Z200 won't work with the HP Compaq LA2205WG monitor

I have a z200 that I recently purchased from ebay. I have a LA2205WG monitor that I am trying to connect to it. The z200 has a DVI-I connector while the monitor has a DVI-D connector. I am under the impression that this setup should work because I thought the DVI-I would connect to any other DVI connector. However, the monitor does not recognize the computer. It will give a message "no input devices found. Going to sleep" or something similar to that. I am at work and so may not have the verbage exactly right.So, I tried a VGA adapter. Using the DVI connector from the computer, I connected to the VGA connector on the monitor. Still get no display. Monitor still gives same message.Am I missing something or does it sound more like a hardware issue as I am beginning to think( As In bad video card, etc).Any information that can be shared will be greatly appreciated.

I would be checking hardware. Dont suppose you have a spare monitor and pc lying around? Maybe Haul it to work and do some swapping around. Figure out if its the monitor or ports on pc.

Similar Messages

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please help

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

I would like to update to Firefox 5.0.1, but I can't due to, too many things won't work with the version & will be disabled.

I have wanted to update from 3.6.22, to 5.0.1, but can't do to the following reasons: I can't due to, too many things won't work with the version & will be disabled. They are: Microsoft. NET Framework Assistant 1.2.1, Iconix 3.90.1, HP Detect 1.0.5.1, Yahoo! Toolbar 2.3.5.201101200332202 (I don't care about Yahoo! Toolbar, because I don't use it!). As soon as these issues are fixed, I will be able to update, to the latest versions. These issues should be fixed & ready to work, before a new version is available. Thank you!

Try using this extension to force compatibility.
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Check and tell if its working.

I have a Canon D60 camera, my raw files won't work with the raw converter in my Photoshop CS5. Do I need CS6?

Photoshop CS5 won't work with the raw files from my new Canon D60 camera. Do I need CS6?

A Canon EOS D60? It had support since Camera Raw version 1.0.

Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

Mine crashed once with new update, but working fine.
I had to delete old printer, restart iMac, and then reinstall
new drivers to get it to work. Would not complete without
the restart after deleting non-working printer. No problems
since and all features working.

Still cant download youtubes even w/firefox and the addon that won't work with the current FF version

For all that FF is supposed to be for me it's junk. I've spent hours trying to solve the download problem with realplayer and youtube. Finally tried FF but one obstacle after another. The youtube downloader won't work with this latest version of FF. If I try to download other things I get the stupid pop up saying to download FF. Already have it dumb ass! Navigation on the forums is basically worthless.

yes it says it's not compatable with the latest ff

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

My iPod touch 3rd generation won't play on my iPod dock when the alarm I set goes off. It plays normally and charges, but it won't work with the alarm. Could it be the iPod dock or my iPod?

My iPod touch just recently started doing this: I plug it in to my Sony iPod dock/alarm clock/radio. It charges fine and plays music fine, but when I set the alarm for it to go off, it doesn't go off. I can see that the dock is indicating that the alarm is going off, but the iPod isn't playing music. Could it be my iPod or the dock?
Also, there were 2 times when I plugged in my iPod to charge (once with a wall charger and once with the dock) and it said that it was fully charged. But it wasn't fully charged. I bought one of those iPod wall chargers from Target. It's not an Apple charger, but it is for iPods. Could it be that?
I'm going to try to reset my iPod and see if that helps any.

I have contacted apple support and Bose support. When I have heard back will post for everyone. I do encourage everyone to contact both companies until we get an answer to hopefully solve this issue. The more people who contact them about the issue, maybe the better chance they will help fix the issue.

My own headphones won't work with the iPod?

I have a pair of Sony Psyc headphones [http://www.target.com/gp/detail.html/sr=1-3/qid=1136948303/ref=sr13/602-4413487-1679852?%5Fencoding=UTF8&asin=B0007N55P0], and they're 3.5 mm stereo headphones, but only the right headphone works, and the left headphone has no sound at all.
This means that the iPod has a mono signal or that the headphones are not recieving the stereo signal.
Any way to fix this?

I feel stoopid!!! Yes, it does require a much more significant "push" than I was expecting. Thank you much for your help as well as yours Stedman1!!!

My speaker system won't work with the 6th gen nano

Why won't my Logitech Speaker system for the iPod play or charge my 6th gen nano? It's worked for all of my other nano's. I hope there's no compatability issues.

I'm having almost the exact same problem with my JBL On Stage Micro Speaker (from around 1996) except it charges and syncs my Nano 6G OK. It just won't play the Nano thru the speakers. All my other iPods have played fine sitting in the JBL speaker including my Touch 4G from fall 2010.
The only thing I can think of is that the dock connector in the Nano 6G is wired differently? It would be interesting to hear if anyone has speakers that play using the Nano dock connector. Or if someone from Apple would let us know if the dock connector pin-outs have changed. Very sucky!

My Norton Identity Safe won't work with the new version (4) of Firefox AND the new version isn't asking me to Remember my password info either - SO I now have to type in my password info wherever I go which is NOT a good thing. What can I do???

I have Norton Internet Security.
When I downloaded the new FF4 they said that a part of Norton wasn't compatible - and it seems that that part must have been my Identity Safe which holds all my password info & fills in all of my passwords for me.
You say this new version of FF automatically prompts me to have it save this info for me, but I sure didn't see that prompt and now every time I visit my online banking (and credit card site, etc, etc,) I have had to type in all this info myself.
This certainly is not convenient!
It's bad enough I just get used to one system and you all go & reinvent the wheel -BANG!
Hasn't anyone ever heard of baby steps?

Hmmm, Norton extensions are broken again in Firefox 4.0.1. It seems that Norton didn't allow for Firefox 4.0 security updates when they updated their Firefox extension for Firefox 4.0. Norton says they'll have a fix in two weeks. A Norton user posted a fix in this forum thread.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

TS3518 When using a projector the sound won't work with the picture. I get one or the other. What can I do to get both?

How can I get airplay to show picture and have sound using a VGA to hdmi adapter with Apple TV. It won't play my video apps with sound? I get a choice of sound or video but not both?

vga don't carry any sort of audio

I have an iPod touch and an iPad4. iTunes lets me work with the iPod Touch but won't show me what's on the iPad. Any ideas?

I have an iPod Touch and an iPad4. iTunes recognises both items and lets me work with the iPod Touch but won't work with the iPad. In fact iTunes does not respond to clicking on anything in the iPad window even though it knows that it's connected. Any ideas?

Look her and it may give insite on what is missing. Otherwise:
Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Repair it yourself if you are up to it
iPod Touch Repair – iFixit

Will iphone cases work with the touch

when looking for a case, can you use an iphone case?
or do you have to buy specific touch cases?

1G Touch cases also won't work with the 2G Touch that was just released. The case is a slightly different shape and there's a volume control on the side that would be covered by a 1G case.
The way power is supplied to the Touch through the dock connector changed as well.
Cheers,
Andreas

Z200 won't work with the HP Compaq LA2205WG monitor

Similar Messages

Maybe you are looking for