Z2 very slow charging after upgrading to lollipop ?

Please help me
After i upgraded my mobile from kitkat to lollipop android i charged my mobile .. from 5% to 70 % it took over 6 hours !!!!
Before updating the maximum time was 3hours from 1to 100%
P.S : the same cable and chager is present .. Nothing new used !!!
please explain what happened after this update ??

Not sure what we can do to help but maybe it's just that you have upgraded and it may take time to settle down - You could try performing a system repair
Performing a system repair using PC Companion will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • Very slow encoding after upgrade from 5.03 to 5.5 with MXO2 mini

    Hi all.
    After upgrading from CS5.03 to 5.5 my encoding now takes 5 times as long. A 2 minute HD Video file would take 2 minutes, and still does on the PC I haven't upgraded (identical almost) but now with CS5.5 it takes almost 11 minutes.
    Some explanation....
    I create HD MJPEG files on a PC with Blackmagic Decklink.
    I transfer these files to an HPz800 which used to run CS5.03 with Matrox Utils 5.1.1.37 and an MXO2 Mini with Max. (Nvidia Quadro fx4800 and 12GB of RAM)
    On a Blackmagic timeline HD 1080i MJPEG with filters of Auto Color, Fast Color Corrector and Gamma correction a 2 minute timeline would encode in 2 minutes give or take a couple of seconds.
    Now with CS5.5 and Mtx 5.5 an identical file takes 11 minutes to encode to Microsoft avi - Matrox 1920 x 1080i - 25fps.
    If I remove the filters (which I need to be able to use) it will come down to 2 minutes as it used to be.....so it seems to be the filters are now slowing things down when they never used to. I have never rendered before exporting. Ever. So this time I tried rendering first and it brought the 11 minutes down to 7 minutes but when taking into account the 4 minutes rendering time I am no better off.
    I have updated CS5.5 to CS 5.5.1 and MTX Utils to 5.5 and then 5.5.1 and it makes no difference. Still 11 minutes to decode 2 minutes with three filters, which is exactly what I have always been doing but now it doesn't work....
    Can anybody help? or make a suggestion as to why using filters in 5.5 now multiplies the encode time by 5 when it never used to. Everything else bar Matrox Utils on this machine is as it was before the upgrade to 5.5 and as I say my older machine is still 5.03 it can do it all in 2 minutes even with the filters intact.
    So have I really spent a small fortune upgrading to make my output 5 times slower. Not happy......

    To go further, every single encode that I have done is slower than it was before with CS5.01 or 5.03.
    This is odd because going from Blackmagic to any other codec doesn't necessarily need the Matrox box or Matrox utils
    Blackmagic HD or SD to
    Matrox HD
    QT HD MP4
    QT SD DV25
    DV AVI SD
    Mpeg2 - DVD
    Every single encode is slow by 2x to 6x.
    Why should Blackmagic HD to QT MOV MP4 take twice as long as it used to...... having said that The speeds I am seeing now are what it was like before I attached the box in the first place, whether a Matrox codec was involved or not.... It is acting like a blocked funnel. when it used to be a lovely wide and clear funnel.
    Anyway Matrox have reproduced the problem and are investigating, so hopefully there will be an answer soon....

  • Very slow printing after upgrading to Mavericks and reinstalli​ng HP s/w for an Officejet 8600?

    Before upgrading to Mavericks, my HP 8600s (have 2) would zing at printing.  Now they are incredibly slow.  I had to do a Restore after my operating system upgrade and after that, the HP folder was not in the Applications Folder.  That caused me to reiinstall the HP s/w for the 8600  which I downloaded from the HP website taking care to download and install exactly as was prescribed for the Mavericks scenario.  I'm wondering if the problem is that I chose the bonjour versions of each printer when I reinstalled to each printer.  
    An idea of what I mean by slow is a one and half page letter is taking over 5 minutes to print whereas it used to print at about 30 seconds.
    I need some help on this ASAP because my home-office is at a standstill.  Many thanks.
    Tulsa Lawyer

    Hi BerniePiel,
    Choosing the Bonjour version means you have chosen the wireless option. Bonjour is a technology that is built into Mac OS and iOS. This technology discovers devices such as printers that are installed on the same network as a Mac or Apple mobile device. Bonjour is the default method for discovering devices on a network.
    I can certainly help you with this. When you added the printer, did you add the printer with the 'AirPrint' driver or are you using the HP driver? Us the screenshot below to help you check.
    If you do not see AirPrint next to your printer name as shown above, delete the printer and re-add it. When you click the plus symbol you need to choose 'add another printer or scanner', then select your printer and choose the HP driver next to 'Use'.
    If the issue persists, or you were already using the HP driver, try the following steps.
    Reset Printing System
    Click the Apple icon (   ), and then click  System Preferences.
    In the Hardware section, click  Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OKto confirm the reset.
    Type the correct  Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions 
    On the Dock, click Applications, and then click  Utilities.
    Double-clickDisk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions  button at the bottom of the window.
    Once the repair is complete, restart the computer.
    Restart the computer
    Once these steps have been complete, re-add the printer again, and print. Please let me know if this resolves the issue. If the issue persists I will gladly follow up and continue to work with you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • VERY Slow performance after upgrading to v4.5

    Since I upgraded to to v 4.5.138  my VZ BB 8830 has slowed to a crawl. Even trying to make or receive a phone call I get a spinning hour glass for several  seconds. It gets worse over time to the point where I have to take the battery out and restart.
    Then it is OK for a few minutes but gets progressively slower. Very annoying.
    Also, I can no longer sync, either with PocketMac or with the new BB DTM, despite uninstalling everything and reinstalling.

    Holding the power button turns the phone off.....
    alt, shift, del resets the phone.
    When turning the phone off, the phone is in a low power state I believe....I don't think it actually turns completely off. As you can set it to come on at certain times.
    A reset is the proper way to go.
    It actually mimicks removing the battery.

  • Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
    First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
    The next issue is iMessage as that's playing up and wifi drop out
    Good luck

  • IPhone 6 take longer time to charge after upgrading to ios 8.2

    Did someone have the same problem with me? After updating to ios 8.2, time taken to fully charge the battery seem longer than usual. Usually, it take roughly about an hour to charge from 10% to 100% but now it take nearly 3 hour. I have try to pull out the charging cable when the battery reach 96% and then plug in back after a few second. The battery percentage shows 100% after i plug in the charger. Is there something wrong with the system or the battery?

    I have this problem too. My iphone isn't recognizing ANY charger after  upgrading to 8.2

  • Lync mobile app will not launch after upgrade to lollipop on HTC One (M8)

    Lync mobile app will not launch after upgrade to lollipop on HTC One (M8). Is this a known issue or is a fix available?

    Hi THGutz,
    Did you install the latest version of Lync for Android ?
    The current version of Lync for Android is
    5.5.3.8935.
    I don’t test it on M8, but on other Android 5.0 devices it works fine.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Macbook pro slow internet after upgrade osx mountain lion

    Slow safari after upgrade to osx moutain lion.

    Have you reset Safari? Yet?  Top left corner of the screen next to the apple logo click on the word Safari, then click reset safari, make sure everything is checked then click reset.  Also try:
    Repair your permissions.  Go to applications then to the "other" folder then go to disk utility, on the left hand side you will see a white box.  Select the second option, usually called "mac HD" with that selected click on "repair permissions" in the center towards the bottom of the screen.  Wait for it to complete, then see if this fixes the issue.

  • VERY SLOW charging

    hello, my z10 is very slow charge since last week. I try to reset to factory (in BBLink), Security Wipe, and battery pull, but it's not work . It take 10 mins per 1%, HELP ME PLEASE
    PS. current OS 10.2.1.2102

    curve8530curve8330 wrote:
     This is known to jump start some BB batteries.
    There is nothing from the user here which indicates the battery needs any "jumpstart".
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

    Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space.

    I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.

    Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
    Next
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • Helloo my name is jafthel i have problems with my ipod touch 4g. if you can help me how i can fix it or solution i will be very happy. the problem is: when i push some aplication my ipod is very slow i after 3 minutes it goback to the home screen.

    helloo my name is jafthel i have problems with my ipod touch 4g. if you can help me how i can fix it or solution i will be very happy. the problem is: when i push some aplication my ipod is very slow i after 3 minutes it goback to the home screen.

    Next try the remaining items of:
    Apps crashing
    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Slow responses after upgrade to lion

    slow reponses after upgrading to Lion

    Slower with Lion-----Same story as Texas Cats above.
    Lion is killing me and my attention span was erratic to begin with...now I can't get anything accomplished.
    Replaced my 80 GB hard drive with a new 160 GB HD and it did nothing!
    I was told by Apple Genius Bar that more memory might be the answer but my mid-2007 MacBook is not supposed to be capable of handling more than the 2GB I have installed.
    Idid the clean-up, cache cleaning, photo removal, etc. Just trying to access simple searches on Google or Safari via Verizon Fios can be excrutiating. So far I have spent $400. on upgrades, etc. and wondering if Lion should be uninstalled?

  • My new iphone 6+ very very slow charging. 6% increasing in 1 hour charging.

    My new iphone 6+ very very slow charging. 6% increasing in 1 hour charging.

    How are you charging it? Are you using the included cable and charger? Are you plugging it into the wall? Or are you charging it from the USB port on a computer? What troubleshooting steps have you taken?
    The phone will charge best using the included cable and charger plugged into a wall outlet. If that's what you're doing and you're still having problems, you should try a couple of things. Have you tried resetting your device by pressing and holding the Home button and power button until the apple appears? Try a different cable. Try a different charger. Try a different outlet.
    If everything fails, make an appointment at the Genius Bar at your local Apple Store.

  • My BB Z30 very slow charging it take 8 hours full charging

    It is always recommended that BlackBerry users use BlackBerry branded accessories that come with the device. You should use the BlackBerry charger that came with the device. When charging a BlackBerry smartphone (Z30, Passport, Leap etc) with large batteries, it may take a while to fully charge the battery. Basically bigger batteries take longer to charge. I would say 8 hours to fully charge a BlackBerry Z30 is about right. For me personally I would leave my BlackBerry device charging longer.

    Dear Sir !my bbz30 very slow charging it full charge in 8 hours please help me. i have charger 2amp charger. please tell which amp best fast charging for my bbz30.  thank you

Maybe you are looking for