Z61m - Card Reader

I installed Windows 7 and my card reader is not detecting memory cards when I insert them. Please help!!

Hi robbyrutz,
Welcome to the forum!
You need to install driver for the card reader, Vista driver will work under Win 7:- http://www-307.ibm.com/pc/support/site.wss/MIGR-64278.html#card
Subsequently install this for SDHC support:- ftp://ftp.hp.com/pub/softpaq/sp35001-35500/sp35308.exe
See following thread if you feel confused:- http://forum.thinkpads.com/viewtopic.php?p=541326#p541326
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Similar Messages

Cannot access card reader Z61t in Windows 7

hello all,
I just recently installed Windows 7 Enterprise, all the driver were installed, but I still can't access my card reader
anyone can help?

Hi dezig,
Welcome to the forum!
Have a look at this thread:- http://forums.lenovo.com/t5/Z-Series-ThinkPad-Laptops/Z61m-Card-Reader/td-p/200967
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Z60m card reader not detecting cards

Hi,
I had my z60m formatted recently and since then the card reader does not detect cards. On searching online I found a ricoh card reader driver which claims to work for the z60m which I have now installed. Still no luck. The green light next to the card reader blinks when I put a card in which could mean the hardware works.
Hope someone can help me.
Thanks
Riaz

hi
drivers for card reader for z61m - win7 :
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
they are HP but working just fine (mass controller question mark in DM)

CS2 won't open files from card reader

Suddenly CS2 on my eMac will not open files imported from CF card reader. I have tried two different card readers and three different CF cards with the same result:
"Could not complete your request because of on unknown or invalid JPEG marker type is found."
Tried to open JPEG's and Raw files with same error message.
Elements 4.0 gives same message. Bridge will display icon only (JPEG or NEF) but will not display image. Both CS2 and Elements 4.0 will open old stored files without problem.
Replaced the Adobe/Unit Types file, but no help. There is no CD/DVD in the drive.
The images on the CF cards are not damaged. I know this since they will open in CS2/Elements on my lap top (Mac Book).
The files will open in Preview if I try Preview first. However, if I try to open them in Photoshop first and then in Preview, I get an error message from Preview also.
What have I done now?!?
TJ

>
"It's a eMac 17 inch with 1.7 Ghz."
There were no eMacs made with 1.7GHz processors.
That may seem like I'm just being picky for the heck of it, but when it comes to computing and troubleshooting and asking questions, the details
matter
. In this case, probably not so much. But being sloppy about details is a bad habit to get into.

How much would it be to get the sim card reader fixed

i would like to know how much the new sim card reader is.

$7Billion dollars.
Or simply clarify the issue the device is actually having.
Apple does not repair devices, they offer Out of Warranty replacements for $199 (4S) or $149 (older models) in the US.

Flex 14 SD card reader not working with larger cards on Windows 8.1

The card reader in my Flex 14 is behaving very oddly. When I insert a 16GB SDHC card it makes the 'USB inserted' noise and the card shows up under device manager but I can't access it through file explorer. The card reader works fine with smaller SD cards that I have. I tried the card in another, Win7 laptop and it worked fine.
I see a number of other people are having a similar problem and I have followed all of the troubleshooting advice I can find, but nothing is working. Does anyone have any other suggestions?
This is what I have tried:
1. Leaving the card in the camera and attaching the camera via USB cable to the laptop: same result, noise, but can't access the card.
2. Trying to reassign the drive letter through storage controller: it shows the card but if you right click it to assign it a drive letter it says the 'file is missing'.
3. Downloaded the Win8.1 x64 driver from Lenovo website and installed. This stopped the card being recognised at all.
4. Installed the Win8 xc4 driver: this got me back to the noise but no action stage.
5. Updated Windows.
6. Uninstalled and reinstalled the driver numerous times both with the card inserted and without it and with restarting the computer after unistall and after reinstall.
7. Ran Ubunutu from a live USB: This allowed me to see the card and copy its contents to the laptop's HDD.
So it seems to be some incompatibility between the Lenovo drivers and Win8.1. Potentially it's to do with the USB drivers rather than the card reader drivers as the result when using the USB cable and the camera was the same as putting the card in the card reader. Is there a way to update these?
Any other troubleshooting steps I could take?
Thanks.

What size are the cards?
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Media Card Reader does not work on W541 (is O2Micro, not the RealTek)

Can not read an SD card on my W541. It reads fine on a W530. Reviewed the ReadMe, and tried to find the driver in the WIndows "Device Manager" but no luck.Experimented and found that if I did the following:Brought up Device ManagerUnder "View" menu, chose "Devices by Type" (this should really be in the instructions, although perhaps not necessary).Under "Action" menu, chose "Scan for hardware changes"found that the node labelled "Storage Controller" finally appeared (towards the bottom, just above "Storage Volumes") There was one entry under the node, that of "ByHubTech/O2Micr Integrated MMC/SD controller". The icon preceding this entry had a yellow triangle, so at least the system detected something was wrong. Right clicked on the entry and chose "Properties" and resulting dialog had the following text in the "Device Status" area (on the "General" tab): This device cannot find enough free resources that it can use.
(Code 12)
If you want to use this device, you will need to disable one of the other devices on this system. I have no idea what "resources" are being referred to in the message (a case of "I've got a secret"?), so it is a little hard for me to understand what other devices I might want to free up. Bios is version 2.20The "BayHubTEch/O2Micro Integrated MMC/SD controller" driver version is 2.2.2.1057 (which is the latest as of 6/26/2015).Runnin Win 7 Enterprise + SP1, 32GB RAM.

Hello,
I don't have a W541 myself, but here are a few things to check, in no particular order:
Have you checked with your IT department? Maybe they set a poilicy to disable the card reader.
Is the card reader correctly enabled in the UEFI firmware?
Have you run ThinkVantage System Update and Microsoft Update to confirm all of the various Lenovo and Microsoft updates are installed?
Do you still have the OS image the device originally shipped with? If so, does the card reader work under that?
Regards,
Aryeh Goretsky

Why does my card reader not work on my iPad since upgrade?

I use my iPad mini to download photos from my camera when I'm on the road. In the summer I bought the "3 in 1 Card Reader Adapter Cable Camera Connection Kit, 3 Port Card Reader for iPad 4 and iPad Mini by Eurekka" and it worked wonderfully. I was able to download photos (jpg and RAW) directly to the iPad and off the camera, and once home it was a flawless upload to my iMac.
However, once I upgraded to iOS 7 last week I get a message saying the device is not supported. What gives? Will this be fixed or will Apple products only accept Apple accessories from now on?

No but I was just trying to find a way in to your help desk. I didn't find
your web page very helpful in this regard.
Douglas Whiteley
In a message dated 10/05/2012 20:43:50 GMT Daylight Time, [email protected]
writes:
Re: why does my adobe reader not work
created by Claudio González
(http://forums.adobe.com/people/Claudio+González) in Adobe Reader - View the full discussion
(http://forums.adobe.com/message/4395059#4395059)

SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

Since updating to OSX Mavericks (10.9) My USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
My USB 2.0 card reader saved my life this time. It works totally fine.
Is this a known problem? Are you guys working on it?

Solved in this post here:
https://discussions.apple.com/message/24016337#24016337

Tecra 9000: SD card reader will not work with XP

I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]

Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day

Camera connective kit does not work with card reader

Can I only use my USB camer connective kit with my camera and not a card reader?

Which card reader? Are you using an SD card in it or some other form factor?
As long as you're targeting an SD card with photos or movies, it should work same as connecting to a camera....but in that case, there is really no need since the camera kit includes an SD reader.

I just bought a Quantaray All-in-one card reader. It does not work with my Macbook OSX.

I just bought a Quantaray All-in-one card reader. My Macbook OSX does not seem to read it. I have tried attaching it with iphoto on both before and after attaching the card reader to the computer and also have tried another card. Directions say that a green light should come on to prove that connection has been made; I only get a red light. I am Europe with no help and am desperate. Can anyone out there please help? Thanks.

There is no way to use the Thunderbolt display with a computer that has no Thunderbolt port.
Swap the display for the Mini DisplayPort version
<http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-(27%22-flat -panel)>
The price is the same.

HP Envy Touchsmart 15-J104sa Memory Card Reader not working

I took delivery of an HP Envy Touchsmart 15-J104sa running Windows 8.1 this week and the internal memory card reader isn't working. It doesn't recognise any SD cards (I've tried more than one) and continues as if nothing has been inserted; showing no error messages. All of the cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver update software (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) every time an SD card is inserted; this must be done with the card in the reader. If the software is run and then the card is inserted nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it isn't recognised and the process has to be restarted and the driver reinstalled even though nothing has changed.
Can somebody please help me with this issue or I will have to return the laptop to HP. I do a lot of photography so being able to read an SD card quickly and reliably is extremely important for me; it's not a problem I expected from a brand new laptop straight out of the box.
Thank you all.
This question was solved.
View Solution.

Unfortunately non of the driver updates solved the problem but a BIOS update through the HP Support application seems to have remedied the issue. Whilst I appreciate there were no specific drivers available I find it hard to accept that HP should be able to release a model where they know the hardware will not be fully supported by the OS and in this case not function.

I have a Mac Mini, and it won't accept connecting my Sony video camera. So I got a SD mem card reader to unload my movies from. It worked the first time I used it a few months ago. This time it says it doesn't recognize the format I am trying to use?

I have all thenecessary updates. I have switched over from a PC to Mac back in April and have nad nothing but problems adapting. I don't know why this worked the first time, and put my videos inti imovie, and now it doesn't recognize it at all. And the Mem card reader does work, because I just put the SD card from my regular camera into it and it downloaded those fine, it just won't take my movies!

Which sony camera? I have a Sony HDR-CX550 right now and have been able to use the SD card as well as connect the camera directly. I also had CX110 that work too. You may want to try to copy the complete top level folder from the SD card to the Hard drive, then try to "import from Camera archive" and select that folder.

USB memory card reader not working since latest security update

Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
Sorry!

Z61m - Card Reader

Similar Messages

Maybe you are looking for