Z3 Camera quick shot button not working

Hi. I´m trying to use quick shot button with my Z3. Bought 2 days ago. I can feel to different "clicks" and on the first click it focusec pic but with the second it does nothing. It doesn´t open camera software when it is turned of. I have quick laund enabled so that ain´t the problem. Starting to feel that have to go to repair shop with this

That's odd, how about 
settings > apps > all > camera > clear data > check again 
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Quick Launch Buttons not working on dv7-3085dx

    Hello HP world.
    I am having a problem that I cant fix it myself and it is driving me crazy.
    I am very techy and usually always find a solution to any problem but this one got both of my feet locked.
    My Quick Launch Buttons on my DV7-3085dx  Running Win7 64-bit.
    Are not working. They were working fine since forever until 2 weeks ago I noticed the mute and wireless buttons remained red non stop? and they were not functionable. Almost as if they lost connection to the notebook.
    This is what i have tried so far:
    - Hard reset (after i did this the red mute button and wireless went off, now only volume and media controls are on, still useless)
    - Updating the QuickLaunch Buttons Driver
    - Updating the BIOS
    - Reinstalling MediaSmart
    - New Chipset Driver
    - Installing latest IDT driver
    - probably other drivers and such which i cant remember but its been over a week that i have been reading online and it came down to this.
    I surrender!
    Please help me.
    Thank you in advance.
    Fitim

    Fitim wrote:
    So i just finished with the System recovery and no luck
    The buttons are still not functioning. I just get the audio and player controls lid up but thats it.
    They dont work and are useless.
    HELP
    If they're not working after performing the System Recovery then it's a hardware problem.  Could a loose or damaged cable or circuit board. 

  • Dv7-1130us - Quick Launch buttons not working - though they light up correctly

    I'm trying to enable wifi, though the quick launch buttons are no longer working. They used to work, though I've had my laptop repaired at the service center (to replace the keyboard), and I also immediately upgraded to windows 7 once my laptop was returned.
    I've done a hard reset, upgraded the bios, and upgraded the quick launch button drivers, though nothing is working. When windows boots, the wifi image on the quick launch bar transitions correctly as it has always done (blue to orange - since I had I usually had it disabled before I sent it in for repair and upgraded).
    Is there a way I can enable the wifi card without having to use the quick launch buttons? The wifi card has always functioned correctly when it was enabled, and it's working properly according to the device manager. I just need to either find a way to enable it without using the quick action bar, or get the quick action bar working.
    Any suggestions? I'd rather not send it back in for repair, it's a lengthy process.
    This question was solved.
    View Solution.

    Uninstall the current HP Wireless Asistant and reboot.
    Try installing newer version of HP Wireless Assistant sp49018.exe
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • Quick Launch buttons not working on Window 8.1

    I have installed window 8.1 but quick launch buttons, which used to work with combination of FN key, for example fn+F3 key for brightness, fn+F8 for volume, fn+F6 key to lock the computer etc are not working. What is the solution?

    Farhan_Raza
    I have available a pretty extensive list and I cannot find a Quick Launch Driver for Windows 8.1.  Might be one; I don't see it.
    I use a completely different arrangement of Custom Toolbars from what most people use so I am not at all sure what constitutes a Quick Launch.
    I did find the following that may be close to what you seek:
    How to enable Quick Launch in Windows 8.1
    =========================================================================
    Possible Option - HP Launch Box Manager
    Windows 8.1 provides the following -- this program MIGHT install on your computer and it might run on your computer.  It is not rated for your system.  You may try it if you like.  Windows will tell you if the program is not appropriate for your system.
    For Windows 8.1, you might be able to use the HP Launch Box Manager:
    Close running programs, browsers, and games
    Next:
    Create a Restore Point:
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    Download / Save:
    sp63808 HP Launch Box V1.1.5
    Double Click or Right-Click on the file and install as Admin...
    The application installs in seconds and then disappears.
    Windows key (opens the Start Screen) > type anywhere, the word: Launch Box >
    Click to start the Launch Box Manager
    The Launch Box Manager will start on your Desktop and offer a list of available applications from which you can choose eight applications for your Launch Box menu.
    Once set up, the Launch Box Manager sits in your Task Bar.
    Right-Click to Edit the Manager OR Left Click to Open and access the items in your Application List.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Volume and Media Quick launch buttons not working Pavilion DV4 1100EA

    Hi,
    I recently had to replace my hard disk and reinstall windows 7 (32bit) from scratch. I have loaded HP Quick launch driver V6.50.12.1 (2009-12-09, latetest on website) but have the following issues:
    Media Quick Launch button does nothing (despite media programs been installed)
    Volume slider button does not provide the previous clicking and volume bar on the screen when being used. (I have checked that the sound is enabled in the Bios).
    I have uninstalled the Driver and reinstalled it several times, but it does not fix the issue.
    Any suggestions would be appreciated.
    Regards,
    Dave

    Hi,
    QuickPlay will not work under Windows 7 ( it was the option for Vista ) and was replaced by the MediaSmart software option.
    If the media button you refer to has a Q rather than an M, there is an alteration you can make to the registry that will allow you to launch SmartMenu from this button.
    The key is located at:
    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packa​rd\HP Quick Launch Buttons
    Modify the path for:
    QAction
    To:
    C:\Program Files\Hewlett-Packard\HP MediaSmart\SmartMenu.exe
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • After the update camera and lock button not working

    After the last update my camera just a black screen and my lock button which is on the top not working properly I cant close my Iphone.

    Apple will not repair this iPhone, you will get a perfect replacement iPhone 4S exactly like yours, except it will function perfectly.

  • [Solved] Quick launch buttons not working

    So I bought the GT60 2OC 3k IPS edition around 3 months ago and it's been working more or less perfectly. However today I haven't been able to use any of the quick launch buttons, they don't even light up when clicked on. I tried reinstalling SCM multiple times but nothing changed. Is there any easy fix solution to this problem?

    I just read about the EC reset and tried it out. It worked! Sorry for the needless thread, although I'd still like to thank the community and moderators of these forums that provide some useful information

  • QUICK PLAY BUTTONS NOT WORKING

    My DV6000 series laptop quick launch buttons are lit up but they don't work.
    Any ideas please

    Hi,
    Write down Your p/n number which is under Your computer and looks like this.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Quick play button not working

    my HP Pavilion dv4-1240tx quickplay touch button doesnot launches quickplay and the volume touch buttons doesnot show visuals and no click sound too... somebody pl help me to solve this error..

    Okay, try installing the latest version of the HP Quicklaunch Button Software.

  • Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation

    The Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation.
    Opening the dictation system preference panel makes the system preferences crash...
    The mic of that camera is the only mic I have.
    I own a Mac Pro and an old Cinema Display which has no built-in cam/mic.
    Anyone having the same issue?
    I hope this is gonna be fixed with 10.8.1.

    Hello, thank you for responding.
    Unplug and plug in back the camera does not solve this problem. I tried that before.
    But what worked was to start photo booth. Don't really know why.
    So after every restart of the mac I have to start photo booth and dictation with the QuickCam is working. ^^

  • TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

    Hi there,
    Thanks for reaching out to the community.
    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
    It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
    Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
    Best of luck!

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • Camera and flashlight does not work

    My camera and flashlight will not work after the ios 7 upgrade. I have rebootd and completely wiped out my iPhone and still no camera or flashlight. I have seen where others are having the same problem but no answers.

    I had the same problem it's definitely a software issue because the camera would sometimes work in camera apps but now I could not switch cameras at all.
    I may have found a solution of course I probably won't get credit for thanks to Apple.
    I believe the problem arises from a bug when the camera is used in lock mode, try restarting your phone with the home and power button. Then open your camera in locked mode and set the flash to auto. Maybe take a few pictures, switch the camera back and fourth, turn HDR on and off, but make sure the flash is set to auto before you unlock the phone. Heck even try playing with the flashlight.
    After I did this in locked mode to my surprise my camera and flashlight are now fully functional after I have unlocked it with the password. I'm not to sure what triggered this bug but when I first got iOS 7 and played with my phone some how I unlocked the lock screen without putting in a password. Just by using the camera and the notification and control Center, I unlocked the phone which might of triggered the bug.

  • Cannot unlock phone swipe to unlock wont work can only swipe up for control pannel and camera but no buttons will work cant even turn off and on as it wont work

    iPhone 4S. Swipe to unlock wont work can only swipe up for control pannel and camera but no buttons will work cant even turn off and on as it wont work. cannot restore iphone either as it wont let me.

    Hey Angus97,
    These are the recommended troubleshooting steps to take when you are unable to Slide to Unlock:
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    from: iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • Logitech mouse buttons not working in photoshop cc 2014

    logitech mouse buttons not working in photoshop cc 2014 winds 8.1. Is this a common problem?
    I have updated the latest drivers and have a few buttons programmed with keyboard shortcuts that used to work in previous versions of Photoshop but don't work now.
    Scrolling with mouse in bridge stopped working in cc butI see it is now working.
    any ideas?

    Many Photoshop extensions are not compatible with Photoshop CC 2014 for Adobe removed support for Flash Panels in CC 2014. Many extensions panels are flash based.  Check with the developer to see if their blendmein extension works with CC 2014.
    Adobe does not maintain Photoshop so it backward compatible with prior versions of Photoshop.  This brakes things like action scripts plugins extensions etc. Keep old version of Photoshop installed....

Maybe you are looking for