Z30 not boot: no screen, not led lights, nothing...

Hi,
I can't believe this is happening to me. it's mt 4th blackberry, but something like that never happened before.
I have z30 for a year now.
today, after finished a phone call and starting a new phone call, the phone calls app stop responding. so I decided to restart my phone.
I did a restart (with the menus) and the blackberry stuch on the white blackberry logo. I tried a several times, with charger without charger, I pressed a 5 seconds on the power menu to get it restart over and over and the same result.
after the red light the blackberry white logo appeared on the screen and that's it. I waited an hour, but it's just stuck there.
I didn't install any new apps lately.
so I connected the blackberry to the pc and try with the blackberry link software to do a manufactor reset.
it's failed right at the beginning. It's look like when the red light appear it connected to the pc and when the blackberry logo appear it's disconnected from the pc.
so I thought to make an os upgrade. I just don't care anymore about my data, just to get the phone work again.
so I downloaded a new os version from here and it start ok. detect the blackberry, start to load the image and the about 30% it says "failed to load image" and that's it.
the blackberry now dont even start. no lights when pressing the button, tried to reinstall the os upgrade, nothing....
is my blackberry z30 is dead?
can I do something to fix it? buy a new motherboard or something?
thanks for your help...

My opinion its just a bad luck. Hardware parts can start to malfunction.
My Toshiba notebook has been running since 6 years without any troubles.
My parents bought an notebook from another manufacture. After two days the motherboard died. Simply bad luck it was pity but the dealer replaced the faulty unit and since then it runs ok.
Mostly its not matter what notebook you would purchase. Such issues may happen simply.

Similar Messages

C700 Laptop: Not booting: Black screen: No BIOS

My 4 years old Compaq Presario c700 (C794) laptop is not booting up. Does not go into BIOS, and does not even show the message “Press F10 to enter BIOS” etc.
I see a clear black screen (but has backlit and I am able to adjust the brightness using Fn keys). Tried on the desktop monitor, it is black too.
The HD is running intermittently, all LEDs are on, and the fan is running.
Windows is not booting up, there is no log on sound. WIFI light is also orange, it becomes green after booting is complete. HD activity is on but it is not as much to boot up Windows 7.
Troubleshooting I did till now:
Hard reset by holding down the power button several times.
Cleaned RAM and placed it in another slot.
Removed the power and battery and kept it overnight.
Tried on the desktop monitor, it is black too.
This happened all of a sudden. I did not do any BIOS updates or anything that normally causes these kind of problem. I learned from some forums that an exhausted CMOS battery can cause it. Is it true? In this case, can you please give the location of the CMOS battery in these laptops?
What are the other measures I can take?

Hello again Hazarika.
I'll keep an eye out for your reply to make sure the issue is resolved.
I hope you have a Happy Holiday!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Pavilion G6 2249WM powers on but does not boot - black screen

I have a G6 2249wm that had a message that the fan wasn't working. I had the fan replaced and after it was replaced it would not boot. I could hear the fan running and the caps lock light blinked once about every 5 seconds and the amber wifi light was on. After researching and taking steps outlined in the HP Computer does not start (Windows 8), I found that the code meant that the CPU was bad. I had that replaced and the notebook is still in the same condition. Is there anything else that I can do to get this computer to work?
Pavilion G6 2249WM C2N47UA#ABA AMD A6 - 4400M
After troubleshooting a little more I find that when the laptop is started the hard drive does not turn on. I used a USB adapter to plug the hdd into my desktop and found that it does work. I then plugged a different hdd that I know works into the laptop and found the same issue. Does this mean that the motherboard is bad?

Hello @FLC123,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your notebook computer is producing a blinking light from the caps lock, and that the screen is blank. I would be happy to help you!
Since this symptom code is appearing after you have replaced the CPU, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Imac Intel will not boot up - 3 days old, light on, starts to spin...

I got an Imac Intel 20" from my husband on mother's day and it now will not turn on!! White light comes on, sounds like it is trying to boot and then nothing... blank screen, no beeps - have unplugged and restarted, tried a million key combination from the forums and still nothing... locked up once on "Garage?" software (according to son)... worked for 2 days...
Very dissapointed and sad... husband looking like the PC is still a better box even after breaking down and getting the Imac - can't help much because this is all new to him...
Help!

If you bought your imac with a credit card anywhere in your home state(or within 100 miles of your home in another state), then you can return it within 30 days if you are unsatisfied. That is federal law, and a store cannot do anything to deprive you of those rights--no matter what they say (or what they print on the receipt under your signature). My Apple store tried to tell me they only allow returns for 2 weeks. I told them the were violating federal law and they were required to issue a credit for the amount of the return, and they reluctantly complied.
I believe credit card companies are now required to print those rules on your bill (mine does and I don't think it would do so voluntarily), so you can check the fine print on your last bill and read them.
So, if you meet the above requirements, take your imac back . Insist on a refund. Be firm. If the retail person won't do it, tell them you want to speak to a manager. Once they credit your account, walk up to another retail person and tell them you want to buy a 20" imac.
If the retailer won't credit your account, then call your credit card company, and tell them you tried to return a defective product within the 30 day limit that you bought in your home state, and you would like them to reverse the charges.

System will not boot / black screen

:undecided:Problem: System does not boot. Black screen.
I just put this system together. I've returned the CPU and motherbd. for exchange, thinking one may be defective. Still No Boot. PowerSupply checks out good. MSI video card checks out good too. Could it be the memory stick? Pls. HELP. BTW - Yes, I did remember to plug in the 4-pin power connector.
Motherbd: MSI 865PE Neo2 (option2) (New)
CPU: INTEL P4 2.4G 1 MB L2 533MH (New)
http://www.newegg.com/app/viewproductdesc.asp?DEPA=0&description=19-116-141&ATT=Processors&CMP=OTC-B1zrat3
Memory: 1 dimm - 1GB PC2700 333MHz DDR SDRAM
http://www.ocsystem.com/1gbpc33ddrsd.html
VGA : MSI Video Card - Geforce FX5200-TD128 128MB TV-Out DVI-I (Tested Good)
http://www.ussa.com/ussaonline/product.asp?dept%5Fid=10610&pf%5Fid=100%2D106%2D1004159
PowerSupply : Enermax EG365P-VE-FC 350W (Tested Good)
HardDrive : 120GB WesternDigital

You got me there. I only looked at the LED's after it hangs.
I must wait for my reshippment of my memory. I returned it, and asked them to test it. If it tested good, then it probably not compatible with system. My next option was to order GIGARAM 1GB, since it is on the list of recommended DDR.
Sorry, I cannot reboot at the moment. Do you think it is the memory, or something else?
Thanks,

S10 would not boot, blank screen, hardware problem??

hello all,
my s10 was working perfectly the previous night, but the next day when i press the power button, the screen was blank.
When I press the power button, the blue light came on to indicate power, and also the wireless light came on.
The fan also started up, but then it turns off, leaving a blank screen, it seems nothing was booting or working except for those 2 lights. I have tried it with battery in and out and also with AC. But it still doesn't work.
Is it a hardware (like maybe circuit or harddrive) problem? As when I decide to hold down and press on power button when i found out is not working, the screen flickers and the computer shuts down.
I got some important school work, last yr of high school, hopefully someone can help me to get my computer running again, is only 5 months old =[
Thank you, canicecy =]

I will propose you something close to one thing done but slightly different and tried (and worked) many times and with many different laptops having the same issue as yours. You need to Reset any possible electrostatic Charge.
take off the battery and the power cable (this means no contact to any current)
press continuously the power button for 10 seconds.
plug back everything and retry
if it persists you can try it a second time but if after this it's still the same you must call the hotline and repair you unit as long as you are under warranty.
...Information Technology is simple logic...
(Series on main concern: Y, U, K, S and all the OSs)

Portege 2010 does not boot - blank screen

Hi There
I need some help as my 2010 does not boot up. When I press the power button the power light comes on but I get nothing on the screen.
It was working when my brother was using it until the mouse froze and then he powered it off. He then powered it back on in which case only the power light came on with nothing on the screen.
The hard drive was clicking when it was working so I do have a gut feeling that the hard drive must have died and causing the laptop not to come back on as when I power it on I don't get no hard drive light or sound form the hard drive at all.
I don't even get anything on screen. Not even the red Toshiba boot sign. So that's worry in me as well.
Many Thanks, Jagz

Hi
I dont think its a HDD problem.
If the HDD would be dead you will get a message on the screen saying the notebook is not able to find a booting device.
If the Toshiba splash screen does not appear I think its something wrong with the motherboard. I assume the graphic card is dead. But to be 100% sure a check is needed.
In my opinion you should ask a service partner or an technician for an help.

Imac will not boot. black screen, no sounds.. but has power.

Hi guys, yesterday my mac would not boot. The screen is black, and the power light on the bottom right hand corner is on. My warranty expired 30 days ago (figures). I stupidly put in a CD to see if the player had power and it did (now I can't get it out). I can hear the fan on, and the DVD drive spinning. I have no chimes or sounds. I removed the memory and started the machine... same thing except the power light started flashing. I put the memory back in and powered it up.. same as before solid light, black screen, and no sounds. I unplugged the unit for a day which did not help. ANY help would be appreciated!
Imac - Intel Mac OS X (10.4.9)

First, boot and hold down mouse key to get CD out. then,
Try this.
Turn on Mac and hold down command-S (Apple S), it will boot into single user mode (white on black). Let it finish.
When it is done type the following.
fsck -fy
then hit return. It will check the disk and make repairs. It can take several minutes. If it finds errors it will fix and say OK. If so, type fsck -fy and run it again. This time if it doesn't find any errors type
reboot
Hopefully it will boot into OS X.

Will not boot - Black screen A2 code on bottom right.

mobo:Z97S SLI KRAIT EDITION
Samsung SSD - Windows and games are installed here
WD HDD - Everything else is put on this one.
Windows 7
I installed an ISO mounting program called Gizmo Central onto my HDD
After installation it said that it needed to restart. After it restarted I got a black screen with an A2 code. The screen will go completely black, and then it will back to the screen with the A2 code in the bottom right. It won't boot up BIOS, unless I do 1 of 2 things:
1. power off the pc, unplug the sata cable from the HDD, power pc back on, bios and windows will boot up. I can then turn the pc off, plug the sata cable back into the HDD, and it boots up fine into windows, but if I reboot again, it goes back to that black screen with the A2.
2. I have put in a disc into the dvd drive, and I do not get that screen. (I've been doing this as a workaround since it's much easier)
I have tried a number of things to resolve this, but none of them have restored my computer to it's perfect working order that it was previous to installing this program.
When I tried to uninstall that program it wasn't even on my installed programs list, so I deleted the folder it was in. This didn't resolve the issue.
I have wiped everything off of my HDD drive. This did not resolve the issue.
I have triple checked that my SSD is the first in the boot order. I even disabled the HDD from the HD boot order entirely. No change...
I updated my motherboard drivers. No change.
It's almost like for whatever reason my BIOS isn't listening to the boot order and doing my DVD drive, HDD, and then the SSD ever since I installed that Gizmo ISO mounting program.
I set the BIOS to factory default settings. That did not fix this issue.
I have use a windows system restore point from 2 days ago when it was working flawlessly. No change.
I'm thinking about reinstalling Windows, but logically it doesn't make sense to do that since the error happens even if I power off/on from BIOS with the HDD plugged in, so it I'm willing to venture that it's not Windows at fault here.
Also the computer used to boot up in like 8 seconds. It's still fast to boot up, but ever since this started to happen, it takes like 15-30 seconds for my usb mouse, and usb keyboard to register after windows starts up. It use to be immediate. My computer is so messed up right now, and I don't even know how it got like this or how to fix it. I'm pretty savvy and can follow directions well, so any help would be greatly appreciated.

Quote from: JLio01 on 29-April-15, 06:56:47
What intel USB driver version do you use? There's one more thing to try, try plug the kb/ms to USB 3.0 ports except the ones under the LAN port, and check if it happens again.
I'm glad you recommended checking Intel drivers. I typed appwiz.cpl to go to the installed programs list in windows. Found "intel USB 3.0 extensible host controller". I tried uninstalling this. It made my mouse and keyboard not work for about 1 minutes. Windows downloaded some drivers for my devices, and asked to reboot. I rebooted. Mouse/keyboard responded right away! Just incase it was a fluke I rebooted another 2 times, and each time the mouse and keyboard are immediately responsive. I'm SO glad that my PC is back to it's original working order. Thank you to you all for taking time out of your day to help me. I really appreciate it!

T410i not booting / black screen

Hi all,
Yesterday I installed Windows 7 Professional (had Linux before) and I installed the latest Intel graphics driver along with the latest BIOS update. In the middle of the of BIOS installation the system froze. I shut it down by holding the power button and now the system wont boot. I've had no such issues before so I'm thinking there might be a correlation between the failed BIOS update and the black screen.
When I press the power button all the LEDs light up usual, there's no beep, and no screen activity at all, pitch black.
I've pulled out the RAM (all of it), HDD, Ultrabay, battery and even the on-board battery under the keyboard.
Any thoughts are much appreciated!

Call Lenovo service. It is a case of warranty.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Satellite L305D-S5934 does not boot - blank screen

I have a problem with a 2 year old satellite l305d-s5934.
On switching on, the power light comes on but the hard drive light does not and the screen stays blank.
I have tried removing the battery and restarting without it after pressing power button, but nothing changes.
Any advice on fixing the problem would be welcome.
Thanks

Hi
Remove battery, disconnect the AC adaptor and leave the notebook disconnected for a longer period of time. After that connect both parts can try to power up the unit once again
If this does not help, check the RAM. Remove the single module and test both slots using each module.
Of course it could be possible that both modules are faulty and this procedure would not help you.
In worst case the motherboard might be affected in such case only mobo replacement would be helpful.

Laptop blank screen flashing led lights

The HP dv7 laptop blank/black screen with the continuously flashing CapsLk & Num Lock led lights is probably indicative of an overheated graphics processing unit (gpu) on the system/mother board. On the one that I am trying to repair it is an ATI gpu. The gpu is built into the system/mother board.
If laptop gpu is failing then the blinking diagnostic code of the CapsLk & Num lock led lights blinking once would seem to apply. Why even though led lights are flashing continuously? Because the laptop boot tries to load through the gpu via the cpu and fails which thereby triggers the one flashing light then it retries flashing the light again (and again and again continuously). As other posters have commented HP did not seem to care about a design flaw so they hesitate and ignore that fact – they will often tell you that the system/mother board needs replacement. As a matter of record you can see another thread (http://h30434.www3.hp.com/t5/Notebook-Hardware/Blinking-caps-and-num-lock-lights/m-p/29560#M3853) that has 19 pages of posts with over 230,00 views – unfortunately it has been deemed read only by the HP forum now.
I would refrain from an exact duplicate replacement motherboard without proof that the gpu has been corrected on the replacement board. Ebay has a number of replacement system/mother boards that are less than the over $300 price that HP has quoted for the repair. There has even been a listing for an upgraded board that deals specifically with the gpu issue. If the laptop has 17” monitor like the dv7 it may be very well worth replacing the system/mother board.

I have a little more to add
If I turn it on normally, nothing happens on the memory stick (no lights or anything)
If I turn it on while holding down Windows and B, the memory stick turns on after about 15-20 seconds, the light flashes for about 5 seconds then it stops flashing, it just sits on a solid light.
Its almost as if it is searching the memory stick for the files but fails to find them.
I used sp65000.exe to create the recovery stick

Macbook Pro will not boot up normally ***Not Normal Problems***

Ok. I have an older 17" Macbook pro 2.33 (10.6 fully updated) that will not boot up in normal mode. When I boot it shows "blocks" of different colors and will not get past the blue screen sometimes. When it does get passed the the blue or grey screen it is a split screen of white back ground with large black blocks seperating the sides. I have tried swapping out harddrives with a known working one with an OSX image on it-no good. I have tried swapping out ram-same thing. I reset the SMC and PRAM-only colors changed in the blocks. I have ran disk utilites disk and permisions with no problems. I can't boot into a restore disk using the c key during boot, It locks up at the same screen. Nothing works except safe mode. I can boot into safe mode and everything works just fine with normal screen and all. Now I tried runing the Lion installer thinking it is and driver issue but I can't get Lion to boot to the hard drive and Snow leopard just reboots back to the same screen. So how can I get Lion to install or Snow Leopard?
What can I do? I noticed this last weekend when I tried to reboot my MB Pro and it started this. Well Apple pushed and update last friday - I needed to restart it again and this happends. I thought it was a logic board at fist until it booted fine in safe mode.

Sorry. What I mean is I selected the SL boot up in the start up panel and it would not boot into the cd. The CD rom sounds like it just keeps reading with it slowly loading from grey screen to blue screen to the Block screen. Almost like it is booting into normal mode from the hard drive.
What I can't understand is why it runs fine is Safe mode?
Also why do I get a " this disk cannot be used to start up your computer" message on my hard drive when trying to install Lion in safe mode? Well why not it's the only hard drive in the computer?
The first screen shot is the Tech tool showing everything passed the hardware test is safe mode.

Macbook Leopard 10.5 is not booting up and not even getting Verified Error : Invalid Node Structure

Hey, I am using Macbook Leopard 10.5, Yesterday while i was working it was on low battery i thought to connect it later, but all of a suddent its stopped fucntioning and everything goes blank. I thought it might be a Battery problem, but even after connecting charger for 2-3 hours, its not booting up. Only the Apple screen comes and then it goes shut down automatically.
I even tried to fix it using Apple CD, Disk utility, When i tried to Verify the disk It shows following error :
Disk cannot be repaired or verify.
And details : Invalid Node structure
Volume needs to be repaired error : Filesystem verify or repair failed.
I have very important Data on this disk, so i cannot even erase it.
Suggest me somehting. It have enough space to install new OS but System shows you need erase it.
I have tried to use Apple Hardware test by Holding D key, But its not working.

Helloi
http://supportdb.alsoft.com:591/FMPro?-db=alsoftsupport&-lay=main&-sortfield=Dat e&-sortorder=descend&Keywords=node&Product=%22%22&-op=lte&Date=%2F%2F&-max=15&-f ormat=AlsoftSupport-qa.html&-script=counter&-token=177&-Skip=0&-find

IPhone 4s does not boot and seems not to charge

My iPhone 4S has been charging for 20 hours now (with red bar in the battery on the display), but it will not boot. Also pressing home+hold for 10 seconds (while connected to power) or more does not make it boot.
I have the impression that something is wrong with the part that measures the battery level, since (when it still worked) I sometimes had battery levels dropping to 1% very early after charging, but with the phone still working for over 10 hours after that (so the actual battery charge was much higher than displayed). This problem disappeared and reappeared every now and then. Until now however, I was always able to reboot my phone after a bit of charging - but this seems no longer possible. Recommendations are welcome....

However i can't check settings because the display does not respond, i tried to use three fingers, but nothing happens. It can receive phone calls and notifications, but the display still is not responding so i can't answer phone calls. But now the Led is off.

Z30 not boot: no screen, not led lights, nothing...

Similar Messages

Maybe you are looking for