Z68-GD65 G3 Need help with half bricked BIOS update

Sorry if this should be in the BIOS forum, wasn't 100% sure. Long story short...
i2600k
16GB Corsair Ram
Crucial M 128GB
GTX460
I was trying to update the board to the latest BIOS. I didn't realize the file/method from the MSI website was so problematic. I ran E7681vP8.exe from within windows, the BIOS was updated and it then rebooted the system to update to ME8. It never got to the ME update and I was stuck in an infinite reboot loop. Power on for 10 seconds, then off, then back on again. Tried everything I could think of to get the system back. Cleared CMOS via button and battery, no change. Rotates ram sticks in slot 2, disconnected everything but USB keyboard and plugged the monitor into the DVI port on the board, no change. This was last night and I had already setup my RMA when I decided to try one more CMOS clear this morning before packaging everything up. Well the Gremlins decided to let it power on and POST this morning! I hit F1 to enter setup and here is the problem...
It's now asking me to insert my USB key I'm assuming to now do the ME8 update... Well I formatted the USB drive I was using with the forum tool last night in an attempt to revive the board, so I don't have the extracted files from the MSI EXE from the website.
I downloaded the EXE again, but I can't get it to run/extract the files since it's only set to run on this board (I'm on a Lenovo laptop). I tried WinRAR, 7-Zip, and Universal Extractor on the EXE to try and just get the files back on the USB. None of those work.
So the system is on and I'm stuck at the screen asking for the USB key. I don't want to power it off/cycle it in case that screws up the update somehow.
Can someone else with this board download the EXE directly from MSI, run it on a USB key (you don't have to update the BIOS to get the files to extract) and maybe upload the contents? Or Mods do you have another suggestion on how to continue?
Thanks!

Quote from: jmunchies1 on 02-April-13, 07:23:05
Well I'm REALLY regretting upgrading to this BIOS as it's killed my overclock :(
Before I was stable with a 2600k @ 4.5Ghz with just 1.325 vcore. Now I'm up to 1.35 vcore and I'm still not stable :( Keep getting this BSOD:
"A clock interrupt was not received on a secondary processor within the allocated interval".
IBT and prime95 keep causing that BSOD. I don't understand why the BIOS update is requiring such a huge increase in vcore.
Because it is a 'compromise' UEFI/BIOS designed to allow function of both Sandy and Ivy CPUs on a mainboard originally designed on the Sandy Bridge platform. It's a shame that the GD65(G3) Ivy update does not function as well as the GD80(G3) vJ21 version does.

Similar Messages

I need help with my Nokia 5800 update to v40.0.005

Hey im having trouble with updating my Nokia 5800 to v40.0.005.
The version on my phone at the moment is v21.0.025 and when i try to update it on my phone it says no update available.
I tried downloading Nokia Update Software and getting it from there but the program wouldnt work either.
Is there any other way i can get the v40.0.005 were it should work? or even getting the knetic scrolling and applications without needing to get v40.0.005?
Please need help!
Thanks
Solved!
Go to Solution.

Under your battery, there's a product code on a sticker (X: 0586707). Go here: http://europe.nokia.com/support/download-software/device-software-update/can-i-update and type in your productcode to see if there should be an update for your productcode. If there's not, you could take your phone to a Nokia Carepoint and ask if they could do it - no promises. Or else you have to wait untill your productcode gets it.

I know this is a common thing, but i need help with half tones

This is the problem I have . I am trying to make half tones for screen printing so i need to make solid color halftones to cut down on colors( for example doing a 50% black half tone instead of making a new screen for gray).
I get how to make halftone gradients and rasterize for illustrator, and using the halftone swatches would work if they had them in higher dpi.
Can someone help me out?

function(){return A.apply(null,[this].concat($A(arguments)))}
I am trying to make half tones for screen printing so i need to make solid color halftones to cut down on colors( for example doing a 50% black half tone instead of making a new screen for gray).
Just fill your gray objects with a 50% tint of the spot color you are printing. In the Print dialog, specify the halftone screen ruling.
function(){return A.apply(null,[this].concat($A(arguments)))}
I get how to make halftone gradients and rasterize for illustrator, and using the halftone swatches would work if they had them in higher dpi.
Assuming you are printing to a PostScript device, you can print as color separations and specify the halftone ruling, angle, and shape for each ink in the Print dialog. You don't have to use any kind of fake halftone such as Pattern Swatch fills.
JET

Need help with Bulk Collect ForAll Update

Hi - I'm trying to do a Bulk Collect/ForAll Update but am having issues.
My declarations look like this:
     CURSOR cur_hhlds_for_update is
        SELECT hsh.household_id, hsh.special_handling_type_id
          FROM compas.household_special_handling hsh
             , scr_id_lookup s
         WHERE hsh.household_id = s.id
           AND s.scr = v_scr
           AND s.run_date = TRUNC (SYSDATE)
           AND effective_date IS NULL
           AND special_handling_type_id = 1
           AND created_by != v_user;
     TYPE rec_hhlds_for_update IS RECORD (
          household_id HOUSEHOLD_SPECIAL_HANDLING.household_id%type,
          spec_handl_type_id HOUSEHOLD_SPECIAL_HANDLING.SPECIAL_HANDLING_TYPE_ID%type
     TYPE spec_handling_update_array IS TABLE OF rec_hhlds_for_update;
     l_spec_handling_update_array spec_handling_update_array;And then the Bulk Collect/ForAll looks like this:
       OPEN cur_hhlds_for_update;
       LOOP
        FETCH cur_hhlds_for_update BULK COLLECT INTO l_spec_handling_update_array LIMIT 1000;
        EXIT WHEN l_spec_handling_update_array.count = 0;
        FORALL i IN 1..l_spec_handling_update_array.COUNT
        UPDATE compas.household_special_handling
           SET effective_date = TRUNC(SYSDATE)
             , last_modified_by = v_user
             , last_modified_date = SYSDATE
         WHERE household_id = l_spec_handling_update_array(i).household_id
           AND special_handling_type_id = l_spec_handling_update_array(i).spec_handl_type_id;
          l_special_handling_update_cnt := l_special_handling_update_cnt + SQL%ROWCOUNT;
      END LOOP;And this is the error I'm receiving:
ORA-06550: line 262, column 31:
PLS-00436: implementation restriction: cannot reference fields of BULK In-BIND table of records
ORA-06550: line 262, column 31:
PLS-00382: expression is of wrong type
ORA-06550: line 263, column 43:
PL/SQL: ORA-22806: not an object or REF
ORA-06550: line 258, column 9:
PL/SQL: SQMy problem is that the table being updated has a composite primary key so I have two conditions in my where clause. This the the first time I'm even attempting the Bulk Collect/ForAll Update and it seems like it would be straight forward if I was only dealing with a single-column primary key. Can anyone please help advise me as to what I'm missing here or how I can accomplish this?
Thanks!
Christine

You cannot reference a column inside a record when doin a for all. You need to refer as a whole collection . So you will need two collections.
Try like this,
DECLARE
   CURSOR cur_hhlds_for_update
   IS
      SELECT hsh.household_id, hsh.special_handling_type_id
        FROM compas.household_special_handling hsh, scr_id_lookup s
       WHERE hsh.household_id = s.ID
         AND s.scr = v_scr
         AND s.run_date = TRUNC (SYSDATE)
         AND effective_date IS NULL
         AND special_handling_type_id = 1
         AND created_by != v_user;
   TYPE arr_household_id IS TABLE OF HOUSEHOLD_SPECIAL_HANDLING.household_id%TYPE
                               INDEX BY BINARY_INTEGER;
   TYPE arr_spec_handl_type_id IS TABLE OF HOUSEHOLD_SPECIAL_HANDLING.SPECIAL_HANDLING_TYPE_ID%TYPE
                                     INDEX BY BINARY_INTEGER;
   l_household_id_col         arr_household_id;
   l_spec_handl_type_id_col   arr_spec_handl_type_id;
BEGIN
   OPEN cur_hhlds_for_update;
   LOOP
      FETCH cur_hhlds_for_update
        BULK COLLECT INTO l_household_id_col, l_spec_handl_type_id_col
      LIMIT 1000;
      EXIT WHEN cur_hhlds_for_update%NOTFOUND;
      FORALL i IN l_household_id_col.FIRST .. l_household_id_col.LAST
         UPDATE compas.household_special_handling
            SET effective_date = TRUNC (SYSDATE),
                last_modified_by = v_user,
                last_modified_date = SYSDATE
          WHERE household_id = l_household_id_col(i)
            AND special_handling_type_id = l_spec_handl_type_id_col(i);
   --l_special_handling_update_cnt := l_special_handling_update_cnt + SQL%ROWCOUNT; -- Not sure what this does.
   END LOOP;
END;G.

HT4623 Need HELP with this ..since updating my 4S iphone today

After updating my 4s phone, I suddenly have every facebook friends contact info in my contact list on my phone...all 1000 of them... NOT GOOd... some of them I only play games with. Where did that come from and how do I get rid of that feature?

I figured it out... there is a place on the main contact page where you can actually uncheck Facebook...or check it

Need help with DVD model/Firmware update info

I am sorry to post here but have found no other way to try and get help or information about a Toshiba, (supposedly) slim style internal DVDRW unit, TS-632H, for our computer. The label on the unit says Toshiba Samsung, and the complete number on the label is Tsst corp CDDVDW TS-632-H. (This is what is also shows in Device Manager/Properties for the unit. We are trying to find the (real) model of this unit so we can determine the firmware version to make sure we have the latest version on the unit and to see if there are any specific drivers for the unit. Thank you for your help and again, sorry if this may be the wrong forum and maybe directing us to an appropriate forum would be appreciated if there is such one. Thank you.
Message Edited by Cmptrguy on 04-12-2009 04:11 PM

The information you see in the Device Manager is correct. If you can furnish the full model# be of great assistance. There, try this-- Free Download TSST DVD Drive Firmware for Toshiba Notebooks You should be concerned that the driver is up to date as it more of an asset to you.

I need help with java Time Zone Updater for Venezuela Time Zone

Hi,
I've run the latest Time Zone Updater (1.3.5) on JRE 1.4.2. It is supposed to support the time zone changes for Venezuela. The problem is that when I set my Windows time zone and run java.util.TimeZone.getDefault() it says that I am on GMT instead of GMT-04:30.
Am I doing something wrong?
Thanks in advance for your help.

I have found the solution for cases in which you cannot update your JRE to anything further than 1.5. You will have to create an extra entry in the Java tzmappings file as follows:
Venezuela Standard Time:90,90::America/Caracas:After doing this, you will have to create a new String Value in your Windows registry for the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Time Zones\Venezuela Standard Time Key as follows:
Name: MapID
Value: 90,90
Best regards.

New to ABAP -- Need help with any BAPI to update the vendor master record

I have a requirement to update the vendor master record ( ie purchasing block data inlfa1 and lfm1 table )directly. i have created the report but my problem is i am updating tables directly by using modify which is not correct according to SAP hence i want to use bapi whereby i can change the fields of the table. does anyone know any bapi which can modify the lfa1-sprem field and lfm1-sperm field. Plz hep me. They have specifically asked me to do it using BAPI's.

MAP2e_lfa1_to_bapivendor_04
MAP2e_lfa1_to_bapivendor_05
will be helpful

HT4528 need help with i phone 4 update and restore

When i was at dinner tpnight my i phone lockrd up and now it says activate and i cannot get to settings menu

so what have you done to troubleshoot?

Need help with clickbios ii terminolgy and values. Z77A-GD65 / 3770k

Hello All
I recently purchased a Z77A-GD65 board and after searching I've found the differences in terminology between this and my previous Asus board but still have a couple of settings I cant find any info on.
System Specs:
motherboard: msi z77a-gd65
cpu: intel 3770k
ram: corsair vengeance 2133mhz 1.5v
psu: corsair 850w
First things first is I believe I am running in turbo oc mode. I've selected the oc genie tab on the center right of the bios screen and proceeded to change settings there. With cpu voltage on auto and vdroop set to 50% at 4.6ghz. (I'll try and get screenshots of bios settings soon)
The following are the terms I need help with:
In the my oc genie section;
1. Long duration power limit
2. Long duration maintained
3. Short duration power limit
In the main overclocking section;
4. Digital Compensation level (not in owners manual, options auto/high)
5. Cpu core ocp expander (enabled for overclock 4.5ghz+?)
In the CPU Features section;
6. long duration power limit w (does "w" stand for watts?)
7. long duration maintained s (does "s" stand for seconds?)
8. short duration power limit
9. primary plane current limit a (does "a" stand for amps?)
10. secondary plane current limit
11. primary plane turbo power limit
12. secondary plane turbo power
I know those are a lot of settings, but would appreciate any simple definitions as to what they do and recommended values for mild overclocking (4.5-4.80)
Also on my previous board (Asus P8P67 Pro) my 3770k was stable in prime95 for 18 hrs at 4.5ghz fixed 1.155v with only ram timings put in manually and LLC set to extreme.(or whatever max is called in asus bios) Voltage was fixed and everything else was defailts.

Well I'm back. Been digging around for a few days and found some answers to my questions.
First things first s that for some reason I could not adjust voltage values with the + or - symbols. Clearing cmos did not help this. I had to reflash the bios to get this functionality back as well as clearing cmos before and after the flash.
So I figured out the values in the oc genie section are the same as the normal section but only used when your using the oc genie. (numbers 1-3)
Digital compensation level and ocp expander should be set to high and enabled respectively when going for higher overclocks. (4 and 5)
Now for the rest of my questions ( 6 through 12) I have found suggested settings and some info after hours and hours of searching but still have a couple of questions about them.
Long/short duration power limit, and primary/secondary plane turbo limit. I see suggestion settings of 250 or 255. I take it this is simply max supplied watts to the chip? If so why the 250/255 values? Is that the highest the board will give? Is plane turbo limit related to the enhanced turbo stated and how much wattage can be drawn there while the other limit is for any non turbo frequencies?
Long duration maintained, I've seen 60 suggested a lot. Why is this?
There's not an over abundance of info on these boards as compared to asus so it seems info is a little less documented and video tutorials explaining things are next to none.
Any help would be appreciated. Thanks

Need help with this book problem...Pig game...can ANYONE help!??

I need help with the following book problem...could someone write this code for me?? Thanks!!
First design and implement a class called PairOfDice, composed of two six-sided Die objects. Using the PairOfDice class, design and implement a class to play a game called Pig. In this game, the user competes against the computer. On each turn, the current player rolls a pair of dice and accumulates points. The goal is to reach 100 points before your opponent does. If, on any turn, the player rolls a 1, all points accumulated for that round are forfeited and control of the dice moves to the other player. If the player rolls two 1s in one turn, the player loses all points accumulated thus far in the game and loses control of the dice. The player may voluntarily turn over the dice after each roll. Therefore the player must decide to either roll again (be a pig) and risk losing points, or relinquish control of the dice, possibly allowing the other player to win. Implement the computer player such that it always relinquishes the dice after accumulating 20 or more points in any given round.
I realize this is a long code, so it would be greatly appreciated to anyone who writes this one for me, or can at least give me any parts of it. I honestly have no clue how to do this because our professor is a dumbass and just expects us to know how to do this...he doesn't teach us this stuff...don't ask. Anyways, thanks for taking the time to read this and I hope someone helps out!! Thank you in advance to anyone who does!!!

Nasty comments? It's not a matter of not liking you, it's a matter of responding to the
"I'ts everyone else's fault but mine" attitude of your post.
If you are genuine, the program is very easy to write, so, your Professor is correct when he said you should
be able to do it. I'm still very much in the beginner category at java, and it took me only 20 mins to write
(+5 mins to design it on paper). 2 classes in one file < 100 lines. Most of the regulars here would do it in half the time / half the lines.
All of the clues are in the description, break them down into their various if / else conditions. Write it down on paper.
Have a go. Try to achieve something. Post what you've tried, no-one will laugh at you, and you will be
pleasanty surprised at the level of help you will get when you've "obviously" made some effort.
Again, have a go. If you don't like problem-solving, then you don't like programming. So, you gotta ask
yourself - "what am I doin' here?"

Need help with doubles

I need help with a double cheeseburger. I want one for lunch but am not hungry enough to eat it all. Who wants half?
We can split some Walker's crisps, too.

public class DoubleCheeseburger extends Hamburger
implements AnnoyanceOfAnimalRightsAdvocates
   boolean bacon;
   public DoubleCheeseburger()
      bacon = false; //explicitly don't want bacon
   public DoubleCheeseburger(boolean bacon)
      this.bacon = bacon;
   public boolean splitIt(int portions)
      boolean cleanSplit = true;
      System.out.println("Splitting the food into wedges of "+(360/portions)+" degrees each.");
      if (bacon = false)
         System.out.println("No need to worry about splitting the bacon slices.");
         cleanSplit = true;
      else
         System.out.println("Someone may not get enough bacon.");
         cleanSplit = false;
      return cleanSplit;
}

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Z68-GD65 G3 Need help with half bricked BIOS update

Similar Messages

Maybe you are looking for