple.com/downloads/#quicktime

I ran into a similar issue on Premiere Elements 11: On program launch, the system hung on "Quicktimehost.pm". After some troubleshooting with no success, I:
1) Uninstalled Quicktime version 7.7.5
2) Installed Quickitme version 7.6
3) rebooted my machine
4) SUCCESS-> launched Premiere Elements 11 without issue
Hope this helps a few others!

IMac makes a loud beep on start up, won't load past the blue screen and the black ticking dial appears every few seconds in centre of screen.

Urgent help!
Out of the blue my mac lost the mouse cursor even though it had connection so I rebooted only for the mac to make a loud beep on start up then get stuck at the blue loading screen. It won't load past the blue screen. I've tried to reboot holding down the shift key but no change. I've also shut down, unplugged the main for 15 seconds, re plug and wait 5 seconds before starting up again but no change. Does anyone have any suggestions?
PS: I'm not too sure which systems I am running without being able to check in about this mac. I bought my imac in January or February 2011 if that helps.

The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
http://support.apple.com/kb/HT1547

NAND script and won't load past apple screen

My I phone 5 has crashed won't load past apple screen and has a list of NAND scripts can anyone help or had this happen

Standard troubleshooting...
1. Remove apps from the Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
2. Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
3. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
4. Restore with your backup.
5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it. You may need to try DFU mode (Google for it).
6. If still a problem, it's likely a hardware issue.

Help! Won't load past white screen!!

I need help please! My curve won't load past the white loading blackberry screen. I downloaded an app from the app store and it crashed my phone. I called my carriers tech support but they are backed up and it might be a days before they can get back to me.

Jenn, If your BlackBerry stays powered off with a white or black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Iphone 4 won't load past logo screen

While on vacation, my phone went black. I thought the phone had gotten too hot, so when I got back to our room, I plugged it into the charger and after a few minutes it said "activation required", then brought me to the "connect to itunes" screen. Of course, on vacation, I didn't bring my computer! So after a week gone without my phone, I am connecting it to itunes and it won't load past the silver apple logo screen and itunes won't recognize it!! Help!! Is my phone trash or can it be saved???

My solution: I opened the phone, removed the battery, cleaned out the battery connector and reattached the battery. The phone turned back on and showed the low battery sign. I had done this before and it didn't work. Apparently the problem was I hadn't properly connected them. You need to make sure it's locked on tight so when you close your phone slides on easily.

Satellite M40 won't load past BIOS screen

when i turn my Satellite M40 on sadly it won't load past about 7/8ths of the blue bar going across the screen.
this has left me completely baffled as what to do.
apparently it could be repaired by removing the battery cables on my CMOS?
would anyone know how i would go about doing this? or have any other ideas?
thanks xx

Hi Dec,
The scrolling blue bars indicate that the Wondiows operating system is being loaded from the hard drive. If this process stalls during the load then it is likely that either the hard drive itself is defetive or the files which are being loaded are corrupt and cannot be loaded.
Interfering with the CMOS chip will not correct this problem since the BIOS has already been loaded at this stage.
If you have access to a bootable CD/DVD (such as Norton Disk Doctor) then I siggest you try booting from it and running a scan of your hard drive. Alternatively you could try re-installing your operating system from the Toshiba recovery CDs but this will over-write any of your own data on your hard drive.
regards

My laptop won't load past the main blue screen

Hi, I went to restore my laptop to a previous point, it did the usual things, it switched it's self off to then restart again but won't load past the main blue windows 7 home premium page, it it keeps flickering as well, I've tried switching on and off and taking the battery out, nothing works, never had this happen before :-S

Hello again, sorry that the steps that I we have attempted have not resolved the issue. I have a tool that you can try. It's called the HP Support Assistant. If you have any computer issues, the Support Assistant will find them and give you solutions to the issues or resolve them for you. Please click on the link that I have provided. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&dlc=en&lc=en...
Thanks again.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Ipad won't load past apple screen

My Ipad won't load or shut down. When the cover is opened the screen w/apple is there..desktop sometimes comes on, but as soon as screen is touched it returns to apple screen. I backed up the ipad with itunes on computer and attempted to restore it but it won't
restore until "find my ipad" is turned off, which I can't do since the ipad won't load the settings.
Updated to ios7 two days ago and was working okay. I'm not sure if this has something to do with the update.

Have you tried rebooting?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Firefox won't load google image search results

Firefox won't load google search results. It will load the page of results with the thumbnails etc. but if you click any of them, just a loading spinning icon appears on the tab and it never loads.
I have tried:
Both logged in and out of google account,
All other areas of google work with no problems (news, shopping etc.),
Site working perfectly in Internet Explorer,
Running firefox in safemode,
Manually disabling all plugins and addons,
Clearing the cache and cookies,
Opening results in new tab just results in white page with web address but it never loads,
Restarting both my PC and router.
It's not been working for at least the past 6 hours. Last time I used it was about a week ago and it was working fine then. I've not noticed any problems on any other sites this week that I can recall.

Updating firefox to version 17.0 appears to have solved this.

Windows 7 won't load properly / possible HDD failure?

Well I will start off by saying I've been having problems with this since I've bought it. It used to be under warranty and I had to ship it back twice, and I've had to do countless system recoveries but this time I'm at a loss. My current problem started about 4 days ago. I had skype downloaded, and my skype started freezing randomly, but only for 30 seconds to a minute, and then come right back to working. Then this started happening more frequently, and then it got to the point to where it wasn't just skype that would freeze, it was my computer. It must have only been explorer.exe that was freezing or something because my mouse still moved, and if I was in a skype call the skype call would work but I couldnt type or click on skype without it saying that it wasn't responding. Then yesterday that problem upgraded again to nothing working very well. My computer (again I can only assume it was explorer or something) would start up normally, and then once I got to my desktop the load light would come on my tower and freeze / slow down anything and everything. Example was I had VLC media player open watching a show and the video would freeze for 2 to 5 minutes, play for 10 seconds, then freeze again. Beforehand it was only slight lock ups, but then it became full blown lockups. Once that load light came on it stayed on and never wavered and I would be forced to restart my computer to even give it a chance to run properly for a few minutes before this same problem would occur. Yesterday however the problem upgraded once again, and my computer wouldn't even let me get to my desktop normally. I was able to load into safemode with networking to try some solutions but nothing worked. Then the hangup issue started occuring in safe mode as well, forcing me to restart again. This is where it just keeps getting worse sadly. My computer would get to the "Starting Windows" screen, sit there for a couple minutes, then maybe 1 out of 10 attempts it would get to the "Welcome" screen as if it was trying to load my desktop but never would load it, and on the other 9 attempts I didn't make it to the "Welcome" screen it just sat a black screen with the load light going and it would never do anything. My mouse has never been frozen at any point so it's not a full on freeze situation, but something isn't right. I did a sytem recovery last night, put it back once again to factory settings and it still locked up a little but nothing compared to how it had been. I turned my pc off and went to sleep, and then this morning it did the usual not getting past the "starting windows" screen. Sometimes it wouldn't even recognize my hard drive, giving me the old "insert media and boot from disc" or "No media found", I also got two errors, PXE-E61: Media test failure, check cable, and the other message was PXE-MOF: Exiting PXE ROM. Then after receiving those messages my computer would restart and give me the choice to hit a button to load from disk. Throught the course of this problem I tried startup repairs, smart tests, anti viruses, nothing did anything to help. So I decided once again it was going to be time for a system recovery, but now when I hit f11 to go into the system recovery options, all of it is blacked out. I can't even click on system recovery anymore. So at this point Windows 7 won't load at all, not even in safe mode, and I'm lucky to even be given the OPTION to start it in safe mode. Half of the time it seems my computer doesnt even recognize my harddrive, and I can't even do a system recovery or repair tools, but the repair tools didn't really do anything anyway. So I have no way to use that computer, and Im thinking it might be HDD failure but I'm not hearing any noises coming from it and my computer has always been a little slow so it's not like things have slowed down by a lot so I'm not so sure its my HDD but I have no idea what to do or where to start since I've exhausted all my of resources on trying to fix this issue myself. I know this problem is probably way too vague to try to get an accurate idea of what is wrong, but I will check back now and then and answer any questions to the best of my ability (I'm not tech savy so if you need really fancy PC information you wil most likely need to tell me how to acquire said information). I mean I guess if I have to I will get a new HDD, but that means I will most likely need to get a new OS, and I love windows 7 with all my heart and I don't want to upgrade at windows 8. I feel like it's my OS but it could very well be anything at this point.

Hi @rhhox ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

When I publish a pdf collection with index to a CD, the index won't load

I am using acrobat XI pro. I have a pdf collection with 30 chapters, a table of contents that is linked to each chapter, and an index. I have inserted a bookmark for the table of contents in each chatper. There are lots of cross chapter links. It all works beautifully on my computer, I can click links between chapters, go back to table of contents using bookmark on each document, and conduct a search that uses the right index and breaks results down per chapter. But when I burn the folder to a CD and install on another computer, the index won't load and the table of contents link is broken. the index is there on the CD, every file and the file structure looks identical to what is on my computer hard drive. I have tried different methods of burning the disc. They all say they are successfully burned. But when I insert into another computer (have tried a laptop and desktop), I either get an error message about the index or it just create it at all. I deleted the index and all of its associated files and recreated from scratch, associating each of the 30 chapter to the index again, but still does not work. Help, past deadline already!

I fail to see the issue. You have added crop marks, have you not? For all intents and purposes those are marks that are supposed to be visible and printable for cutting in the real world. If you don't want them, don't use them. Acrobat can generate them on the fly for printing, anyway.
Mylenium

Upgraded to Yosemite, Now Safari Won't Load Youtube and Other Sites

I upgraded to Yosemite the day of. Almost immediately I found that Safari no longer would load Youtube. At all. It would just sit and spin and work and eventually say that the page wasn't available. This was also a problem with other websites. For instance, IGN would load, but it was very, very slow. Redirected webpages from Youtube that used URL shorteners would do the same thing as Youtube, it would just sit and crank away and finally give up.
When I try the same thing with Google Chrome, it loads those pages just fine. Youtube and these sites also work on my Macbook and my iPad, so I believe the problem is specific to my iMac.
So... I got really angry a few days ago and did a complete reformat of my computer. I didn't restore my old image from Time Machine, but I did a brand new install and just backed up some precious files. I re-installed Yosemite on my freshly cleaned hard drive and low and behold, Youtube worked, as did all the others!
But after about four days, the same problem is happening again. Youtube won't load, redirects from Facebook using URL shortening is a disaster again. I'm losing my mind. What could be causing this problem!?? Reformatting was the only idea I had, and I thought it was a very thorough solution. Is Safari doing this for anybody else?
My system:
iMac (27-inch, Mid 2011)
Processor 2.7 GHz Intel Core i5
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6770M 512 MB
Running Yosemite Version 10.10

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Z10 won't load up past 99%

Similar Messages

Maybe you are looking for