Z60m card reader not detecting cards

Hi,
I had my z60m formatted recently and since then the card reader does not detect cards. On searching online I found a ricoh card reader driver which claims to work for the z60m which I have now installed. Still no luck. The green light next to the card reader blinks when I put a card in which could mean the hardware works.
Hope someone can help me.
Thanks
Riaz

hi
drivers for card reader for z61m - win7 :
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
they are HP  but working just fine (mass controller question mark in DM)

Similar Messages

  • Fingerprint Reader Not Detected

     1. Product Name and Number
        Compaq CQ45-207TU
     2. Operating System installed (if applicable) 
         Windows 7 64 bit
     3. Error message (if any) 
         FingerPrint Reader Not detected
     4. Any changes made to your system before the issue occurred
        Reinstalled OS and formatted HDD

    There you go, I am  facing the same problem, my finger print reader is not recognized, attached below is my screen shot of my device manager where i installed my drivers for this finger print reader.
    Spoiler 
    attached is the second image of the software used by finger print reader in my lap top, showing the error message. "Finger print reader is not recognized"
    My model number is: Hp pavilion DV 6907 TX
    The model was initially with the Operating system - Vista, my finger print reader all worked fine, then i later upgraded to windows 7, where i was successful in finding all drivers for my lap top. I was successful in finding the drivers for my finger print reader as well, and i installed it, that's the reason it shows in the device manager, but i don't know the reason why it is not getting detected.
    Is this something to do with the hardware failure to get detected by the drivers ? or an incorrect driver inside my laptop which is not gelling with the hardware ( the driver is not getting digitally signed). please help.

  • Fingerprint reader not detected in HPDV6-2165TX

    hey guys,
    i have got HP pavilion DV6- 2165 TX i upgraded my lappy to WIN 7 - 64 BIT ultimate...so now the thing is that my finger print is not working / it is showing reader not detected. ...can any one help...me thankx in advance...

    Have you install Validity Fingerprint Sensor Driver? Here is link to it just incase ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45021.exe
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Finger Reader Not Detected

    The finger reader gives an error message "Reader not detected"   Any suggestions,  Thanks

    Hello Wygalro,
    I understand your fingerprint reader isn't working correctly.
    In order for me to better assist you could you please provide the full make and model of the PC you have.  Providing me that information will better help me help you.
    Please respond at your earliest convenience.
    Thanks. 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Fingerprin​t reader not detected

    I have a HP pavilion dv6 1152tx laptop.
    I have upgraded the system form pre-installed vista to win7 and installed the driver for fingerprint reader that came with the upgrade disk but it says reader not detected.
    I also tried installing the driver provided on hp support site but no success.
    Can anybody tell me what to do?
    any other link for driver of Digital Persona fingerprint reader?

    I have the same issue. Anybody have a solution?

  • Fingerprint Reader Not Detected during startup on Windows 7

    Dear Community Users/Tech Guru,
    I am hoping somebody could shed light into a weired issue I am facing with this *stupid* Microsoft OS. I purchased a T400 last year and brought a x64 bit Windows 7 three months ago and have it setup for clean installation. I followed the procedure published in lenovo.
    I had the security setup of my notebook to use pre-desktop authentication and single sign-on. I had everything setup and running.
    However, after a few weeks I began to noticed that upon power up and giving a fingerprint swipe on the bios authentication, it would halt on the windows startup page (where we would normally login). It turns out that the fingerprint device is not detected! Something is not workin properly during the startup of bill gates Microsoft Windows 7! I would try a reboot on the system and it will load properly afterwards.
    But I find it stupid that Windows doesn't detect my fingerprint device on startup! This happens when it's a cold boot using a battery (at least 70% of the time it turns out that way). I disabled  the single sign-on but retained the desktop authentication (means I have to swipe twice). But this f*ck OS is still not detecting it during cold start.
    Anyone... please advice?
    Solved!
    Go to Solution.

    I attempted to reset the policy settings of CSS but then the pop up screen just got stuck:
    - I did a reboot and reset the fingerprint data and password (after exporting the 
      settings),
    - uninstalled the fingerprint reader and CSS
    - uninstalled the CSS. I had encountered some issues while uninstalling it
      Windows is reporting that the installation log file could not be found. I manually
      downloaded the driver from the site and used the installer to remove it from my PC
    - Reinstalled both CSS and Fingerprint driver
    - Import all my security settings (password and fingerprint)
    - Tested CSS and used fingerprint as default login method in battery mode
    - Enabled Single SignIn method in CSS and BIOS
    So far so good, the reinstallation fixed the issue. I did recall that there was a windows update before this mayhem on the fingerprint reader started.

  • Tx2510us - Fingerprint Reader Not Detected after Service Pack 1 for Windows 7 installed

    Have had Windows 7 32-Bit installed and running fine since early last year..   Today Windows Update installed Service Pack 1.
    Now, the fingerprint reader (AuthenTec AES1610) is not detected.   Digital Persona reported the fingerprint reader isn't connected and the Device Manager shows installed and working properly..   When the computer boots, the logon screen shows not detected..
    Have seen several older posts that reference a page with a fix for AuthenTec/Digital Persona, but get a 403 error when trying to access..
    Hoping someone still has this info, or possibly there's a new fix to work with Service Pack 1..
    Thanks
    ~~~~ Nothings forgotten. Nothing is ever forgotten. ~~~~

    Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
    I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
    Have again performed a roll back in order to remove SP1, now Firefox works again.
    If somebody has advice it would be very welcome!

  • Plz Help, Fingerprint reader not detected

    Hello dear member,
    I,m a happy owner of HP Probook 4530s. But from past 4 days my Nightmare starts. I Accidently restore my bios to default factory reset. After that HP protect tools could not detect my fingerprint reader. I had tried every thing. i had searched this forum. Try every thing to make it works Properly but the problem still exists. nd one more thing accidently i had formatted the hp recovery partition . Now Please help me i,m so much disturb because of it now

    Uninstall current Validity fingerpint sensor driver and HP ProtectTools Security Manager. Resource:
    Uninstalling Software in Windows 7Uninstall or change a program in Windows 7 Download and install older version of Validity Fingerprint Driver from here and then HP ProtectTools Security Manager from here.

  • Fingerprint reader not detected - tx2525nr

    I have an HP tx2525nr and recently did a clean install of Windows 7 (x64) and updated all of the drivers. When I try to enroll my fingerprints into the DigitalPersona program, it says the fingerprint scanner is not detected. It used to work when had Vista (x64) on my computer, so it shouldn't be a hardware issue. I have tried installing the driver used for Vista and that did not work either.

    Hi,
    Check below guide:
    DigitalPersona, AuthenTec fingerprint and Windows 7
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Why does my macbook pro's built-in card reader not detect my SD card?

    I have a Macbook Pro 15-inch Retina (Late 2013) and it has a built-in card reader. My SD card was working perfectly with the reader some days back, however, now it has all of a sudden stopped working! The funny thing is that when I put the same SD card into an external card reader connected to the same macbook, it works perfectly. Also, strangely, my card reader still works perfectly well with another SD card I have.
    So, both the card reader and the SD card appear to be working separately, but why are they not working together?

    two things to try
    1. Reset SMC data. Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    2. Do not push the card(s) all the way into the slot . back it out a fraction 1/16-1/8 inch until it appears in finder/desktop/etc...

  • Acrobat Reader not detected

    Hi
    I have enrolled in the Microsoft IT academy, and was able to complete the work, when one day the check at the beginning no longer detected acrobat reader plugin.  i updated and reinstalled acrobat reader, but it is still not picking up the plugin.  how do i fix this?
    thanks

    Interesting, thank you. Just a mistake, I think, or a very old site. It stopped being called Acrobat Reader almost 10 years ago.
    My advice is to test that Adobe Reader is able to show a PDF in your browser window (NOT in the Adobe Reader window). Here's a link to try: http://www.adobe.com/products/postscript/pdfs/PackingLightBrochure.pdf
    What happens?

  • HP Probook 4540s Fingerprint reader not detecting fingerprints in windows 8.1

    I install the drivers form Valitdy that enables WBF so I can use the sensor in windows 8.1 from here 
    http://www.validityinc.com/software/hp/wbf.php
    It detects the fingerprint sensor and alows me to start registering my fingerprints but when i move my finger over it nothing happens.  

    Hello bbroecker37
    Thanks for posting on the HP Forums!
    I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
    Have a wonderful day!
    Mario
    I worked on behalf of HP.

  • Token and smart card reader are not detected on Mavericks if not plugged on a USB port during system boot

    Well, both token and smart card reader are not detected on OS X 10.9 if not plugged on a USB port during system boot. So, if I am already working within the system and need to use my certificates I have to plug the token or smart card reader on a USB port and restart Mavericks.
    Token is a GD Starsign and Smart Card Reader is a SCR3310 v2.
    Thoughts?

    SCS is a very good app, since I've read that Apple has discontinued support for PC/SC interfaces after the release of Mountain Lion.
    (My previous installation was a Mavericks upgrade from Lion)
    However, I don't know what and how to debug using Smart Card Services. Do you know any commands to use?
    Apparently, the SC reader reports no issues: the LED is blinking blue when no smart card is present and becomes fixed blue when a smart card is inserted – according to the manuals, this shows that there is correct communication between the OS and the CCID reader.
    I don't know what to do; I'm beginning to hypothesize it's a digital signer issue. In fact, my smart card only supports one application called File Protector (by Actalis) to officially sign digital documents. This application seems to have major difficulties in identifying the miniLector EVO.
    The generic and ambiguous internal error comes when I try to manually identify the peripheral.
    Athena CNS is one of the Italian smart cards and is automatically recognized and configured (so it's correct – no doubts about this), while "ACS ACR 38U-CCID 00 00" seems to be the real name of the miniLector.
    (I'm assuming this because System Information also returns that the real manufacturer is ACS... bit4id is a re-brander)
    However, when I click on it and then tap OK, it returns internal error.
    As first attempt, I would try to completely erase&clean File Protector files to try a reinstall. Then, if this still doesn't work, I'd debug using the terminal.
    So:
    - Do you know any applications to 100% clean files created by an installer?
    - Do you have in mind any solutions that I might have forgotten?
    Thanks in advance from an OS X fan!

  • HP DV5t 5-in-1 card reader does not detect my SD card

    The 5-in-1 card reader slot of my HP dv5t was working fine until yesterday, and reading my Canon SD card perfectly. However, today upon inserting the card, the card reader is not detecting the SD card. The card doesn't even show up in my device manager. My SD card has no issues since it works perfectly fine on other laptops (I even tried it on another dv5t and it worked). My guess is that there is something wrong with the hardware, since the card doesn't get recognized by the reader even when I use it on Ubuntu. Can anyone please suggest any solution?
    I tried contacting hp customer care and after an excrutiating wait of 1 hour or so I had to hang up - out of boredom. My laptop is under warranty but I am really pissed off with hp, I think hp laptops have some of the worst hardware. Also, it takes ages until you can speak to a customer care executive. Can someone please help me? If hp were to give me 70-80% of my money back I would happily swap hp for a T61 or even a Dell!
    Message Edited by ttotade on 12-06-2008 02:34 PM

    I'm having the same exact problem on my dv5z.  I even tried downloading and reinstalling the drivers, but it appears to be a hardware issue.  I had a similar problem with my wireless card early on and I think it may be a build quality problem.  Any suggestions other than dealing with sending the unit in for repair?

  • DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

    I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
    Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
    I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
    When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0005h (I/O Access, BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h Unknown
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 0000A800h
    System IRQ 5, INT# A
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
    Vendor 02h Creative Labs
    Device 0002h EMU0K Audio Chipset (SB Li've!)
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 04h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 002002h CT4850 SBLi've! Value
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00009000h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 7002h PCI Gameport Joystick
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 0h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Input, type Other
    Subsystem ID 002002h PCI Gameport Joystick
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008800h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008400h
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    (Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
    So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
    I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
    I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
    Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
    Cheers,
    Russ.

    Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
    The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
    Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Maybe you are looking for