Z68A-G43G3 Won't Post with Proc and RAM which work on my ASUS board

I bought two i7-2600K procs and a z68-G43 G3 board, along with an ASUS board because the store didn't have a second MSI board.  The CPU and RAM (Kingston DDR3 - 1600) work fine on the ASUS board, as I built that one first.  When I boot up the MSI board I don't get the normal bios screen, I get a message which says
EFI Shell version 2.10[4.640]
Current running mode 1.1.2
map: cannot find required map name.
Press ESC in _ seconds to skip startup.nsh, any other key to continue.
Shell>
Since I bought the board and left town for a project, I built the system after the 15 day return period offered by the store, so I am here since I cannot take it back.  Is this a BIOS issue?  I assume that since I cannot get past this point that I cannot flash the bios, but wanted to get some opinions here.  I am in a bit of a time crunch and don't want to spend money on a new board if I don't have to.
Please help!

Quote from: SomeoneInAusTx on 07-May-12, 01:19:07
Problolem solved.  I placed the RAM in the same slot order as instructed on the ASUS, but the MSI suggested order was different.  I am putting on my dunce cap now.
Can you elaborate on what you mean? I am receiving this same issue and I am not sure what to do. I plan on swapping the 2 RAM DIMMS when I return from my business trip; however, I am skeptical that it will resolve the issue since the 2 DIMMS are identical. Specifically, the components are:
MSI FM2-A75MA-P33 FM2 AMD A75 (Hudson D3) SATA 6Gb/s USB 3.0 Micro ATX AMD Motherboard
Team Dark Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory (Blue Heat Spreader)
Thank you!

Similar Messages

  • P67S-C43: Won't POST with two sticks of RAM

    Hi, my new P67S-C43 has a peculiar problem: It won't POST with two sticks of RAM. I've tried both of my sticks (2 x 2GB G.Skill Ripjaws DDR3-1600 CL9 1.5V) individually in Slot 1 and the system POSTs fine. When I insert the second stick in any other slot, the system proceeds to restart unsuccessully a couple of times and then it will not POST. Only one blue LED is illuminated. When the system is in this state I have to reset the CMOS in order to POST successfully with a single stick of RAM again, which made the problem difficult to diagnose and very annoying to troubleshoot (lose BIOS settings after every attempt with the clear).
    Any idea of when we'll see a new BIOS? Are any betas available? I'd like to see if this is a BIOS problem before RMAing it.
    Thanks.

    Quote from: HU16E on 14-January-11, 16:52:36
    Which BIOS do you now have? Current official is V1.5. It would possibly help to have a full listing of all the systems components. Work with the one RAM stick initially in the primary dimm slot, blue closest to CPU. Get the OS loaded, drivers, etc., then add the second stick in the other blue dimm slot later. I have a feeling the RAM is setting itself up wrong. Might try the manual settings of 1333 9 9 9 24 @ 1.50V's.
    The BIOS was 1.5 out of the box but it's my understanding from another thread that there have been a slew of beta BIOSs released. I'm not going to load the OS until I get this straightened out. Also, both sticks would have the same settings with one stick or two installed. I fiddled with voltage, timings, etc but it still wouldn't work when I popped in the second stick. LIke I said, after every attempt with two sticks I have to clear CMOS or it won't work again with one stick. I'm hoping to try a newer BIOS before spending more hours on this, one setting at a time.
    Also, I have a 2600K but the rest of the components are irrelevant. At one point I had everything but the CPU/fan, video card, and RAM unplugged and the mobo entirely out of the case. Still didn't work until there was only one stick.

  • Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either.

    Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either. All I did is download instagram and snapchat and poof doesnt work. I have had these apps before!

    Make sure it's plugged into the charger.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Post with clearing and only clearing

    hi,
    what is the difference between POST WITH CLEARING and CLEAR GL/CUSTOMER/VENDOR?
    fb05 is post with clearing whereas f-03, f-32 and f-44 are clearing.
    so what is the difference that 1 is POST with clearing and the other 3 are just clearing.
    thanks

    hi,
      According to ur requirement, u have to make use of this, like f-32 it is for clearing at the time of vendor who is also a customer, like custmer pay 100, for vendor we have to pay 100, in this case no need to go for payment, u can clear by using f-32, u check this u can able to understand, where as other cases are with payment, u can try down payment clearing also with that u can able to understand, if u have any doubts let me know , i can try
    Thanking u,
    swathi

  • TS3992 My notes won´t syncronice with iCloud and I have turned it on in the IOS device. What do I do wrong?

    My notes won´t syncronice with iCloud and I have turned it on in the IOS device. What do I do wrong?

    Make sure you have Notes turned to On in Settings>iCloud.  Also, open Notes and tap Accounts on the top left, then make sure you are creating the notes you want to sync with iCloud in the iCloud account (and not something else like On My iPhone).

  • Copy of attachement in Post with reference and recurring documents

    Hi Gurus,
    While using Post with reference and recurring documents, can we also copy the attachment from the source document?
    Please revert asap
    Thank You

    Hi,
    How you been able to create attachments for a recurring document at all?
    I  could not create any attachment.
    Miroslav

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer

    Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer with the driver that came with the printer and I've tried to find an update but with no success, can you help me?
    Thanks!!

    you can try resetting the network settings in settings or you can try doing a reset - hold down the home/power button together until you see the apple logo and then release.  Then wait for the phone to boot back up.  You won't lose any data.

  • Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few m

    Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few months and updates ago

    I tried your suggestion, not knowing that the direct pdf printer would also "save as" PDF, but when I try your suggestion and use the Adobe PDF printer that is a direct creation of the PDF from the browser (IE9), instead of the "black out" areas I get when I use the "Convert to" button, I get missing blocks of the resulting PDF, and only get the first 1/4 to 1/3 of the webpage.
    Just to clarify, when I said I print the webpage and then scan, that is a work around I have to do if I need a scanned version of the way a webpage appears on a particular date and time, instead of the one step process I used to be able to do when Adobe Acrobat would actually convert the webpage to a pdf without blackout areas or, if I try your suggestion, blank spots with a partial webpage. But the idea was one I had not thought of and I appreciated the thought.
    Yes, Acrobat was updated, and is updated, and was working fine until a few months ago, Win 7 and Office 32 bit versions, Office 2010

  • I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks :)

    I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks

    click on the contact which you want to integrate, click the edit button scroll down u will find a option called link contacts use it to link it to the duplicate contact

  • My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

    My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

    I have not had any experience in getting any devices repaired so I'm not sure which store to resort to. An official Apple store should more than likely get you what you need, but I'm guessing it's probably more expensive. (if any cost for your situation)
    I hope you get your problem resolved.
    ~Lt. Leviathan

  • Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

    Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

    Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.

  • I created a new apple id for my iphone and ipad which work great and allow me to access Icloud. on my macbook air can't get it to use my new apple id for icloud. Help?

    I created a new apple id for my iphone and ipad which work great and allow me to access Icloud. on my macbook air  I can't get it to use my new apple id for icloud. It keeps going back to my old apple id and doesn't afford me to alter it. I use system preferences-icloud and it just wants to verify the old apple id but doesn't afford me the opportunity to delete teh account or edit it like the iphone5 and ipad. Help?

    Welcome to the Apple Community.
    You need to use the sign out option on the left side.

  • I cannot log into Adobe Reader through my iphone using the Adobe ID and password which work on the w

    I cannot log into Adobe Reader through my iphone using the Adobe ID and password which work on the website.

    Hi Will,
    That's great that you could sign in now.
    I think issue you faced in signing was because email verification was not done before. And when you signed from web client, you might have received a note asking you to do verification. It solved the logging issues you were facing on iPhone as well.
    -Charu

  • MSI P67A-C43 B3 won't POST with Full RAM Installed

    Hello all,
    I recently purchased the MSI P67A-C43 B3 mainboard as a custom build
    and have been having trouble with it.  I have 16GB of ram for this board
    (4x 4GB) and when I have 8GB installed (slots 1 and 3 filled), it POSTS fine. 
    When I fill ALL the slots for 16GB total, the board won't POST and just
    power cycles ON and OFF and ON and OFF, etc...
    I have replaced the memory and the PSU and am about to replace the
    mainboard, but wanted to ask if anyone might have a suggestion for
    troubleshooting before I do that. 
    Here's what I'm running on the system:
    mainboard:  MSI P67A-C43 B3
    proc: Intel Core i7-2600K 3.4Ghz Unlocked
    proc cooler: Corsair Hydro H80 CPU Liquid Cooler
    ram: Corsair High Perform Vengeance 4GB DDR3 1600Mhz2x4  (4 of these)
    HDD: OCZ TECHNOLOGY 120GB VERTEX PLUS SSD and Seagate 1TB LP Serial ATA HD 5900/32MB/SATA-3G
    CD Drive: Sony Optiarc 24X DVDRW SATA
    video: EVGA GeForce GTX 560 Ti FPB 1024MB GDDR5 PCB PCIe
    PSU: Thermaltake 750W Modular Power Supply. 80+ Bronze
    case: Thermaltake Chaser MK-I Full Tower Gaming Case
    OS:  Microsoft Windows 7 Professional 64Bit DVD
    Any ideas here would be greatly appreciated!  Thanks!

    OK, had some time to go test your suggestions here
    These are the 1.5V Vengeance RAM Modules.  Tried installing 2 of the RAM on slots 2 and 4 on their own.  System Boots Fine.
    Went into the BIOS and changed the voltage applied to the RAM modules from
    AUTO to 1.575V.   On AUTO it says is applying 1.5V to the 2x 4GB modules.
    Installed the full 4x RAM on all slots... and the system just shuts down.  Power cycling again.
    What do you think here?  Bad Motherboard?  Can't think of anything else to try...  totally stumped! 
    Thanks!

Maybe you are looking for