Z3200 24" non PS printer leaveing feed tracks

I have a new (less than 2 months old) Z3200 that I am having an issue with. I print 1-5 24x30 prints a week and have yet to get a print that did not have feed track moarks on the prints. It is usually in the middle of the print. How can I get this to not leave feed marks on my prints?

This forum is aimed at consumer level products. For the Designjet Z3200 you may have better luck posting in the Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Is there a way to print from ipad 4 to a non AirPrint printer? I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer. Is there an app for this or adaptors which could work? thank, Ric

Is there a way to print from ipad 4 to a non AirPrint printer?
I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
Thank, Ric

Printopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
Canon Easy-PhotoPrint
Canon Mobile Printing
PIXMA Printing Solutions

Why can't I print from Illustrator a non-faded print. It always prints as if I wanted a proof or something.

Why can't I print from Illustrator a non-faded print. It always prints as if I wanted a proof or something.

YOu have not provided any system info, version info or details about your printer. This is not going anywhere beyond stating the obvious - your system is not color managed.
Mylenium

How can I print from ipad to non wireless printer?

How can I print from ipad to non wireless printer.
....been trying to save document to pc to print.... but cant find a way to do so.....?

Actually you can print to a non wireless printer if you have apps on the iPad and your computer that will do this and as long as you can set up a WiFi network or the iPad and the computer are already on the same network.
I Am running an old OSX version on my iMac at work (Tiger OSX 10.4.11) and I have an app on my iPad called Save2 pdf. I downloaded a helper app on the Mac called WePrint. I do not have WiFi at work, but I create a WiFi network using the Ethernet connection to the Mac that my iPad can also join. As long as I can send the file/text/document to the Save2pdf app, I can print it on my old HP LaserWriter1012 which is not a wireless printer. This uses the Mac as the print server and the WePrint app on the Mac sends the doecument to the printer.
It's not a very elegant solution, and it is a little convoluted, but it does work.

How can I print from my iPhone to a non AirPrint printer

How can I print from my iPhone to a non AirPrint printer? I was told by an Apple tech to do so via Airpot Express USB port. I already have a wired and wireless network and printers connected via Ethernet. I am just trying to print from my iPad and/or iPhone to my existing printers...if possible. I tried the airport express but that does not appear to do what I need. Any help or a definitive "no way" would be appreciated.

There are third-party apps that permit this. If on a MAC, get this:
http://www.ecamm.com/mac/printopia/
PC, get this:
http://itunes.apple.com/us/app/print-print-to-all-printers/id299423224?mt=8

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Is it possible to print from iPhone 4 on a non wireless printer via use of the USB data / charging cable

Is it possible to print from iPhone 4 on a non wireless printer via use of the USB data / charging cable.

No

Can you connect your iPad 2 to a non-wireless printer? can you buy a USB for it?

Please help me out! I was thinking of getting an iPad 2 for Christmas. Do you have to have a wireless printer? I don't have a wireless one so could i connect the iPad 2 to my non-wireless printer with a USB?
Thanks

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

UPS Maxicode in Adobe Forms - non-zebra printer

Hey guys,
I have a problem regarding printing an UPS Maxicode on a regular printer (HP Laserjet P3015) in Adobe Forms: It just won't print.
I'm using the "UPS Maxicode" object in the "barcode" library (LCD ES3, Version 10.4). After some research, I found this guide:
UPS maxicode on SAP Adobe forms - Contributor Corner - SCN Wiki
The scripting described there works great for printing the UPS Maxicode on a zebra printer - but the non-zebra printer scripting doesn't work for me.
There isn't much to find about this on google, so I hope you guys can help me. I experimented with printers, device types (i.e. PDF1) and such, but the result remains the same. What else can I try? Am I missing something?
Thanks for your time / help,
Chris

You can find some information about it in this document:
[http://www.tec-it.com/download/PDF/TBarCode6_SAPwin_Manual_EN.pdf]
See chapter 12, see also chapters: 6, 7, 8 and 11.
good luck

Print smarform to a non-default printer?

I am writing a print program to manually print a smartform.
Which means, no SAP output message is involved. No entry created in the table NAST.
I assigned the printer short name to the output_options-tddest. It only prints if the printer is same as the user default printer in the user profile.
Any one has experience on how to print a smartform to a non-default printer?
Thanks a lot.
Margaret Chen

Do not worry about this question. The cause is that I misspelled the export parameter.
Sorry.
Margaret Chen

Non-Domain Print server

Hello All,
We set up a non-domain print server for our SAP integration. We have several printers all being shared. When we go to add a printer on a workstation or terminal server through add a printer and choose network we can bring up list through typing in \\servername\.
When we use windows explorer it says we can not access. How can we allow them to browse printers through windows explorer? This will be done from domain and non domain accounts.
-File and printer sharing is on
-Windows firewall is off
- Guest account is on

Hi,
à
When we use windows explorer it says we can not access.
Would you please let me know complete message that you can get?
Please follow the path: Control Panel-> Network and Sharing Center-> Change advanced sharing settings.
Please also click ‘Turn on network discovery’ and monitor the result.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Connect a non-AirPrint printer to an extended Airport Express

I connect a WiFi-capable but non-AirPrint Epson printer to an Airport Express (2nd Gen) by USB, and the Airport Express is extending the WiFi network (5 GHz) of an AirPort Time Capsule.
How to config them to use AirPrint from my iPhone which said there was "No AirPrint Printers Found"?

You will need to install additional software on your Mac to possibly allow the iPhone to print to your non-AirPrint printer.
A popular choice is Printopia. There is a free trial period, so you will know if it will work before you buy.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

Install Non-postscript print on Solaris 10 x86

I tried to setup a print queue on solaris 10 x86 for a Brother HL-1230 non-postscript printer which attached to Linksys EPSX3 print server parallel port 1 (L1).
The network configuration as followed:
EPSX3: 192.168.2.250
Solaris box: 192.168.2.170
/etc/hosts:
192.168.2.170 neptune
192.168.2.250 epsx3
I used the printmgr to setup my print queue. In the destination field I typed epsx23:L1 and pick up the printer drive by model number using ppd file.
I'm able to use the print queue to print text file, eg. /etc/hosts.
However, I didn't get any ouput from web browser. When I print from the PDF viewer, it complained there is no supported postscript printer.
Did I do something wrong in the setup? When I used the lpstat -p command to see the print queue status, it return nothing. Is there anything wrong with the print server daemon?
Thanks.

Hi I have one more doubt, if you can help-me.
I set PATH like this:
#PATH=/usr/local/bin:$PATH; export PATH
and work, but if I restar the machine I need do set PATH again: #PATH=/usr/local/bin:$PATH; export PATH.
Have any way to save this?
And I have the same problem with:
#BOOST_ROOT=/xtras/boost_1_34_1
Thanks#

How do I set non standard print size with Epson SX515 and iMac

I have an Epson SX515w printer and can't find any software on Epson that lets me set non standard print sizes. From my PC Laptop I can print all Avery sizes as well as any size I want. I want to print images to fit into small square frames.

OS X Lion: Create a custom page size
http://support.apple.com/kb/PH3861
Mac OS X 10.6: Creating a custom page size
http://support.apple.com/kb/PH6406
OS X Lion: Page Setup dialog
http://support.apple.com/kb/PH4606
Mac OS X 10.6: Page Setup dialog
http://support.apple.com/kb/PH6693
OS X Lion: Set print options
http://support.apple.com/kb/PH4381

CC&B Payment receipt - Printing with a non-POS printer

Hello Experts,
We are facing 2 issues with the payment receipt functionality in CC&B :
- Our client want to print those receipt with a desktop printer (non POS). Is it possible to modify extend the printing option offered by CC&B ?
- We also want to modify the content/format of the receipt. Is it possible to modify it ?
I havn't found any content about those receipt modification and non-POS printer usage. Do you have any experience about it ?
Kind Regards
Antoine

I'm not sure if there is a standard way of doing this, but what you can do is to alter the print button to invoke a UI Map instead that will contain the dynamic values on what needs to be printed, the same JSP that invokes the UI Map will have to call the page print functionality of the browser.
You can also research on how to automate the print spooling process so you don't need to see the Print option pop up.
Hope this helps!

Z3200 24" non PS printer leaveing feed tracks

Similar Messages

Maybe you are looking for