Z3 bluetooth amd wifi not working together

hello , the bluetooth and wifi is not working together, when streaming videos through wifi and audio is connected to the bluetooth outspeaker , wifi connection drops for 30seconds and re-connecting , Sony please fix this bug.. than this phone is good. till now. 

Hi I had the same issue a Week back with my Sony Xperia Z3 compact -- Model # D5833. 
An auto software update in lollipop and the Wifi and Bluetooth stopped working.
After speaking the the customer service expert (on chat) --Xperia Support center--  initially he advised me1. To start the phone in a safe mode -- (press the power button for 3-4 secs you get the option) but that didnt help.2. Next he asked me to do a repair through Sony Companion which I had installed on my laptop --- did it --reinstalled the whole software after wiping the complete software including cache--but to no avail.3. Finally when he had no solutions left.. he asked  me to show it at the authorized Sony service center as it was under warranty.
I followed his instructions as did not want to experiment with my 7 months old handset, went next day to the Sony authorized Service Centre India (Mumbai) (17th Aug'2015) they said its a software problem and needed a day to rectify. But when I called them the next day to check on my phone status, they shared its a hardware problem and have sent across to another center which will do the hardware repair and will take maximum a week.  So the week is going to end after a couple of days....I will keep you guys posted on the update. The suggestion which I would like to share is, if you are having a similar problem run and go to the authorized service centre and leave the rest to the experts, without experimenting yourself.
So once I will receive my handset in a weeks time ....I will share you the status....on the exact issue with the device.

Similar Messages

  • I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

    i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

    Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue. 
    Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
    Fixing Bluetooth Issues
    These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Bluetooth and wifi not working

    my wifi and blue tooth is not working and i could not turn on my bluetooth , i tried reinstalling my drivers ,went to change pc setting and tried to turn on my blutooth bt its not happening. i tried to restore my system to earlier point then also it didnt worked,please help me asap .

    Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are having an issue with your WiFi/Bluetooth, and wanted to assist you! Please review the following documents, as they may help to resolve the issue for you:HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)HP PCs - Understanding and troubleshooting Bluetooth wireless technology (Windows 8.1, 8, 7, Vista, XP)HP Pavilion and ENVY Notebook PCs - PC Does Not Connect to Wireless Network and Yellow Icon Next to Bluetooth Device in Device Manager (Microsoft Windows 7, 8, and 8.1) Please let me know if this information was helpful by clicking the thumbs up below.
    Have a great day!

  • HT1695 Bluetooth and wifi not working

    Hi all
    I have an iPod touch and for some reason the wifi and Bluetooth has stopped working, I have done a full restore and reset the network setting but to no avail. For reference my iPad and iPhones are working perfectly, the software is up to date. Any body found a solution to this?

    Is this the problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If so it is frequently a hardware problem an an appointment at the Genius Bar of an Apple store is in order.

  • Photosmart C6180 Wired and Wifi not working together

    I recently reinitialized my Photosmart C6180 all in one. Since then I can either use it wired or wireless, but not both at the same time as was the case before. Wireless printing works fine when I unplug the network cable. Once I plug it again, it stops printing wirelessly.
    The printer name on the network is HPC61890. I can see it assigned an IP address in my router for both the wired card (.34) and wireless radio (.35). The IP for wireless can only be pinged when the cable is unplugged.
    Any idea how to fix this?

    Hi Danyk,
    I would like to help you with your connection issues. You can connect your printer wireless (on a network) and via USB. But you cannot connect wireless and wired (ethernet). Once the ethernet is plugged in it automatically turns off the wireless.
    If you could tell me what operating system you are running I can send a link for the up-to-date software and drivers.
    Thank you,
    I worked on behalf of HP.

  • Bluetooth Mouse and Thinkpad T520 not working together at all

    Hi All (first post),
    System:
    Lenovo T520
    Windows 7
    Microsoft Bluetooth mouse
    Problem: Not working at all, or working only sporadically.
    History: Laptop is a bit over year old (warranty ends in June 2015 IIRC). The sales clerk recommended a bluetooth mouse, so I bought a Microsoft Bluetooth 5000. After the initial pairing difficulties were resolved, they worked swimmingly for about a year. Then I started more and more frequently having to re-pair them (remove device, let Windows find it again, pair them,...). As the mouse had taken a bit of beating, I bought another one a week ago. Didn't really help. The first time I asked Win7 to find the device, it couldn't. The Bluetooth radio was on, and the mouse had a fresh set of batteries, and all the other braindead suggestions of Win7 were eliminated. The bluetooth radio was working, because it detected the neighbors daughter's smartphone through a concrete wall, but not the mouse. I kept pressing the button in the bottom of the mouse that presumably makes it broadcast "I'm here".
    I moved to another room. This time detection and pairing up the device went fine. But after I had switched the laptop and the mouse off, and rebooted - nothing happened. I had to go through the remove/add device cycle again. Moving to a different room again. At first nothing. Then Windows finds the device, but gives the error code 0x800070015 (or something like that, not sure about the number of zeros), and fails to configure it.
    Any idea what is going on? Why is this becoming progressively worse?
    Elsewhere in this forum it was suggested that I should disallow windows to power off USB root hubs. I tried that but it had no effect.
    Regards,
    Jyrki

    Sorry. The error code was 0x80004005. This is the code I get from Add Device ->, when I try to enter 0000 as the paring code (suggested by the mouse start guide. If I try to pari them without a code, Control Panel first indicates that the piece of Hardware was added ok, but it before I get any use out of the mouse, the freshly added pic of the mouse disappears. The red/green light on the mouse never stops blinking.

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • Network controller& USB controller driver not found and wifi not working

    hello  I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop  .  i have installed all driver from HP site here is the link  http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1  but still netwok controller driver not found also wifi not  working  i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly  univeral serial bus driver(usb) controller   not found i installed all drivers from above link  also update windows  but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03  and last i am unable to download  AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU    

    Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted.  Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver.  x86 - Win7
    [BROADCOM.NTx86.6.1]
        %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
        %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C       
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1

  • MY WIFI NOT WORKING IN MY LAPTOP

    hi,guys     in myn laptop model  15-s008tu notebook compaq wifi not working.....my laptop wifi key i not turn on...it is not turn in to red to white.....i install wireless manager...but in manager divic not found for the action section....   how to solve problem.......tell me 

    Hi: Did you install the wireless and bluetooth drivers you need for the model wireless card your notebook has? http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_131223_1 http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_130390_1

  • How to fix iphone 4s wifi not working

    How to fix wifi not working on iphone 4s after it is updated to ios 7 ?
    Here is what fixed my wife's phone after several weeks of no wifi. We had removed the Sims card and transferred to another phone which was running ios 6. My son was visiting and said Apple had come out with an update a few days ago and he decided to attempt to install it on the 4s phone that had no wifi and no cellular because the sims card was removed. He tapped the icon to update the new ios version and received the message to the effect that No WiFi available would you like to search for available networks. He selected yes and immediately the wifi came on and has been working now for two days. Also we never installed the update to the new ios.
    My advice is to remove your sims card like we did or trun off your cellular and attempt the update to see if you get the message to search for available networks and then of course choose yes. Go figure. Hope this works for you.

    Read this http://support.apple.com/kb/ts1398

  • Edege animate: Parallax and Spotlight = Not working together?...

    Hi all,
    This is my first post, and sorry for my English :))
    I am learning, and have a small composition on Edge Animate CC 2014 on Scrolling Parallax, which works very well, and now I want to add a spotlight... but do not working together.
    My code is:
    Stage: 1920 x 2000
    Autoplay: No
    -- creationComplete: (nothing)
    -- compositionReady:
    EC.Parallax.setup(sym);
    On scene:
    A Text (is for launch the spotlight with the click function):
    Action for "Text":
    -- click
    // Open image in spotlight overlay
    // Set up configuration
    var config = {
    width: "1024",
    height: "768",
    type: "image",
    source: "images/dog.jpg"
    EC.Spotlight.open( config );
    My problem is that the parallax works great, but when I make a click on the button that showing the spotlight... this is not released, and "dog.jpg" picture it is show on the bottom of the page (without spotlight).
    What am I doing wrong?
    Note: I charge via url the "All in One" of EdgeCommons CDN : http://cdn.edgecommons.org/an/1.1.2/js/min/EdgeCommons.js
    Many thanks!

    Ok. I've solved. I needed to load some things:
    EC.Parallax.setup (sym);
    The full code (that works for me) is:
    -- compositionReady:
    EC.Parallax.setup(sym);
    // Load Edge Commons
    yepnope({
    load: [
    "http://cdn.edgecommons.org/an/1.1.0/js/min/EdgeCommons.js",
    // Load style sheet for the overlay
    "http://cdn.edgecommons.org/an/1.1.0/css/style.css"
    -- click
    // Open image in spotlight overlay
    // Set up configuration
    var config = {
    width: "1024",
    height: "768",
    type: "image",
    source: "images/dog.jpg"
    EC.Spotlight.open( config );
    I hope to serve others.
    Regards

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • Hi,my iphone is not recognized and it says- AMDS its not working

    hi, i have a problem, my iphone is not recognized and it says that AMDS its not working so i restarted and it is set to automatic startup....but it still isnt working! so my question is can i reinstall my itunes? wont it affect the tings i have in it (i mean my pic and stuff)? im asking cos i remember that itunes always deleted my stuff on my ipod? and i gues i have forgoten my backup pass.....thank u very much for help

    Hi Ken,
    Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
    I am looking at a product called wmobile, but may be problematic on my current system.
    thanks for any help...

  • Iphone 3G wifi not working after upgrade

    Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

    You are not talking to Apple. This is a user to user forum.
    If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

  • My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare. They will help you.
    Best.

Maybe you are looking for

  • How can I avoid ending up in Junk/Spam folders

    Hello, I wish to send out emails using "mail" to some art galleries and I am concerned about ending up in peoples junk/spam folder. Can anyone tell me what are the most likely characteristics of an email that will send them directly to someone's junk

  • Web service transported but not active in QA environment

    Hi all, In order to support a template document i've created a web service using the web service tool. All is working fine in DEV and all has been successfully transported to QA environment (I think). The web service objects have been included in the

  • PI 7.1 upgrade related issue (With removeContexts node function)

    Hi all, We have upgrade from PI 7.0 to 7.1, there was no changes done to the maps...but when we execute the old maps it give no value in the queue error: (this occurs during run time)... But when I test the payload it executes fine...I have found and

  • Xcelsius 2008 - Known Issues (Application)

    AA: Area Affected PD: Problem Description WA: WorkAround AA: How to recover from an Xcelsius crash PD: If Xcelsius crashes during use, it may leave an orphan Excel process running in the Windows Task Manager. This is most often seen when you can't re

  • Settings for Material shortage status (MSPT) in PM orders

    For the purpose of material availability check in PM order, i have made the settings in IMG (OPJJ,OIOI). Still i am getting error that "No Checking group maintained for production (Component) in Plant xxxx. I have maintained the availability check in