Z30 connection to Plantronics Voyager Legend

z30 won't connect to Earpiece
Shows up as "One" and says "Connont connect with One"
Help!!!

This worked for me:
To Pair Voyager Legend to a Different Phone or Re-Pair to the Same Phone:
Turn the headset on. Slide the power switch to the 'on' position showing green.
Using voice commands. Tap the Voice button on your Voyager Legend and say “Pair mode,” or Press and hold the Call button on your Voyager Legend until you hear “Pairing”
Turn on your phone’s Bluetooth feature. While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > General > Bluetooth > On
• Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devicesNOTE: Menus may vary by device
Select Voyager Legend. Select “PLT_Legend" on your phone as a found device. If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.
Complete pairing process. Once successfully paired, LEDs on the Voyager Legend will stop flashing red/blue and you will hear “pairing successful.” from the headset.NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you.Your phone should now be paired with the Plantronics Voyager Legend headset and ready for use.

Similar Messages

Plantronics voyager legend not pairing to iPhone 6

My iPhone 6 does not recognize my Plantronics Voyager Legend headset. It worked fine on my iPhone 5 with OS 8.02. Any ideas how to connect the two?

This worked for me:
To Pair Voyager Legend to a Different Phone or Re-Pair to the Same Phone:
Turn the headset on. Slide the power switch to the 'on' position showing green.
Using voice commands. Tap the Voice button on your Voyager Legend and say “Pair mode,” or Press and hold the Call button on your Voyager Legend until you hear “Pairing”
Turn on your phone’s Bluetooth feature. While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > General > Bluetooth > On
• Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devicesNOTE: Menus may vary by device
Select Voyager Legend. Select “PLT_Legend" on your phone as a found device. If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.
Complete pairing process. Once successfully paired, LEDs on the Voyager Legend will stop flashing red/blue and you will hear “pairing successful.” from the headset.NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you.Your phone should now be paired with the Plantronics Voyager Legend headset and ready for use.

Pair plantronics voyager legends

Since upgrading to Yosemite on my MacBook Air I can no longer pair my Plantronics Voyager Legend bluetooth headset.
I am able to connect to my iPhone6 (IOS 8).
any suggestions?

I should works since it supports the A2DP and AVRCP profiles which are also supported by the iPad. From the Plantronics site:
Bluetooth Profiles Supported:
Advanced Audio Distribution (A2DP)
Audio/Video Remote Control (AVRCP)
Hands-free v1.5 (HFP)
Headset v1.1 (HSP)
Secure Simple Pairing (SSP)
http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/stdadp.php?p_faqid=18753&p_created=1287701497&p_sid=m5Q1qdmk&p_accessibility=0&p_re direct=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9Njgs NjgmcF9wcm9kcz0mcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNo X25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9UGxhbnRyb25pY3MgVm95YWdlciBQUk8!&p_li=&p_top view=1#productspecifications

Unable to pair my Plantronics Voyager Legend to My iPhone 4s using ios 6.1.1

i have problem pairing my Plantronics Voyager Legend with my iPhone 4s using ios 6.1.1
anyone can help me?

If you have Samsung Android phones, get Viber or Whatsapp, it feels just like texting but it's a free messaging/chat service instead.
But talk to your provider, they should be able to identify if there's any international restrictions active on the accounts.

Ipad 2 blue tooth not pairing with plantronics voyager legend

Ipad 2 is not pairing with plantronics Voyager Legend (blue thooh) but this device (blue thooh) is pairing working good with my iphone 4s

http://www.plantronics.com/us/support/kb/detail.jsp?vfurl=/articles/en_US/Troubl eshooting/Compatibility-statement-in-regards-to-the-Apple-iphone-5-and-the-Voyag er-Legend&retURL=%2Fapex%2FknowledgeSearch&region=us&p=&c=All&k=Voyager%2BLegend &t=All&lang=en_US&popup=false&c=All

Galaxy S5 and Plantronics Voyager Legend

I got the Voyager Legend Headset when I preordered my S5. The headset worked perfect with my Motorola Razr maxx.
Now with my S5 the headset auto answers every call as long as it is turned on and paired to the phone. Doesn't matter if it's on my ear or not it will auto answer the call.
I took it into a Verizon store they weren't able to determine why. They even grabbed a brand new one off the shelf, paired it to my phone and it did the same thing. I contacted Plantronics whet through all of their troubleshooting and still no change. Plantroncis recommended exchanging it for a new one.
Since I had seen another one already have this issue I thought I'd post this on this forum and see if anyone else is having this problem and see if anyone has found a solution.
Things I've done.
1) Installed the Plantronics app and checked all the settings
2) Updated the firmware on the headset and checked the settings with the plantronics website
3) Tried changing all the "answering and ending call" options on the S5
4) Unpairing the headset and repairing it.
5) Tried using the headset with the s5 in safe mode
Anyone have any more thoughts or suggestions?

I have recently just got the solution.
Even Samsing wasn't able to help. After going through all the settings on the S5 I found the fix.
Go to Settings --> Applications --> Call --> Call Accessories. There is an option for Automatic Answering. Uncheck that.
The headset will now work perfectly.

Plantronics Voyager Legend and my iPhone 4

sometimes my audio will switch from my Plantronics blue tooth to just coming out of the iphone.
i will push the audio button and sometimes it will show the blue tooth still checked, other times iPhone will be checked.
Also, there are times I push the button on my Voyager, hear the tone, and wait for voice control to be activated on my iPhone, but it doesn't happen.
anybody else seen this? why does it just switch back and forth, and why can't i consistently invoke voice control via my Voyager? I recently updated the firmware on my Voyager and am still seeing the same problems.

Hi wbnelso1,
Welcome to the Apple Support Communities!
I undress and that it can be very frustrating when your car Bluetooth connection is not working as you would expect. In your situation, I would recommend using the troubleshooting steps outlined in the attached article.
iOS: Troubleshooting car stereo connections
Have a great day,
Joe

Voyager Legend will not work with my laptop

I have an HP Pavilion dv6-3120us Entertainment Notebook PC with Windows 7(64-bit). I recently purchased a new bluetooth headset and am unable to get it to work with my laptop. The Previous headset was a Plantronics Voyager Pro which worked great with my laptop, all I had to do was pair it and that was that. My new headset is the Plantronics Voyager Legend and after pairing, it starts installing drivers and all but one are fine.
Bluetooth AV Ready to use
Bluetooth Remote Control Ready to use
Bluetooth AV Remote Control Target Ready to use
Bluetooth Peripheral Device No Driver Found
Bluetooth Hands-free Ready to use
I've uninstalled, reinstalled several times and it didn't help, It shows that the device is paired, but doesn't reroute audio to the headset or the microphone. It shows in audio devices but says disconnected, when I click on 'connect', nothing happens and 'set as default' is grayed out and I cannot select it. I know that there is a separate bluetooth USB adapter available, but I'm using the headset mostly for my phone (which works fine) and occasionally my laptop so I don't really want to purchase it. I've already contacted Plantronics about the issue and this was their response:
"Thank you for contacting Plantronics Technical Support.
If you are using built in blue tooth and not our blue tooth USB adapter unfortunately we cannot assist you with your built in blue tooth, Plantronics does not supply drivers, here is our statement with regards to using built in blue tooth:
If you are pairing the headset directly to your computer, the drivers that are required are for your computer's internal Bluetooth adapter. You will need the drivers supplied by your computer's manufacturer in order for you to use your Bluetooth headset as an audio device.
Different computer manufacturers and computer models will use different internal Bluetooth adapters, so you'll have to contact your computer manufacturer to get those drivers. Most major computer manufacturers have a "Drivers" or "Drivers and Downloads" page on their web site in which you can enter your computer model in order to retrieve available drivers. You can typically find the Bluetooth drivers under the "Network" category. "
I've checked for bluetooth driver updates and it says that none are available, I've also uninstalled and reinstalled the bluetooth drivers from the laptop. Sorry that this is a short novel, but I wanted to make sure to give all available details, any help or advice would be welcome. Thank you in advance.

Hi Nt_winters,
Thank you for all the information, it is very useful. I understand you are having an issue with HP Pavilion dv6-3120us Notebook with Windows 7 and your new Plantronics Voyager Legend. In the device manager are all unknown devices removed as well as the Bluetooth devices for the headset? Broadcom is recommended for Plantronics Voyager Legend headsets. Here is a link to that driver.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Nokia 206 reset upon connected to Plantronics Voya...

Dear all,
I found my Nokia 206 phone will be reset upon connected (with bluebooth) to my Plantronics Voyager Legend handset. I could heard from the handset that the phone was connected, however, the phone will be reset (screen blanks out and appears again) and disconnect from the handset immedately. Note that I could connect to the handset with Samsung Note2 LTE, LG p990 and Nokia 2630 without problem.... do any one have idea to resolve this problem?
Thanks in advance!
Henry

Folks, some updates, I have visited local Nokia center regarding on this BT problem with Plantronics headset. However, Nokia reps just told me they have no problem with Nokia BT headset and opened a case to follow up with me. No one from Nokia have ever contacted me about the case for around two months "=.=.
I found from this forum that Asha 202 also got this problem. My 206 also have the same problem with Backbeat go. However, I tested the 206 with Motorola H270 and Samsung HM1300 BT headsets without problem...

Pre, Plantronics Voyager Pro, Connected ... but not

Is anybody else having problems with their Pre and the Plantronics Voyager Pro? I haven't really been able to figure out what's going on, but my connection is flaky. It'll work great for a while, and suddenly won't connect. I seem to have to power-cycle both the bluetooth on the Pre and on the Voyager Pro to ge them to reconnect. Here's what I've been experiencing:
1) Phone and Voyager Pro pair up just fine.
2) Make a call. Everything works great.
3) Do something wrong I haven't been able to replicate.
4) Connection between Pre and Voyager is terminated. Voyager beeps low tone to indicate this, but Pre still claims to be connected to the Voyager Pro. Bluetooth icon and top right menu item remain unchanged.
5) Turn the Voyager Pro OFF.
6) Pre still claims to be connected to a device that — now — isn't even on.
7) Turn Voyager Pro back on. Pre won't reconnect, presumably because it thinks it's still connected in the first place.
8) Power cycle Pre's bluetooth radio.
9) Honky-dory.
WTH?
Post relates to: Pre p100eww (Sprint)

Wow, it took a while for someone to confirm this one.
Are you using the screen lock feature? I was using the simple 4-digit pin and the ONLY thing that fixed this issue for me was to turn the screen locking feature off completely. Since then, I've had almost no problems with the headset.
It seems there's something going on in the OS where when the screen locks it disconnects the headset and it has trouble reacquiring. Especially if you're trying to answer a call from the headset while the screen is locked. It was such an inconsistent issue for me, though, I could never nail it down to just one thing causing the headset to drop and not reconnect.

Leopard and Plantronics Voyager 510 headset problem.

I try to post here a message that i've posted in another section of the support board, maybe this is more appropriate with the problem.
I have a plantronics voyager 510 bluetooth headset that i've alway used fine with Tiger. Since it's a multipoint headset, i use it with the mac and the nokia cellphone at the same time. When it was paired with tiger, after powering on the headset, the bluetooth connection was established only in case of need (for example when i received a call with skype). Then, at the end of the call, the bluetooth connection between headset and tiger stopped, so that in case of need i was able use it with the cellphone.
The problem i have with Leopard is that when i switch on the headset, osx start a connection with it immediately, also if it doesn't use it, so that the headset it's always connected and busy for nothing!
This is causing some trouble to me now. Is there any setting i'm missing? Note that in the audio preferences, i told to osx to NOT use the headset at all, which is just configured under the skype audio tab.
Thanks for your time.

having similar problems w/ 2 different devices since leopard install. both worked fine w/ tiger

HT204368 Plantronics voyager pro Hd troubleshooting with I phone4 5.1.1

I had I phone 4 and just bought Plantronics voyager pro hd,but from time I bought that Bluetooth headset it's giving crackling noise and the sound quality is not very good when I talk to some one, I got replaced my I phone and even Bluetooth device but I am facing the same problem again, had words with customer care guy and he said me to restore settings and to start as a new I phone but it also didn't worked out.
Any suggestions please.

Hey iacobdoc,
Thanks for the question. The following articles provide the most relevant information to your issue:
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Bluetooth disconnects, intermittent connectivity, or unable to find
- Move your iOS device closer to the Bluetooth accessory.
- Position your iOS device and Bluetooth accessory in direct line of sight of each other. For example, move the Bluetooth accessory and iOS device to the same side of your body.
- Remove any case, stand, or other accessories from your iOS device and see if performance improves.
- Check for sources of potential interference and move both the iOS device and the Bluetooth accessory away from other electronic devices.
- Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
- Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN, and APN settings.
Thanks,
Matt M.

Pairing a Plantronics Voyager Pro HD with Skype

Has anyone sucessfully used the Plantronics Voyager Pro HD with Skype on the iPad 3?
I can get it to work with audio such as music but the headset does not receive sound through the earpeice, only through the iPad speaker.
Is there a setting for this I am missing?
Thanks.

Hey iacobdoc,
Thanks for the question. The following articles provide the most relevant information to your issue:
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Bluetooth disconnects, intermittent connectivity, or unable to find
- Move your iOS device closer to the Bluetooth accessory.
- Position your iOS device and Bluetooth accessory in direct line of sight of each other. For example, move the Bluetooth accessory and iOS device to the same side of your body.
- Remove any case, stand, or other accessories from your iOS device and see if performance improves.
- Check for sources of potential interference and move both the iOS device and the Bluetooth accessory away from other electronic devices.
- Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
- Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN, and APN settings.
Thanks,
Matt M.

Plantronics Voyager Pro

I am using a blueant T-1 headset with my iPhone 4s. The people on the other end of the conversation can't understand most of our conversations and complain that it is very muddy sounding. I have a plantronics voyager headset that works well as far as audio clarity. It doesn't announce the caller name in my headset like the blueant. My question is if anyone out there has the pro series headset from plantronics does it announce the incoming callers name??
Any information will be greatly appreciated.

Thanks for your feedback, and I will not do that again :-)
Model: 2779-A17
OS: Windows XP Professional (Version 2002, Service Pack 3)
Pressing Fn-F5 takes me to "Change Power Settings of Wireless Radios".
When bluetooth is on, I manage to pair and connect my headset. However, except from registering the headset as an "audio device" my PC seems unable to register any possible services of this bluetooth audio device, hence the feedback from Plantronics stating that I need a computer that supports the "profile" (see first post).
Anyone?
m

Plantronics Voyager Pro+ iPhone 6 pair disconnects

Brand new iPhone 6, 128gb. Version 8.1.3 (12B466). Paired my Plantronics Voyager Pro+ with it, first bluetooth thing paired with the phone. Paired easily.
What happens is, if my phone is idle for some period of time and the screen shuts off, when I get an incoming call, I find that the headset is no longer connected, even though the iPhone shows the bluetooth connection is there. If I wait for a connection to happen, it never will. I have to turn off the headset, turn it back on, at which point it connects to the phone without incident.
I have three other devices paired with the phone now. I find that my car's bluetooth has a similar issue - it un-pairs and re-pairs from time to time. (2014 Mercedes ML350). My wife's iPhone 5 does NOT have the problem with the car. This headset, and three others from other manufacturers, worked without drama with my previous phone, a Motorola Razr Maxx HD; my car had the same disconnect/reconnect problem from time to time, so I'm assuming THAT issue is the car's problem.
I've seen a huge number of complaints back late last year, so many I can't wade through to see if there are still issues. The solution was supposed to be v8.1 of iOS. Clearly not for me.
Is there some setting I should re-do? Doing a full reset of the phone seems to be an absurd thing to do, given that this happened with a brand new clean phone and the first bluetooth item paired to it. I STARTED with a re-set phone...
Help appreciated.

Hi Susabella, great to hear. However mine is Plantronics Voyager Pro (no Plus,not sure whether it's different) and my iPad 1 still can't find it (yes my Plantronics was in discoverable mode). I read the tread and it says iPad 1 doesn't support HFP 1.5.
http://support.apple.com/kb/ht3647
may be that's the reasons. Thks for you reply too.

Z30 connection to Plantronics Voyager Legend

Similar Messages

Maybe you are looking for