Z2 wont turn on red light

my xperia z2 abruptly turned off while there was 10% battery was remaning since then i tried every thing pressed all three buttons together power volume and tried that red button on the side of sim tray nothing is working out this is very worrying moment for me plz some help

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Iphone4 wont chrge and red light on

sudenlly my iphone4 is off and wont chrge from wall charge or pc and there is red light on all the time in the front
any help

Reset, hold together both the Home and Power buttons for about 15 seconds, until the iPhone turns on. If this works and everything is OK then great.
But if it does not work ...... the Red Light is a glowing sensor due to increased voltage in the iPhone. Take the iPhone to Apple for Warranty Service.

Curve wont start and red light flashes

I was on my way home on the train and running low on batteries, but thought i had enough to quickly browse the applications.
I'd installed the free Time app earlier that day and checked it out, and it wasnt really to my taste, so I decided to delete the app. It warned me the blackberry would need to restart which was fine, only it turned off and didnt come back on.
I thought it had just ran out of battery but now after four hours of charging, and plugging it to my PC the blackberry still wont start. My laptop wont even recognise its plugged into anything and every button I press just gets the flashing red light.
Can anyone help? Is there a manual reset button on the device?

Hello,
I had this happen one time to my 8530... and I thought my heart was going to break. I'm an engineer so I have a bad habit of breaking and fixing, as I have learned that it's the best way to become an expert on any given piece of technology...
Anyway, I was able to fix my Berry by attaching it to my Mac, and letting the computer load the OS on it. Make sure it's plugged in with the desktop manager when you boot the phone your desktop manager should prompt you if you want to reload the OS...
Basically that's what the flashing red light means... you corrupted your OS, and now needs a reinstall.
It takes about an hour to do...
Hope this helps!
~Tom
~Tom
Curve 8530

Xperia S does not turn on, red light when charging.

My phone, after spending a day on a boat, was low on battery (this was 2 hours after leaving on the drive home). It went from 6% battery to shutting down completely in a matter of seconds. I plugged it into my car charger immediately, but it has not turned on since. Previously i have had problems with the headphone jack not recognising if earphones were plugged in or not, but this usually resolved within a few minutes. On top of this i have once struggled to turn the phone on due to i believe a once off problem with the power button.
Recently the headphone jack has been playing up a lot more than usual, but it never resulted in this. I have never experienced any other problem with the phone. PROBLEM: Once it turned off, I have been unable to restart my phone. When charging it shows a dull red light like when charging less than 15% battery. I have charged it now, on and off using multiple different charges for 6 hours, and have left it on its original charger as i write this. The power button plus volume up has no effect. There is no vibrations when i turn on the device. The screen which usually loads something when charging, has not displayed anything since turning off. It does not connect to either an apple or windows computer with a usb cable, volume down key depressed or not. It does not get hot to touch while charging, and i remember according to AVG that the battery quality that day was "good". After 6 hours of charging, the red light is still there(and usually a full charge after 1.3 hours, leaves a green light) Put simply, the only responce of any kind i get from the phone is a red light when charging. What have i done? recharged the phone for 6 hours, tried power button, restart button combo, usb connection with both an apple and windows computer, i also put it in rice in case there was any water but did not change anything. anything changed? after 2 hours of charging on the wall, the red light disapeared... tried the above, nothing happened, unplugged the phone then replugged it in... red light. I will try to get it repaired shortly along with a broken PS3, but i would rather a solution, as both my work and social life heavily depend on it. thankyou in advance

If you have given it a good charge and still have no luck, I would advise running a software repair. This can be done with the phone powered off:
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.

Turning on Red Lights on the HP-Envy 17 3D-3090nr Monitor

Hi,
I was hoping someone could explain how the stereoscopic 3D lights (i.e. the 2 red lights on either side of the webcam) that drive the active shutter glasses work?
I recently installed Elemenatry OS Linux (based on Ubuntu) and noticed the lights get turned off when it boots. Windows 7 on the other hand automatically turns them on during boot and they stay on even after a reboot. Everything else works perfectly well enough, the 3D is the last piece of the puzzel.
I have desktop with the exact same dual boot setup but as a 3D monitor I use the Sony PS3 3D Display which works in a similar way to the monitor on the Envy-17 3D. However, on the PS3 display there is a button that one can use to manually activate the lights.
I am wondering if there is a way to turn the lights on manually on the Envy-17 display rather than dynamically as it currently is?
Is there a driver that I can apply with ndiswrapper or something to manually turn the lights on?
It doesn't seem to be a graphic card driver related issue and experience with Windows on the desktop has shown me that the auto-dectection doesn't always work.
Thanks in advance

PoPlease help me, I tried everything.

My BB Curve will not turn on; red light blinking

My bb curve 8330 will not turn on, charge, or do anything other than flash the red light at me. I tried removing the battery and have tried charging it, but nothing seems to help. Any ideas?
Solved!
Go to Solution.

Nevermind, I resolved the issue by removing my memory card.

Pearl 8100-Rogers not turning on-Red light blinking

Hello
I have new Blackberry Perl 8100.I got this from Rogers.It was sitting in box for few month.I tried turning on but it is not turning on.I left the phone in charge for more then 2 hour and it is still not turning on.
I tried taking out battery but and replacing back in but stillit is not turning on.I can only see red light blinking.nothing else.pls help me .thank you.

Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Torch 9800 Not turning on/red light blinking

I have Torch 9800 that won't turn on.
I've seen a few other posts on here and it seems this is a common issue, I've tried a few of the fixes suggested but no luck so far.
My 9800 has the latest version of BB OS available (unless there was one released within the last 4 days)
The red light only comes on when charged and goes on and off. When plugged into my PC it disconnects from the PC and then reconnects. Sometimes the charging battery symbol comes on and the blackberry loading screen after but the blackberry loading screen shuts off.
I have tried a new battery and that is not the issue.
I read that you can do an OS reload but my BB is not showing as connected under my connections (the noise indicates a device has been plugged in)
I'm at the end of my rope and need to know what to do !

Try following the steps here to reload the software on the device:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
Unfortunately you won't be able to backup the data on your device, but if you had BlackBerry Protect installed, you should be able to get most of your data back.
If you have any problems getting it to connect to the Loader.exe file in Step 2, unplug your phone and remove the battery, then plug the phone back in, and as soon as your PIN shows up, select Next. Don't worry if you miss it, just unplug the phone, plug it back in and try again.
I hope this info helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Touch sceen wont work and red light

My touch screen on my HTC Rhyme stopped working and now there is a faint red light in the top left corner of the screen. How can I fix this?

Hi. My name is Stephanie, >Personal info removed< daughter. I have had my phone since July 1, 2012. I have been having consistent issues with it taking FOREVER to turn on or restart. Also, I have at the same issue the starter of this thread. To describe in more detail, I can hit the on/off button to show the home screen. But, the touch screen is not working. And, there is a faint red light about 5mm to the left of the Verizon logo at the top of the front screen. I chose this phone because I wanted a smart phone and this looked like a great option, but I have been having consistent issues and have not dropped the phone or changed anything on the phone. Hoping to get some help, otherwise, I am contemplating paying the cost for the new Samsung note, as much as I DO NOT have the money to do this. Please let me know ASAP as to my options, especially since I don't have any discount or good upgrade options until 04/2013. Thank you so much hope that I can get some resolution to this problem. Also, you can e-mail me directly at >Personal email address removed<
Message was edited by: Verizon Moderator

Turn off Red Light that dots the "i" in ThinkPad

Is there any way to turn off the Red Light that dots the logo "i" in the Thinkpad S440?

Hi adoman,
I suggest putting following sticker on it, you'll never notice it's there:- http://cgi.ebay.com/Original-IBM-Lenovo-Sticker-11-x-30mm-127_W0QQitemZ350223067619QQcmdZViewItemQQp...
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Toshiba 52HL167 popped and turned off - red light flashing

While on, the TV made a pop noise and lost power. I let it cool overnight, but when I try to turn it on now, it makes some clicking noises as if it is trying to turn on from the middle top of one of the boards labeled "PE0365". Do I need to replace the board and if so, where can I get one?
Thank you,
Mrworkman2

Try performing a system repair using PC Companion - This will factory reset your phone and erase all data
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

My appletv wont turn on (the light) and I only purchased it in the last six months. what's the go??

the light was coming on this morning and now it's not, is this just a 'resetting' issue or a common problem? I just can't believe it's not very old and this is happening.

So you have no signal on the TV?
Could be something simple like a fuse in the power lead. If you have another similar one try that.
Device failure after such a short usage is not common but not impossible and some will - if only 6 months old it will be under warranty (and the remote).
If you have a micro USB lead then you could hook it up to a computer running iTunes as described here to see if the software is corrupted and it will restore:
http://support.apple.com/kb/HT4367

Wd my book 500gb studio edition wont turn on, white light half lit

Hi,
I have a Western Digital My Book 500GB Firewire/eSATA/USB 2 Studio Edition external hard drive that i bought 2-3 years ago. I've backed up a lot of data then and after that not used it at all until recently. I can't seem to get it to mount under Lion, as soon as I plug in the power lead the white bar of light at the front of the drive lights up but only the top half of it, there are no noises and plugging in a USB lead does not show the drive on my iMac.
Can anyone advise please, there's tons of data and I have only used the drive literally a few times. I just checked and my limited warranty expired six months ago so I can't ask WD to help.
Any help is greatly appreciated.
Thanks.

To give the conclusion in case anyone googles to here. I had to pry open the original WD enclosure and get the hard drive out. It's a big, cheap, plastic box made to resemble Apple's shade of silver, thus giving false confidence in quality of build which is atrocious.
The hard drive itself is perfectly fine, all the data is intact and transfer is at full speed. I had to get an external SATA to USB adapter and connect it to my iMac via a USB port. From there Lion treats it as any other external hdd.

Toshiba 32LV67 tv dvd combo wont turn on/Disc light blinks repeatedly

I have the 32LV67 dvd combo and the disc light just keeps blinking when i plug it in. i read somewhere that you can re-install the firmware but i cant find it anywhere. Please help me!

There is no firmware downloads for that model.
Try leaving it unplugged from power overnight. If the problem persists, it may require servicing.
- Peter

PS4 Console wont turn on ( No light or anything else)

My PS4 i have had for under forty days has stopped working, i try to turn it on by pressing the power button but i doesnt work and i have also tried to turn it on using the controller but still nothing. Recently i took off the cords and opened the PS4 to see if that would help, still nothing. This has happened before numerous times but when it did all i did was put the power plug out and then back in AND boom it was working, but now this time i tried that but it didnt work. help please.

Check the fuse in the plug Opening the console when it's only 40 days old has invalidated any warranty so you can't even take it back to the store for an exchange

Z2 wont turn on red light

Similar Messages

Maybe you are looking for