Z3 / Z3 DUAL have same screen ? (for changing after break)

Hello,
my Z3 DUAL screen has been broken after falling down and i have made it change by a repairer...but now the screen is unsticking near from the dual sim location...
so i wonder if the screen of Z3 and Z3 dual are different and if repairer replace the Z3 DUAL screen by a Z3 (normal) screen ?
Could you confirm me that screen are same or different between Z3 and Z3 DUAL ?
thanks a lot
Henry-Brice

It should be the same screen
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • SECATT not saving the screen for change of address in CAA2

    Dear Secatt Experts
    When recording the transaction CAA2 using TCD(Record) in SECATT, the
    screen for change of address  in the main screen of CAA2 is not getting
    saved. Therefore I am unable to run the script for change of address
    The address can be changed (Fix any address other than standard address)
    by using F4 function in the address field in the main screen.
    Please help
    Best Regards
    Venkat

    Hi Venkat,
    It should work fine with SAPGUI recording. So please try this.
    Hope it helps.
    Regards,
    Ananth.

  • I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

    As the title says.
    I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
    I don't want to restart it because im scared that something might go wrong.
    operating lion

    LimitLess- wrote:
    Hi,
    I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
    Thanks
    I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
    That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

  • Screen resolution changes after opening PDF in preview and is enlarged.

    Screen resolution changes after opening PDF in Preview and is enlarged.

    Do a backup.
    Quit Preview.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following. You may not find them all.
    Containers/com.apple.Preview
    Preferences/com.apple.Preview.LSSharedFileList.plist
    Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
    Saved Application State/com.apple.Preview.savedState
    Credit Linc Davis  for this solution.

  • HT1918 i have just made my apple id.i have made this for itunes.after making my account i have problen with the review payment information as i do not use any credit cards and there is no option like NONE in review payment information. what should i do no

    i have just made my apple id. i have made this for itunes. after making my account i have problem with the review payment information as i do not use any credit cards and there is no option like NONE in review payment information. what should i do now? to proceed further? plz help me!

    How did you create the account ? If you followed the instructions on this page when creating it then you should have got the 'none' option : http://support.apple.com/kb/HT2534
    e.g. on a computer's iTunes, if currently signed into an account then you logged out of it, and you then found a free app in the store and clicked on its free 'price' :
    And then clicked on 'create Apple id' on the popup :
    When I tried that process to create an account a few days ago I got the 'none' option on the payment details screen.
    If you didn't use that process then you will need to create a new account using it (the instructions won't work with an existing account).

  • How to map secondry elements with main if have same ids for both?

    I need to map secondry elements with its matching primary elements if they both have same id.
    How can this be achieved in xslt.
    If ids are not matching then not a single element of secondry sholud be shown.
    If ids matching, then other fields of secondry elements, should be mapped to similar fields of primary elements.
    Eg: Its like some program running and in between some add on programs started (may be trailor or advertisement).
    the add on program is not always shown (optional), and whenever shown it has its own data information etc etc.
    Please provide me some input, how to map and proceed.
    Not sure what this code is really doing.
    <xsl:template match="SECONDARY_EVENT_LIST">
              <xsl:variable name="secondaryElements" select="ancestor::SCHEDULE/SECONDARY_ELEMENT_LIST"/>
              <xsl:for-each select="SCHEDULE_ELEMENT_ID">
                   <xsl:variable name="id" select="."/>
                   <xsl:apply-templates select="$secondaryElements/SCHEDULE_ELEMENT[(@ID=$id)]"/>
              </xsl:for-each>
         </xsl:template>
    Is this having any relation with what my requirement is all about?

    Hi,
    You can use XPATH command to get the exact tag.
    You can access each tag with it location like “/Report_Name/Group_Tag/Element_ID”.
    I think this will remove the ambiguity of Tags with same ID.

  • Get input and display output on same screen for report

    Hi frnds,
    two params
    that is mat.no,desc.
    enter the mat.no and also display the description of that mat.no in same input screen for the report.
    How can i archieve .
    Thanks in advance.

    Hi,
    It is not possible in Dialog Programming too. But there is an alternative. You can make the material number field as drop down. Assign a function code to that. Now in PAI you can code accordingly to display the description.
    In TOP.
    TABLES: mara, makt.
    DATA  gv_maktx TYPE makt-maktx.
    In PAI.
    CASE sy-ucomm.
    WHEN 'F_MATNO'        "function code assigned to the material number drop down field
         SELECT SINGLE maktx
          FROM makt
          INTO gv_maktx
          WHERE matnr = mara-matnr. " mara-matnr is the dictionary reference to the material number drop down field in the screen.
          makt-maktx = gv_maktx.    " makt-maktx is the dictionary reference to the material description field in the screen.
    ENDCASE.
    Thanks,
    Sri.

  • What to do when the client asks for changes after final audio mix?

    Sometimes a client will want changes after the final audio mix has been done. That is, I've already sent the project from Premiere Pro to Audition, done a master mix, and sent it back to Premiere Pro. If I'm then asked to make changes to the video, I don't know of any way to preserve the work I've already done in Audition and just update it with changes. I find myself making the changes in Premiere Pro and re-sending the whole project back to Audition for a completely new mix. This isn't very time efficient, and I'm wondering if anyone knows if I can update a project in Audition with changes in Premiere Pro without having to start again?
    Obviously it's best to have picture lock before doing the final mix, but things happen and people change their minds.
    I'm working in CS6.
    Thanks
    Carolyn

    "The only question I have is whether it is possible to save any of the work
    I've done in Audition when I am resending back from Premiere."
    A: Absolutely
    "When I add more elements to my sequence and unmute the original track and export the
    new sequence to Audition, I am basically starting on a fresh mix, right?"
    A: Yes
    "It's a new sequence?"
    No. It's the same sequence. But without the tracks (stems) you previously had in it.
    "The only option seems to be to overwrite. My question is whether I can save any of the work I've already done in Audition- there is often a couple of hours of work in already.
    A: Before you do anything, save whatever work you've done in Audtion as a session.

  • How to get the same email for Eprint after resetting the printer

    Hi.
    I Have reset my HP Photosmart 7520 printer, but now i can't the the same email adress for Eprint as before the reset, when i try to register the same email adress, i got the message "adress used"..
    So how do i get the "old" email adress on the printer again?
    Lars

    Hi Lars, Please check this link: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Can-t-use-my-old-hp-... this thread implies the same answer for your question.

  • Still have no access for Assets after upgrading to Single App ...

    CC Windows, OS: Windows 7 x64 Build: 6.b7601
    Signed up for Photography program like a month ago. While I was trying to access Assets for use in Photoshop I was warned by a dialog about limited access, and I have to subscribe for CC Complete or Single App membership. Today, I have decided to go for Single App. Membership w/ Acrobat and subscribed for this programme but still there is no access ... Can you please fix this ...

    Are you sure, you are working for Adobe ? ...
    As I said before ... I have just upgraded my subscription from Photography to Single App. for ONLY assets access (Not acrobat subscription ... Single app subscription) ... Whatever; here is the description for assets feature from Adobe website -- Creative Cloud Help | Creative Cloud Market
    "To download and use Creative Cloud Market content, upgrade to either Creative Cloud Single App or Complete plans."
    and that was why I upgraded my subscription to Single App. In the end Single App is Single App; Acrobat or Illustrator. Whatever ... I am just trying to tell your subscription system fails, or at least single-app acrobat users are not being taken into consideration as single-app subscribers. I know it is reasonable purchasing Illustrator or InDesign for assets access, but there is nothing mentioned about having Acrobat as single app would not allow to use assets feature.
    So this is what happens;
    * I bought PS and Lightroom ( Photography )
    * I tried to download assets, but CC desktop app told me to upgrade my subscription to Single App or Full Membership to use them.
    * I followed the link to upgrade my plan.
    * I upgraded my plan to Single App. (Acrobat) ... Or whatever, just get it ... title of the software should not be the case, at least according to Adobe.
    * Returned back to CC desktop App. to reach assets.
    * Still no access ...
    * Still same warning to upgrade my plan which should be upgraded in step 4 !
    * 3 Weeks ...
    * Still same ...

  • Is it possible to keep a movieclips filter/tint changes after breaking apart?

    I already know the answer is no, but I think that could be something the developers can work on for a future version. I'm currently working on combining a bunch of movieclips with variating color schemes that I'd like to condense into a unified pallete. Breaking apart a movieclip reverts the graphics to the original colors but it would be super-helpful if flash repasted the current color settings onto the graphics once its broken apart. Maybe implementing a few of illustrators color palette tools would be great too. If this isn't the proper place, then I apologize but I wanted to pass the info along as an artist who is currently using flash as his primary art development tool right now.

    I'm here, Ned. And Yes, the wishlist is the best place to post any enhancement request for further review.
    This is a wonderful request and will need careful planning due to several factors. The first issue I see is filter being specific to movieclip only so it can not be applied to a graphic symbol. The second is that if we are to reapply the filter and other effects to the symbol after break apart, what happen if the inner symbol already have this effect at a different value. Lots of things to consider and think about in the design as well as engineering of this request.
    Quynh
    Flash Pro, QE

  • HT201210 how long is this restore supposed to take? my phone has been stuck on the same screen for 15 minutes

    i plugged up my phone and it said i needed to restore it to factory settings so i did and now its stuck on a screen that shows i need to plug my phone up to itunes and restore it but my phone is already connected to itunes. ive tried resetting my phone and it just goes back to that screen and i have also tried to unplug and plug my phone back but it still keeps getting stuck at the 'preparing iphone for restore' bar thing at the top. how long is this process supposed to take? i was only trying to put one song on my phone and i had done it yesturday with no problem and the day before that. please help

    I had this issue also. My last restore took 2 hours, despite restores under 1.x taking something like 20 minutes.
    I don't think it's the videos/podcasts, as those don't show up until synchronizing after the restore anyway.
    I asked this same question a while ago, but no one responded. I'm not sure if its normal.

  • Windows wil not load..it goes to the restart screen for safe/normal mode/tries to start but returns to the same screen for safe /normal mode...Help

    What has happened...when starting in bootcamp, windows does not load. It goes to the restart in safe/safe with networking/normal mode.  When I choose any of these windows screen comes up and the lttle blue balls start to roll.  then screen goes blank as if windows is to start but goes back to the resrat in safe/etcmode.  Help...

    Did you burn the DVD from ISO?
    Did Windows get fully installed & updated? added Apple Boot Camp after?
    If you still don't have 10.6, you won't have Boot Camp 3.x drivers (and later) for Windows 7.
    How large a partition did you create?
    How long if at all was it working normally?
    The last update, install or change made was.....?

  • How to have same screens on iphone as ipad?

    Have ipad, mini, and iphone all have apps in different locations screeens. Would live to have them all the same. .

    Hi the best way is to press them make then shake clear a space at bottom of screen Move them temporary then put them where you want. Cheers Brian

  • Says I am synched to a different iTunes acct but I only have same one for over a year?

    I am trying to backup music from my phone to my iTunes account but it says my iPhone is currently synched to another iTunes account. I got this phone brand new in end of February and only have one apple iTunes account. Have always used same computer. I have over 600 songs on phone and only 8 songs show up in my music library. How do I identify what account my phone is currently synched to cuz when I sign in, it shows my correct id? It isn't making an sense!

    I'll echo what roaminggnome said. Since you wiped your machine, this is a new installation of iTunes and a new library. I'm assuming based on what you're saying that when you "completely restored" your computer, all you did was format the drive, reinstall Windows and all your applications. You did not actually "restore" anything, like your iTunes library. If you had, the music and other media would be in iTunes already and all you would have to do would be re-sync it to the phone (still a new library, but at least it would all be there).
    Hopefully, you did backup your data, including iTunes BEFORE you wiped out the machine. Not doing so is like putting all your cash in a shoebox, dumping lighter fluid on it, tossing in a match, then going and getting another shoebox and complaining because your money isn't in it.
    There are some 3rd party utilities that may be able to help extract the media from your phone. None are sanctioned by Apple. Google is your friend.

Maybe you are looking for