Z3 Compact calls list and sms loading slowly

Hi I have a Z3 compact D5803 that I have updated to 5.0.2. Ever since then when i open the dialer (phone) it takes a few minutes to load all the recent call list and the dialer is unresponsive. The same happens when opening the sms messages. I have done a reset and reinstall and waited 7 days and the delays still persist. Any ideas what I can do?

Do you have a LOT of sms? or call logs? Back up all your SMS, MMS and Call logs, perhaps sync them with google (check the link bellow) and then empty the messaging app > restart the phone Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

Similar Messages

8120 call list and email list resets

I have a Pearl 8120 and the call list and email / SMS list keeps resetting. It's fairly frustrating since I can't retain emails for long or return some calls.
The software is up to date and I'm using Desktop 6 (just downloaded).
Any tips would be appreciated.

1. First thing? Check the File Free at Options > Status, what is the number at File Free?
Now, leaving the device powered ON, remove the battery of your device, hold a minute, replace and reboot. What is the File Free now?
2. What is your Operating System loaded to your device?
Look at Options > About, third line down beginning with a "v.4.x.xxx"
What is yours?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Font in call list as well as individual phone details is too small. I have increased contacts but it seems impossible to increase phone caller list and individual info details of contacts ?

Is it a way to increase from iphone 5 the phone caller list and individual info details of the contacts? I can increase font for Contacts but not for the caller list nor individual info details of contacts.

No JG9, no remedy yet. Still hoping.
I'm wondering if we should ask help from RIM instead of other users, as this is obviously glitch of the device, not tips ans tricks we want to learn.

Call List and Business Transactions Syncronization

Hi Everyone:
I´m working in a IC Win CLient 5.0 implementation and I need that once the bussines transaction is saved, the corresponding call list is updated ( set to complete ). I already follow al the call list and BT syncronization customizing but still is not working.
Can anybody help me with this issue? There is something else that I have to check
Thans in advanced
regards
Allen Rios

Hi Sarasakumari:
I aprecciate that only use the reply function in order to answer and specific question not to post a new one. If you want to do that, please use the post function in the CRM Forum.
So please, I´ll still looking forward a answer for this question.
Regards
Allen

I want to b able to delete from my recent call list and set certain contacts to no ring, when is that software update coming?

I want to b able to delete from my recent call list and set certain contacts to no ring, when is that software update coming?

Can you not now set a silent ringtone for an individual contact? I can by opening the contact and changing the ringtone. Only prerequisite is to download or make a silent ringtone (Google should provide any information you need) and sync it to your iPhone.

My call logs and SMS messages display the incorrect contact details on the BlackBerry q10

Hello there!
I met serious problem like in the subject. Is anybody know what is going on ?
Best regards,
Paweł

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB34772 Call logs and SMS messages display the incorrect contact details on the BlackBerry 10 smartphone
Unfortunately, it contains nothing useful -- except for formal recognition by BlackBerry of the issue. We would then hope that a future OS release will correct it.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Call List and Creation of a Complaint as a follow-up document

Hi Experts,
I have a basic question in reference to the Call List Functionality of SAP CRM 7.0. We have to generate a list to measure the satisfaction of our customers. In this cases it is possible that the customer is very unsatisfied with the provided service and wants to open a complaint. Now my question is, if it is possible to open a complaint in the form of a follow-up document of the call list (so that the data of the customer is directly copied from the call list to the complaint - I am talking about data like Business Partner ID, etc.).
Is that possible? What is the customizing I have to do to make this possible? What are the basic steps?
Best Regards
Oliver

Hi Oliver,
Don't know if I understand correctly the question, but if it helps, here's my opinion.
Normally, we create every call of a call list associated with a document... a contact/interaction record.
So, for your scenario, I would try to create 'complaint' as follow-up document of that contact.
Then the agent makes the call and:
- If the customer don't answer or don't want to complaint, just close the contact with the respective reason
- If want to answer and have a complaint, the agent create a follow-up document of complaint type, and fill with the respective information.
Hope that helps you a little more.
Kind regards,
Garcia

Images and objects loading slowly

I built my personal website with Adobe Muse (http://www.tylerburton.me/) and there are a few issues I would like to fix. The main problem is certain images and objects seem to load slowly and weirdly when I navigate to the pages. The green navigation bar at the top of the screen as well as the background of my portfolio or the two main examples. Any advice would be much appreciated.

For the two background images, create the faded effect in Photoshop and save the images as JPEG prior to importing into Muse.
At present these two images are either transparent to begin with or have transparency applied in Muse to create the faded effect. That works visually, but results in Muse converting the images to PNG (to support the transparency) and PNG is roughly 5 times larger than a reasonable quality JPEG for this type of image. If you flatten the effect into an opaque version of the image in Photoshop, then JPEG format can be used.
I'm not seeing unusual loading of the header bar, but you might be seeing FOUT (Flash Of Unstyled Text)? It can/will occur if the browser first draws the page before the Web Fonts have loaded. The exact behavior depends on connection speed, the browser used and no doubt other factors.

Why is my iMac much slower after installing Mavericks. Windows open slowly and Apps load slowly.

Everything seems to be taking much longer. I have a late-2012 iMac with 32 GB of RAM that was blazing fast until I "upgraded" to Mavericks. Now everyithing is slow. Does it use more system resources? I would think that with that much RAM I would have plenty of headroom for the OS. Is anyone else experiencing this?

Here's my suggestion:
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
1. Intel-based Macs: Resetting the System Management Controller (SMC).
2. Repair the Hard Drive and Permissions - Lion/Mountain Lion/Mavericks
Re-download and reinstall Mavericks.
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion/Mavericks: Select Reinstall Lion/Mountain Lion/Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Can't send an SMS from missed call list

When I go the missed call list and select 'text message' to send an SMS the phone freeze for a couple of seconds and goes back to the home page....

try resetting the phone
If that doesn't work
sync up your phone so everything is backed up and then try restoring the phone
If that doesn't work
Return it to a apple store and see if they can do anything with it

Call list assignment in IC Web and SAPGUI

hi,
does anyone know why i can't seem to "view" the call list assignments in IC web? but it it can be viewed in SAPGUI?
I have created the call list and its assignments in the portal. When i log into the ICweb, i click n the Call List link, all i see is the dropdown menu for "Call List". In the "Available Call Lists" table, it is empty.
Have i missed out some steps or did something wrong?

Hi,
Make sure that your agent that are using to login into the Web IC is assigned in the call list overview.
Regards,
Patrick.

Call list in ICWC and SAPGUI

hi,
does anyone know why i can't seem to "view" the call list assignments in IC web? but it it can be viewed in SAPGUI?
I have created the call list and its assignments in the portal. When i log into the ICweb, i click n the Call List link, all i see is the dropdown menu for "Call List". In the "Available Call Lists" table, it is empty.
Have i missed out some steps or did something wrong?

Hello,
Goto Transaction: CRMD_TM_CLDIST.
Select your call list, and in the General tab put your LOGIN ID as the Responsible User, and in the Interaction Center field enter the Organization to which your USER has been assigned for IC Web Client.
Then the Call list will be visible in the Available Call List table.
Regards,
Khushboo
<b>Reward points if it helps!</b>

BP_CONFIRM does not triggers the event properly from call list

Hi expert,
We have upgrading CRM 5 to 7.
The issue is. In the IC_AGENT role. When i got to call list and select a call. The corresponding bp is automatically conformed.
But then when i go to Account identification navigation link i can only see the bp confirmed. the vehicle info of the BP are not displayed the view remains the same. normally it displays the vehicle details in the result view.
If i directly search for a BP and conform it all the vehicle detail are displayed in the result views.
It happens only when a BP is automatically conformed by selecting from the call list.
But in both the cases the Method "CL_CRMCMP_B_CUCOBUPA_IMPL->BP_CONFIRM" is triggered ( it is a customer control in CRMCMP_BPIDENT/CuCoBuPa )
the difference i can find is.
if i conform a bp manually from the account identification screen. the CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT is triggered. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" ) which displays the required view.
but when the same BP_CONFIRM is triggered automatically from the call list management view it is not triggering CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" ).
so i can see the difference in the event listeners of the 2 process.
below is the piece of code which triggers the event. it is in the method "CL_CRMCMP_B_CUCOBUPA_IMPL->BP_CONFIRM" d ( it is a customer control in CRMCMP_BPIDENT/CuCoBuPa )
raise event BPConfirmed and/or CPConfirmed
    IF lv_bp_confirm EQ abap_true.
      CLASS cl_crm_ic_services DEFINITION LOAD.
      CREATE OBJECT event.
      event->set_name( if_crm_ic_events_con=>gc_bpconfirmed ).
      event_srv = cl_crm_ic_services=>get_event_srv_instance( ).
      event_srv->raise( event ).
    ENDIF.
Can any one help me how to register the event or trigger the CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT is triggered. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" )
when i click on call list.
thanks in advance
chella.

Hi expert,
We have upgrading CRM 5 to 7.
The issue is. In the IC_AGENT role. When i got to call list and select a call. The corresponding bp is automatically conformed.
But then when i go to Account identification navigation link i can only see the bp confirmed. the vehicle info of the BP are not displayed the view remains the same. normally it displays the vehicle details in the result view.
If i directly search for a BP and conform it all the vehicle detail are displayed in the result views.
It happens only when a BP is automatically conformed by selecting from the call list.
But in both the cases the Method "CL_CRMCMP_B_CUCOBUPA_IMPL->BP_CONFIRM" is triggered ( it is a customer control in CRMCMP_BPIDENT/CuCoBuPa )
the difference i can find is.
if i conform a bp manually from the account identification screen. the CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT is triggered. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" ) which displays the required view.
but when the same BP_CONFIRM is triggered automatically from the call list management view it is not triggering CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" ).
so i can see the difference in the event listeners of the 2 process.
below is the piece of code which triggers the event. it is in the method "CL_CRMCMP_B_CUCOBUPA_IMPL->BP_CONFIRM" d ( it is a customer control in CRMCMP_BPIDENT/CuCoBuPa )
raise event BPConfirmed and/or CPConfirmed
    IF lv_bp_confirm EQ abap_true.
      CLASS cl_crm_ic_services DEFINITION LOAD.
      CREATE OBJECT event.
      event->set_name( if_crm_ic_events_con=>gc_bpconfirmed ).
      event_srv = cl_crm_ic_services=>get_event_srv_instance( ).
      event_srv->raise( event ).
    ENDIF.
Can any one help me how to register the event or trigger the CL_ICCMP_AU_VEHISEARCH_IMPL->IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT is triggered. ( which is inside the "ICCMP_AUTO_VEHI/VEHISearch" )
when i click on call list.
thanks in advance
chella.

IPhone 5s outgoing call list unknown random phone numbers

I got a call from a friend yesterday, when I hung up it was a different phone number that what they had called me when I picked up the phone. I checked my outgoing phone call list and there are a bunch of phone numbers from all over the country. What is going on, the phone I got a week ago brand new from the local verizon store.

Had same issue as other weak and dropped calls. Sent me new phone but there ** means I will need to go to the store which I dread. Cannot remove sim card with paper clip. Geez I have had it with this upgrade!

10.2.0.424 search partial number in the call list doesn't work

The scenario is this
I remember I've been call from one number.
I only remember one part of the digits
Let's say 6532
I go to call list and go to use the search function
No results, but scrolling the call list and wasting a lot of time, I see that I was remembering correctly that number.
What is The point of having databases and a search function that doesn't work?
Thank you for replies and opinions
Cor

Toggling these items to OFF in the Hub settings prevents the messages from these sources from appearing in the main Hub view. This does not (currently) remove them from the Hub entirely. It's possible we may see that option in an upcoming OS release.

Z3 Compact calls list and sms loading slowly

Similar Messages

Maybe you are looking for