Z22 Unable to change date in Preferences

My Z22 works fine except that I am unable to set the date in the Preference screen. When I do correct the date and press "Done" it goes back to 01/02/2005. I am able to HotSync OK and have tried a reset with no luck.
Post relates to: Palm Z22

Hi.. Welcome to the Palm forums. If I am understanding this correctly you can change the time but as soon as you leave the screen, save the changes, it referts back to /1/02/2005. Now you state you did a reset, I'm assuming you mean you pressed the reset button on the back. That is whats called a soft reset, like rebooting your computer. What I would recommend is to do a hard reset. Be sure you have synced your data as this will delete all data on your device. Then before you sync data back to your device test the data and see if it holds. If so sync data back and test again to insure its not some software that has been installed when you resynced causing the problem. If you need instructions on how to do a hard reset go to http://kb.palm.com/SRVS/nua/launchKB.asp?c=887

Similar Messages

Unable to change Date Created in Metadata

Please help with my first post...
Unable to change Date Created field in Metadata.
I am a newspaper photographer sending .jpg pics with captions to my office from my iMac. They are viewed at the office on Windows PCs using SCC MediaGrid.
When changing Date Created in Metadata Invalid Format warning appears "Format should be ISO 8601 XML compliant, that is YYYY-MM-DDThh:mm[:ss][tz] (eg 2006-07-11T13:14:30-07:00)"
If 2009-09-26, for example, is entered then exported pictures opened up in Photoshop or shown on SCC MediaGrid do not display the date.
To get dates to show up I first have to open a pic in Photoshop, go to File Info, enter 26/9/09 in Date Created and Save As.
Next I have to Import this into Aperture where the Date Created shows as "20090926".
Using Lift Metadata and Stamp Metadata the date can be transferred to other pics.
Now when I export these pics the date does show up in Photoshop and SCC MediaGrid.
Can Date Created be typed straight into field in Aperture?...Very important when pics go into archive on a server.
Also if I hit Return key in a Metadata Caption, to type on the next line, both lines will appear as one with a small square in-between them when viewed on SCC MediaGrid on a Windows PC.
Thanks in anticipation.

Nick I don't generallt use the IPTC metadata, so I'm not sure I will be too much help.
What version of Aperture are you using? I tried both things and I didn't have any problems with the latest version of Aperture on my Mac.
I was able to enter a date into "Date Created" both with and without the time-zone adjustment. Can you tell us the exact string you tried to enter into the "Date Created" and exactly when you get the error? I tried to enter my time zone (eastern US) as "-5:00", but Aperture wouldn't let me enter the 5 and popped up the error message when I typed that key. I had to use "-05:00".
As for the caption, when I hit return, Aperture ends my edit. I cannot reproduce your described behavior of actually getting a new-line into the field. I suspect your problem (although I don't know how you get to your problem) is one of the following:
1) The IPTC standard doesn't tell if the software should use a Unix-style end-of-line (which is a line-feed), or a DOS/Windows style end-of-line (which is carriage-return followed by line-feed). Aperture may put in the Unix-style and your Windows programs don't know what to do with it.
2) The IPTC standard does indicate the end-of-line style, but either Aperture or your other programs don't follow it.
or
3) IPTC Metadata doesn't actually support end-of-line, so Aperture should not allow you to enter multiple lines, but it has a bug so it does allow you to do that.
Can you tell us where exactly you are editing the caption? I tried it in the inspector pane (on the left) in the "Metadata" tab, and then I hit the "IPTC" button at the bottom of the tab.
nathan

Unable to change Data label position in the Chart using Position from Properties

Hi All,
I am trying add the Data label to the chart and the users want them to appear on the top of the stacked bars. By default when I enabled the data labels it showed up in the middle. When I tried to change the position by doing
View --> Properties --> Position --> Top/Bottom/any of other 8 options -- it does move a bit
I even tried deleting chart and recreating it.
What am I missing? Thanks in advance.

Hi Ranjith_SQL,
According to your description that you have add the Data label on your stacked column chart which by default display in the middle of the chart, you want them to appear on the top of the stacked column chart, right?
For a Stacked Column Chart, the data labels are always placed in the center of the Series bars. This is by design. I also test it on my new version of SSRS 2014 and find have the same result.
If you really need the data label to display on the top, I recommend you to change the chart type to column chart which by default have the Data labels display at the top of the column:
You can also submit an wish at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service provided.
Thanks for your understanding.
Regards
Vicky Liu

Unable to change data source of any report

Hello there,
I am using the Crystal Reports Eclipse plugin. I added a datasource to Eclipse 3.3 which connects to a Oracle database using JDBC.
Now I want to change the data source of a report. I get a popup window which displays the old data source with all tables and columns on the left side. On the right side of the window I see the name of the new data source at the top, but a list of "remove" options below it with a red cross in front (see screenshot).
It does not matter if I want to change an existing report or a new report.
I can create a new report with a datasource, but even when I want to change to the same datasource as already assigned to the report, I get the problem described above.
I already followed some tips found in this forum, e.g. expanding all used tables in the data source explorer etc., but this did not help.
I know that there was also a possibility to remove the "data source" information completely from the query (as mentioned at http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do;jsessionid=2F140BDBA03E8E97EEF1E15F84964F12?cmd=displayKC&docType=kc&externalId=c2017570&sliceId=&dialogID=13402443&stateId=1%200%2013406567), but I cannot find this option in Crystal reports for Eclipse. I see a field "qualified name" in the properties of each table of my report, but this field is read-only...

Doesn't anyone have an answer to this problem? I would just like to change the datasource of a report. But I am not able to do so, because the only option I have in the dialog is to remove all tables.
I just saw that the screenshot is missing. See it here:
http://img119.imageshack.us/img119/4999/pic1dh1.png

Unable to change date selections in data selection tab

Hi experts,
I'm new here, i scheduled the init load with date selections in the data selection tab, i successfully loaded the data and now i want to go for the delta but i'm unable to delete the date selection in the data selection tab. what problem is this.
can we load the data with the same selections in delta update ? how can we delete the date selections
orelse nothing happens even if there is a selection in the data selection tab? the date is a past one.
help me out plz
regards

delta loads copy the selections from the init load.
Often while scheduling delta loads u will see a message 'selections copied from the last init load'.
cheers,
Vishvesh
Message was edited by: Vishvesh

Unable to change data source at runtime

I have a simple Crystal Report based on a MS-SQL stored procedure that takes one parameter. I developed it against my dev database, so when I run the application, I want to point it at our production database, but no matter what I do, it always calls the stored proc in my dev database. Here's what my code looks like:
// Code to set data source and launch report in viewer
CrystalDecisions.Web.Report cr = new CrystalDecisions.Web.Report();
cr.FileName = "UniformSizesByProject.rp";
this.crsource1.Report = cr;
this.crviewer1.RefreshReport();
this.crviewer1.EnableDatabaseLogonPrompt = false;
ParameterFields pfs = new ParameterFields();
ParameterField pf = CreateParameterField("@Project_ID", _projectID);
pfs.Add(pf);
this.crviewer1.ParameterFieldInfo = pfs;
this.crviewer1.ToolPanelView = CrystalDecisions.Web.ToolPanelViewType.None;
this.crviewer1.LogOnInfo.Clear();
CrystalDecisions.Shared.TableLogOnInfo logon = GetReportLogonInfo(ConfigurationManager.ConnectionStrings["PMEntities"].ConnectionString);
this.crviewer1.LogOnInfo.Add(logon);
private CrystalDecisions.Shared.TableLogOnInfo GetReportLogonInfo(string ConnectionString)
     CrystalDecisions.Shared.TableLogOnInfo logon = new CrystalDecisions.Shared.TableLogOnInfo();
     CrystalDecisions.Shared.ConnectionInfo connInfo = new CrystalDecisions.Shared.ConnectionInfo();
     connInfo.ServerName = "(MyServerName)"
     connInfo.DatabaseName = "(MyDatabaseName)"
     connInfo.UserID = "(MyUserId)"
     connInfo.Password = "****"
     return logon;
When I debug, I can verify that the LogOnInfo object is set to use my production server, the resulting output proves it is still running against my dev server. I haven't run into this in similar apps I'm working with and the only difference with this one is that it's using a stored proc rather than command SQL or hitting the tables directly.
- Robert -

Hi Robert,
Take a look at the SAP Note "[1553921 - Is there a utility that would help in writing database logon code?"|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333933323331%7D.do]
The utility provided in above SAp Note will generate the logon code for your existing report, update the logon information of the target database in the code.
Also search for the sample application 'change database at runtime' in top right corner search box.
Hope it helps,
Thanks,
Bhushan.

Get a "do not support paypal, etc" when trying to purchase apps fr my iPad, and unable to change my billing preferences

When I try and purchase apps a msg pops "...problem with a purchase and no longer will support paypal". When I try and change my billing info in the store I am unable. I cannot do anything until this problem solved. I cancelled a recurring charge and now I get this message.

Contact iTunes support at.
https://ssl.apple.com/emea/support/itunes/contact.html

Can not change data in Input Ready Query

All,
I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
Note:
1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
3. I am not using any characteristic restrictions
4. I have not set any data slices
5. I have set the property for Planning "Start query in Change Mode"
6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
7. I do not have currency/unit in row/column.
8. There are any locks occurring
Any pointers welcome.
Thanks,
Milind

Hi Milind,
Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
Have cross checked all the points that you mentioned in this post but I cells do not change.
There should be some way around to solve this problem.
Thanks

Unable to change the data in PSA

Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok

Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column

Unable to change the data source of SAP system

Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
Paresh

Hi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue.

I downloaded a widget from apple and was unable to open it because a window appeared telling me that the developer was unidentified. How do I change the security preferences that allow me to only install apps from the Mac App Store?

I downloaded a widget from apple and was unable to open it because a window appeared telling me that the developer was unidentified. How do I change the security preferences that allow me to only install apps from the Mac App Store?

go to system preferences - security and privacy - under allow applications downloaded from - click on anywhere.

I am unable to change the preferences on my Premiere Pro CC 2014 program...Please help!

Hello, I use Premiere Pro CC 2014 on my Mac Computer. I am unable to change the settings in the preference of Premiere Pro. When I change a setting and click "OK" Premiere doesn't respond. I can click cancel and the window closes, but when I click ok the window does not close. Since Premiere doesn't respond when I click ok, any setting that I have changed remains the same. I tried reinstalling the program, but after the installation I still have the same issues. Does anyone have a solution?

Hi,
What preferences exactly? Are you trying to change them under Premiere > Preferences? What OS are you on? Can you please attach a screenshot?
Thanks,
Rameez

I am trying to download UCbrowser which is fine on my iPhone 5C but unable to download on my iPad2, It shows on cloud but I couldn't download, I tried to change date but still no go, It says "you've already purchased this so this will be downloaded now"

I am trying to download UCbrowser which is fine on my iPhone 5C but unable to download on my iPad2, It shows on cloud but I couldn't download, I tried to change date but still no go, It says "you've already purchased this so this will be downloaded now" but never downloads

Close the App Store app, reset your iPad and then try again.
To close the App Store, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

IOS4 update issue - Date showing year 2523 BE (unable to change to 2010)

I just updated my iphone 3GS last night and noticed the year date as being 2523 BE and am unable to change it back to 2010. I can change it back and forth a few years from 2523 BE but not able to roll down to 2010.
No other issues seen, iOS4.0 update wen through without any problems.
Anyone else seeing this or have any ideas whats causing this?
Cheers
ozgazl

Solved: I found out my calendar setting was set to Buddhist hence the '2553 BE' date.
I reverted back to Gregorian and all ok now. My phone hasnt gone dead after this either. Weird hey.
Topic closed.

Deleted Rows Flashback : unable to read data - table definition has changed

Hi All,
Its Really Important.
I Unfortunately truncated a table using
Trancate table mytable;
and Made a alter table to decrease data pricision length.
But i Need the tabla data back,
i used the below command to get deleted rows, it shows error.
query : select * from pol_tot versions between timestamp systimestamp-1 and systimestamp;
error : ORA-01466: unable to read data - table definition has changed
query : flashback table pol_tot to timestamp systimestamp - interval '45' minute;
error : ORA-01466: unable to read data - table definition has changed
Kindly Share your ideas How Can i Get thoose Deleted Records.
Edited by: 887268 on Jul 8, 2012 12:26 AM

BluShadow wrote:
Khayyam wrote:
Flashback dont works after DDL. Truncate command is DDL. Only recover from backup can help.Please don't spread untrue statements.Working of flashback after Drop command is so clear to say. I mean such DDL commands as CREATE, ALTER, TRUNCATE and so on...
"Remember that DDLs that alter the structure of a table (such as drop/modify column, move table, drop partition, truncate table/partition, and add constraint) invalidate any existing undo data for the table. If you try to retrieve data from a time before such a DDL executed, you will get error ORA-1466. DDL operations that alter the storage attributes of a table (such as PCTFREE, INITRANS, and MAXTRANS) do not invalidate undo data."
[http://docs.oracle.com/cd/B28359_01/appdev.111/b28424/adfns_flashback.htm#BJFJHDAG]

Z22 Unable to change date in Preferences

Similar Messages

Maybe you are looking for