Z2 Camera doesn't get focus, photo is burred

Hello. I didn't have any problem with my z2 for 3 months, but from 3 days ago the camera now is not getting focus, the photo/image look like blurred, I've tried the manual focus but also didn't work. Someone had the same problem? How did you solve?
Thank you

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
That sounds strange, have checked so there are no dirt or similar at the camera lens? You can also try to clear data for the camera via Settings > Apps > The tab "All" > Camera > Clear data.
Otherwise, I suggest that you perform a software repair on your phone via PC Companion:
http://support.sonymobile.com/global-en/tools/pc-companion/
In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Video Camera Doesn't Auto-Focus Nokia X2

    My phones camera doesn't focus while in video camera mode... whereas when i bought this phone new, that time it was doing a proper job... Sometimes even when my camera is in photo mode it doesn't focus properly.... In video mode it doesn't do totally... i think it is the camera's lenses fault as the lenses must focus automatically it is a hardware defect i dought.....

    Hi, SankarNamah. Does this issue happen regardless if the led flash is turned on or not? Are there any changes if you change the camera settings of the phone? May we know where are you located? Have you already read the post made by @armagon? If not yet, here it is:
    v. 2.1.0.13 was published and it's for Middle East region only (will not be available elsewhere), and contains a few minor settings changes -> main content included in your phone is still exactly the same as in v. 2.1.0.11/2.1.0.12 releases. 
    We'll wait for your reply.

  • After updating my iPhone 5 to iOS 7.1.1, my back camera doesn't auto focus anymore, and it takes blurry pictures. What do you think I should do?

    after updating to ios 7.1.1, my camera doesn't focus anymore. pictures are blurry. what do i do? can anyone help me with this?

    Hello Megeedolore,
    It sounds like your rear facing camera is not functioning correctly. I would start by quitting all the open apps on the phone with the following article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, and you have a protective case, remove the phone from the case and retest the issue.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • TextField doesn't get focused directly using Firefox

    I have a login dialog which contains userNameInput textField. Upon the application load, I want the userNameInput be fucused and cursor blinking. And I can type without clicking on the screen.
    In loginDialog.as, creationComplete I have
         callLater(setDefaultFocus, new Array(null));
    And setDefaultFocus function:
         focusManager.setFocus(userNameInput);
         focusManager.showFocus();
    This works perfectly in IE. But it's not working in Firefox.
    Can anyone tell me why this is not working in Firefox? Is this a Flex issue or Firefox issue? And is there any work around exist?
    I've searched online and tried the following ways, no one works so far.
          1. stage.focus = userNameInput;    
          2. navigateToURL(new URLRequest("javascript:document.getElementById('UxFlashApplication').focus();"),"_self");
          3. userNameInput.setSelection(userNameInput.length, userNameInput.length);      
    I've also tried set wmode to opaque, this works but it breaks something else in the application ( e.g. mouse scroll), I prefer not to do anything with wmode.
    Envoironment: Flex 3/4, windows 7, Firefox13 and 16
    Any help would be appreciated!

    Having the same problem. Trying to work out if the 3GS has an actual moving part in the camera to focus or whether it 'sharpens' it digitally... I'll keep you posted if I find out

  • Can't get focused a JTextField within a JTable cell

    I have a table and I placed a cell editor with a JText field on it for all cell editing,
    I want to do things when the focus is lost or gained and my app works fine when a cell is double clicked or f2 is pressed, but when a cell is selected (without double clicking) and just begin typing it produces no focus gained event.
    I tried by calling grabFocus method of that jTextField within the overriden prepareEditor method of the JTable but it doesn't get focus (doesn't even gains and loses it :s )
    Does anyone have an idea of how to force this component to grab focus?
    Thanks

    Hai,
    dont add the FocusListener to the EditorComponent.
    Try to use the JTable Functions - like this:
    import javax.swing.event.ChangeEvent;
    import javax.swing.table.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.util.EventObject;
    import javax.swing.*;
    public class Test extends JFrame
         JTable table;
         JTextArea text;
         JScrollPane scroll;
         JTextField cellTextField;
         Test()
              DefaultTableModel model = new DefaultTableModel();
              cellTextField = new JTextField();
              text = new JTextArea();
              text.setEditable(false);
              scroll = new JScrollPane();
              scroll.setViewportView(text);
              table = new JTable(model){
                   @Override
                   public Component prepareEditor(TableCellEditor editor, int row, int column) {
                        text.append("Better use this to Start Edit!\n");
                        return super.prepareEditor(editor, row, column);
                   @Override
                   public void editingStopped(ChangeEvent e) {
                        text.append("Better use this to Stop Edit!\n");
                        super.editingStopped(e);
              model.addColumn("Column 1");
              model.addColumn("Column 2");          
              model.addRow(new String [] {"Cell 1", "Cell 2"});
              table.setCellSelectionEnabled( true );
              table.getColumnModel().getColumn(0).setCellEditor( new DefaultCellEditor(cellTextField));
              table.getColumnModel().getColumn(1).setCellEditor( new DefaultCellEditor(cellTextField));
              getContentPane().setLayout(new BorderLayout());
              getContentPane().add(table, BorderLayout.NORTH);
              getContentPane().add(scroll, BorderLayout.CENTER);
              setSize(300, 300);
              setVisible(true);
              setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
         public static void main(String[] args)
              new Test();
    }

  • [OpenBox] Window not getting focus if skip_taskbar is set to 'yes'

    I have bound gmrun to ALT-F2. When I have skip_taskbar set to yes in rc.xml, gmrun does not get focus. This is quite annoying as I have manually click on it to get the focus.
    <application name="gmrun">
    <position>
    <x>center</x>
    <y>center</y>
    </position>
    <focus>yes</focus>
    <layer>above</layer>
    <skip_taskbar>yes</skip_taskbar>
    </application>
    If, however, I remove skip_taskbar as shown below, gmrun get its focus when launched.
    <application name="gmrun">
    <position>
    <x>center</x>
    <y>center</y>
    </position>
    <focus>yes</focus>
    <layer>above</layer>
    </application>
    * Same issue with mplayer/terminal - Doesn't get focus when skip_taskbar is set to 'yes'.
    Last edited by keerthi (2008-10-03 19:45:36)

    I have the same problem, but, and this part is really bad, I also mostly don't have this issue.
    So I can't help except to say I run OB 3.4.7.2 and [sometimes!] have the same issue as you.
    -dav7
    Last edited by dav7 (2008-10-04 03:49:06)

  • My camera doesn't appear in "Get Photos from" box

    My camera quit showing up in the "Get Photos from:" box. Any ideas how to fix this? I have to  boot up PhotoShop Album Starter. Then the Downloader icon appears in the task bar. I click on Launch from there, or select Get Photos from the Tool bar, but my camera doesn't show up in the options anymore. Any ideas?
    Thanks,
    Philip

    Did you try clicking the duplicate file button present in the downloader. If No, then click it you'll find your pics. Duplicate file button is present on top bar of downloader. It's the fourth button in front of 'Show' text. Downloader (APD) does not show the files that have already been imported in Photoshop Album Starter Edition.
    You can find your pics if you launch Adobe Photoshop Album Starter Edition from your program menus.
    Please let me know if it is helpful.
    -Agrawal

  • My iMac doesn't recognise some photos on my Kingston camera card won't download on to my iMac

    My iMac doesn't recognise some photos on my Kingston camera card but recigognises others. How can I get it to download the rest of my photos?

    I'm using iPhoto. I have downloaded some off the same card but every now and then it refuses to recognise all of them. Can't figure out why as I perform the same action each time.

  • Certain events in iPhoto will not sync to my iPad. No Error messages comes up and the photos themselves are ok. its like my ipad doesn't see them. Cause i can get some photos on there just not all.

    certain events in iPhoto will not sync to my iPad. No Error messages comes up and the photos themselves are ok. its like my ipad doesn't see them. Cause i can get some photos on there just not all. Photos are from the same camera and should all be in the same format.

    What is the file name of the video(s) you want to sync?
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • Dear apple management,  I have purchased I pad mini e few days ago. I need help as follows:  (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ?

    Dear apple management, apple support communities
    I have purchased I pad mini e few days ago. I need help as follows:
    (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
    (2) How do i sync my pc  with I pad mini?
    (3)i can read on i pad mini  file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
    Dr Uma S Nayak
    <Personal Information Edited by Host>

    You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
    For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
    You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
    Syncing music : http://support.apple.com/kb/HT1351
    Syncing apps : http://support.apple.com/kb/PH12315
    If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
    For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • How can I get all photos from the camera roll onto the photo stream so they will share between iphone and ipad?

    How can I get all photos from the camera roll, and all new pictures taken, to get on the photostream so they can share between iphone and ipad?

    When turning PhotoStream on with photos available in the Camera Roll, only photos captured by the iPhone or saved on the iPhone are placed in the PhotoStream.
    For all photos that were in the Camera Roll prior to turning PhotoStream on, import the photos with your computer and add the photos to your PhotoStream on your computer.

  • I have deleted some photos from camera roll which are taken by today but my icloud is bacuped on yesterday night.how can i get those photos.please anyone tell me because they are very important

    I have deleted some photos from camera roll which are taken by today but my icloud is bacuped on yesterday night.how can i get those photos.please anyone tell me because they are very important

    Are those photos on PhotoStream?

  • After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

    After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

    You should install Camera Raw 4.6.
    Visit this page and follow the instructions carefully:
    PC:    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Mac:  http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
    -Noel

  • I connected a digital camera memory chip with approximately 100 photos on it. The photos showed up in iPhoto. I believe I deleted the photos from the memory chip before importing them. Is there any way I can get the photos back?

    I connected a digital camera memory chip with approximately 100 photos on it to import into iPhoto. The photos showed up in iPhoto. I believe I deleted the photos from the memory chip before importing them to iPhoto. Is there any way I can get the photos back?

    Terence, thanks that site is a gem...have to explore it more fully at home as it drove security here crazy
    Looks like just the ticket for saving mistakes.

Maybe you are looking for