Z61t SD card reader not working?

z61t SD card reader not working?
Tried the Vista driver and still not working.
Same for camera.
I am running Windows 7 64bit and using TVSU v4.0 as well as manual attempts to update.

I am running windows 7 home 32 bit and can not get the sd card reader driver to load either. Any help?

Similar Messages

In my macbook pro hdmi, usb & SD card reader not working

In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,

Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

Pavilion dv6 sd card reader not working

I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
rv9a
This question was solved.
View Solution.

Good morning rv9a.
Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue. Here is the link for Windows 7 and here is the link for Windows 8.
Another possibility is the the Plug and Play service is deactivated. Try the following to check.
Press the Windows+R keyboard shortcut.
Type "services.msc" into the box and click okay.
Scroll down until you find "Plug and Play" in the list.
Ensure that it is started. If it is not right-click on the service and select Start or Enable.
I'll keep an eye out for your response; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Card reader not working out the box scr 3500?

cac card reader not working out of box scr3500 help

Welcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel

Why does my card reader not work on my iPad since upgrade?

I use my iPad mini to download photos from my camera when I'm on the road. In the summer I bought the "3 in 1 Card Reader Adapter Cable Camera Connection Kit, 3 Port Card Reader for iPad 4 and iPad Mini by Eurekka" and it worked wonderfully. I was able to download photos (jpg and RAW) directly to the iPad and off the camera, and once home it was a flawless upload to my iMac.
However, once I upgraded to iOS 7 last week I get a message saying the device is not supported. What gives? Will this be fixed or will Apple products only accept Apple accessories from now on?

No but I was just trying to find a way in to your help desk. I didn't find
your web page very helpful in this regard.
Douglas Whiteley
In a message dated 10/05/2012 20:43:50 GMT Daylight Time, [email protected]
writes:
Re: why does my adobe reader not work
created by Claudio González
(http://forums.adobe.com/people/Claudio+González) in Adobe Reader - View the full discussion
(http://forums.adobe.com/message/4395059#4395059)

T430s SDHC card reader not working

Hi, I recently bought a T430s and when I tried to insert a SD card it did not show up in my computer. I've tried 3 different SD cards the sizes are16 gb, 32 gb and 2 gb and neither of them shows up, to make sure the problem is not in the SD card I tried using the SD cards in 2 cameras and 2 other laptops. In all those devices the cards works.
I have tried installing these drivers from this thread https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/New-T430s-4-in-1-express-card-SD-reader-mi... but it did not work.
I also tried following the instructions in this thread http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-card-reader-cannot-read-16-GB-SDHC-ca... but that did not help either.
According to the device manager the Ricoh PCIe SDXC/MMC Host Controller is working correctly. The Ricoh SD Disk Device is also working correctly.
Whenever I insert the SD card the Sound for a new device plays and when i remove the SD card the removal sound plays. How can I fix this? I'm going away for 7 weeks with my laptop so I need to fix it ASAP and I dont have time to send the laptop to Lenovo.
EDIT:
I uninstalled Ricoh Media driver and now 1 of the cards show up but Windows complains about that it needs to be formatted, but the size is 0 so that doesn't work either. Tried installing the driver again and now they show up in the device manager again and proudly says that they are working but the SD card still doesn't show up so I can read the files on it.
EDIT 2:
If I go into the device manager and forcibly update the the Ricoh SD Disk Device then it says:
Disc: Disc 1
Type: Removable
Status: Online
Partitiontype: MBR (Master Boot Record)
Capacity: 15807 MB
Non-allocated space: 0 MB
Allocated space: 0 MB
For the 32 gb SD card everything is the same but instead it says "Capacity: 30828 MB".
EDIT 3:
When the SD card is inserted a storage device pops up in the device manager. The name of the device is just "Unknown device" and the status is that it can't find any installed drivers for the device.

I'm experiencing a similar situation with my 1-year old T430s. The built-in card reader was working fine until recently when it stopped working.
Now the built-in SD card reader doesn't recognize SD cards that are recognized in external USB adapters.
Device Manager shows Ricoh PCIe SDXC/MMC Controller when an SD card is inserted into the card reader but neither Windows Computer Management/Disk Management nor Windows Explorer show the drive. Device Manager indicates that the driver is up-to-date (v6.10.10.32 25May11.)
When I put the same SD cards into an external USB adapter they're recognized by Windows, assigned a drive letter and visible to Windows Explorer as well as other applications.
Do I have a defective card reader?
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

SD card reader not working in Satellite A305 series

I have an A305 series laptop. It's only 6 weeks old and I bought it brand new.
The sd card reader has worked fine up until today.
It's not working anymore. Device manager shows it's disabled.
I tried to enable it but it says Windows can't enable it. I tried uninstalling and rebooting.
The computer found the device and reinstalled it but it's still disabled and won't work.
Any ideas what might be wrong? It's running Vista by the way.
Thanks!
Amanda

The only download shown under SD is Toshiba SD Memory Utilities. Would that be it?
I called Toshiba and they said it's a software problem and it is covered by the warranty. The lady told me to do a system restore and restore it to a point when the card reader was working. I tried that and guess what?
It won't restore. It says something is wrong with my files and it can't restore. That's probably not a good thing right? She said to call back if that didn't work but my 2 year old daughter isn't cooperating so I'll have to call back at nap time.

Broadcom USB Smart Card reader not working

After upgrading my Vista Business SP2 (32-bit) to Windows 7 Ultimate RC (32-bit) my Broadcom USB smart card reader does not work any longer (Dell Latitude E6400 with built in smart card reader).
The newest available driver from dell support was already tested (Broadcom, driver date 09/23/2008, version 1.0.0.1, digitally signed WHQL, released by dell in March 09), but the device can not start (Error code 10) with Windows 7.
With the Microsoft WUDF Driver (Usbccid, driver date 06/21/2006, version 6.1.7100.0) the device starts but whenever I insert my smart card an additional device is detected (other device - smart card) but no driver found - Error message is: The drivers for this device are not installed. (Code 28).
What else can I try to get this reader working again (with vista sp2 the smart card reader was working fine with the broadcom driver)?

I have also an USB card reader that works fine on XP PCs but Win7 does not recognise it, can msft make a sd reader driver that works pls.
Hi
Sorry, but the way the industry works is that Microsoft develops Windows and Hardware manufacturers develop drivers for their products. Microsoft does maintain a complete division (MSDN) that is dedicated to assisting hardware and software manufacturers in developing their products for compatibility with Windows.
All of the drivers that are contained on the Windows installation disk and on Windows Update are placed there by the manufacturers of the devices. This is a service that Microsoft provides to help these manufacturers to distribute their drivers.
What you can do.
1. Check with the computer manufacturer for updated drivers for that device. This is your best source, since the computer manufacturer builds, tests, and sometimes develops their own, custom drivers to work with the hardware on their PCs.
2. Try to determine the name and manufacturer of the device using Device Manager and MSInfo32. Once this information is found, try to find that manufacturers website and look for the latest compatible drivers.
3. Check to see if there are any users forums on the PC manufacturers or device manufacturers websites. Ask there about any known issues with this particular hardware device or if the device is no longer supported.
4. If the drivers are found but are only available for previous versions of Windows, install the drivers using the Windows Compatibility Mode. HOW TO: Install a Hardware Device Driver using Compatibility Mode
Right now, we are in a unique situation since we are using an operating system that is still in the pre-release phase. Many hardware/software manufacturers will be ofrficially supporting their products for Windows 7 until after the General Availability date of October 22, 2009.
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

Card reader not working on Mega 865 Pro

Samsung SpinPoint 250GB SATA II Hard Drive SP2004C
1GB Kingston Hyperx 512 DDR400 PC3200 CL3
Intel Pentium 4 630 3 Ghz Socket 775 800Mhz 2mb
LG GSA4163B 16X DVD Dual Layer R/RW/RAM
Windows XP SP2
Now The 7 in 1 card reader does not work! I am used to installing new hardware. There is no entry in the Device Manager for a card reader. I have tried an SD card and a CF card. Tried restarting the PC, tried running Add/Search new hardware wizard. Nothing gets detected. This PC is more trouble than it is worth! The firewire ports and usb ports on the same front panel all seem to work? I've run out of things to try so if anyone has an idea I'd be grateful..
Tech support from MSI - rubbish.

I dont think it is then end of the world if the card reader doesnt work, anyway
what OS are you using? Windows XP should install a driver automatically.
Is the flash drive cable connect to to the motherboard? check the manual to find the cable and enusre it is connected.

HP Probook 450 GO laptop SD card reader not working

SD card reader not recognizing any sd card and not working. Any suggestions?
+ Touch pad not working with double click - have to use the button below

Hello @Jurists
Thank you for posting on the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since the ProBook 450 G0 is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP ProBook 450 G0 Notebook PC
I hope this helps!
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Media card reader not working

Hi:
I have a Compaq Perserio A900 running Vista
My built in media card reader has stopped recognizing my cards when I put them it. Usually a green lite will light up on the card and then the auto run will pop up, but not nothing.
The only thing I've done recently was install a sandisk ultra backup 16gig flash drive hardware and I use the flash drive in the USB port that is just above the card reader.
I also have 2 other USB ports on the right side of the computer. I was going to use on of them for the flash drive, but they seem to be dead or something. I tried to plug my iphone into them and they do nothing, it doesn't charge or anything.
Do each USB's have to be dedicated to a particular pariphial?
I guess I can live with one USB working but I certainly need my card reader to work.
Help would be appreciated.

Hello,
the drivers are there:
http://support.lenovo.com/de/de/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
http://support.lenovo.com/de/de/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
It depends on the installed Card Reader.
Please try and give feedback if this helps.

EliteBook 6930p SD card reader not working

Hello,
SD card reader stopped working on my EliteBook 6930p because of broken card socket. I found audio/card reader board on eBay, it looks same, but has got different part number. Can audio/reader board part no. 48.4V902.021 be replacement part for board no. 55.4V902.011?

Hello yohanonbenavrom. I understand you are experiencing issues with a memory card reader. I will provide the HP documentation to troubleshoot the issue. Please select the correct document based on your operating system:
Windows XP and Vista: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07910
Windows 7: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01564223
Windows 8: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03453319
Please respond when you complete the troubleshooting. I look forward to your response.
Mario
I worked on behalf of HP.

Pavilion g6 series SD-MMC card reader NOT working

I have Pavilion g6 series. My SD-MMC card reader isnt working. How to fix?

Downloading this driver should sort out the problem!
http://download.gamblis.com/2011/03/30/hp-pavilion-g6-1a69us-notebook-realtek-card-reader-driver-6-1...

Memory card reader not working

Compaq Presaro CQ3000 Series Model CQ3420AN Memory card reader not reading any SD cards.
Where can I find download for original driver.
This question was solved.
View Solution.

http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/Memory-Card-Reader-not-uploading/m-p/1265779...
Here's a page that might help you resolve your problem if you haven't assigned a drive letter for your portable card readers.

Flex 14 SD card reader not working with larger cards on Windows 8.1

The card reader in my Flex 14 is behaving very oddly. When I insert a 16GB SDHC card it makes the 'USB inserted' noise and the card shows up under device manager but I can't access it through file explorer. The card reader works fine with smaller SD cards that I have. I tried the card in another, Win7 laptop and it worked fine.
I see a number of other people are having a similar problem and I have followed all of the troubleshooting advice I can find, but nothing is working. Does anyone have any other suggestions?
This is what I have tried:
1. Leaving the card in the camera and attaching the camera via USB cable to the laptop: same result, noise, but can't access the card.
2. Trying to reassign the drive letter through storage controller: it shows the card but if you right click it to assign it a drive letter it says the 'file is missing'.
3. Downloaded the Win8.1 x64 driver from Lenovo website and installed. This stopped the card being recognised at all.
4. Installed the Win8 xc4 driver: this got me back to the noise but no action stage.
5. Updated Windows.
6. Uninstalled and reinstalled the driver numerous times both with the card inserted and without it and with restarting the computer after unistall and after reinstall.
7. Ran Ubunutu from a live USB: This allowed me to see the card and copy its contents to the laptop's HDD.
So it seems to be some incompatibility between the Lenovo drivers and Win8.1. Potentially it's to do with the USB drivers rather than the card reader drivers as the result when using the USB cable and the camera was the same as putting the card in the card reader. Is there a way to update these?
Any other troubleshooting steps I could take?
Thanks.

What size are the cards?
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Z61t SD card reader not working?

Similar Messages

Maybe you are looking for