Z68A-GD65 G3 & Intel Management Engine Driver

I've recently uninstalled the ClickbiosII and Control Center, I also uninstalled the "Intel Management Engine Driver" I thought this was only required for Control Center to communicate with the board to make changes to cpu clock/multiplier in the OS, which I do in bios anyway, but since I no longer use Control Center I should no longer need the "Intel Management Engine Driver" or?
Everything still works fine and I can still monitor voltages and temperatures.
But just incase I decided to look for an updated version of the driver, where it seems that the driver on the MSI site is a few revisions behind the ones on Intels site.
On MSI:
Intel Management Engine Driver, Version: 7.0.0.1144, 2012-03-13
Intel Site:
Intel Management Engine Driver for Intel 6 Series Chipset-Based Desktop Boards , Version: 7.1.40.1161, 04/16/2012
Chipsets:
Intel® Desktop Board DZ68BC
Intel® Desktop Board DZ68DB
Intel® Desktop Board DZ68ZV
But upon closer examination I also see drivers for 6 & 7 series boards:
There is also:
Intel® ME: Management Engine Driver for Intel 6 & 7 Series Chipset-Based Desktop Boards, Version: 8.0.10.1464, Date: 04/19/2012
Which no longer has support for the Z68, however the previous version 8.x.x.xxxx series does.
Intel® ME: Management Engine Driver for Intel 6 & 7 Series Chipset-Based Desktop Boards
, Version: 8.0.4.1441, Date: 03/23/2012
Which also still supports the following chipsets:
Intel® Desktop Board DZ68BC
Intel® Desktop Board DZ68DB
Intel® Desktop Board DZ68ZV
Now this driver is "older" than the 7.1.40.1161 driver but has a higher version #, so should I go after version # or the date, which ones would you use, or are already using?

Ok, I reinstalled the drivers again, seems sandybridge needs it to function properly, at least what people are saying on various forums.
Is this what it is?
http://software.intel.com/en-us/articles/architecture-guide-intel-active-management-technology/
http://www.intel.com/technology/platform-technology/intel-amt/
http://software.intel.com/file/43527
http://www.intel.com/en_US/Assets/PDF/general/ug_Intel_MEBX.pdf
Or if anyone got more accurate documents that'd be great.

Similar Messages

  • Z87 gd65 Intel Management Engine Driver fails to install.

    The Intel Management Engine Driver from the MSI z87-gd65 website did not install correctly.
    I was updating some drivers here and there and noticed a newer version of the MEI had been released.  The installation procedure came back with a nasty error, and a pesky exclamation point showed up in my device manager.  I was able to install the newest version (10.0.0.1204) by googling for Management Engine Interface and downloading directly from microsoft, but I would have preferred to use the file on the MSI site, as I believe the one I used was intended for another motherboard.
    This is the driver I ended up installing, which worked correctly.
    Was anyone else having problems updating the management engine driver?
    z87-gd65
    4770k (stock)
    16g ddr3
    250gb ssd

    There is nothing wrong with downloading from Intel's page. It's them providing the driver anyway, and MSI just used it on their product page to make it easier to find; there's no specific driver of Intel ME for specific motherboard or setup. So you're fine.

  • Intel Management Engine Driver

    Is there a connection between ME in the BIOS and the Intel Management Engine Driver that can be downloaded from the motherboard product page?
    What I mean is if I install the downloadable driver from the motherboard page, does this over write something that the ME applied from a BIOS update does or vice versa if I updated my BIOS after first installing the driver from the motherboard page?
    Do they need to match as the downloadable driver from the motherboard page is a lower version number than the one contained in the latest beta BIOS for the Z77A-GD65?
    What does enabling the ME option in the BIOS do?

    I actually download my ME from Intel directly as they have a newer version than the MSI website. They don't have to match, and the one for inside windows should be updated when possible like other drivers.

  • H77MA-G43 3570k Intel Management Engine Driver error

    Hi guys!
    i've got the following problem.
    every time i run controlcenter o biosclick ii i get the following error:
    please install intel me8 driver to enable cpu overclock
    so as a responsible person i went to my motherboard drivers page and got the
    Intel Management Engine Driver files
    i run it and then i get this error:
    this computer does not meet the miminum requirements for installing the software
    i checked and i have .net framework 4 installed but now im stuck... any ideas? i want this error gone :(
    edit:
    did what the sticky said
    https://forum-en.msi.com/index.php?topic=163549.msg1198800#msg1198800
    Use M-Flash with ME the MSI recommended way, but one that seems prone to bricking one of your bios's
    tried reinstalling the driver... no go

    im running win7 64
    i installed it from this link
    http://www.msi.com/product/mb/H77MA-G43.html#/?div=Driver&os=Win7%2064
    which says it supports the following OS
    Win8 32, Win8 64, Win7 64, Win7 32, Vista 64, Vista 32, XP 64, XP 32
    im at a loss :S

  • Which Intel Management Engine driver goes with Me Update ME8.1.50.1456 bios

    I got Motherboard Z77A-G43
    Which Intel® Management Engine driver software i should download that will go with Me Update ME8.1.50.1456 bios
    Type   AMI BIOS   Language   English
    Release Date   2013-11-01   Version   2.12
    File Size   5.46 MB   File   Download
    Description   - Update MFLASH module.
    - Update ME8.1.50.1456.
    - Support KAMA reader Tr, Akasa USB card reader.
    - Improved memory compatibility.
    http://ca.msi.com/support/mb/Z77AG43.html#down-bios
    Thanks

    Ok Thanks
    but it say it's for : For Intel ME FW 8.1.40 system
    I figured that they maid a intel management driver software version 1.50.1456?!?
    So i already got the intel FW 8.1.40 driver install and bios 2.11), i'll just go and update to
    the last bios Version   2.12 or 2.13 that content the flash the ME8.1.50.1456 update, without installing in window any new intel management driver?
    thanks

  • Intel management engine driver for Z77 GD45 gaming motherboard

    I see 2 driver version for the motherboard for the intel engine interface.
    1 -     Intel Management Engine Driver
    OS    Win8.1 32, Win8.1 64, Win8 64, Win8 32, Win7 32, Win7 64, XP 32, XP 64    Language    English    Version    9.5.15.1730
    2 - Intel Management Engine Driver
    OS    Win8 64, Win8 32, Win7 32, Win7 64, XP 32, XP 64    Language    English   Version    8.1.30.1349
    i installed the first one and when i try to installed the second one it tell me that there is a newer version installed.
    need a clarification for those driver.

    Because the 'older' one is the right one for your mainboard's chipset series. Unless found otherwise in some official Intel information, ME 9 is not the proper version and may not work correctly.

  • Intel Management Engine Driver 1.5m or 5m?

    As above, should I install the 1.5m driver or the 5m driver on my Z77A G43?
    Thanks 

    Intel intends for the 5MB version to be part of server and office oriented boards and for the 1.5MB version to be part of desktop boards. Which one is implemented on each non-Intel board depends on the motherboard maker but as far as I can tell most companies comply with what Intel specifies.
    For its own boards Intel uses the 5MB version on boards using Q and B series chipsets and the 1.5MB version on boards using the X, Z, Q and P chipsets. MSI should be doing the same.
    Now, the driver you use on desktop boards doesn't matter. If you use the 1.5MB version it will work. If you use the 5MB version it will also work. No features will be disabled in either case.
    Now if you have a server or office board things change a bit. If you use the 1.5MB version it will work... but AMT related features and of course their settings pages will not be available (see http://en.wikipedia.org/wiki/Intel_Active_Management_Technology for more info). If you use the 5MB version it will work with all the AMT related features being available, assuming that the related features are also enabled from the Management Engine configuration screen on the board BIOS (usually accessed by pressing ctrl+p while booting the system).
    TL;DR version: If you're in doubt, just use the 5MB driver.

  • Intel Management Engine Driver? Intel VGA driver

    Is this driver necessary?  If so why?  I am using the MSI H87-G43 Intel board.   Is the Intel VGA necessary as well? I will only be using the integrated graphics on the CPU HD 4400.
    Any help would be appreciated thanks.

    If you are using the onboard graphics, then you are using the Intel GPU which is integrated in your CPU. To have full graphics functions, you must install it.
    Also the ME firmware must be installed, it controls all the Intel integrated circuits and functions.
    Just use your installation CD or download the latest from the MSI website

  • Intel Management Engine windows 8 Pro

    I am running windows 8 Pro on a MSI x79a-GD65-8d board. Device management shows an exclamation mark for 'PCI simple communications controller'. This should be related to a missing Intel Management Engine driver. However I can't find such a driver for windows 8 on the MSI website.
    Any ideas about how to fix this? Thanks.

    After several BIOS updates, this is still a problem (Same MB as the OP and sorry for Hijacking your thread Bud )
    I am on E7760IMSv1B1 and it still shows up as not recognized (1.8 Official off the MSI website did not solve the problem).
    It doesn't seem to be affecting the operation of the Motherboard but it is still annoying that it won't resolve.
    Win 8 64 Pro
    Edit - after reinstalling the MEI drivers AGAIN, the problem seems to have solved itself - cheers

  • Re: Z97 Intel Management Engine Removal

    http://www.msi.com/support/mb/Z97-MPOWER-MAX-AC.html#down-driver&Win8.1 64
    QuoteMicrosoft Hotfix installation is required for Intel Management Engine Driver to be installed successfully.Have no idea what that means but it may be related.

    Hi guys I have been able to get sound blaster cinema working on windows 10. It is in compatibility mode, but at least it works. A detailed description of how is in my post under the topic where is windows 10 drivers. a short version is.
    1 download the ...

  • Which ME (Intel Management Engine) version do I have?

    Where can you check which ME (Intel Management Engine) version* you currently have?
    *Firmware version

    Quote from: msiforever on 27-November-14, 17:43:28
    7.0 or 7.1?
    I'm trying to figure out if I can install the Intel Management Engine Driver 7.1.52.1176. You have to have ME 7.1 firmware for that according to my MB download page*.
    I've currently got ME driver 7.0.0.1144. Doesn't that suggest I have Intel ME 7.0 firmware as well?
    *http://www.msi.com/support/mb/P67AGD65_B3.html#down-driver&Win7 64
    Quote from: msiforever on 27-November-14, 17:43:28
    7.0 or 7.1?
    7.0.4.1197
    Quote
    I'm trying to figure out if I can install the Intel Management Engine Driver 7.1.52.1176
    Yes, you can
    Quote
    You have to have ME 7.1 firmware for that according to my MB download page*.
    no, ME driver versions are different the ME firmware versions, but need to be the same main base, ie 7.xx

  • Update Retriever - Missing Intel Management Engine Interface Driver for Lenovo Twist (334725RU)

    I am left with two unknown devices in Device Manager. It appears to be the Intel Management Engine Interface Driver, which is unavailable in Update Retriever. I see it on the website as gars04ww.exe.
    Please add this to the repository.
    Thanks,
    Hans
    Hans Lima

    The other one is the Realtec Card Reader gaxm05ww.exe
    Hans Lima

  • [Z77A-GD65] Intel Management Engine 8.1.2.1318

    Hi
    Since I last flashed my BIOS (10.7) I can see that the ME is showing in the BIOS information as being 8.2.1.1318 but on a fresh install of W8 64bit I installed all the necessary drivers including the latest ME drivers (same version).
    What I'm finding odd is that even though the download file says its ME_1.5M_Win8_8.1.2.1318_HF2 it shows up in 'Control Panel' > 'Programs' > 'Programs and Features' as 8.1.0.1281.  Also, in 'Device Manager' > 'System devices' >'Intel Management Engine Interface' as 8.1.0.1263.
    Just wondered if anyone was experiencing the same and whether anyone knows why there are two variations of the 8.2.1.1318 driver download?
    e.g.
    MEI_1.5M_Win8_8.1.2.1318.exe
    MEI_5M_Win8_8.1.2.1318.exe
    http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&keyword=%22intel+management+engine+drivers%22&DownloadType=Drivers
    I have tried resetting the CMOS and also have reflashed the same BIOS and reinstalling ME drivers 8.1.2.1318 but still reports the same.

    I've only been using the forum flashing tool which when I used it prior to the current 10.7 Bios, I flashed A71 beta which is what I believe introduced the latest ME (8.2.1.1318).  When I flashed the latest 10.7 I just downloaded the official Bios from the motherboard downloads page and used the forum flasher to create the USB stick.  Following the flash I switched off the PC when given the option to reboot, so that I could remove the power supply cable from the PSU and wait for the motherboard to drain its power and reset the CMOS using the reset button on the rear I/O of the motherboard.
    The Bios does show in the info section where it shows the date and time etc that the ME version is 8.2.1.1318.
    I wondered if perhaps it was a mistake with the Intel ME driver install if someone hadn't updated the reference value within that which relates to the version number but judging from your response your ME driver shows the correct version in the Programs and Features screen of Windows?
    So if I understand what your saying if the Bios doesn't include the ME that the flashing process wipes out the ME that was there and requires a separate process to put the ME back on?

  • Intel Management Engine Interface problem.

    Hi evryone, i have problem with Intel Management Engine Interface on my laptop HP Elitebook 8470p, I did:
    - Install driver for MEI by Drivers, Software and Firmware for HP EliteBook ... 
    - Update new bios by Drivers, Software and Firmware for HP EliteBook ... 
    But when i open Device Manager , Intel Manager Engine Interface cannot start (error code 10)
    - When i restart then open Device Manger, device MEI have not list in Device Manager.
    But when I shut down and turn on laptop, device MEI list in Device Manager with error code 10.
    Any body can help me? Thanks.

    Hi bondpham,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the {insert product model} is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime: HP EliteBook 8470p Notebook PC Support.
    I hope this helps, good luck!
    I worked on behalf of HP.

  • Intel Management Engine Interface, Device status: This device cannot start (Code 10).

    hi Tec,
    Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
    Issue: my computer auto restart after 2 hours please resolved the issue
    Logs captured from System summary:
    [Problem Devices]
    Device  PNP Device ID   Error Code         
    Intel(R) Management Engine Interface
    PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.               
    Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled. 

    Hi Jeenny,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
    You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
    Hope this helps. Do post back if issue persists!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Error in Account Determination for WHT Sales Order

    Hi I am doing VF02. I gave billing document number. But its telling, error in account determination (Message No. VF051). I went to VA02, entered sales order number and did analysis of account determination. But i am unable to find any analysis for th

  • Lenovo not working with samsung Lcd TV.need advice...

    I am using a Lenovo 3000 N100 series AQ1 768 laptop.Its got no external graphics card.I want to connect it to my Samsung LA32B550  LCD TV via a vga cable. I have all the hardware fixed but there seems to be something missing on the configuring sectio

  • Problem with air port

    I am wondering if anyone can help me with network connection.. i bought a macbook and connected with network connection with no problem.. but the router went dead and i got a new router from linksys to d-link.. i had installed with the same network n

  • [SOLVED] Modesetting with external monitor broken (intel)

    After recent updates, modesetting during boot no longer works if an external (vga) monitor is plugged in. Once it gets to modesetting, both screens go black and I can't tell what happens after that (Might hang, might boot fine I just can't see it-) T

  • Very New To Java, Using Sun One Studio

    I am doing a small work project for a company and they would like me to do a small project using the JavaMail API and the Java One Studio. Now I have some experience with Java, It is installing the JavaBeansTM Activation Framework and the JavaMail AP