Z22 will hotsync with Desktop but not Outlook ???why???
No device
Added Microsoft Outlook to my PC, so would be ready for potential iphone purchase - my first smartphone. Was so excited that I would be able to port over my calendar and address book information from my Palm Z22 to the new smartphone.
uninstalled (using revouninstaller) Palm Desktop, since I read that I needed to have Outlook installed first and needed clean install in order to be able to change the method of hotsync from the palm desktop to outlook
Reinstalled 6.2 Palm Desktop and when I got to the screen with the choice between Palm Desktop and Outlook, I clicked the option I wanted to sync using Outlook.
First hotsync went to Palm Desktop, and left Outlook Calendar et al empty. ???why???
Second hotsync same problem. ???why???
Can't find anywhere in my hotsync manager or in the desktop or on the Z22 where I can make any changes to the hotsync....
So now I have handy dandy new version of Palm Desktop, which (still) syncs perfectly with my z22, but doesn't help me get ready for the Iphone, since I will need my calendar/address book/notes data in Microsoft Outlook in order to transfer to iphone (or any other smartphone for that matter)..
Just to reiterate, never had/have problems with hotsync process, just trying to change where the data goes......
Using Windows XP and HotSync Manager 7.0.2 and Palm Desktop 6.2 with Palm Z22
Want to sync to Microsoft Outlook 2007 (has SP2 already installed)
HELP!!!!!!!
This question was solved.
View Solution.
I did some more googling, and FINALLY found some instructions that actually worked!!!! These are from eHow entry entitled "How to Move a Calendar From a Palm Desktop to Outlook". I did NOT find this directly from Google, but rather as something in an aside in another post that led me sort of by accident to this post...
Anyway, should anyone else need to perform this manuever, here are the instructions:
Go tot he Start menu and select Programs.
Move the cursor to the Palm folder on the Programs menu
Click on the 'enable palm outlook conduits' choice.
Bingo!!! It fixes the outlook conduits, and then you are set.
REMEMBER, IF YOU ARE NEW TO OUTLOOK, AND YOU WANT TO TRANSFER THE INFORMATION FROM YOUR PALM, YOU NEED TO GO INTO THE HOTSYNC MANAGER UNDER APPLICATIONS AND FIX EVERYTHING TO GO FROM HANDHELD TO DESKTOP RATHER THAN SYNCHRONIZE. synchronize is the default. that would give you everything blank, i.e. lose your data.... not a good idea.
Beware that the first sync from handheld to an empty outlook can take a LOOOOONg time, if your calendar goes back for years on your Palm like mine does....
I now have everything in Outlook.
Case solved!
Similar Messages
-
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
When I click on pictures on eBay and Facebook...it will not show pictures/enlargements...just blanks....will work with IE. NOT ff
You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Hi my road runner mail works with mail but not outlook for mac?
This problem seems to have popped up after updating to Lion. I like outlook because I use it at work and I like the calander right there. My exchange account for work and gmail account function well but road runner is an issue? Does any one have experience with this issue?
Sounds to me like the mail server you're trying to reach is not reachable when off the netwok it lives on. This is pretty common of you're using e-mail provided by your ISP. It's done to help control spam relaying through their servers. Contact the mail provider for the correct server settings to use on a mobile device.
-
Program will run with errors, but not at all in a .jar file
First off, here is my program right now:
import java.io.*;
import java.util.*;
import javax.swing.JOptionPane;
public class prune
public static void main(String args[])
String steamid="",time="";
BufferedReader infile = null;
BufferedWriter outfile = null;
FileReader fr = null;
FileWriter wr = null;
StringTokenizer strtk = null;
String line = null;
JOptionPane.showMessageDialog
(null, "Vault.ini Pruner v2");
String filepath = JOptionPane.showInputDialog("Enter the filepath to your vault.ini file.");
String strdeletenumber = JOptionPane.showInputDialog("Enter the number that vault entries under will be deleted");
int deletenumber = Integer.parseInt(strdeletenumber);
try
infile = new BufferedReader(new FileReader(filepath));
outfile = new BufferedWriter(new FileWriter(filepath));
catch(IOException ioe)
JOptionPane.showMessageDialog
(null, "Can't open vault.ini:" + ioe);
try
while((line=infile.readLine())!=null)
strtk = new StringTokenizer(line);
steamid = strtk.nextToken();
time = strtk.nextToken();
if(Integer.parseInt(time)>=deletenumber)
outfile.write(steamid);
outfile.write(" ");
outfile.write(time);
outfile.newLine();
catch(IOException ioe)
JOptionPane.showMessageDialog
(null, "Error:" + ioe);
try
outfile.close();
infile.close();
catch(IOException ioe)
JOptionPane.showMessageDialog
(null, "Error:" + ioe);
System.exit(0);
}The program is supposed to open a vault.ini file and delete entries with a number lower than specified.
Vault files are set up like this:
STEAMID:X:XXXX 100000
Right now if I run the program through command prompt it erases both the vault.ini and new vault.ini. I am also trying to put it in an executable jar file and when I do that I get a "Failed to load main class manifest attribute" error. Any ideas on what is causing this?I don't know what is happening. I put your exact code into a small build environment and used a build file for ant that I have and it works just fine. Manifest files are a total pain which is why I use a tool to generate it. I know that the last line has to be blank and that no line can be over a certain length.
You've now spent several days avoiding ant and I got it running with ant in about 3 minutes. I'm really missing something.
For reference, the build file is below should you change your mind. Put your prune.java in a new directory named "src" and save this file below as build.xml in the parent directory of "src". Run the program with java -jar lib/prune.jar
<project name="jartest" default="main" basedir=".">
<!-- location properties -->
<property name="src.dir" location="src" />
<property name="dest.classes.dir" location="classes" />
<property name="dest.lib.dir" location="lib" />
<!-- value properties -->
<property name="dest.lib.name" value="prune.jar" />
<property name="main.class" value="prune" />
<!-- compile time value properties -->
<property name="compile.debug" value="true" />
<property name="compile.optimize" value="false" />
<property name="compile.deprecation" value="true" />
<property name="compile.source" value="1.4"/>
<property name="compile.target" value="1.4"/>
<!-- build -->
<target name="main" depends="compile,jar" />
<target name="compile">
<mkdir dir="${dest.classes.dir}"/>
<mkdir dir="${dest.lib.dir}"/>
<javac srcdir="${src.dir}"
destdir="${dest.classes.dir}"
debug="${compile.debug}"
deprecation="${compile.deprecation}"
optimize="${compile.optimize}"
source="${compile.source}"
target="${compile.target}" >
</javac>
</target>
<!-- clean -->
<target name="clean">
<delete dir="${dest.classes.dir}"/>
<delete dir="${dest.lib.dir}"/>
</target>
<!-- jar -->
<target name="jar" depends="compile">
<jar destfile="${dest.lib.dir}/${dest.lib.name}"
basedir="${dest.classes.dir}">
<manifest>
<attribute name="Built-By" value="${user.name}"/>
<attribute name="Main-Class" value="${main.class}" />
</manifest>
</jar>
</target>
</project> -
How can I move movies from my computer to my iPad? They will play in quicktime but not iTunes
How can I move movies from my computer to my iPad? They will play with quicktime but not iTunes so I can't sync them
Th AVPlayerHD works well for playing other video types. You can transfer the videos via USB in the app tab in iTunes on your computer. When you open that tab when you have you iPad connected to the computer scroll down and you will see apps listed on the left and a blank on the right. Click on the app and then click on the add button under the blank window on the right. Then navigate to the video you want to play and it will transfer it to the iPad. I have about 14 movies on mine using AVPlayerHD. works very well. Also have VLC player (before it was yanked from the app store). Works about the same.
You can also get the app Air Video and stream the video to from your computer to the iPad, and even have Theo ad connected to the tv to watch on there. I do that all the time with my iPhone. Saves time with not having to sync movies all the time. -
My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.
Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!! -
IPod Classic 80GB shows on desktop but not in iTunes, so will not sync
My work Mac has just been upgraded to 10.5.8, and with it iTunes to 10.1. Now, when I connect my iPod, it appears on the desktop but not in the iTunes panel. As such, it won't sync any new content.
There is no problem with the cable, as the iPod charges while connected. I've tried resetting the iPod about a dozen times, which has no effect (once in a while the iPod says it is synchronizing, but this only lasts a few seconds and then disappears). Is there anything else I should try before I take the big step of formatting the iPod? I'm reluctant to do this because at the moment I at least have an iPod full of music - if I format and it still won't sync, I'll have a useless empty black box! Is it possible to go back to the previous version of iTunes which was syncing fine?Have you seen this?
iPod appears on the Mac OS X desktop but not in iTunes. -
2nd Gen Ipod will sync with itunes but will not download new song
My Ipod will sync with itunes but will not download newly purchased songs. It is Ipod nano 2nd gen.
If you want to use automatic syncing, you may need to set up or update the iPod's Music sync settings in iTunes. If the new songs are not included in what gets synced to the iPod, they will not sync.
If the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod appears in the sidebar, under DEVICES. Select it there, to show its Summary screen to the right. Toward the top, there is a bar of buttons, starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music, if not already checked. This is the "switch" to enable automatic syncing for songs.
NOTE: If Sync Music is not already checked, that means the iPod is currently set to Manually manage music. Setting up automatic syncing will replace the iPod existing content. If you want to add the new songs manually to the iPod (instead of using automatic syncing), please post back.
If your iTunes library fits on the iPod, you can choose the option to sync Entire music library. Otherwise, choose the option to sync Selected playlists, artists, albums, and genres. Below that, select (checkmark) what you want to sync to the iPod from the lists.
One convenient way to set this up is to first create one or more playlists in your iTunes library, with ALL of the songs you want on the iPod. Or you can use existing playlists. Back on the iPod's Music screen in iTunes, select those playlists under Playlists.
When you click Apply, iTunes syncs the songs in your selection(s) to the iPod (replacing its existing content). Going forward, to update the iPod, you can just update those playlists in your iTunes library (add/remove songs). If you have new songs, add them to a playlist that is synced to the iPod. The iPod does not need to be connected. The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates your iPod with the same changes. -
PL/SQL will compile with warnings but will not run
I have a pl/sql package that will compile with warnings but no errors but when i try to run it I get an ORA-6508 error telling me there is an error somewhere in the package but I can't find it.
I have two user schemas that use 2 slightly different versions of the package. I had to make slight code changes to one of the versions and when I made those changes it stopped running. The second version compiles and runs correctly.
After going through a line by line comparison the first copy was still not running. I copied the second version of the code into the broken schema and commented out the additional lines of code that are not needed in this version.
When I tried to compile and run this version it still fails with the same error.
I am using Oracle XE and the databases are small.
I can send on the code if necessary.
Can anyone point me in the right direction?
Thanks
SusanI tried doing what you suggested but there are no errors as it is compiling correctly.
It is only when I run the package through the debugger that I get the error. I have posted it below
Connecting to the database Hess S3.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '127.0.0.1', '2086' )
Debugger accepted connection from database on port 2086.
Processing 59 classes that have already been prepared...
Finished processing prepared classes.
Exception breakpoint occurred at line 10 of BnmSkOTQ3jz5I52ZOxC4QNw.pls.
$Oracle.EXCEPTION_ORA_6508:
ORA-04063: package body "SHIPPING.LIFTINGSCHEDULE" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SHIPPING.LIFTINGSCHEDULE"
ORA-06512: at line 10
Process exited.
Disconnecting from the database Hess S3.
Debugger disconnected from database.
Regards
susan -
I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.
I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!
-
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
"save optimized as" window in save for web shows desktop but not correct folder
In "where", it shows desktop, with the icon of a folder, and not the name of the folder the picture is in, as is usual, if I cick on the pop down menu,{of the where field) at the bottom i am showing recent places in gray, and then the name of a folder which is on the desktop, but not the one the picture is in. I want to keep the picture in the same folder.
I have been saving for web no problem recently. i quit PS and shut the computer, nothing
PS cs3 10 0 1
in the save as window I have no problemThere's another "drop down" in the save window. To the right of the file name (Save As: field), if you click that arrow, it will allow you to browse to ANY folder or location on the HD to save.
-
Problem: Flash movie plays on desktop, but not on website
Hi, I'm new to Flash but have successfully created a Flash Movie that works using Firefox and Safari on my (iMac) desktop, but not after I upload to my website.
I started with an flv video, imported it into an fla document along with a playback skin then published it creating an html file and two swf files. I've checked the html file, and it looks fine. The flv file is only 17MB and I've uploaded all 5 files to my site on:
http://www.cantata.co.uk/temp2/minorswing.html
but all I seem to get is the control skin's "sending data" pole turning.The movie never arrives. I can get much bigger mpeg and wmv movies up on my screen very quickly.
Can anyone suggest what the problem may be? I'm running Snow Leopard on my Mac (OX 10.6.6). I've tried using different videos but nothing seems to work.
Here's the relevant html generated by Flash
<div id="flashContent">
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="640" height="390" id="minorswing" align="middle">
<param name="movie" value="minorswing.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<param name="play" value="true" />
<param name="loop" value="false" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="minorswing.swf" width="640" height="390">
<param name="movie" value="minorswing.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<param name="play" value="true" />
<param name="loop" value="false" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />
<!--<![endif]-->
<a href="http://www.adobe.com/go/getflash">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
</div>
Many thanks if you can help
SteveThanks - I don't know what as2 is. I'm using Flash CS5. When I import the flv movie file, I'm asked to choose a skin and then a window comes up to tell me that the address of the flv file with respect to the other files will be minorswing.flv by which I take it to mean that all the files need to be in the same level of folder (directory). All five are in the same folder on my Mac and in the same folder on my website. I can't see how I can influence the program in choosing a different structure or outputting different html in the Publish Settings or elsewhere.
I would have expected the relative structure of the files to be maintained between my desktop, where I can play the movie in my browsers, and the website, where I can't. I was surprised there was no "src" param name in the html, and I did try inserting one, but it made no difference, so I assumed the default for the html is to be in the same folder as the html and that the minorswing.swf file would contain information on the whereabouts of the flv file and the skin swf file.
Is there a way of reading or editing the swf files to include an absolute url? -
3G iPod Shows up on Desktop but not in iTunes
I am having the same problem with my 3G iPod. It has been working flawlessly for many years but I tried to mount it and update my songs and it will show up on the desktop but not in iTunes. It does show up in the system profiler. I reset the iPod via the updater and keypresses. I trashed the plist files for the iPod and iTunes. Still nothing. I switched my firewire cables to different ports. Nothing.
What was strange was that Yami-pod does not see it as an iPod either so it is not just iTunes.
My iPod shuffle works just fine and mounts right away in iTunes.
This is on my eMac where I store my music. I have not tested it yet with the Macbook.I tried hooking the iPod to the MacBook and it worked like a charm. I then moved the iPod back to the eMac and I still had the same problem. At my whits end I decided to zap the PRAM with the Command-Option-P-R trick and to my surprise the iPod launched iTunes and started syncing when I restarted the eMac.
I had no reason to think that there could be a problem with the PRAM as I did not have any other problems but it does seem to have been the problem.
Maybe you are looking for
-
How do I restore my itunes library on a new PC?
I recently had my PC windows XP reinstalled as I had a virus. I think I saved my iTunes library however as my external hard drive shows that I have an ITunes folder and in it is an iTunes library. In the iTunes folder is a sub folder called iTunes m
-
I can hear sound, but no pictures, on some news internet locations.
Greetings to all, I have a Windows 7 64--bit laptop. I can hear sound but no pictures. Why is that ? Thank you. Ldxrunner. Solved! Go to Solution.
-
How can I get my accurate DOB on Your Account Page?
On the Your Account page the year DOB stops in 1942. Why? Aren't those of us who are older allowed to have a Your Account page?
-
Hi all, I have a database with oracle 10g R2 (10.2.0.1.0) version on RHEL5 server. I like to update the patchset for this, which one i go for, 10.2.0.5 or 10.2.0.4. pls. suggest me with suitable. thanks and regards.
-
Iphone won't restore. keep getting error (1)
Hello, I have a iphone 3gs 32gb running ios 5.0.1. It recently stopped working so i tried to restore it. I keep getting error code (1). I have tried over 15 times on 3 computers with 4 different usb cords. I NEED HELP!!!!!! Thanks,