Z3 Compact scenes not working in manual camera mode

Hi. That's my problem: when I use manual camera, the scn button is grey and not working, so the HDR. They worked when I bought the phone, at Christmas... No mod root etc. Please help me!
Solved!
Go to Solution.

http://support.sonymobile.com/global-en/xperiaz3compact/userguide/Using-still-camera-settings/
 It has to be set on Manual mode at 8mp 
HDR
Use the HDR (High Dynamic Range) setting to take a photo against strong back light or in conditions where the contrast is sharp. HDR compensates for the loss of detail and produces a picture that is representative of both dark and bright areas.
This setting is only available in Manual capturing mode.
ISO
You can reduce image blurring caused by dark conditions or moving subjects by increasing the ISO sensitivity.
Auto
Sets the ISO sensitivity automatically.
50
Sets the ISO sensitivity to 50.
100
Sets the ISO sensitivity to 100.
200
Sets the ISO sensitivity to 200.
400
Sets the ISO sensitivity to 400.
800
Sets the ISO sensitivity to 800.
1600
Sets the ISO sensitivity to 1600.
3200
Sets the ISO sensitivity to 3200.
This setting is only available in Manual capturing mode.
Metering
This function automatically determines a well-balanced exposure by measuring the amount of light striking the image you want to capture.
Centre
Measures the centre of the image, and determines the exposure based on the brightness of the subject there.
Spot
Adjusts the exposure in a very small part of the image that you want to capture.
Face
Measures the amount of light on the face, and adjusts the exposure so that the face is neither too dark or too bright.
Multi
Divides the image into multiple regions, and measures each region to determine a well-balanced exposure.
This setting is only available in Manual capturing mode.
Image stabiliser
When taking a photo, it can be difficult to hold the device steady. The stabiliser helps you by compensating for small movements of the hand.
This setting is only available in Manual capturing mode.
Preview
You can choose to preview photos or videos just after you shoot them.
Unlimited
The preview of the photo or video appears after you shoot it.
5 seconds
The preview of the photo or video apears for 5 seconds after you shoot it.
3 seconds
The preview of the photo or video appears for 3 seconds after you shoot it.
Edit
The photo or video opens for editing after you shoot it.
Off
The photo or video is saved after you shoot it, and no preview appears.
Face registrationYou can register faces with the Camera application so that the viewfinder automatically focuses on these faces when they appear in the viewfinder.
Flash
Use the flash to take photos when lighting conditions are poor or when there is a backlight. The following options are available when you tap the flash icon in the camera screen:
Auto
The camera automatically determines if the lighting conditions require the use of a flash.
Fill flash
Use this setting when the background is brighter than the subject. This removes unwanted dark shadows.
Red-eye reduction
Reduces the red colour of eyes when taking a photo.
Off
The flash is turned off. Sometimes photo quality can be better without the flash, even if lighting conditions are poor. Taking a good photo without using the flash requires a steady hand. Use the self-timer to avoid blurred photos.
Torch
A torch or camera light is turned on when you take photos.
Scene selection
Use the Scene selection feature to quickly set up the camera for common situations using pre-programmed scenes. The camera determines a number of settings for you to fit the selected scene, ensuring the best possible photo.
Off
The Scene selection feature is off and you can take photos manually.
Soft Skin
Take photos of faces using an enhanced beauty effect.
Soft snap
Use for shooting photos against a soft background.
Anti motion blur
Use for minimising camera shake when shooting a slightly dark scene.
Landscape
Use for landscape photos. The camera focuses on distant objects.
Backlight correction HDR
Use to improve details in high contrast shots. The built-in backlight correction analyses the image and automatically adjusts it to give you a perfectly lit shot.
Night portrait
Use for portrait photos taken at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
Night scene
Use when taking photos at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
Hand-held twilight
Use for taking hand-held low-light photos with reduced noise and blur.
High sensitivity
Use for taking photos without a flash under low light conditions. Reduces blur.
Gourmet
Use for shooting food arrangements in bright colour.
Pet
Use for taking photos of your pet. Reduces blur and red eyes.
Beach
Use for taking photos of seaside or lakeside scenes.
Snow
Use in bright environments to avoid overexposed photos.
Party
Use for indoor photos in poorly lit environments. This scene picks up indoor background lighting or candlelight. Due to long exposure time, the camera must be held still or placed on a stable surface.
Sports
Use for photos of fast-moving objects. Short exposure time minimises motion blurring.
Document
Use for photos of text or drawings. Gives the photo increased, sharper contrast.
Fireworks
Use for taking photos of fireworks in all their splendour.
This setting is only available in Manual capturing mode.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing.

    My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing. please help

    Hello Sarahd200037,
    Thanks for using Apple Support Communities.
    To troubleshoot the microphone on your iPhone please follow the steps in the article linked to below.
    iPhone: Microphone issues
    Take care,
    Alex H.

  • Video not working in Nokia Camera (Lumia 920, Lumi...

    Hi,
    I've just noticed that the video function of Nokia Camera is not working.
    The camera function *is* working.
    Video *does* work using the standard Camera app. (so the camera _can_ take video!)
    I've reset the camera, restarted a few times, still no joy.
    this is for v4.5.1.7 on a Lumia 920 running Lumia Black software.
    Ian

    Try uninstalling and reinstalling the Nokia camera app.

  • I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

    Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

    To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
    How to back up your data and set up as a new device
    If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
    iPhone - Contact Support - Apple Support

  • Ipad 3 camera shuttle is not working, ipad 3 camera shuttle is not working

    My ipad 3 camera is not working; the shuttle doesn't open - any ideas on how to resolve this problem?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Z3 compact radio not working

    The radio on my phone is not working and i dont know what is going on. The radio stations show when the earphones are connected, but no sound comes out in the earphone or speaker. My z3 compact (D5833) is running on lollipop.
    Solved!
    Go to Solution.

    @dubby
    It might be a OK google issue
    Settings > language & input > Google voice typing > OK Google detection > try turning off from any screen and personal results. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Camera connection not working with my camera

    Camera connect not working with my Sony boggie camera

    The Bloggie will not work because it draws too much power from the USB port on the iPad.  The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory.  Works fine with my 3D Bloggie.

  • Tun miniport adapters are not working and the camera card reader is not working on a T61P.

    The Microsoft tun miniport adapters #4,2, and 3 are not working.  They display code 10 error message. Also the USB  mass storage device (camera card reader) is not working. 
    I have tried to uninstall and update the drivers to no avail.  I have used ThinkVantage Tool Box.  It only lets me know that they are not working.  It does say to reinstall them.  I have tried.  All effort has failed.
    All was find until I ran several updates via ThinkVantage.
    All suggestions would be appreciated.
    Thank you,
    Tom

    You will not lose data if you back up
    Worth doing the basic troubleshooting
    Reset
    Restore  best as new since you have issues ,then you will know if it has started to function correctly ,if not .....
    Visit Apple store since if it isn't software probably iPhone is on it's way out

  • Large number of apps not working on manual proxy

    Recently my school installed a proxy which means when we connect to the wifi using iphone, ipod, pc etc. we must connect through the proxy. To connect to the proxy on my ipod touch it requires me to use the manual settings and turn authentication on and the issue is that the majority of my apps which require internet like for example clash of clans does not work where some apps such as the met office weather app and instagram work fine, in addition safari and the app store appear to be working fine. I have done a large search all over the internet and it appears this has been an issue since 2008 which is ridiculous
    So please has anyone got an ideas of how to fix this?
    Just to note no-ones iphone 4s or iphone 5, neither does anyones ipod touch 1gen, 2gen, 3gen or the most recent ipod touch, neither does anyones ipad or ipad mini so this is not just me and before anyone says it is not a problem with the school proxy it IS a problem on the ios or something along those lines

    I also first thought that but there are website such as bbc iplayer and facebook which are not blocked but the apps do not work, and it is basically all the third party apps that do not work, apple apps seem to work fine however. And as I said I am not the only one who as posted on here with pretty much the same issue and some of them are not through proxies which have blockings. In addition people with accounts at my school which have no site restrictions, their apps still don't work either

  • Automatic update of RemoteApp and Desktop Connections does not work (while manual updates with "update now" is working)

    Hello,
    on several Windows 7 Clients the update/refresh of the RemoteApp and Desktop Connections stopped not working automatically. There is a Update failed error. When we do an "Update Now" manually, it gets synchronized without problems.
    I am asking me if there is an issue with a stored Password as we Need to Change the Passwords regularily. The error is occuring for Connections to all RDS Servers (we have severals).
    Does Windows store the user Password in the Task Scheduler? If yes, does the schedule Task Password Change automatically after the Domain Password Change?
    Or what else could be the issue? The RDS Server and the certificate (Name the same as the URL) seems to be fine as not all Clients have this issue.
    Thank you for your help

    Hi,
    Thank you for posting in Windows Server Forum.
    By default it will automatically update the RemoteApp and Desktop Connections but if in any particular case it’s not happening then for a try you can restart the server and check the result again.  In addition you can try running below command and check
    the result. 
    Start-Process rundll32 -ArgumentList "tsworkspace,TaskUpdateWorkspaces2
    More information:
    Powershell to update "RemoteApp and Desktop Connections"
    If a task is registered using the Administrators group for the security context of the task, then you must also make sure the Run with highest privileges check box is checked if you want to run the task. Please check “Task
    Security Context” for more details.
    Hope it helps!
    Thanks,
    Dharmesh

  • The back camera is not working but front camera is

    hi
    my back camera is not working anywhere, not on the camera app nor on any other application.
    the front camera is working still
    since that time, the light is not working neither.
    my iOs is already updated
    what should i do?
    THank you

    Hi Moudira.me,
    I understand that you are experiencing an issue with your back camera and LED light on your iPhone. Here is an article for you that will help you address this issue:
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT203040
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Rebel x3i (600D) autofocus not working in Creative Zone mode. Works okay in the Basic modes.

    I bought a Canon refurbished x3i from Canon last Summer after my Ritz Camera extended warranty became useless and my xTi (400D) died. The camera has been excellent until very recently.
    About a week or so ago, the autofocus stopped working. I think it started when I decided to try the Canon refurbished 50mm 1.8 lens I bought off the internet. It didn't work for that lens and hasn't worked in Creative Zone since.
    There is an asterisk (*) in the lower left corner of the viewfinder. This is an AE progress indicator. There are no active Focus Points. Sometimes, all nine of them will light up, but it doesn't mean anything.
    Based on responses to other forum posts, I have tried different EOS lenses (I have two Rebel film cameras) and I have tried LiveView. Same problem. I can live with the situation, but, obviously, I would rather not.
    Naturally, Manual Focus works fine.
    The pins on the camera look and feel fine - no bends or broken tips. The pins on the lenses look fine, too, even the 50mm.
    (I haven't contacted Canon, yet, because after-the-sale guarantees are usually 30-90 days, but I will contact them tomorrow)
    Solved!
    Go to Solution.

    I don't think you are getting the camera cleared and reset.  You MUST clear all settings.  It sounds like you have focus lock set to ON.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • Tab key does not work properly in Assessment mode

    I am predominatly using Adobe Captivate for software simulations and assessment purposes. 
    I've seen similar items posted on the forums and noted this appears to be a common problem with a solution, to edit the HTM file with the code  so.addParam("seamlessTabbing", "false"); see post http://forums.adobe.com/message/5283597#5283597.
    I tried this with a file that was published without the need for SCORM compliance and it worked fine.  Once the requirement was introduced for SCORM compliance (and to publish as a Zip file), this does not work as the code is different in the HTM file.
    My file has the following code:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
    <!-- Copyright [2012] Adobe Systems Incorporated.  All rights reserved -->
    <html lang="en">
    <head>
      <link rel="stylesheet" type="text/css" href="captivate.css" />
      <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
      <title>Enter Billable Time - Assessment</title>
      <!-- Include external JS files -->
      <script language="JavaScript1.2" src="standard.js"    ></script>
      <script language="JavaScript1.2" src="scormdriver.js"  ></script>
      <script language="JavaScript1.2" src="SCORM_utilities.js"  ></script>
      <script language="JavaScript1.2" src="Utilities.js"   ></script>
      <script language="JavaScript1.2">
       //Register event handlers
       window.onkeypress    = CheckForDebugCommand;
       window.onload    = OnloadActivities;
       window.onbeforeunload  = Finish;
       window.onunload   = Finish;
       document.onkeypress   = CheckForDebugCommand;
      </script>
    </head>
    <body>
       <div id = "CaptivateContent">
        <noscript>
         This course requires JavaScript to be enabled in your browser.
         Please enable JavaScript, then relaunch the course.
        </noscript>
       </div>
    </body>
    </html>
    How could I edit this to disable the "seamless tabbing" referred to in the original article to make the TAB key work as intended.
    Thank you.

    This is from my e-book:
    http://www.infosemantics.com.au/troubleshoot-adobe-captivate
    Notice that the procedure for Seamless Tabbing in Cp6 with SCORM is different to that for normal non-LMS courses.
    Implementing Seamless Tabbing in Cp6
    All Captivate versions up to and including Cp6 had Seamless Tabbing active by default and set in the HTM template code. But you can still turn it off by manually inserting some code into the published HTM file as follows:
    Navigate to your published Captivate content and open the HTM file in Notepad.
    Locate the line of code in the HTM file that starts with:
    var so = new SWFObject(
    Add the following code on the next line:
    so.addParam("seamlessTabbing", "false");
    Save changes to the file and test by running your project again in the browser.  You should now be able to use the TAB key without leaving your published content.
    Adding seamless tabbing to Cp6 SCORM support files
    Seamless tabbing in Cp6 SCORM projects is a little more complex because the templates are quite different to those used for normal content.  To control seamless tabbing in SCORM content you need to make the changes to the SCORM_utilities.js file in the Captivate install directory.
    Depending on whether you’re on 32bit or 64bit, you should be able to find it at one of these locations:
    32bit:
    C:\Program Files (x86)\Adobe\Adobe Captivate 6 (32 Bit)\Templates\Publish\SCORM\Default\js
    64bit:
    C:\Program Files\Adobe\Adobe Captivate 6\Templates\Publish\SCORM\Default\js
    Open the SCORM_utilities.js file in Notepad or another suitable plain text editor. Scroll down to the end of the code until you find the following lines:
    so.addParam("quality", "high");
    so.addParam("wmode", CONFIG.WMODE);
    so.addParam("bgcolor", CONFIG.BGCOLOR);
    so.addParam("menu", "false");
    so.setAttribute("name", CONFIG.SWFOBJ_NAME);
    so.setAttribute("redirectUrl", CONFIG.REDIRECT_URL);
    so.addParam("AllowScriptAccess","always");
    so.write(CONFIG.TARGET);
    Add the so.addParam("seamlessTabbing", "false"); code to this group and save the file.
    If you are currently unable to save changes to these template files, my gut feeling would be that it must have something to do with your user permissions. E.g. you are not an Administrator for your own PC. Is that possible?

  • IMAQ OverlayMnl​tiLines vi not work in fill color Mode on CVS1456 VGA

    Hi,
    I try to output colorful polygon on NI CVS 1456 VGA with IMAQ OverlayMultiLine vi Fill mode and it just output the frame of the polygon but not fill the color to the monitor. Try the OvelayRectanglewith Fill color, the vi works. Is there anyone know why? How to make the OverlayMultiLine vi's Fill mode work? Thanks!
    John

    Good afternoon John,
    This information has been passed onto our R&D department.  Earlier in the week, I tested out this problem and came across the exact same results.  The OverlayMultiLine.VI works correclty in the "Fill" mode when run on the host computer.   However, the "Fill" mode does not work properly when deployed to the CVS. 
    I apologize for this inconvenience!
    Respectfully,
    Jeffrey P.
    LabVIEW Product Management
    National Instruments

  • Image Buttons Not Working in IE10 Normal Mode

    Hi Team,
    Greetings of the Day!! We are supporting a project which included the technologies "ADF , BPEL , AIA , SOA".
    We have a page developed in ADF and the page contains TABS.
    We have a LOV which have 'Add Product' as one of the value.
    When we click try to Configure the Line for a particular Product it is redirecting dmz-server where we have 'YES/NO' Buttons but this buttons are not working in IE-10 Normal mode and in other browsers buttons are working fine.
    Could some one please help me on this.
    Thanks

    For that matter, the "return to menu" which is set to a Main button type, isn't working either.  that is one of the three.  After i had removed the damaged button and copied it from another it worked.  Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons.  I just can't figure it out.  I have shut the app down and restarted and nothing seems to be working

Maybe you are looking for

  • I keep getting this error message when trying to access thew internet:Unable to connect

    I have been using Firefox for years. Then all of a sudden it just quit working. I get Unable to connect. See below. Firefox can't establish a connection to the server at search.yahoo.com. or any other website. Help!

  • Ever since I installed the Safari 5.1.7 update my trackpad malfunctions.

    Ever since I installed the Safari 5.1.7 update, my trackpad does not functing well. I know its not a faulty trackpad because it also malfunctions when I install a different mouse. The malfunction happens when I launch the Safari application. How do I

  • Two vs: Four Memory lane useage.

    With a 32bit system we know that up to 4gb is max and the system will only recognise 3+. Is it better to install 2x2gb sticks using only two lanes or is it more effecient to use ALL four lanes with 1gb in each, using the processors two memory process

  • W_gl_balance_f has 2 balance rows, causing doubling in dashboard rpts

    Hi all, Thanks for taking the time to review my post. Environment Oracle BI Applications 7.9.6 Financial Analytics Oracle E-Business Suite 12 Query select ledger_id, gl.code_combination_id, period_name, period_num, segment3 account, segment1, segment

  • Quick css name question...

    I created a simple file in dw main.css. It worked fine in dw and firefox testing - but failed in safari... many times I resent to web and cleared cache etc... but no joy then I changed the name to something else and all worked what went wrong? Is mai