Z68A-GD55 G3 -- how do you get it to boot with 4 DIMMs installed?
Howdy folks,
I am really hoping that someone here can enlighten me on this magical BIOS setting that allows you to boot this unit up with all 4 DIMM slots populated? I have scoured the dark corners of the interwebz trying to figure this out and it completely eludes me, I even read the manual cover to cover... all I can find is a couple posts where people have updated the bios or went into the bios and changed a setting allowing them to escape the reboot loop that I get with all four memory slots filled.... the unit boots just fine with two DIMMs installed and it doesn't matter which two... I found this on a post but nothing else:
"One more thing, it wouldn't boot with four RAM-sticks out of the box, but it worked fine to start with only 2 RAM-sticks and use F1 to change bios-settings. After doing it that it had no problem with 4 RAM-sticks."
Take from: Google search "Z68A-GD55 megathread" since I can't post external links, the author of the article is "the Squonk"
Any one encounter this before?
Thanks in advance,
TF
That is a handy tool, thanks for pointing me to that.
Way more information but doesn't even show what you asked for?
Better printout:
Memory SPD
DIMM # 1
SMBus address 0x50
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 8192 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number CMX8GX3M1A1333C9
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-17-22 @ 457 MHz
JEDEC #2 7.0-7-7-20-26 @ 533 MHz
JEDEC #3 9.0-9-9-25-33 @ 685 MHz
DIMM # 2
SMBus address 0x51
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 8192 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number CMX8GX3M1A1333C9
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-17-22 @ 457 MHz
JEDEC #2 7.0-7-7-20-26 @ 533 MHz
JEDEC #3 9.0-9-9-25-33 @ 685 MHz
Similar Messages
-
a.
After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...
b. , c.
What's the best browser to try?... Firefox?... Opera?...
Why?...
d.
What directory/ies contain the downloaded Flash 9 files?...a. Your browser and the flash player should work together. You should not have to do any thing
b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
c. hard disk - library - internet plug ins -
How do you get help to download with Creative Cloud DW6
How do you get help to download with Creative Cloud DW6? When I try to open help on the menu bar it generates a directive to download help or reload the program.
Thanks in-advance to the input,
Regards,
JackJack,
If you're looking for help on Dreamweaver CS6, you can go to http://helpx.adobe.com/support/ and select the product of your choice to look at the self-help resources.
Thanks
Nikhil -
a.
After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
b. , c.
What's the best browser to try?... Firefox?... Opera?...
Why?...
d.
What directory/ies contain the downloaded Flash 9 files?...a. Your browser and the flash player should work together. You should not have to do any thing
b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
c. hard disk - library - internet plug ins -
How do you get ipod to work with other computers
i am getting a new dell computer, how do I get the computer to recognize my ipods?
purr0
If indeed you have the HP Officejet 6500a make sure that you have the latest firmware on the printer and that you are connected to the same netwok. Locate the action icon on your apple mobile device, when you have a photo or document open, find print select print and printer then print again. The following docment should help.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02623193&lang=en&cc=us&taskI...
I am an HP employee. -
How do you get mod_perl to work with the bundled apache2?
I have read a few reports on how to get DBD perl working and some people talk about compiling apache 2 and mod_perl, but I want the standard apache2 which is running smoothly with my php install to handle perl too.
Can someon give me a list of commands and steps to do and run to get this working? I know php, a bit of C have compiled before but allways forget how it is done. I have no problems editing httpd.confs or php.inis so probably perl's configs and configure files won't be a problem. Thanks in advance.Thanks for the thought etresoft. I did not find it in the httpd.conf as an so module to be enabled, so I presumed it was nowhere to be found. But it seems it is in the /usr/libexec/apache2 folder just like all the other modules, find found it .
I just added this to my httpd.conf and now it is working:
LoadModule perl_module libexec/apache2/mod_perl.so
Alias /perl/ /Library/WebServer/Documents/perl/
<Location /perl/>
SetHandler perl-script
PerlResponseHandler ModPerl::Registry
PerlOptions +ParseHeaders
Options +ExecCGI
Order allow,deny
Allow from all
</Location>
I was stuck mentally it seems. Thanks for the bump. -
How can you get Apple's attention with a software problem?
From the lack of responses to my posting regarding the YahooSync.exe file,
http://discussions.apple.com/thread.jspa?threadID=1778225&tstart=15
I wonder how one gets the attention of Apple and the iTunes programmers with a legitimate software issue such as this? I can't seem to find anything under "Contact Us" whereby I can submit input.http://www.apple.com/feedback/itunesapp.html
-
How do you get html5 to work with Firefox?
I have disabled and removed adobe flash player. I go to youtube, enable the html5 trial version, and try to view videos and it won't work. If I enable flash, the videos work fine. I can get html5 to work in Chrome, but it will not work in Firefox. Why?
It is starting to sound like Google is being a dick and gearing their service to be fully functional with their browser and not others, unless it is the fault of Firefox. Because every video works in Chrome with html5.
Flash is being annoying. Frequently, it will freeze Firefox, and then I will get an error message saying that the flash player stopped working. I almost always get this freeze on startup of the browser (if I forgot to disable Flash) and then I get other times while using Firefox as well. I only get this problem when flash is enabled, therefore it is flash. You can argue that it is only my computer, which maybe it is, but I cannot find a solution, nor have I been able to solve it, except by disabling flash. -
Tweetdeck not working in my Firefox browser v. 36.0
Hi tdyer89,
Thank you for your question, however please also seek support from Tweetdeck. At webcompat.com investigation can be done as well.
Null usually refers to a missing file or not value in a entry. If this is happening in other places of Firefox please consider a clean reinstall after [[Back up and restore information in Firefox profiles]] -
How can you get BTTM to work with a Gateway 2wire 3600hgv
Is the 2Wire 3600hgv compatible with back to my mac (BTTM) from outside the network?
I have been unable to successfully setup BTTM for use from outside my home wireless network. From within the home wireless network I can share files between desktop (iMac) and laptop (Macbook). But from outside the network I can not connect to the home computer. BTTM is recommending that NAT-PMP or UPnP be enabled on the router. However, I cannot locate these options on the router settings. Both computers are running the latest OS X from Mac (10.8.2)
I have done a lot of researching and seem to only find old posts for similar questions. Is there a current solution for this?I have exact same question too. If anyone come up with an answer yet?
-
For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading Flash 9 ?... for the link at
http://www.universalhub.com/node/24494
"To watch this video you need Flash 9
You have an old version of Flash. Fortunately we can upgrade
your computer to Flash 9 without without any hassle. Just click on the
upgrade button - you don't even need to leave the page!
[ Upgrade now! ]
After Flash 9 is downloaded, you'll need to restart your browser.
[ Download and install manually. ]"Hello Again Don,
It appears you have been struggling with this issue since November of 2008.
Have you considered upgrading to a newer version of OS X instead?
11/20/08 What workarounds are there for OS X 10.3.9 users on websites with flash
4/12/09 How do you get the current Flash to work with OS X 10.3.9 ?...
5/25/09 After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
8/9/09 How can OS X 10.3.9 users view Flash on websites?...
8/9/09 How do you get Flash 9 to work with OS X 10.3.9 ?...
ali b -
How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP
Kappy wrote:
Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
Boot into Recovery (hold ⌘R on boot)
Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
Quit Disk Utility
Then Select: Restore from a Time Machine Backup. -
How do you get Safari Browser back on your Iphone if your daughter erased it?
how do you get safari browser back on your iphone if your 4 yr. old daughter deletes it by accident?
You cannot delete Safari.
It is either on another page, in a folder, or you have restirctiosn set.
Check all three of these possibiities. -
How can you get your photos in the order they are in your computer
How can you get your photos synced to your phone in the same order as the file on your computer?
The iPhone Photos app orders photos by date.
-
How can you get your submit buttons on the quiz template to be a single click instead of the default double click? (The option to choose double click or not is not showing in properties for this).
Hmmm... Submit button doesn't need a double click at all. Maybe you are talking about the two-step process? When you click on Submit, the feedback appears with the message to click anywhere or press Y. Is that what you are talking about? If you are talking about a real double-click, something must be wrong in your file. And which version are you using?
http://blog.lilybiri.com/question-question-slides-in-captivate
Lilybiri
Maybe you are looking for
-
Costing sheet in control tab of production order
In OPL8 iam able to configure default cost accountings for production order type but why costing sheet is coming by default in production order costing section. Is there anyway to hide that costing sheet (AUFK-KALSM) from display to the users without
-
OS X 10.6.1: Mail.app Crashes When It Is Launched.
I'm sure that Apple Engineering and Support will be ****** with the number of problem reports being generated by system. Somewhere Mail.app is maintaining a pointer to the last opened mailbox. The mailbox contains a single entry for a message that ha
-
VIBER does not work! the update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.
-
AQ Expired messages Propagation
Hi, We have an advanced queue with expiration time set to 24hours after which the messages in the Q are routed to AQ exception queue. We have a requirement to route the message to another queue after the expiration time, with transformation saying th
-
File Saving with Linked Images
Why does file saves take longer when images are linked (not embedded.) ? It's just linking to the file, it should be nice and quick to save, such as it is in inDesign.