Z68A-GD65 (G3) very slowly with win8

HI Everybody!
Please help me!
I have a Z68A-GD65 (G3) MoBo with 16GB DDR3 RAM. While i use win7/64 Ultim., my copy files results partitions to partitions 130-160MB/sec. I install win 8/64 Ultim. my copy results: 50-70 Mb/sec.
I Install the latest win8 drivers from mis official site
What can I do?
thx anything answers.

Try these drivers:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22270&lang=eng&OSVersion=Windows%208%2C%2064-bit*&DownloadType=Drivers
Other win 8 drivers:
http://www.msi.com/product/mb/Z68A-GD65--G3-.html#/?div=Driver&os=Win8%2064

Similar Messages

My macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?, my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?

my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?, my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?

How much free disk space do you have and how much memory do you have, running which operating system? Need that information to have any basis to make recommendations.

Validate() works very slowly with jse 1.4.2.

Hi, I have a question about the method validate(). I really appreciate it if somebody could help me out.
I have some components (buttons, textfields etc) in a panel. Let me refer it as Panel A. When I click one of the buttons in Panel A, I would like to remove some components and add some other components in Panel A. If I click the same button again, I would like to have Panel A return to the original configuration.
I call method validate() only once after I remove and add components for each click event. This works perfectly with Java 2 runtime environment SE 1.2 and it take very little time. However, this program works very slowly with Java 2 runtime environment SE 1.4. That means with JSE 1.4, after I click the button, the Java applet will still be able to add and remove components, but it take very long time.
Would somebody please give me a hand on this? Thanks a lot!

Thanks for mzarra's suggestion. Here is my code:
// Buttons: virtualModelButton
// Panesls: pp_right, pp_right_bottom, pp_button1, pp_right_top2
else if (evt.target == virtualModelButton)
if (virtualModelButton.getLabel() == "Show Virtual Model")
pp_right.remove(pp_right_top);
pp_right.add("North", pp_right_top2);
pp_right_bottom.remove(pp_button1);
pp_right.validate();
virtualModelButton.setLabel("Show Control Panel");
else if (virtualModelButton.getLabel() == "Show Control Panel")
pp_right.remove(pp_right_top2);
pp_right.add("North", pp_right_top);
pp_right_bottom.add(pp_button1, 0);
pp_right.validate();
virtualModelButton.setLabel("Show Virtual Model");
}

Adobe Acrobat Standard 9.3.1 loads pages very slowly with Windows XP 64 bit version

Our company has purchased Dell Precision T3500 workstations with Intel XEON processor and 6 Gb of RAM. The operating system is Windows XP 64-bit version. The systems came with Adobe Acrobat Standard 9.3.1. Each one of these workstations load PDF files into Acrobat very slowly. Does anyone have a answer why?

Quote
Originally posted by Some1ne
Here's a step-by-step description of how to install the RealTek RTL8169/8110 driver, as the process isn't quite as straightforward as it should be:
1. Download the Windows AMD64 Drivers available here:
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True
2. Extract the files in the archive to somewhere like c:\win64drivers\ethernet
3. Once inside Win XP 64, do the following:
a. Click Start -> Settings -> Control Panel -> System -> Hardware -> Device Manager
b. Go down to the "Other Devices" section (they'll have yellow ?'s)
c. Right click on the ethernet controller and click "Update Driver"
d. Click "Install from a list or specific location (Advanced)"
e. Click "Dont search. I will choose the driver to install."
f. Double click the "Network Adapter" entry, and then click "Have Disk..."
g. Select the directory which you extracted the driver files to
i. You will get messages saying that Windows cannot verify that the driver matches your hardware, and that the driver is not WHQL certified. Ignore these and click "Continue"/"Install Anyways" and your RealTek RTL8169/8110 ethernet adapter will spring to life
after i have done this the pc just stops. and if i reboot it stops at the loading screen :/ can you tell me whats wrong i got a k8t neo serie card and windows 64 bit edition
edit: i did it :D works now

MacBook Pro running very slowly, with lots of pinwheeling, especially in Safari

Here's the Etrecheck report:
Problem description:
Mac is running very slowly…especially Safari…lots of pinwheel time.
EtreCheck version: 2.1.8 (121)
Report generated March 17, 2015 5:16:05 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    4 GB RAM
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 299
Video Information: ℹ️
    Intel HD Graphics 4000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.8.5 (12F45) - Time since boot: 22:59:8
Disk Information: ℹ️
    APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
        disk0s1 (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (438.20 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
    [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
    [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
        /System/Library/Extensions
    [loaded]    com.kaspersky.kext.klif (3.0.4d41) [Click for support]
    [loaded]    com.kaspersky.nke (1.6.4d15) [Click for support]
Problem System Launch Agents: ℹ️
    [failed]    com.apple.accountsd.plist [Click for details]
    [failed]    com.apple.coreservices.appleid.authentication.plist [Click for details]
    [failed]    com.apple.pbs.plist [Click for details]
    [failed]    com.apple.printtool.agent.plist [Click for details]
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.wdhelper.plist [Click for details]
Launch Agents: ℹ️
    [running]    com.kaspersky.kav.gui.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.kaspersky.kav.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Dropbox    Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    Flip4Mac WMV Plugin: Version: 2.3.4.1 [Click for support]
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.7.1
    CitrixICAClientPlugIn: Version: 11.1.0 [Click for support]
    iPhotoPhotocast: Version: 7.0
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
    BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    Virtual Keyboard
    URL Advisor
3rd Party Preference Panes: ℹ️
    BrowserPlus [Click for support]
    Citrix online plug-in [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 499.25 GB Disk used: 61.05 GB
    Destinations:
        Macintosh HD [Local]
        Total size: 500.11 GB
        Total number of backups: 9
        Oldest backup: 2013-09-10 23:44:06 +0000
        Last backup: 2015-03-16 15:01:07 +0000
        Size of backup disk: Adequate
            Backup size 500.11 GB > (Disk used 61.05 GB X 3)
Top Processes by CPU: ℹ️
         2%    kav
         1%    WindowServer
         0%    Safari
         0%    WebProcess
         0%    kav_agent
Top Processes by Memory: ℹ️
    1.10 GB    Safari
    558 MB    WebProcess
    129 MB    kav
    86 MB    Mail
    30 MB    WindowServer
Virtual Memory Information: ℹ️
    450 MB    Free RAM
    1.38 GB    Active RAM
    1.31 GB    Inactive RAM
    1.15 GB    Wired RAM
    4.22 GB    Page-ins
    4.50 GB    Page-outs
Diagnostics Information: ℹ️
    Mar 16, 2015, 06:13:31 PM    Self test - passed

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

My computer writes very slowly with Indesign CS6

If I open a document save with Indesign CS2 in CS6 my computer writes very slowly. Y must wait two or three seconds until appears the text.
But if I open a new document in CS6, I haven´t problems.

Do you happen to have many linked text boxes? If so, this can happen if too many of them are linked. I also had this a couple of times. The only solution then was to split them up again, which can not be done directly, but with one of the scripts named SplitStory.jsx.

Microsoft Word running VERY slowly with mid-sized document

About three days ago, Word started running very, very slowly—it seems to take letters forever to appear on the screen after I've typed them—sometimes I type even two or three words before any letters appear—I'll click somewhere on the screen and the cursor takes forever to appear. But this isn't happening in every Word doc; just one that's about 700 KB (268 pages). This isn't happening in other applications. I've worked on much larger documents in the past with no slow-down.
I'm running Word 14.4.4 on an 11" MacBook Air with OS 10.9.5.
I've restarted, repaired the disk permissions, and repaired the disk, but no dice. Closing other applications doesn't do anything; neither does making sure only one Word document is open.
Any thoughts about other things I can try?
Thanks, guys and gals.

I don't own a 7D, but I had someone send me a couple of files to test. one thing that struck me was the size of the RAW files: my 8MP 20D made 8MB files, my 12MP 5D makes 12MB files BUT the 18MP 7D files are 24MB.
So if your 30D follows the pattern of the 20D, the 7D files are three times as large as the 30D files. With your near minimum requirements set up, it may be that you just don't have the processing power for 24MB RAW files.
My set up (see below) handled the 7D files almost as well as files from my 5D, but I only had two to work with.
DLS
PS Welcome to the forum

Z68A-GD65-G3 boots slowly

I have this board in my computer, and I have found out, that if I have my 3D Connexion Space Navigator connected, then boot time is extremely slow.
Is there a fix for this?
My system:
MSI- Z68A-GD65-G3
Intel i7 2600K
Corsair Vengeance 16GB CL9 Kit
Corsair Force 3 240GB SSD
Nvidia Quadro FX-3700

The device may not be fully compatible, meaning that a BIOS upgrade may be required.
Does this slow response happen with a standard USB mouse ?
Suggest you log a ticket with MSI technical to allow them to test and provide feedback.
Which BIOS version do you currently have?
You can also contact 3DConnexion to see if there is an updated firmware available.

Ical running VERY slowly with 4 years of appointments

Ical version 2.0.5 is running VERY slowly. PowerbookG4 10.4.11. Also won't upload new data from my iphone. Itunes version 7.5. I have already reset the phone x2, and would like another way to resolving the syncing issue. Wondering if corrupt data might be contributing to the problem. HELP! I need my calendars efficient and syncing. Christine

Apple's growing too fast. They seem to be forgetting what got them here. The design and performance standards they set are beginning to fall. I bought an Apple two button mouse that clogs and works about half the time. Something I touch all day, every day works half the time. I've got iDisk and it intermittent at best. It syncs on about half my Macs I own, the other half the sync arrows spin constantly and never seem to be up to date. iCal is totally screwed up and, as I've noted in this thread, crashes my iTunes. My whole idea of moving into iCal, buying an iPhone is just out the window (pardon the pun).
I'm a Mac guy since 1987. All my work is on Mac, I stopped editing on Avid and switched to Mac, I write reviews and have always loved Mac gear. My reviews have been quoted on the Mac site. Now, the guy who has an Apple tattoo is forced to look into non-Mac products. I can no longer rely on the rock solid performance that's kept me in the fold and I can't let my business be based on a unsupported software. A calendar!!! How can a calendar be this screwed up? I swear, I wrote a better calendar program in Hypercard! Apple, you've got to get your eye back on the ball before it's too late!
Message was edited by: petemay

After reformatting hard drive, iPod syncs very slowly with iTunes

A couple of months ago I had to reformat my computer's hard drive. I keep all my music files on an external hard drive. After reformatting, the man who did this for me reloaded iTunes for me and imported all my music back into my iTunes library.
It seems that since that time, when I sync my iPod to the iTunes library, it takes many times longer than it used to. Maybe something else happened to my iPod or iTunes and the reformat is just a conincidence, but it really does seem to take three or four times longer to sync.
I have iTunes 7.4.1.2 and my iPod is an older one, a 40G with dock connector
Also, I recently bought some audiobooks to put on my iPod. I only had about 600megs available so the iPod would not sync. I then removed several Gigs from my iTunes library. When I click on the "music" icon under "library" it shows that I have only a little over 29G used which should leave well over 5 plus Gigs available for the new music. But when I try to sync the iPod, it gives me the message that I have only approx. 600 megs available. What's up. I never have had this problem before and I have had the iPod for several years.
Any ideas or suggestions?
Thanks,
Dennis

I actually learned yesterday that Apple didn't put USB 2.0 in their Macs until G5... something I was VERY irritated to find out. Turns out they were betting that Fire Wire would take off instead of USB 2.0, so they only equipped their machines with USB 1.1. So as a result, my iPod is unacceptably slow. Other nagging problems like this are convincing me that I'll have to get a new Mac Pro in the coming year, but for the meantime I think I'll be buying a USB 2.0 PCI card.
Thanks for your response.

Safari 5.1.10 working VERY slowly with OS 10.6.8

Does anyone know how to "fix" Safari 5.1.10 SLOWNESS problem with OS 10.6.8? I've seen this discussion before but the solution did not work for me.
Thanks fellow Mac users…!

Is it all sites or just a few & what are you using for internet access.
Some sites can time out or just stop - best way to see what is happening is to open the Activity Window and watch the site load.
If the items count is not moving try reloading the screen - the rest may show up faster.
Also how often do you clear your Safari Cache & cookies - edit if you want to keep some.

Iphoto is streaming very slowly with my new ATV 2? why?

I have about 100+ Events. Some Events have 20 pictures, some have 100 pictures; I have two issues
1) Trying to load an Event and the pictures in the Event I feel takes around 1min+ most of the times (feels like forever) - I dislike the experience
2) the Events are arranged OLDEST to NEWEST. The Newest is in the bottom, it takes forever to get to the Newest Event - is there anyway I can rearrange NEWEST to OLDEST - I played around a bit but did not succeed.
Thanks for the support in advance.

Welcome to the Apple Community.
If your slideshows are slow, it's likely to be your network that is slow, check for interference and change wifi channel if necessary.
I use albums for my photos on the Apple TV rather than events, you can arrange albums into any order you wish in iphoto and that order is retained on the Apple TV.

HT4060 Can you charge IPad on universal USB charger with USB to iPad charging wire? Seems to work. Very slowly however

iPad charges very slowly with universal USB adapter and iPad wire. Is this normal?
Is this safe?

tak9 wrote:
Ahh thats a shame, I knew it seemed to easy.
So does that mean you can simply transfer videos from the external hard drive to ipad? Do you need a wifi connection for that or can the ipad sync straight to the hard drive without that?
No first hand experience with them, but my understanding is that the HDs have a WiFi transmitter built in. You stream the content directly from it, probably using an app.

Macbook air either not working or working very very slowly on wireless

At home I have 2 laptops: a macbook air and a compaq presario v6000. The macbook air is either working very slowly with the eircom broadband, or else not working at all. The presario works at a good speed and is consistent. The air is fine on all other networks. Strangely, download speeds are normal nbut nothin else is normal.
I'm running OS X if that matters

Power off the router. Wait awhile. Power it back on. Wait until all the lights are lit up properly.
It will take a while.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212

Raid mode very slow/ crashing after installing driver (Z68A-GD65 (G3))

I recently purchased a Z68A-GD65 (G3) motherboard, i5-2500K, 8 gb ram, and a Crucial 64GB 4m SSD drive. The intention was to use the SSD drive for Intel Smart Response Tech.
Instructions tell me to place the SATA ports in RAID mode, which I did. During installation of Windows 7 (64-bit), I provided the "F6" raid drivers which installed. After that point, my hard drive (a WD 250GB SATAII drive) begins to perform incredibly slow. Once Windows 7 installs, which takes way longer than it should, Windows has problems booting and won't work properly.
I tried installing Windows 7 without the "F6" raid drive on install and that worked fine. Everything seemed to be working great. I then installed the Intel Rapid Storage Tech software and rebooted. Now my system is acting up again. It takes far longer to boot, it shuts down as soon as it boots, and it has even blue screened on boot. It is very unstable.
My SSD is unplugged during all of this. I'm just trying to get Windows 7 to run properly on my one mechanical drive in raid mode.
Do I have a bad motherboard? Anyone have any ideas?
Edit: I'm not using the Marvell ports. The hard drive works fine in IDE/ACHI modes... I've been using it for years.
Thanks

So it turned out that the issue was the hard drive itself. It had been running flawlessly for years as my system drive. However, the Intel iastor driver exposed a hidden issue with the drive.
I decided to check the Windows system event log for any clues. In there I saw errors with event id 9 on iastor. They were lined up with the times of the hangs and blue screens. Solutions I found online for this issue did not help. Luckily I have two hard drives in my system, although they are both the same model. I moved my data around and clean installed Windows on the other drive instead. The hangs and blue screens are no longer occurring.

Z68A-GD65 (G3) very slowly with win8

Similar Messages

Maybe you are looking for