Z30 availabili​ty Orange / O2 Uk

Just a quick question on the availability off the Z30.
My business contract is up for renewal at the end of November. Im wanting to stay with Blackberry and im very interested in the Z30. Im currently with Orange and due to my geography of my work area i need either them or O2 as a provider.
Whenever ive spoken to someone from Orange / O2 when the Z30 will become available, i just keep getting a shrugged shoulder answer, and been advised to speak to yourselves directly for any more information on this ?
Im unable due to work / security to purchase the phone though Carphone Warehouse (CWP) or other similar companies and has to be a direct from a major network provider.
Any help i would very much appreciate.
Cheers.

The BlackBerry forums are not a formal support for BlackBerry most answers you get here will come from volunteers (such as myself).
Even if someone from BlackBerry were to read this posting I think it very unlikely they would tell you as they will have contracts and confidentiality agreements in place with Orange / O2 preventing them from doing so.
You'll just have to keep checking the O2 and Oranges sites.
Perhaps next time you talk to them threaten to leave unless they can guarantee you get one or ask to extend your contract by a month.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Similar Messages

  • Stopping During Update Z30

    hi
    I wanted to update my z30 with an autoloader but in "Writing" part the percentege went up to 6% and then stopped.every time i try the same happen sometimes on 10% and 15%.
    now my phone doesn't work and an orange signal flickering on the top of my device.BackBerry Link has the same problem,too.
    Please Help Me Guys!

    Keep your #Z30 connected to a known working wall outlet charger for 3-4 hours to get the battery back charged fully. Then attempt the autoloader again.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • SIM NOT RECOGNIZED Z30

    I HAVE JUST BROUGHT A Z30. MY NANO SIM ( Orange France provider) IS NOT RECOGNIZED BY THE DEVICE?

    Is this a new SIM?
    Can you try a different SIM from Orange?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

    I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

    I would complete unlocking as is and then
    restore as new once you know the iPhone is unlocked
    Be aware Orange will process the request at their speed
    one of the reasons they usually reside at bottom of User Sat surveys
    will likely take weeks
    This may also help
    http://support.apple.com/kb/HT5014

  • Connecting HDD to Airport Extreme causes orange death light...

    I am in a small office network with mix of pc and mac (7 pc's, 1 iMac, 1 wireless iMac, and 3 wireless macbook pro's). Internet connection comes into building directly to airport. Airport then feeds a couple of systems directly and a Dlink 24port ethernet switch which connects all other hardwired network connections.
    I just purchased a Seagate Freeagent Desk 1.5TB external USB2 drive to be used as a network storage drive (not with time machine just grabbing and dumping files for interoffice sharing). Removed preloaded software and formatted fat32. Disk will be mounted and recognized when connected to any mac directly. When connected to the usb port on the airport extreme it begins to initialize and then bombs. Airport gives the orange death light and there is no connectivity to the router for all (ie internet connection, etc.) When you unglug the HDD the router reboots and then goes back to green light of peacefulness. What am I missing? Setting? Order of connection? Not hitting it hard enough on the ground with a large 10lb sledge hammer? Help me out...

    you may need to restart the AEBSn with the drive plugged in.
    since it might have been long since the AEBSn was restarted and anything else attached to it.
    or a restore to factory settings...
    i know not the best you want to hear, it should just work.
    make sure all the AEBSn updates are there...etcetc
    i was having this problem the past month or so and it started working again flawlessly after a few restarts.

  • Satellite Z30 vs Portege Z30

    From what I can tell (and have confirmed with Toshiba Customer support) the Satellite Z30 is identical to the Portege Z30 except for the following differences:
    * The Portege Z30 has Active Management Technology (AMT), allowing certain remote administration for enterprise environments
    * The Portege Z30 has a 3 year warranty (as opposed to the Satellite's 1 year)
    * The Portege Z30 is preinstalled with Windows 7 and Windows 7 system restore partitions (and Windows 8.1 media provided) whereas the Satellite comes preinstalled with Windows 8.1 system and restore partitions
    My question is whether the roll out of an image taken from a Portege Z30's Windows 7 installation will transfer to Satellite Z30 machines? I suspect there will be no issues with the hardware, but am curious about the Windows activation and whether the SLP key on the Satellites will match the Portege.

    I don't have time to check exact difference because these two models because notebooks are country specific products and it can happen that offer in your country is not the same as in some other and you can check this by your local dealer.
    Anyway, at first I must say that that Portege notebooks are business line products. Satellite models are more for people who don't have some special needs and mostly common notebook users.
    With Portege line Toshiba offers some benefits like better hardware, more options, very often two operating systems, maybe some additional software and of course different warranty conditions.
    According to this Portege notebooks are more expensive.
    Back to your question: recovery image is specific image designed for certain notebook model.
    I don't know which Portege do you mean exactly. Toshiba offers Z30-A and Z30T-A. For instance Z30-A is offered as 6 different models. You know it is not easy to say how it will works.
    Theoretically you can try to install this image and see what will happen.
    I don't know if you will be so lucky to find someone here who can confirm that such installation will be 100% OK.

  • I have firefox 4 beta on Windows XP - do I need vista or W7 to have that orange menu button on the left? on my notebook with Vista FF4 looks different than on pc with XP - why?

    what do I have to do to have that orange button in FF4 on Win XP?

    Right-click the Menu bar ''(File, Edit, etc)'' and click on the Menu bar item in that Context menu, so the check-mark is gone.

  • Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

    hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • I dont see a Holster icon in the Z30 settings menu

    How do i set the notification settings for email, text, email, etc for my Z30 while it is in the holster? In the user guide it says ;
    1. In the Phone app, swipe down from the top of the screen. (done)
    2.Tap > Holster (I dont see this icon...)
    I am having a Z30 with BB10 OS 10.2.0.224

    currently there are no holster settings like there was in BBOS 7 and prior
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Magsafe light flashes orange/green

    I've just bought a used MBP 2.2 MHZ which operates fine except for switching back and forth between charging modes when the battery is around 85% full. The magsafe light stays orange a few seconds, then shows green for a second, then back to orange; the charging indicator on the screen switches at the same time. I swapped to a known working magsafe charger - same result. Operating on battery power is also a bit strange, with the available percentage of battery jerking around. Looking around, I see some 2007 and 2008 threads about this issue, but no final resolution at that time. Is there now a "bottom line" to this problem? Thanks!

    No, it's not a battery calibration issue - but it could be a bad battery. The flashing MagSafe is a hardware issue. Since the SMC is the controller for power systems, resetting it is about all you can do for 'software' type of fix. If that doesn't correct it, the problem is either with the adapter itself (which you apparently ruled out), with the battery, or with an internal component (more likely the left I/O board, but possibly also the logic board itself).
    The fact that your available percentage jumps around points to a deeper problem (time remaining can jump around depending on system load, but % charge should go in only one direction when running on battery).
    Given your symptoms, I'd be inclined to try a replacement battery first, before looking inside the case for a problem.
    If there's an Apple Store near you, make a Genius Bar appointment and let them have a look - they will be able to test the battery as well.
    If you like, post your Full Charge Capacity and Cycle Count (from Apple menu > About this Mac . More Info > Power) for a preliminary diagnosis...

  • Sim error MM#3 (If it isn't the sim, could it be hardware related?) - Z30

    So yesterday I get off a phone call and I get kicked off the mobile network. I look in settings and it is shifting from Bell then to Rogers (I'm on Telus) with sim MM#3 error.
    I called support, and they told me everything is fine on their end. So I tried a restart and it fixed the problem. But today, I had the same MM#3 message after ending a call. Another restart and it's fine. I called Telus again and this time they said remove the sim and put it back in. Did that.
    The phone is working still, but if it happens again I'm not sure what to do. Obviously I'd get another SIM, but I'm also curious it it could be hardware related? I've had the Z30 since November 2013 and I've never had this issue before.
    Any thoughts? Is there any way to run a diagnostic on the phone itself to test for hardware issues?

    I would also recommend a new SIM card. I haven't seen this issue with other #Z30 devices.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT5527 Why is it that when I bought my first generation iPad in October of 2010 the Apple sales rep at the Orange County California store suggested that I pay $99 for Mobile Me "coverage" and told me it was a "one time charge".

    Why is it when I bought my first generation iPad in October 2010 the sales rep at the Orange County California South Coast Plaza store suggested that I buy Mobile Me service for $99 which he assured me was a one time charge and now, of course, Mobile Me has been discontinued and I've been "forced" to move to the Cloud and I'm being provided with another year of what Apple calls complimentary service with the clear indication that in a year I'm going to be asked to pay again for something I paid a one time charge for two years ago?

    Mobile Me was the successor to .Mac (dot mac) which was "free" to all users but for a limited time. It included a free email address @mac.com and an amount of what we would now call "cloud" storage that went by the name of iDisk. iDisk worked great but with only dialup service for me it was barely useful.
    So I didn't think much of dot-mac but lots of people thought it was worth paying for, so they did. Apple wanted to make it even more useful and integrate it with their portable devices which we all know as iPads and iPhones, and assembled a team to make it all work. This was to be called Mobile Me.
    They failed miserably. Lots of people including me looked at the final product and said "huh?" Unfortunately for the Mobile Me engineers, one of those people was Steve Jobs. He first humiliated them quite publicly, then disbanded the team, including firing at least one senior manager who shall remain nameless.
    This was the rocky beginning of what is now called iCloud, which is the "free" service I should have explained. iCloud includes an email address @me.com, and the 5 GB of "storage" which aggregates things like iWork documents, your email, calendars, Photostream, and iPhone backups.
    You can buy more storage if you need more than 5 GB, but if you have more than that it's still free through September 2013.
    What happens if you have more than 5 GB stored on iCloud and on September 2013 you don't pay? I'm not sure, but you have a year to think about it.

  • Problem with 6101 and Orange UK: phone silently ge...

    Hello, I have a Nokia 6101 and I've twice experienced an incredibly annoying problem with it (to use mild words). I did a good search on the forum but I didn't find anything. First of all, I must say that the phone was originally bought in Italy (from Telecom Italia Mobile) and then moved to England, where I'm using it with Orange UK. I just exchanged the SIMs and it worked fine at once, so I assumed everything was OK. The problem I mentioned is as follows: the phone appears to work normally and reports good strength for the signal BUT if people actually try to call me the phone doesn't ring at all and (so I've been told) is seen as switched off. Furthermore -- even worse -- apparently they are also unable to text me (the text is somehow rejected, I don't know the exact error message other people get). Also, if I try to call or text someone while the phone is in this zombie state it doesn't work (sorry I didn't write down the exact error message I got). In fact trying to use the phone is he only way of knowing that something is wrong. I've been using this phone for about a month and this thing has happened (as far as I know!) twice, once just a few days after I first got the phone, and the second time yesterday (which caused an untold amount of distress as I was waiting for an important call). Switching the phone off and then on again solved the problem in both cases, so I assume is some sort of firmware problem, possibly a minor incompatibility between my phone/firmware and Orange Uk. Has anybody come across a problem like this? What should I do? Any suggestion would be very welcome, because otherwise I'll have to do sample calls every 15 minutes just to check that the phone is working properly! This are the details of my firmware, as given by *#0000#: Nokia 6101 V 04.50 RM-76 (c) Nokia. Language: V 04.50 19-12-05 RM-76 Thanks, Lorenzo

        Hi papaluciano!
    You're working in Luxembourg, but your SIM card is not allowing your phone to work! This must be irritating for you. Because you got your SIM card from Orange, please discuss the issue with them for a resolution. When buying a SIM card internationally, you are using the service of the other carrier. In addition, this is not something that would need an update. Please let me know how this works out for you. Thanks!
    Christina B
    VZW Support
    Follow us on Twitter @VZWSupport

  • I am trying to unlock my iphone from Orange to "3".

    I have requested the neccessary details from Orange. And paid for it.
    I have followed the instructions but the phone will NOT activate either by phone itself or iTunes.
    I have tried it with an Orange card in and also a 3 card.
    Its pathetic that something is made so difficult to do.
    I need help with this as it is driving me mad.
    I have also looked all over the internet and this is a very common probem
    Help please

    Did you follow the steps exactly in the email you got from Orange
    to unlock the iPhone? At the end of those steps, did iTunes give you
    the message 'Congratulations. Your iPhone is now unlocked''?
    If you did not get that message, your iPhone is still locked and only
    Orange can resolve the matter.
    If you did get that message before the update, repeat all the steps again
    to see if it will unlock now - you may have to do this multiple times for
    it to work.
    What does it say when you look at Settings=?General=>About=>Carrier?

  • I am trying to unlock a phone that I have brought that is originally locked to orange, I have an email from orange with all the instructions but I cannot find my phone when I go into itunes, help!!!!

    I have recently brought an iPhone from a friend that is locked to orange network, I have an email from them explaining how to unlock the phone:-
    Connect to iTunes using USB
    Use the 'restore' option within iTunes (located at the bottom of iTunes not the top)
    I cannot find the restore option, having been trying for about 3 hours now, someone please help!!!!!!

    Follow this
    iPhone: About unlocking
    Suggest you reboot PC/Mac and reset iPhone before starting
    You are plugging the iPhone into the PC/MAC ,aren't you

Maybe you are looking for

  • How to use security token in WLS 9.2

    I am using Workshop with Weblogic Server 9.2 to implement a Web services with security token (UsernameToken). I have successfully create the web services by using @Policy(uri="Policy:Auth.xml", direction=Policy.Direction.inbound). I use the default a

  • Html content in reports

    Hi everybody, I used HTML DB successfuly to develop two web applications for my customers, I found it a great web application development framework!!! Now I am working on a sample application TAHA Weblog that I would like to submit to HTMLDB Studio.

  • Order by in subselect

    Hello, when using a ORDER BY clause in a subquery, i get the following error: Error - Auto Commit: On, SQL Mode: Internal, Isolation Level: Committed General error;-5016 POS(286) Missing delimiter: ) SELECT *      FROM DOCPROTOCOL D      WHERE D.DOCI

  • Does Cisco ISE 1.2 support Catalyst SRW224G4P and Small business ESW520 Switches?

    Hello all, Does Cisco ISE 1.2 support Catalyst SRW224G4P and Small business ESW520 Switches? Best regards.

  • Regarding import

    I was trying to import some entries through ldapmodify operation.but i got this error.... Error adding object 'dn: cn=COMPETITIVE SHOP+uid=CSUSER, ou=ST_NO, o=xxxxx, c=US'. The error sent by the server was Constraint violation. Another entry with the