[Z68A-G43 (G3)] Please replace the ME version problem

Hey,
i flashed my BIOS to the newest version 5.2 and installed the new ME drivers. Now Control Center gives me this error.
When I flashed the BIOS my CPU was OC'ed. I tried to look at some of the guides how to fix this but didn't quite understand what to do.
So if someone would be awesome and make me a simple step-by-step how to fix this that would be great!
I have already dl'ed and installed the MSI HQ Forum USB flasher.
Thanking you in advance!

I think you installed the wrong ME drivers. Did you install the ones for your board here:
http://www.msi.com/product/mb/Z68A-G43--G3-.html#/?div=Driver&os=Win8%2064
If so, try this version:
http://www.msi.com/service/download/driver-18192.html
or
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22090&keyword=management+engine&lang=eng

Similar Messages

  • Please replace the ME version

    Hello,
    i have
    MSI Z77A-GD65
    Intel I5 2500K
    GSkill DDR3 1600
    i have update the bios to 10.8 and the ME Firmware to 8.1.40.1416 and MEI drivers to 9.5.10.1538
    because when i launched click bios II it's said "install Intel ME 8 driver"
    after this it stop saying this.
    But now it's controlcenter that says "please replace the ME version !"
    please tell me what is wrong in what i have done and what should i do to make it right.
    i put you the MEinfo
    Intel(R) MEInfo Version: 8.1.10.1286
    Copyright(C) 2005 - 2012, Intel Corporation. All rights reserved.
    Intel(R) ME code versions:
    BIOS Version:                           V10.8
    MEBx Version:                           0.0.0.0000
    Gbe Version:                            1.3
    VendorID:                               8086
    PCH Version:                            4
    FW Version:                             8.1.40.1416
    UNS Version:                            Not Available
    LMS Version:                            9.5.10.1538
    MEI Driver Version:                     9.5.10.1538
    Wireless Hardware Version:              Not Available
    Wireless Driver Version:                Not Available
    FW Capabilities:                        0x01101C60
        Intel(R) Anti-Theft Technology - PRESENT/ENABLED
        Intel(R) Capability Licensing Service - PRESENT/ENABLED
        Protect Audio Video Path - PRESENT/ENABLED
        Intel(R) Dynamic Application Loader - PRESENT/ENABLED
    CPU Upgrade State:                      Upgrade Capable
    Cryptography Support:                   Disabled
    Last ME reset reason:                   Power up
    Local FWUpdate:                         Enabled
    BIOS Config Lock:                       Enabled
    GbE Config Lock:                        Enabled
    Host Read Access to ME:                 Enabled
    Host Write Access to ME:                Enabled
    SPI Flash ID #1:                        EF4017
    SPI Flash ID VSCC #1:                   20052005
    SPI Flash BIOS VSCC:                    20052005
    BIOS boot State:                        Post Boot
    OEM Id:                                 00000000-0000-0000-0000-000000000000
    Capability Licensing Service:           Enabled
    Capability Licensing Service Status:    Permit info not available
    OEM Tag:                                0x00000000
    Localized Language:                     Unknown
    Independent Firmware Recovery:          Enabled
    and ask you just a last thing, what is UNS and why it's mark as not available.
    thank for your responses
    Cedric

    Unless Intel has changed in the last few days of the chipsets that are supported, ME9 is 'only' for Z87 boards! Not sure anybody really knows how bad ME9 could possibly mess up your machine either.
    Quote
    i have update the bios to 10.8 and the ME Firmware to 8.1.40.1416 and MEI drivers to 9.5.10.1538
    because when i launched click bios II it's said "install Intel ME 8 driver"
    ME8, not ME9 driver! If not done so, check at the MSI Website for the very latest CC software. If the latest is installed, removing ME9 driver and installing ME8 driver fixes it, then all is good. If not, contact MSI Technical and see if they can help;
      >> How To Contact MSI <<

  • ControlCenter tells me: Please replace the ME Version!

    Hi all, I have the z77a-gd65. After deinstalling Click Bios II, my Control Center tells me upon launching it: "Please replace the ME Version". The Intel management engine conponent in my installed program list tells me that it is on version 8.1.30.1349. I believe that should be the one I installed just two weeks ago from the drivers page of my mainboard. I didn't flash anything on the Bios. I bought it with bios 10.8 and ME firmware v.8.1.20.1336 on it.
    Should I run the installer for the ME drivers again ? Or are there new ME drivers for Win7 64 for the z77a-gd65 board ?

    Seems to be an unsolved Control Center issue. Ignore it or even don't use Control Center:
    https://forum-en.msi.com/index.php?topic=167489
    See if reinstalling Click Bios II helps if the problem arised with uninstalling it: http://www.msi.com/service/download/utility-17383.html

  • The dreaded "Please replace the me version"

    Anyone know how to get rid of this annoyance?
    Z77A-G45 Gaming board
    Intel 1155 Socket
    I have tried using the original versions of Control Center and ME as well as the latest version.
    I have the latest Bios.
    Thanks

    Version: v17.2
    Build Date : 20131030

  • Laptop says 'This version of iTunes has not been correctly localised for this language. Please run the English Version'. Can anyone help please, have no idea what to do and haven't used laptop in over a year. iPad/iPhone have lost tunes from laptop too.

    my laptop will not open iTunes, as it just says 'This version of iTunes has not been correctly localised for this language. Please run the English version'. I have not synconised my iPhone 5S or iPad 2 with iTunes for well over a year. I noticed the music which had previously been put into iTunes has dissappeared from my phone and iPad. I also want to remove some movies from my iPad and iPhone and there is no way I can do this without being able to manually sync with the Laptop which is running windows 7. Has anyone else come across this and please can you help? I am no expert in fact I know very little about the Laptop, it is my Husbands baby but he doesn't understand anything to do with Apple including iTunes. I will need any advise explained step by step please.

    Hi Shelady,
    Try downloading and reinstalling the latest version of iTunes from the first link below. If that doesn't do it, the suggestions in the second article should resolve the installation issue.
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    -Jason

  • After  a system restore, I get an error message telling me that "This version of iTunes has not been correctly localized for this language.  Please run the English version." the E

    I did a system restore, trying to get rid of the new update (which I HATE), and now when I try to open iTunes, I get an error message telling me that "This version of iTunes has not been correctly localized for this language.  Please run the English version."  You can't change the language option unless you can open iTunes - and IT WON'T OPEN!!!  What a piece of crap!  If there existed an iTunes substitute, I would purchase it in a hot minute! 

    Strip it out and start again.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
    iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
    iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
    tt2

  • Why am I getting an error stating this version of iTunes has not been correctly localized for this language. Please run the English version when I just bought a song yesterday and had no problems

    I have iTunes running on my Windows8 desktop for some while with no problems. Yesterday I purchased a song, deleted a free game app. and upgraded to the most current version of iTunes.  This morning I could not pull up iTunes, so I retored my iTunes to a setting two (2) days ago.  Now, as soon as I try to start iTunes I get a message stating: This version of iTunes has not been correctly localized for this language. Please run the Enclish version OK.  So I hit the OK button and nothing happens.  Please help.

    Hi there GloriaNM,
    You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    -Griff W.

  • Please run the English version...

    I have tried everything I can think of to get iTunes to install properly. After a completely clean install I still receive an error message on launch that reads, "This version of iTunes has not been correctly localized for this language. Please run the English version." Any ideas?! Thanks in advance for the help.

    found this in another thread:
    So, I spent almost an hour on the phone with Apple who was also dumbfounded about this occurance. so finally 5 minutes ago, the guy said:
    GO TO YOUR [HOME FOLDER]
    CLICK [LIBRARY]
    & DRAG THE [[CACHES}} FOLDER TO THE TRASH.
    now try to open itunes
    here is another thread (the OP is on 10.6, though): http://discussions.apple.com/thread.jspa?threadID=2151088&tstart=0.
    good luck !
    JGG

  • Itunes player says it has not been correctly localized for this language, Please choose the English version. It has played fine up until today.

    All of a sudden I can't play my itunes, everytime I click on the icon it comes up with an error message " This version of Itunes has not been correctly localized for this language. Please run the English version. There has never been a problem before. How can I choose a language when I can't even open the program? Thanks for any and all assistance!

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • MacAir - error message "This version of itunes has not been correctly localized for this language. Please run the english version" Saw other answers for windows users, I have a MacAir. never used any other language but English

    Trying to open iTunes - get an error message saying "This version of itunes has not been correctly localized for this language. Please run the english version" Saw other answers for windows users, I have a MacAir. never used any other language but English so I have no clue what the problem is.  I just want to update my phone and back it up.

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • I've tried to open itunes but just get error message saying this version of itunes has not been correctly localized for this language. Please run the english version

    Looking for some help.  I am trying to open itunes and I keep getting an error message saying "This version of itunes  has not been correctly localized for this language. Please run the english version"
    Can anyone help.

    Hi there nisbetk,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W.

  • When I try to open itunes it says; This version of itunes has not been correctly localized for this language.  Please use the English version.  How do I fix this problem?

    When I try to open itunes it says; This version of itunes has not been correctly localized for this language.  Please use the English version.  How do I fix this problem?

    Hey KEBENNETT, 
    It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally. 
    I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
    Issues installing iTunes for Windows - Apple Support
    All the best,
    Jeremy 

  • TS1967 my itune library won't opn i get a message saying this versio of itunes has not been correctly localized for this lanuage please run the english version

    itunes won't open it gives a message saying "this version of itunes has not been correctly localized for this language. please run the english version" i have a large library

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • This version of itunes has not ben correctly localized for this language. Please run the english version. What do I do?

    this version of itunes has not ben correctly localized for this language. Please run the english version. this error comes up once a week. I usually do recovery on my computer. Is there anything faster and easier I can do?

    Hello Ballbeerfish,
    The article linked below can help resolve this issue with iTunes (starting with completely remove and reinstall iTunes and all components).
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Cheers,
    Allen

  • I restored my pc and nowit won't open itunes, when i try to, it reads " this version of itunes has not been correctly localized for this language. please run the english version." how do i fix this so i can open my itunes and back up my iphone?

    I restored my pc and now it won't open itunes, when i try to, it reads " this version of itunes has not been correctly localized for this language. please run the english version." how do i fix this so i can open my itunes and back up my iphone?

    Hey KEBENNETT, 
    It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally. 
    I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
    Issues installing iTunes for Windows - Apple Support
    All the best,
    Jeremy 

Maybe you are looking for

  • Web Services General Question

    Hi All, Does web services in Java mean to simply provide a SOAP container that wraps around an EJB (or even a web container)? If this is true, all of the work that's been done with the development of EJBs can be preserved, and other system will make

  • Is using key events really that hard?

    I am trying to implement a keyListener for my application, and it seems way harder than it should be. My application is simple: A JFrame with one button and one JPanel upon which I draw. When I click in the JPanel and type, I want things to happen. A

  • Problems with linking iPhoto to external drive files

    In order to back up my iphoto albums, I mistakenly put the original files on an external drive rather than dragging the iphoto icon to the external drive.  Now I cannot directly open those files located on the external drive from iPhoto on my laptop.

  • Obejct key mismatch between webservice and entity service

    Hi I created one web service using entity service in one caf project. Now i created another project. I have one entity service in this project which is using the previous web service. when i am testing my second project using service browser, I am ge

  • Super-Drive region playability issues...

    I work at an authorized campus reseller, and a professor stopped in and said he makes frequent trips between the US and Italy. However, he has switched the region of his DVD player so many times that it is now stuck in region-2 which is europe, of co