Z50-70 touchpad is not working - Windows 10

 Hello. I installed Windows 10 to my Z50-70, and now my touchpad is not working. It worked like few hours.My USB mouse works fine. This laptop is new, I bought it 3 weeks ago.  What should I do?  Thank you!

Just found the same problem with my lenovo Z50. Touch pad completely non responsive. Under start menu, settings, devices, mouse & touchpad, additional mouse options, elan tab. The elan touchpad settings were completely grayed out and unavailable. So from there I went to the window search in the task bar and typed in "computer management " and opened the computer management desktop app. Under device manager selected mice and other pointing devices and then elan input device. In the elan properties window that opened I selected uninstall to uninstall the driver and in the next box that opened warning that the driver was about to be uninstalled  l checked the delete driver and then OK. Then restarted windows. In the process of restarting windows detected the elan touchpad as a new device and installed the driver in time for the login screen. So my elan touch pad is now working again. I am assuming that the driver had been corrupted in the upgrade from Windows 8.1 to 10. I hope that this information is of help to you. Should be a bit easier for you as you have an eternal usb mouse that works, I had to remember the old shortcuts keys from back in the day when the mouse was not that common.       

Similar Messages

  • Tecra M3 - touchpad is not working with Windows 7

    I have a Tecra M3 that I have updgraded to Windows 7. The touchpad is not working.
    The Toshiba website does not have Windows 7 drivers for this model. I have tried installing the touchpad driver and TVAP from the A11 model but still cannot get it to work.
    Can anybody help? The audio doesn't seem to be functioning either.

    Hi buddy,
    As Silas wrote, it could be a little bit problematic to find the correct drivers because it doesnt support Vista...
    You should try a touchpad driver from another model like Tecra M4. This should work.
    But Im wondering about this. Basic functions of touchpad should also work without special driver.
    Can you use the touchpad at the moment?

  • Touchpad is not working anymore after Windows Update

    Issue:
    After a Microsoft Windows update it may occur that the touchpad is not working anymore.
    Resolution:
    Press the shortcut function keys (typically F5 or Fn+F5) to enable the touchpad again. Please refer to the user manual of your notebook to find the correct key combination for enabling the touchpad.
    More Info: aps2.toshiba-tro.de/kb0/TSB5303QQ0002R01.htm

    Check the settings:
    Press FN+F9 or hotkey to turn on touchpad.
    If the problem persists then enter the BIOS and make sure BIOS is set to default.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • HP G62 touchpad scroll not working after Windows 10 update

    Hello, As many, I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10.  I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port.  Can you please provide information on how to fix? Best,  

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad. 
     1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

  • Touchpad scroll not working after Windows 10 update

    Can you help? I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10.  I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port.  Can you please provide information on how to fix?      

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad. 
     1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

  • Touchpad does not work even after format - x220t

    Hi there,
    I've had my X220 tablet for about 10 months and it has been great.  For the last month however, the touchpad and touchpoint have become flaky.  When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
    I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing.  I have also updated/reset the BIOS.
    I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating. 
    When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck.  The touchpoint/touchpad did not work even in Windows 8.
    I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that.  When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
    As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled.  I am not sure of this, but it is my belief now.
    Are there solutions out there for me?  I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
    thank you,
    steve

    xyster wrote: 
    When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck.  The touchpoint/touchpad did not work even in Windows 8.
    If you are ready to reinstall Windows, try this method:
    http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
    If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
    X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
    IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

  • GT70 keyboard and touchpad no longer working [Windows 7]

    I've had this machine for nearly a year without any problems, but yesterday my keyboard stopped working. No keys at all are registered in Windows when I type. The keyboard seems physically ok, however, since I am able to get into the BIOS setup menu and boot menu, etc. Just once Windows launches it stops working.
    Symptoms:
    - Keyboard will not work in Windows.
    - I've noticed that the touchpad does not work either.
    - I can enable/disable touchpad from S-Bar, and the physical enable/disable touchpad button's light will change, but the touchpad does not work.
    - An external mouse works correctly.
    - An external keyboard works correctly.
    - My machine boots up with Wi-Fi turned off now (that never happened before). I am able to turn it on via S-Bar.
    What I've tried:
    - Shutting down, removing battery and power cord, and waiting an hour (to reset EC controller? (read that somewhere) )
    - Uninstalling the "PS/2 Keyboard" entry from Device Manager.
    - Rebooting many times.
    - Booting into Safe Mode (keyboard does not work even in Safe Mode)

    I haven't installed anything recently, but I did just discover that the keyboard (but not the touchpad) will work after waking the machine from sleep. I usually put the machine to sleep when I'm through with it instead of restarting it, so it could have been something I installed a while ago.
    I have done multiple virus scans, both with Norton and Malwarebytes, so I don't think it's malware.
    I just can't figure out what kind of software could make something as basic as a keyboard stop working.

  • Touchpad Buttons Not Working

    I purchased this Toshiba Satellite C55D-B5102 last week, I installed Windows 10 last night.  After installing Windows 10 the touchpad did not work.  I have since fixed that issue.  However, now the buttons for the touchpad are not working and I'm unable to find a solution to this issue. I am able to use a wireless mouse for functionality, so that helps, however, this is a very hindersome problem...  Any guidance would be much appreciated.

    Hi I´m not sure if this gives any guide but this what I have done to "Win 10 + touchpad problems". I have a Satellite P30 W-B which is brand new. I installed Win 10 yeasterday and my Touchpad didnt work any good after that, I only had the cursor function and a click function working, no right click or so. I checkad all possible solutions here and there and what I finally did was to uninstall the ELAN tocuhpad driver and a ree-start. I thought the touchpad would be dead after that but it works fine! Now its a MS softwere instead automaticly, quite old. Now it works like before. THe ELAN driver came with he Win 10 package. I might have lost some functions incoperated in the ELAN driver like scroll or so but I wont install any new driver unless its working properly with Win 10 so I can wait for that. I hope this can be something for the moment.

  • My touchpad is not working anymore after using usb mouse for a while

    I have been using usb mouse for a couple days now I only can use usb mouse because my touchpad is not working. its like it is disabled or something.
    I have asus k55v (windows 8.1)
    pleasseeee help !!!!

    Check the settings:
    Press FN+F9 or hotkey to turn on touchpad.
    If the problem persists then enter the BIOS and make sure BIOS is set to default.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Touchpad is not working properly on Satellite L30-X10

    Hi to all of you.
    I've got the following issue: On my notebook the scroll on the touchpad is not working. If somebody can tell me how to fix this problem it would be kindly appreciated.

    Hi,
    I am not sure if this can be a good solution but maybe its worth to try it:
    1. Download the latest touchpad software from here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    2. Remove the old software
    3. Reinstall the downloaded software
    4. Go into your mouse properties and check if everything is configured (especially the scroll function)
    Give some feedback in case of further questions..
    Cheers

  • The click at touchpad is not working, please help!!!

    I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!

    For this issue AppleCare support told me to so a SMC reset as follows:
    Power the machine OFF.
    At the SAME TIME hold down the following buttons:
    Shift
    Control
    Option
    Power
    Then release all buttons.  Power up the Macbook and see if the trackpad button work.
    Hope this helps.
    Bill

  • Autofill function is not working, 'window' sticks through it not functional!

    autofill function is not working, 'window' sticks through it not functional!

    Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
    1. Quit and relaunch Safari.
    2. Select your card in Contacts. Then select
    Card ▹ Make This My Card
    from the menu bar. Also select
    Contacts ▹ Preferences ▹ vCard
    and uncheck the box marked
    Enable private me card
    if it's checked.
    3. In Safari, select
    Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
    If the box was already checked, uncheck it and then check it again.
    4. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

    This topic has been moved to Operating Systems.
    MSI Live Update not working Windows XP Professional 64bit Edition!!!

    Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
    A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
    Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
    http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
    Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

  • ThinkPad internal microphone not working - Windows 8.1

    Hello everyone,
    I'm back on this forum because I had another issue... See my first one : http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440p-camera-not-working-windows-8-1/m-p/18...
    There was a problem with the cable between the camera/microphone combo card and the daughter card. Now the camera is working properly. A technician replaced the cable.
    But I realized that my internal microphone is not working. I don't remember if it worked once...
    My microphone is not muted, and I reinstalled the real-teck drivers. When I try to use the "listen" option in the microphone properties, I here a sort of wideband noise (let's call it white noise).
    Do you have any suggestions that might help?
    Thank you very much
     Moderator edit: Correct version of Windows in thread subject

    Anyone ? Thank you !
    EDIT :  sorry I'm on Windows 8.1 not 7

  • Re: Satellite L500D - Touchpad "touch" not working

    Hi everyone,
    my touchpad's touch function (to emulate left-clik by tapping the touchpad) is not working any more. I can move the mouse with the pad.
    Also the left button below the pad is not working - the right one is.
    I've already tried :
    -Updating the driver
    -Fn+F9
    -The touchpad settings - the "touch" function is enabled
    -The Toshiba hardware test - passed
    but with no success.
    Not sure whether it's a software issue or a hardware one.
    Any suggestions?
    Thank,
    Andres

    Hi
    As far as I know the option is called Tap to Click
    You should check if this enabled in the touchpad settings.
    >Also the left button below the pad is not working - the right one is.
    Maybe this has something to do with the fact that the left click by taping is not working
    Its hard to say what could cause this
    As I said; the options should be checked once again in control panel -> mouse -> device settings -> settings (or properties)
    If all the settings would be ok, then a touchpad hardware issue might be possible

Maybe you are looking for