Z1C camera issues - manufacturing date? recall?
Hi,
I went through the whole thread about the camera issues.
Sadly I got a bad phone as well (black version).
The flash leakage isn't the only problem, the camera looses focus during video shooting as well, and the most bothering thing is the photo quality on regular photos (manual mod, different ISO, whatever..) which is poor even compared to the Galaxy S2 !!
I was very dissapointed, and it seems the local retailer isn't familiar with the issue..
I'm willing to wait but I am afraid suffering users will be forgotten and Sony will focus on the Z2/compact/whatever they will release next...
I read in the xda forums a review that shows much better results from the camera
http://forum.xda-developers.com/showthread.php?t=2663132
Is it possible that just the first models have this problem?
Maybe we can figure out from the manufacturing date something?
Mine was manufactured on Oct. 2013, black version.
What do you think?
Thanks !!
Hi to all Sony fans the camera is actually very good but the thing that screwed it up is the stuperior auto that is **bleep** the owsome hardware under the hood,regarding flash bleeding iam not seeing any bleed,so after testing i found the follwoing results for owsome pics:
1-iso 50 for shooting 0 to 1 meter far away from the object.
2-iso 100 for shooting 1 to 2 meter far away from the object.
3-iso 200 for shooting 2 meter and above.
or use camera zoom x its not great as manual mode but it is way better than stuperior auto if u want to shoot good photos at great speed in the dark well its android so there is alternative to any **bleep** app
for shooting a single face but the focus on face detection,for multiple or large objects but the focus on multiple autofucos
Down ul find the pics the blured and ugly from stuperior auto the good one are from applying these modes:
Similar Messages
-
Outbound Delivery without Manufacturing date
Hi Guys,
I have activated SLED in Article master.(We are using SAP IS Retail, ECC 6.00)
At the time of GRN, users have entered manufacturing date to check
remaining shelf life for an article.
I have made following customization (using transaction code OMJE)
(a) 3 No Check at Goods Issue for movement type 601,602, 647 and 648
In spite of above IMG settings (No Check at at Goods Issue), system
shows an error message that, Enter the date of production (Message No.
12018) in transaction code VL02N.
Pls note that, we don't want system to check SLED at the time of PGI.
Any feedback....most welcome.
Regards,
MuralidharaHi MURALIDHARA,
Please Check your incompletness procedure.
I guess u r sending the goods to the store. During stock transfer movement type 641, 603 are used. You will also have to set this indicator.
Let me know if u r still stuck. I have the solution as i have already configured this process.
Regards
Tapan -
Manufacturing date entry control in MIGO for process order GR
hi
when i make process order GRN output entry ,i enter the manufacturing date for the batch.But it is now allowing me to enter,future date as well as any past date even before the RM issue date.please let me know wheter any control can be given so that while enterin manufacturing date , system should not allow a dae earlier than , RMissue date or Operation start date and any date future than the material recipt GR date for the output.The best practice is the manufacturing date is the date on which the first operation of the batch starts.
unnikrishnanplease write the user exit for the same
-
Header batch manufacturing date to be update after 261 movt of any compane
Dear all ,
we have one requirment in that ....suppose we have one Process order , we done companent batch determiantion
now what happens whenever we do confirmation ..means 101 then Manufacturing date at Header bacth updates , ( the 101 date is set as Manufacturing date. ...Now when we do picking i.e goods issue of any companenet under order , that date shud
be there as manufacturing date for that header batch .
pls suggest.
Regards,
PrernaHi Prena,
Could you please post your solution how you acheived this? I have the similar requirement to populate batch manufacturibng date as process order confirmation date.
Your help is appritiated.
Thanks,
Jyoti -
Population o batch manufacturing date automatically through process mesages
Hi gurus,
We sre using control recipe to download data into MES system and uploading data through process message to do the confirmation and goods receipt. We are using batch management and calculating shelf life expiration date at the time of confirmation using manufaturing date + shelf life. Now the issue is, through process message we are not able to populate batch manufacturing date automatically and getting confirmation error after sending the process message to SAP. In process messgae category we are using characterics PPPI_END_DATE,PPPI_EVENT_DATE, PPPI_START_DATE as a date field.
Can anybody suggest how can we populate batch manufacturing date automatically through process mesages.
With thanks
Rajib Pathakthanks
-
Camera Raw updates Date Taken in JPG Files
Hi,
I have CS6/CR 7.2. I have had this issue where my file dates became changed (8000 odd files) so I had to restore 23000 files from backup .
When investigating trying to find out what happened. when I open a JPG from Windows Explorer, photoshop is set to use Camera Raw for jpg files on open (ok). If I cancel the dialog, nothing happens (ok). If I click Done or Open Image, the file itself has the "Date Taken" time updated - 7 hours ahead of the original correct time.
This pretty much matches the date issue I have on the 8000 files. Is this expected behaviour? Why would Camera Raw update Date Taken and did it choose 8 hours because I am in the PST timezone (GMT-8 or currently GMT-7 with daylight savings)?
I have reproduced this on 4 or file random files - taking copies and comparing afterwards.
Thanks!
Mark.Camera Raw writes your JPEG files back out with updated metadata no matter what settings you choose, because Adobe feels they understand the format of metadata in the files well enough to be confident they will not corrupt the files.
I've asked them for years to avoid doing that, to no avail. I don't want my original files re-written. It sounds as though you are of a like mind.
It is for this reason that I *never* open a JPEG file through Camera Raw.
It's possible there is a time zone problem or something, but that's not the point. What, specifically, is corrupted is less important than Adobe believing it's okay to write back to your JPEG files. That you have actually seen something corrupted is testament to it not being unfounded paranoia.
Generally I'm supportive of Adobe's design decisions, but absolutely not on this issue. All I ask is that Adobe honor the "keep settings in the central database" preference choice for ALL input files, not just those for which they would otherwise write an XMP file. I don't think it's too much to ask.
By the way, you might want to visit the Camera Raw-specific forum and make note of your issue there:
http://forums.adobe.com/community/cameraraw
-Noel -
MANUFACTURING DATE IN QUALITY CERTIFICATE
Hello, we are just with sap implemented but i don't know many things yet. The issue is that the quality certificates shows the final date of production as manufacturing date but, what i need is that the certificate shows the initial date of production as the manufaturing date. After, from the manufacturing date i want sap calculate the best before date and to show it in the certificate.
Could some one help me?
thanks.
JrdzTypically this is controlled by your production people. When the receipt the material they have the ability to enter/change the production date. The production date is visible in the batch record, (msc3n), and can be changed updated via msc2n.
In the cert you shouldn't have to worry about figuring out the production date, it should print what has been maintained. If what is maintained is incorrect then the process should be reviewed to make sure it is correct.
FF -
SLED /Manufacture date update.
Hi Gurus
We have some issue in SLED . Production done and batch is upadate with manufacture date and expiry date. later this was stock tranfered to other plant ( Australia) having received a batch in Australia & updated the manufacture date & expiry date correctly, a quantity of the same sku/batch was, one month later received in India and when they performed the receipt (MIGO transaction) entered different Manufacture date / expiry date, which has apparently updated the dates on the batch details in the Australian plant.
Actually, while doing the MIGO this is update manually, so the the batch is tagged to the wrong expiry date.
Is it possble to control this from manual override, to control the wrong entry.
SanthaNo. The receivers need to be trained that if they receive batch from another plant, and it is an SAP batch, they should not update it. They are provided warnings at the time of receipt that the batch already exists which should clue them in. In addition, the manufacture date from Australia should have been correct and the expiration date would be correct anyway. So I would be more concerned about, and inquiring as to how, where and why they got the manufacture date they used instead. Having a mfg. date, and hence the expiration date of a batch is a very serious issue and violation of most company procedures, not to mention of regulatory and customs agencies.
I'm sure there is probably a user exit that can used to check the data before saving. You should check with a purchasing person to check the available user exits for MIGO if you want to go that route.
FF -
my camera is not working anymore. what can i do? do i need to update the driver?
btw my OS is Win 7 Home Premium.Whoops I guess that path didn't come out correctly I cut and paste the local
one instead.
But the point still stands, is there any way to check if Labview is perhaps
not passing a pointer as expected?
-joey
"Joey Oravec" wrote in message
news:3e25b77c@newsgroups....
> Here's the camera issue in short.
>
> If you check \\server\nistsoftware\LV Camera Interfaces\Olympus Software
> there is a testing VI. You must have the Olympus 3.2 SDK installed, the
> registry key added (see manual p14), and the camera in PC control mode
(also
> see manual p14).
>
> Everything works fine for reading the number of remaining pictures,
erasing
> pictures, capturing a picture, etc. You want to do a "Download Test" in
that
> VI. It passes a 1-D array to get
Picture(). Check the variant output, which
> is the exact same data that was input. My current theory is that LV copies
> the array instead of passing a pointer, since there was a lot of related
> discussion on news://newsgroups.ni.com/comp.lang.labview
>
> I am stalled on talking to the SDK guy at Olympus (Chris Kemmer, corporate
> offices) since he's away from his desk.
>
> -joey
>
> -
Z1- Getting stuck and some camera issue
Some times my phone get stuck in home screen as well as i am playing games. and also camera is not working sometimes after i capture a photo, on that case picture is not save. and the camera icons wont show. i have to lock the phone and unlock again to use it.
furthermore phone is bit slow though now i am not using much hard application in the phone...
Some of my friends using sony and with the time all their phones got slow. even sony z. It might be issue comes from android but any one will not like to use a slow phone for higher price.
apart from this z1 is best in camera elegant look and so happy to use... please check on the above issue..
thanksHi Bighatz1
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
For the camera issue, could you please go into Settings > Apps > scroll across to All > scroll down to Camera > tap Camera > tap Clear data - then test the camera again to see if this has helped.
In regards to the slowness of the operating system, this could be because there is a lot of data on the device, you could try deleting any apps, photos, videos etc. that you don't need anymore to see if it runs any faster than before.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
when i trys to open the camera on my n2700, it says 'CAMERA ON STANDBY'.
Whoops I guess that path didn't come out correctly I cut and paste the local
one instead.
But the point still stands, is there any way to check if Labview is perhaps
not passing a pointer as expected?
-joey
"Joey Oravec" wrote in message
news:3e25b77c@newsgroups....
> Here's the camera issue in short.
>
> If you check \\server\nistsoftware\LV Camera Interfaces\Olympus Software
> there is a testing VI. You must have the Olympus 3.2 SDK installed, the
> registry key added (see manual p14), and the camera in PC control mode
(also
> see manual p14).
>
> Everything works fine for reading the number of remaining pictures,
erasing
> pictures, capturing a picture, etc. You want to do a "Download Test" in
that
> VI. It passes a 1-D array to get
Picture(). Check the variant output, which
> is the exact same data that was input. My current theory is that LV copies
> the array instead of passing a pointer, since there was a lot of related
> discussion on news://newsgroups.ni.com/comp.lang.labview
>
> I am stalled on talking to the SDK guy at Olympus (Chris Kemmer, corporate
> offices) since he's away from his desk.
>
> -joey
>
> -
HT201300 Why does manufacture date MacBook Pro matter?
I am going to buy a 15" MacBook Pro with Retina display. I can buy a new one now (April 2013), or a refurbished model with a manufacture date of mid-2012. The stated specs for the 2 machines are identical. What would be different about the two? Should it matter which one I get?
It's not as simple as that.
I've seen number of sources claiming that the components used in 2013 model are slightly different, presumably to resolve some of the issue 2012 model had.
Also, the 2013 are equipped with faster CPU by 0.1 Ghz.
Frankly, 2013-model will also have higher resale value than 2012 counterpart.
But again, yes, if the price difference is significant, I wouldn't hesitate with refurbs. Bought few of those and there was no way to tell that it's refurb. -
Droid 3 Camera issues I am running into:
- - First - If I can start the camera without it causing the phone to crash.... (how do you disable the "Droid" sound on reboot - getting VERY annoying)
- - I have to use a task killer to keep the camera from burning up the battery after using it. - WHY????
- - I bought my phone to keep in touch via skype with my son @ college - but now learn that the droid 3, with it's front facing camera DOES NOT WORK - (not on the Verizon-specific Skype - what a lame app), but using the real Skype app... on a video chat, the Droid gives a black screen, not my image. ??? From what I see online, same response from other video chat tools. This was one of the biggest selling points for me!!! Am more than mildly annoyed at this one.
Previous phone was a Droid 2 - with none of these problems.... appears that the Droid3 was released before testing and fixing issues.
PLEASE ADDRESS THIS!!!statman wrote:
Droid 3 Camera issues I am running into:
- - First - If I can start the camera without it causing the phone to crash.... (how do you disable the "Droid" sound on reboot - getting VERY annoying)
Try Settings / Applications / Manage Applications / All Tab / Camera / Clear Data to resolve camera issue.... To disable startup sound try disabling Settings / Sounds / SD Mount or something along this.
- - I have to use a task killer to keep the camera from burning up the battery after using it. - WHY????
I understand where you coming from but I would use System Panel instead of a task killer, a number of users helped me see the light of not using a task killer.
- - I bought my phone to keep in touch via skype with my son @ college - but now learn that the droid 3, with it's front facing camera DOES NOT WORK - (not on the Verizon-specific Skype - what a lame app), but using the real Skype app... on a video chat, the Droid gives a black screen, not my image. ??? From what I see online, same response from other video chat tools. This was one of the biggest selling points for me!!! Am more than mildly annoyed at this one.
That strange because the Droid 3 is supported on Skype's site.
Previous phone was a Droid 2 - with none of these problems.... appears that the Droid3 was released before testing and fixing issues.
PLEASE ADDRESS THIS!!! -
Issue in Data transfers using ALE for E-Recruiting standalone system
Dear Experts,
We have an issue in data transfers using ALE. We are having standalone system where E-Recruiting is maintaind seperately and the version is EHP5.
When we configured iDoc in Sandbox and its working fine. But when it comes to Dev and Quality servers this is not working fine.
we have created iDocs using the following filters.
For Object P: Infotypes 0000, 0001, 0002, 0003, 0006, 0024, 0105.
For Objects O,S: 1032, Subtype: 0010
For Object: 1001, Subtype: A003, A008, A012, B007
For Object O: 1001, Subtype: A002, B002, B003, B012, Tyoe of related object: O,S
For Objects: C, O, S, Subtype: 1000, 1002, 1028
For Object:C, Subtype: 1001, Subtype: A007
When we do the data transfers in Sandbox using PFAL it is transferring the data properly.
But when we do the same iin Dev and Quality servers we are not able to do it and gettign 52, 51 errors.
Here we are facing a strange issue. For some Users when we transfer data it is transferring data but with 52 error messgae.
For some users I am getting 51 error where i could not transfer any data.
For some users, when we tranfer O, S, and P related data is moving but getting mostly 52 error and all the relationships are not moving here for O,S and properly. But P related CP, BP and NA are getting created successfully.
It is happening only in Dev and Quality server and that too some users are able to get transferred but not all.
Where will be the issue? How can we resolve this?
Any help will be appreciable.
Thank you in advance.Hi Sekhar,
Have a look over these threads.
Errors in ALE data transfer to E-Recruiting.
http://scn.sap.com/thread/1535402
BR,
RAM. -
Issue in Data from DSO to DSO Target with different Key
Hello All,
I am having Issue in Data from DSO to DSO Target with different Key
Source DSO has Employee + Wage + Post numner as key and Target has Employee + Wage Type as key.
DSO semantic grouping works like Group By clause in sql, is my understanding right ?
Also if someone can explain this with a small example, it would be great.
Many Thanks
KrishnaDear, as explained earlier your issue has nothing to do with semantic grouping .
Semantic grouping is only usefull when you have written a routine in the transformation for calculations and in error handling .
Please go through this blog which explains very clearly the use of semantic grouping .
http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2013/06/16/semantic-groups-in-dtp
Now coming to your above question
DSO 1
Employee WageTyp Amount
100 aa 200
200 aa 200
100 bb 400
100 cc 300
If we have semantic group as Employee . If we have Employee as key of the target DSO and update type as summation .
then target DSO will have
Emp Amount
100 700
200 200
In this case Wage type will be the last record arriving from the data package . If the record 100 cc 300 is arrivng last then wage type will be cc .
2) Case 2
DSO 1
Employee WageTyp Amount
100 aa 200
200 aa 200
100 bb 400
100 aa 300
if we do Semantic grouping with Emp and Wage Type If we have Employee and wage type as key of the target DSO and update type as summation .
then target DSO will have
Emp Wage Amount
100 aa 500
200 aa 200
100 bb 400
Hope this helps .
Maybe you are looking for
-
How Do I Get A Sprint Novatel S720 to work with a PB G4 10.4.8?
I need help with "Sprint Mobile Broadband Card Novatel Wireless Merlin S720. I have a Mac PowerBook G4 running 10.4.8 as follows: Machine Name: PowerBook G4 Machine Model: PowerBook3,3 CPU Type: PowerPC G4 (2.1) Number Of CPUs: 1 CPU Speed: 667 MHz L
-
unable to contact my iphone or ipad to itunes Microsoft Windows 8 x64 Home Premium Edition (Build 9200) Acer Aspire V5-552 iTunes 11.1.4.62 QuickTime 7.7.4 FairPlay 2.5.16 Apple Application Support 3.0 iPod Updater Library 11.1f5 CD Driver 2.2.3.0 CD
-
Aperature crashes/force quit every time I open it
Aperature crashes/force quit every time I open it since the first time I installed it - Can anyone assist with troubleshooting this?
-
Finding elements in a general tree
I am writing a method to find elements in a general tree structure. The structure has a root and each parent node has 0-10 children, whose nodes are stored in an array linked to the parent node. The node class for the tree has a variable info that st
-
Put dependent files prompt? [subject edited by moderator]
When I try to upload to the internet this is the message I get all the time can anybody help me with this? Put dependent files? Selecting "Don't show me this message again" will hide this dialog until re-enabled from the Site category of the Preferen