Z3 not capturing close up photos properly....need proper setting

I'm very disappointed with Z3.
It isnt able to focus on and capture closeup objects clearly. I tried **bleep** lot of setting but nothing seems to work.
In fact my Lumia 730 phones captures any closeup photo with a breezee and that too on automatic settings.
Z3 does captures close object but not much close enogh which I want. For that I have to always use my Lumia phone to capture objects as close to near 5cm or less.
In one of my old threads @ Ashroft98 suggested me a setting:
To take close up,again you could use "Superior Auto" (which works the best,for me) or second,change to Manual Mode and change to these settings "Exposure to f2.0 and change ISO to 50" credits to @SergioPL for sharing these custom settings.
I dint got what he meant by Exposure to f2.0. Which value is to be set to 2.0?
1] Also what is Metering setting and why should we use it?
2] Does Metering and Focus mode interfere with each other?
3] And when should we turn on HDR & Image Stabiliser settings? Are they helpful for a Close-up capture?
-------- If my Post or Answer helped you out, Please KUDOS me

Hello RohitTech I am going to make this as short as possible but you are asking a lot of questions...
0) The Z3 / Z3C is tricky to take Macro photography... It also happens to me and I think it is a weakness of those devices maybe because of the wide angle lens
What I do to take "better" macro pictures (either on superior auto or manual mode) is to get close to the subject BUT not too close, in fact I keep the camera at over 10 cm apart, and press the shutter button until you see the Focusing Square BLUE, this will let you know that the object is in focus. AND THEN I will zoom in until the first step, which lets you know that you are still taking an 8MP picture, using lossless zoom (basically cropping the full 20MP into an 8MP at the center). In the end the pictures look way better. But to be honest this phone is no the best suited for macro.
Here is a pic I took using the method I just described and to the right is another image without zoom, as close as I could get without losing focus. Both are cropped to similar magnification and both are 8MP pictures taken in Superior Auto Mode. (TO SEE BETTER, SAVE THE PICTURE AND OPEN FULL SIZE)
1) Metering is the area inside the frame, used to detect how much light it lets into the sensor. For instance, if you set Metering to "Spot" it will adjust the whole image according to the light conditions in a small spot (no bigger than the focusing square)... this way if you are pointing at a light bulb the whole picture will turn very dark and you will be able to take a pic of said light bulb. If you set metering to "Center" (or Face, both recommended for regular use) the lightness of the image will be calibrated to an area in the center (or at the face of a subject) bigger than spot, but smaller than "Multi".
2) Metering and Focus are different settings and normally do not interfere with each other. Metering is the calibration of light across the image, and Focus is the concentration point of the image, where the subject/s will look sharper.
3) HDR should be turned on for pictures with very different contrast in scene, for example taking a picture of somebody with backlight (HDR will help reducing the light at the background and compensate the subject in the front)... please take a look at this suggestions I made.
Image Stabiliser is very helpful when recoding video, taking low light pictures and movement in general (when the movement is present at the camera)... For taking pictures of moving SUBJECTS you should switch to Manual Mode and select Sports scene.
I would NOT recommend HDR for macro (close-up) captures because the contrast is dimmer and you will lose details.
My advice is to actually try every setting and mode and see how it changes in your pictures, dont be afraid to tweak, it is all reversible... I self taught everything I know about photography ( I am not a pro) and I started learning with my old Xperia Acro S. My new Z3 Compact is actually very different in many areas.

Similar Messages

  • TS3989 Photostream not capturing all my photos

    I have had an issue where sometimes a picture I take with my iPhone does not get uploaded to my photo stream. For example, I was at the zoo and took about 40 pictures. 2 of them never went to Photostream even though it is still on my phone.
    Yesterday, I snapped another picture somewhere and it is still not on my photo stream (even though it remains on the phone).
    My question is, is there something that causes this bug?
    Also, is there any way to force a photo from the camera roll to Photostream so I can get the missing three photos in there?
    Thanks!

    Hi Winston,
    Thanks for your answer. In case this works, this will help me only with the photos I've already taken, but I'll have to repeat this procedure everytime a single picture doesn't made it from the camera roll to the photo stream folder, which I don't think is the right way for the iCloud to work.
    I was thinking maybe an OS version upgrade, but I've read the improves for the 5.1.0 and the 5.1.1 versions, and none of them mention the fix of this bug.
    Thanks again for your help.

  • Newly installed Cap 8 not capturing mouse clicks

    Newly installed Captivate 8 is not capturing my mouse clicks.  Captivate is set to Training & I have my regular settings selected.  I have also worked with the application I am trying to capture before and did not experience any issues.  Thoughts?

    Hi there,
    Please tell which Operating system is it?
    If it is Windows, then have you installed the 32 bit version or 64 bit of Captivate?
    Again, if it is Windows please try to run it as admin, by right clicking the Captivate launch icon.
    Thanks.

  • SP2-0750: You may need to set ORACLE_HOME with instant client and sqlplus

    On an hp-ux 32 ,,,
    - i downloaded instant client from here http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/hpsoft.html
    - installed and set my shlib_path to directory where I extracted it.
    - running sqlplus comes up with this ...
    Error 6 initializing SQL*Plus
    Message file sp1<lang>.msb not found
    SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory.
    - what the heck am i missing here?
    Thank you.

    you can see from the 'tusc' ouput below that it is clearly trying to locate msb files. These files are not packaged with the instant client. So how it this supposed to ever work? These files are simply missing from the distribution.
    close(3) ............................................................................................................. = 0
    stat("/home/oracle/oraclnt/clnt/libclntsh.sl.10.1", 0x7f7e3070) ...................................................... = 0
    open("/home/oracle/oraclnt/clnt/libclntsh.sl.10.1", O_RDONLY, 02) .................................................... = 3
    fstat(3, 0x7f7e3138) ................................................................................................. = 0
    read(3, "0210010e0512@ \0C f7h 13\0\0\0\0".., 128) ................................................................... = 128
    lseek(3, 128, SEEK_SET) .............................................................................................. = 128
    read(3, "10\0\004\0\0\0( 01L W a4\0\010\0".., 48) .................................................................... = 48
    read(3, "80\0\0\v\0\0\004\0\0\0\0", 12) .............................................................................. = 12
    lseek(3, 4059136, SEEK_SET) .......................................................................................... = 4059136
    read(3, "058cy 10\0\0, \ \004: 8 \0\0\0\n".., 112) ................................................................... = 112
    mmap(NULL, 21782528, PROT_READ|PROT_EXEC, MAP_SHARED|MAP_SHLIB, 3, 0x3df000) ......................................... ERR#12 ENOMEM
    close(3) ............................................................................................................. = 0
    munmap(0xcc000000, 70111232) ......................................................................................... = 0
    munmap(0x7f684000, 4096) ............................................................................................. = 0
    open("./nls/data/lx1boot.nlb", O_RDONLY|O_LARGEFILE, 0) .............................................................. ERR#2 ENOENT
    open("./sqlplus/mesg/sp1us.msb", O_RDONLY|O_LARGEFILE, 0121430) ...................................................... ERR#20 ENOTDIR
    open("./sqlplus/mesg/sp1us.msb", O_RDONLY|O_LARGEFILE, 0121430) ...................................................... ERR#20 ENOTDIR
    Error 6 write(2, "E r r o r 6 ", 8) ...................................................................................... = 8
    iwrite(2, "i ", 1) .................................................................................................... = 1
    nitializwrite(2, "n i t i a l i z ", 8) ...................................................................................... = 8

  • SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory

    Hi all,
    In windiws 2008 server i have installed 11g wtih 11g Client for Pro*c . so there is two Oracle_Home resides. In the same machine i have installed 11g Forms and reports with weblogic server.
    Now i am not able to connect with the Database in SQL Prompt.more over if i issue SQLPLUS i am getting this below error
    "+Error 6 initializing SQL*Plus+"
    "*Message file sp1<lang>.msb not found*"
    "*SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory*"
    Here my Question and doubt is how i have to solve this issue.i want to use this 11g Database and 11g Forms and reports in single server. how to do this ?
    Kindly share your Advice.
    Regards
    Hamid

    Hameed wrote:
    "+Error 6 initializing SQL*Plus+"
    "*Message file sp1<lang>.msb not found*"
    "*SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory*"
    Here my Question and doubt is how i have to solve this issueIt is clearly said - set ORACLE_HOME prior to runing sqlplus.

  • SP2-0750: You may need to set ORACLE_HOME

    Hi,
    I have set the following variables, but not able to execute sqlplus .
    export ORACLE_HOME=/home/oracle/product/10.2.0
    export ORACLE_BASE=/home/oracle
    export PATH=/home/oracle:/home/oracle/oracle/product/10.2.0/db_12/bin
    I get this, while runnning sqlplus.
    [oracle@localhost bin]$ sqlplus /nolog
    Error 6 initializing SQL*Plus
    Message file sp1<lang>.msb not found
    SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
    hare krishna

    I would say (according to PATH) your ORACLE_HOME is
    /home/oracle/oracle/product/10.2.0/db_12 (not /home/oracle/oracle/product/10.2.0).
    Werner

  • HT1695 IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

    IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

    I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
    However to my disappointment,  landed back at the same status which says
    We're sorry, we are unable to continue with your activation at this time.
    Please try again later, or contact customer care
    I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
    The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
    Guys ... Need the data desperately ... Can anybody please help???

  • When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto."  Whether I hit Quit or Upgrade the problem is not fixed.  Any suggestions?  Yes, I have tried Command Option iPhoto..no luck.

    When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto."  Whether I hit Quit or Upgrade the problem is not fixed.  Any suggestions?  Yes, I have tried Command Option iPhoto..no luck.  I think I may have hit Upgrade the first time.  I really need this to be fixed ASAP.  Thanks for your help.

    Assuming iPhoto 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Lightroom 5 will not sort scanned photo properly

    Lightroom 5.2, Windows 7 Home Premium 64 bit.
    I have some scanned photos from a trip to England in 1996. I have assigned to each photo the date it was taken. Lightroom clearly displays the date taken. But two photos will not sort properly by date, as you can see in the screen capture; the highlighted photo was taken August 31, 1996, and sorts between photos taken Sept 2, 1996 and Sept 3, 1996.
    Can anyone recommend a fix?

    I think it's the act of reading the metadata from the file that usually corrects inconsistencies in the catalog.
    In this case, it smells like it has to do with the LR's buggy handling of files that don't have capture time in their metadata:
    http://feedback.photoshop.com/photoshop_family/topics/inconsistent_dates_for_files_missing _date_time_metadata

  • My ipod touch is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed

    My ipod touch (model A1213) is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed.

    2.2.1 is not the latest available for any ipod touch.
    Is yours the original ipod touch?
    If so then:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • Need help - my pics in photo stream on iphone do not all dowload to photo stream folder on my pc

    have photo stream pics on my iphone, when my iphone is connect to my PC, some of the photos do not download onto my photo stream folder on my PC - need help with this

    Welcome to the Apple Community.
        •    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
        •    Photostream only syncs when the camera app is closed, ensure it is closed.
        •    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • I get a message that my photo library needs to be upgraded and my photo library will not be readable by previous versions of iphoto after the upgrade.  I don't dare do anything.  Please help

    I keep getting a message when I try to open iphoto that says that my photo library needs to be upgraded and my library will not be readable by previous versions of iphoto after the upgrade.  What do I do??

    Depends - you first off need to suypply us with information since we only know what you tell us
    Like what version of iPhoto are you using? Have you recently installed any iPhoto (or iLife) updates or upgrades? Do you plan to use this iPhoto library with two or more different versions of iPhoto (no possible so stop now if you do)? Where is your iPhoto library?
    Anything else that you can tell us that might let us give you a good answer to your question
    LN

  • When I am trying to package my artwork in Adobe Illustrator CC, it is not capturing my images and fonts. How do I make sure my linked photos and fonts are captured?

    When I am trying to package my artwork in Adobe Illustrator CC, it is not capturing my images and fonts. How do I make sure my linked photos and fonts are captured?

    Not all fonts can be packaged depending on their licensing. Some fonts are set to not allow packaging. For those you would have to manually locate them on your computer and add them to the folder where the packaging occurred.
    For the images have you checked the "copy links" option?

  • I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.  Please help!

    I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.   I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto.  I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken.  I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported.  I greatly appreciate some assistance!

    All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
    The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
    Regards
    TD

  • How to determine the source to where my saved photo (not taken by my iPhone camera) on whether what application or website did i got that photo? need to go to the source again, please help

    how to determine the source to where my saved photo (not taken by my iPhone camera) on whether what application or website did i got that photo? need to go to the source again, please help

    There is no way to trace the source of a saved photo.
    You might have some luck if you search through the Safari web site history available via the Bookmark icon.

Maybe you are looking for

  • NLABView 7.1 and 8.5 not working correctly without Admin Rights

    I am working with a product call PREMISE which uses both the NLABView 7.1 and 8.5 software/dll/activeX components. The issue that I am having is caused by the user account in which we are running the software is not and ADMINISTRATOR on the computer.

  • View Player Window opens too large on Mac screen

    I am using iTunes 6.0.4 and when I open up a podcast video in the "View Player" (lower left hand corner of iTunes) it opens up so large I cannot view it properly. How do I shrink the size of this "view" on my Mac. When I open the same "View Player" i

  • Using XML as plain text in TextFilter

    I have an application with an XML tag: <mx:XML id="textXML1"> <root><c1>goodbye</c1></root> </mx:XML> I then have a string variable which I set equal to that XML: var t:String = textXML1; I then set up a TextFlow by the following line of code: textFl

  • Report containing POs with SES details

    Hi Gurus, Is there any report which gives Service entry sheet details against Pruchasing documents. Please suggest Regards, Subbu

  • SNC using JCO API

    I am trying to connect to a SAP Server (having SNC enabled) using JCO API. I am using a simple java program. I mentioned the following parameters jco.client.snc_mode=1 jco.client.snc_partnername=p:CN=IDS, OU=IT, O=CSW, C=DE jco.client.snc_qop=1 jco.c