Z3100 printing with PS CS6 or PS CC

Why can I not print thru my HPZ3100 with either PS CS6 or PS CC? All print dialogue boxes work perfectly with PS CS4, but none of them work in PS CS6 or PS CC. I have the latest HP Z31000 driver.

Contact HP.
We're printing on a Z3100 at Adobe all the time, from Photoshop CS6 and CC, on Macintosh and Windows.

Similar Messages

I can't print with Photoshop cs6.

I can't print with Photoshop (CS6). My printer (HP iP6700D) works correct with every program, except Photoshop. When I choose File>Print, there appears only an error-message. And the command-line turns into grey.

In the meanwhile I detected the problem. I made a new user account in windows and now it works correctly. So it isn't a photoshop problem but probably a register error. I have to find out furtherThanks for your reaction.
[ excessive quoting removed by admin ]

Why am I having problems printing with Photoshop CS6?

My problems started when I upgraded to Adobe CS6. Colors are off, and prints are dull, almost murky. I thought it was the printer at first, so I swapped out all my ink (big mistake), cleaned the print heads (another mistake). None of these measures were necessary. I adjusted my CS6 color settings based on advice from sources like Linda.com. No improvement. Finally I saved my Photoshop file as a flat Tiff and printed from Mac Preview. The print was gorgeous! CS6 is the problem, I just don't know how to fix it. I'd hate to have to use Preview everytime I want to print from Photoshop. The printer is fine, the paper is fine, changing RGB settings doesn't help. Any ideas?
Later that same day:
I think I figured out a simple solution. When I selected the printing option to allow the printer to control color, rather than Photoshop, my print came out better. I've been reading threads all over the tubes and no one suggested that

Yes you solved your own question, use printer handles color, whcih shodul have been the default. If you do want to experiment with Photohsop manages color, try the CMYK profiles, and send a cmyk file. Only exception is if you print to one of the few RGB printers like a lambda.

Photoshop CS6 printing with Mac OS 10.10.2

I recently attempted to print a 13x19 photo on a Canon PIXMA 9500MarkII color printer using CS6. The printer driver continually reported an paper since error. Eventually, I gave up and tried to print the same photo with Apple's Preview application and it worked.
I contacted Canon support and they responded that the printing with Photoshop CS6 version 13.0.6 x64 is not compatible with OS 10.10.2.
Does anyone have a solution or know if Adobe will be updating CS6?

No.
Mylenium

How do I print to a postscript file with InDesign CS6 without both extensions, .indd.ps?

How do I print to a postscript file without an .indd extension in InDesign CS6? I choose Print, choose a print preset from my print shop and Save. The first time I tried it was blank (the Hide Extension was checked), so I tried to save and got a dialog box that said it cannot be saved as an .indd file (duh), to choose both or .ps. I chose .ps and it was fine, but every time I postscripted it gave me this dialog box until I unchecked Hide Extension. After I did that, every time I postscript it automatically saves both extensions. Not a big deal but it is annoying. I just want it to end with .ps like it used to. Any ideas on how to fix this?
Thanks!!

I have no idea but I am incredibly curious...why are you doing this?
Printing to postscript is a completely archaic workflow. Export to PDF
instead.
Bob
TKnudt <mailto:[email protected]>
Tuesday, January 15, 2013 6:12 PM
>
How do I print to a postscript file with InDesign CS6 without
both extensions, .indd.ps?
created by TKnudt <http://forums.adobe.com/people/TKnudt> in
/InDesign/ - View the full discussion
<http://forums.adobe.com/message/4996731#4996731

Printing with CS6 Beta on Epson 2880 ?

I'm having the same problem printing with CS6 Beta that I have with CS5 (but not with CS4): the colors are grayer than appear on my calibrated MacBook Pro screen. A difference with CS6 Beta is a redder red, but stil the same grayed out colors.
I've coordinated all the settings in CS, have an up to date printer driver, but the problem occurs regardless of the settings (ex. various printer profiles). I'm wasting a lot of ink and paper.
Hoped this would be fixed in CS6 Beta.
Any solutions?

If unchecking the scene-referred profiles box clears the display problem in Photoshop, you most likely have hit a known bug with defective monitor profiling packages building defective monitor profiles that affect Photoshop and After Effects — specifically, the defective profile is erroneously marked as "scene referred."
Version 4 ICC Profiles: If your are using v4 printing profiles, try Googling for more information...some symptoms of this bug are Photoshop prints a light cyan or blue in the page white areas. The Fix is to use Version 2 printer profiles.
there is another old known issue that has to do with trying to Hard Proof simulate press conditions (printing cyan in whites) but i am not sure what you are trying and i can't recall it right now
if those aren't it upload these screenshots of your workflow:
show full Photoshop window including zoom% and Docuent Profile in lower left corner

CS6 Printing with Epson ABW - Device Independent Profiles No Longer Permitted

With the change to the printing options in CS6, it's no longer possible to use device independent colour spaces for printing. This was a recommended practice when printing via Epson's ABW mode when not using a paper profile. What is the recommended practice with CS6? Is it to use Printer Manages Colors rather than Photoshop Manages Colors? If Printer Manages Colors is the proper approach, then is it recommended to convert the image file to a colour space encoded with a gamma of 2.2 (e.g. Adobe RGB or sRGB or Grey Gamma 2.2)?
Thanks.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/cups/error_log" from the file list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Crash with Indesign CS6 and Keyboard Maestro

Anyone else experiencing crashes when using Keyboard Maestro with Indesign CS6 on OSX Mavericks? (Latest update of all mentioned apps).
Indesign crashes when I try to copy certain items in Indesign, but it is not possible to narrow down which. Happends even when there are no macros installed in KBM. Therefore it seems like its the Keyboard Maestro Engine that causes the crashes.

I see then I believe Kglad's advice is on track with starting with updating your printer drivers. I have also moved this discussion over to the InDesign forum as the Users in this forum likely have additional suggestions.
Also if you can please turn off your e-mail signature if you want to respond via e-mail. Your responses are going to a public forum where the information is accessible by anyone. I have edited your previous response to remove the signature.

Problem with Bridge CS6 and MCXRedirector (OS X 10.9.5)

Good afternoon all, I have a very irritating issue with Bridge CS6 that I've pretty much given up on now, so I'm wondering if anyone out there can help me before I do.
The issue lies with Bridge CS6 running in a networked Mac environment, first, a little background: I am using OS X Server's Workgroup Manager facility for various restrictions and folder redirection. Our users had a nasty bug a little while ago that caused saved Photoshop files to end up in ~/Library/Caches/TemporaryItems instead of the actual network home location they selected to save in. While this was happening, a single entry was being used in the MCXRedirectory preference to redirect the entire of ~/Library/Caches/
This was resolved by changing that preference and branching it out a little more, so now the folders subject to redirection are as follows:
~/Library/Caches/Adobe
~/Library/Caches/Adobe Camera Raw
~/Library/Caches/Meta
~/Library/Application Support/Adobe
Doing this fixed the saving issue with Photoshop, but has in turn broken Bridge. When launched, Bridge immediately fails with the error "Adobe Bridge CS6 quit unexpectedly" and gives the three options to ignore, report or reopen.
Taking away the ~/Library/Caches/Adobe redirection allows Bridge to work as normal again, but then I'm back to square one with Photoshop files saving in TemporaryItems again.
Does anyone have any advice to remedy this annoying problem please?
Thanks in advance.
EDIT: Bridge version is 5.0.2.4

Sorry, did not solve the problem. The info given did not bear much relation to what I could see in the print drop down box. I have been through all settings I can access and every thing appears normal. The print preview in the print box appears normal and shows colour, but this does not translate to the actual print.
When printing a docuement of 3 pages or more using double sided the result is the first docuement page on one side of a sheet and the last page on the other side, but upside down, despite orientation set to long edge binding. All other pages between first and last are ignored.
When printing docuements originating from printer software such as Print Quality Diagnostic and Make The Most Of Your Printer, the printer performs correctly with good quality printing and colour.
I assume that the Mac update to 10.9.5 has corrupted something but I am not knowkedgeable enough to understand what. Any further assistance would be greatly appreciated.

Trouble with Photoshop Cs6

Having trouble with Photoshop cs6. Brushes that i have downloaded from 3rd party websites were deleted from Photoshop after months of use. We replaced all the brushes 1 by 1 but now there is an extreme lag in almost every function in photoshop that i had never experienced before. Dont know what is going wrong.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

i was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
I'm using the Design and Web Premium CS6 Suite on Windows Vista.
Thank you so much for your help.

I have a problem with indesign cs6 and my epson 3880 on mac

I have a problem with indesign cs6 and my epson 3880 on mac. I need an older version of indesign but do not have a serial number....any suggestions?

I see then I believe Kglad's advice is on track with starting with updating your printer drivers. I have also moved this discussion over to the InDesign forum as the Users in this forum likely have additional suggestions.
Also if you can please turn off your e-mail signature if you want to respond via e-mail. Your responses are going to a public forum where the information is accessible by anyone. I have edited your previous response to remove the signature.

CS5 color print problem using CS6

I upgraded from CS5 on XP to CS6 hosted on Windows 7, 64 bit. Images loaded into my new CS6 system from my camera or the web display and print perfectly. I am using the same printer for CS6 as I did for CS5, an Epson 3800. However, when I open and print older CS5 generated images using CS6, the images print with what appears to be reversed grey tones and off color but the monitor displayed colors appear just as good as they did on CS5. In summary, images generated in CS6 print ok, but images generated under my old CS5 system print with off colors using CS6 but display ok. Thanks for your suggestions and help.

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

New MacBook Pros not compatible with Adobe CS6

I am having constant crashes with inDesign cs6 on new MacBook Pro. Lost a lot of the functionality of my printer—NO LONGER DUPLEXES! That was the purpose of that printer. Anyone with similar experiences. Shame on Apple for not coordinating efforts with Adobe before release!!!

Shame on Adobe. Have you posted in their support forum?

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Z3100 printing with PS CS6 or PS CC

Similar Messages

Maybe you are looking for