Z68a-GD80 b3 bios fail ?

Hi,
i recently bricked my p67a-gd65 b3 via bios flash (both bios corrupted), and i got the z68a-gd80 b3 in return from msi,
now i do need to say when i first turned on my pc i immediately noticed the blue bios light was flashing, so i knew the first bios had failed and its now running on the second bios.
So i figured, lets update the bios, and i downloaded the latest bios version 20.1. And so i booted into dos, started to update Intel ME and then it flashed the backup bios.... then it automaticly rebooted and the infinite bootcycle maraton began... everything powers on for 1 sec and it dies, powers on for 1 sec and it dies.. etc et, there are no blue bios lights on when powering on so i thing the bios is partly corrupted, enough to NOT boot, but also enough to not turn on the bios lights on the mobo anyone got any idea ? i really don´t want to rma the board cuz i just got it like a few days, and the RMA proces of the p67a/gd65 took almost 2 months :(
Thanks in advance!

All you can do is try a full cmos clear w/ a bare bones set-up. What you should have done when you saw the blinking light was enable multi bios update in bios to recover the bad bios.
Probably the simplest thing to do is bring the board to a computer shop with an SPI programmer. It will probably cost around $50-$75 to get this fixed.
If you have a Sandy bridge CPU, stick with 7672vH5.zip unless there are issues. If you absolutely need to flash your bios, use the forum flash tool and archives.
>>BIOSes<<

Similar Messages

  • MOVED: Z68a-GD80 b3 bios fail ?

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=167520.0

    All you can do is try a full cmos clear w/ a bare bones set-up. What you should have done when you saw the blinking light was enable multi bios update in bios to recover the bad bios.
    Probably the simplest thing to do is bring the board to a computer shop with an SPI programmer. It will probably cost around $50-$75 to get this fixed.
    If you have a Sandy bridge CPU, stick with 7672vH5.zip unless there are issues. If you absolutely need to flash your bios, use the forum flash tool and archives.
    >>BIOSes<<

  • Z68A-GD80 (B3) Bios problem

    Hello experts,
    I want to build up a new machine. So I bought the mainboard Z68A-GD80 and an Intel 3570k. This cpu was not supported from start of the mainboard but the seller told me that he updated BIOS to the newest version before selling the board and he ran it successfully with this BIOS. So I installed all componenets and what happened:
    - The dual bios LED tells me that primary bios failes.
    - CPU phase led showing phase 10 after switching on power and then changing to phase 2
    - Screen is dark
    - I dont have a case speaker so I cannot hear beeping
    What do you suggest du do now?
    Thanks so much!!
    Florian

    The CPU phase lights are first at ten then at two is nominal. Those aren't going to tell you what's wrong unless none of them are on.
    If you kept the power disconnected from a power source, grounded yourself before touching the circuitry, carefully put the CPU in, put in compatible RAM in correct slots, then all of the PSU connectors attached securely to the motherboard connectors, double checked the heatsync is attached securely, then connected the power cord, then powered on the computer. If BIOS doesn't appear on the monitor, go back to the sales person.
    The heatsync is very important, if the thermal compound isn't carefully applied, or the heatsync itself incorrectly attached; the computer will not boot.

  • How do I set EFI mode in Z68A-GD80-B3 BIOS?

    I am trying to install Windows 7 64-bit onto a Seagate 3TB drive on a brand-new MSI Z68A-GD80-B3 motherboard but Windows keeps insisting on using an MBR style partition. When I connected the drive to another computer and used the Seagate utility to create a GPT partition, Windows refuses to install to it because it thinks the BIOS is in BIOS mode and not EFI mode.
    There is a complicated guide to force the EFI installer bootstrap here http://www.insanelymac.com/forum/index.php?showtopic=184349 but having to do all this seems ridiculous for a motherboard UEFI BIOS that is advertised as having 3TB+ support.
    So where is the setting (as I have seen on some other motherboards) that tells the bootable DVD/USB device that the BIOS is EFI and not legacy? Thanks!

    Putting the system into RAID mode wasn't too bad since I was only experimenting with the setup anyway. However, after doing some research on how to use the EFI console it appears it is currently not possible to boot into a GPT disk when the ICH controller it set to RAID mode.  :(
    I tried wiping the drive, I tried installing the GPT boot and then installing Windows to it. Interestingly, the error message isn't a showstopper - it is merely a warning unlike the other error messages. If you click on the GPT partition and say install Windows will indeed go ahead and install to it. But when the BIOS tries to boot to it, it cannot. My investigation with EFI console shows that when the controller is in RAID mode the hard drive doesn't even show up in the list of available devices in the console. Also when using the console to list the available EFI drivers, they only have 2 IDE drivers (one Intel, one Marvell) and 2 AHCI drivers (same deal) - no RAID.
    Furthermore, we appear to no be alone. I also have a Gigabyte GA-Z68X-UD3H-B3 for evaluation and it too has the same problem, both confirmed by my own tests and a message thread much like this one that states the EFI BIOS manufacturers have not written the EFI RAID driver for the Sandy Bridge architecture yet.    (I don't know if this is true for any other mobo manufacturers besides MSI and Gigabyte.)
    Anyway, I'm giving up for now on GPT and have formatted the 3TB drive as MBR. I am then using a special driver from Seagate that makes the remaining space appear as a separate drive. I suppose it would still be possible to combine this space if one were to create a spanning volume in Windows or Linux and combine the real 2TB volume with the virtual drive that contains the remaining space. But I'm going to just leave it as a separate volume.
    The only troubling thing is when or if MSI finally releases a BIOS with an EFI RAID driver I'll feel compelled to format the whole system as GPT and start again. *grumblegrumble*
    Isn't being on the bleeding edge of tech fun? 

  • Updating the Z68A-GD80 (B3) bios to use ivybridge cpu

    Hi,
    I bought the Z68A-GD80 (B3) board without realising that the ivybridge cpu's were only around the corner.  Anyway I thought there would be a large price gap between the sandybridge and ivybridge cpu prices, how wrong could you be.
    I haven't built the rig yet as I was waiting for a bios update to accommodate the jump to an ivybridge cpu and to make sure the board could support a ivybridge i5 3570K cpu model.
    As there is only a 10 to 18 pound gap between the two cpu models is there any reason not to go for the ivybridge version?  Also does the updated bios work properly?
    Many thanks.....John

    Quote
    Bernard, Froggy and flobelex, much appreciated.  Can I ask if your answers remain the same in concern the G3 board as they did for the B3?
    My reply would still be similar to Reply #2. Since you do have a 'G3', one benefit would be the ability to run a PCI-E 3.0 graphics card to it's full potential. Even PCI-E 3.0 is not all that superior in performance to earlier PCI-E 2.0 revisions. I have both, a GD80(G3) with a Sandy CPU and Ivy BIOS, and one with an Ivy. Rather than go into all the details, they both suck as far as I am concerned, with the Ivy CPU rig being the worse! The Ivy UEFI/BIOS's IMO are not ready for prime time. Even with two PCI-E 3.0 GTX680 cards in SLI, my eyes don't see any real world visual benefit over them running at PCI-E 2.0 on the other mainboard.
    Soon as an ironclad user level procedure is developed that I can restore both primary and secondary chips back to Sandy BIOS's and ME7, I will do so. The Ivy CPU will be sold off. Performance wise, the 2700k is a kickbutt CPU compared to an Ivy on a 6 series chipset mainboard!    

  • MSI Z68A-GD80 B3 bios problem :(

    Hi... I've got a very strange problem with my motherboard. The bios diode is blinking (I know that it means my first bios has failed). But I tried fixing method from topic with GD65 and it didn't work. Any ideas?

    Remove the PSU power cord, remove the battery for awhile, clear CMOS, reset making sure to enable BIOS update again, save & exit, & then see if the chip LED stops flashing.

  • MOVED: Updating the Z68A-GD80 (B3) bios to use ivybridge cpu

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=161420.0

    Quote
    Bernard, Froggy and flobelex, much appreciated.  Can I ask if your answers remain the same in concern the G3 board as they did for the B3?
    My reply would still be similar to Reply #2. Since you do have a 'G3', one benefit would be the ability to run a PCI-E 3.0 graphics card to it's full potential. Even PCI-E 3.0 is not all that superior in performance to earlier PCI-E 2.0 revisions. I have both, a GD80(G3) with a Sandy CPU and Ivy BIOS, and one with an Ivy. Rather than go into all the details, they both suck as far as I am concerned, with the Ivy CPU rig being the worse! The Ivy UEFI/BIOS's IMO are not ready for prime time. Even with two PCI-E 3.0 GTX680 cards in SLI, my eyes don't see any real world visual benefit over them running at PCI-E 2.0 on the other mainboard.
    Soon as an ironclad user level procedure is developed that I can restore both primary and secondary chips back to Sandy BIOS's and ME7, I will do so. The Ivy CPU will be sold off. Performance wise, the 2700k is a kickbutt CPU compared to an Ivy on a 6 series chipset mainboard!    

  • MSI z68A-GD80 (g3) "B2" error with ned gtx 970

    Hey.
    Hardware info:
    MSI z68A-GD80 (g3) - Bios version. V18.8
    Intel i5 2500k
    4x4GB kingston hyperX 1600mhz
    MSI 970 gaming g4
    PSU : Seasonic SS-500GB
    My problem is that when I'm trying to install the new GPU i get the error "b2" when i boot. If i chance back to my old gpu (560 ti) or the gpu on the CPU there is no problem. Also i have tested the gtx 970 in another PC and it works.
    After some reseach i found out that i need a bios update. I have tried this but with no luck, cant upgrade bios. I have use "MSI Forum HQ USB Flashing" tools with bios from MSI hp (I choose the (g3) bios) . I can get the bios on the USP stick but when I'm trying to install the new bios i got the error "Bios corruption detected !!" and stopped. I don't know what to do now, i hope that you can help me
    The usp stick is fat32

    I had the exact same problem as the original poster - same motherboard, same old graphics card (560ti) and same new graphics card (970 gaming) and got the same B2 error code and the PC not going beyond that.
    I flashed the bios and that fixed the problem - the exact version I used was on this page:
    Ok, this forum isn't allowing me to post a link to it, but just go to the official page for the motherboard on MSI's website - then click on Support and Service Location, which should open up the list of BIOS upgrades...
    The top one as of writing this is version 19.2
    To do the flashing of the BIOS  you must load the downloaded exe file onto a flash drive and run it from there. Don't worry if it seems like your PC is hanging, it just takes a while (while still in Windows). It then reboots and will finish up flashing the BIOS (you'll see a red bar with the warning on a black background with white text).
    After doing that, my GTX970 GAMING works like an absolute charm! I can now finally enjoy Minecraft like it was meant to be played haha (kidding, I played GTA 5 the whole weekend with EVERYTHING to the absolute MAX!)
    Hope this helps if you are experiencing this extremely annoying error.

  • Z68A-GD80 (G3) bricked?

    hi,
    once again i find my self in need for help, just flashed my z68a-GD80 g3 bios with the lastest bios (J00) from msi page (Bios.exe on a usb key as indicated) and once my system rebooted...well never came to live again... now when i turn it on ALLWAYS black screen, don't even post...
    is my board bricked?
    i've tried clear cmos, with rear button and with the jumper, removed graphic card, removed memory's and allways the same, computer turns on but no screen.
    my computer hardware is the one on my sig

    Give flobelix's recommendations a try, but what in the world possessed you to flash an Ivy Bridge CPU support UEFI/BIOS in the first place?
    For mainboards with a Sandy Bridge CPU, version 18.8 would have been the correct and better choice.
    If nothing works after the CMOS clear and trying with 1 stick of RAM, yes, the board is now a brick. Only way to restore it will be to take it to a pc shop that has an SPI flash programming device, or send it to an MSI Service Center to restore it for you. Be sure to have the secondary chip flashed as well.

  • Z68A-GD80 (B3): "virtu cannot run on this iGPU"

    I have the following system specs:
    Motherboard: MSI Z68A-GD80 (B3), bios 17.5/20120111
    CPU: i7-2600K
    Win 7 x64
    Intel iGPU drivers 15.26.8.64.2696 (latest version for win 7 64)
    2 MSI nvidia GPU cards (1 580 and 1 570) in SLI
    I run folding at home on the graphic cards of this system most of the time when not running graphics intensive programs, and the hit on the system is not so bad most of the time, but after nearly a year of it, I decided to try running the IGPU, so that the system could use that for web browsing, videos etc, while the folding processes could churn away on the discrete GPUs. 
    I enabled i mode in the bios, and loaded an old set of virtu drivers I had downloaded when I first got the MB (1.2.102).  The Virtu control panel loaded without error.  The panel has an update check feature, which I used and then downloaded the most recent version, 1.2.114.  When the system rebooted after the installation, virtu would not run, instead displaying the message "Virtu cannot run on this integrated graphics processor.  Disabling Virtu, and exiting. (Remember to enable Virtu after the problem is fixed.)" 
    What's the problem that I need to fix?  What really puzzles me is that 1.2.102 worked, but 1.2.114 wouldn't. 
    Thanks
    Mark

    Have you retested with 1.2.102 and does that still work ?
    If it does, then I would report the anomaly with the latest driver to Lucidlogix. I don't quite know how to interpret the expanded release notes of Virtu, but one of the known issues with the latest version states:
    Quote
    Known issues in this driver version
    The following are the open issues with current driver release:
    General
     Antivirus and firewall may popup a message box – the user should approve ‘Virtu Control panel’ access the net
     Control panel may flicker when switching between Tabs
    i-Mode (display connected to integrated GPU output)
     3DMark Vantage may crash with FRAPS
     Virtu control panel may show some artifacts when system’s desktop background is configured to Windows Classic theme.
     When Dual GPU optimization (SLI/Crossfire) is enabled, performance may stay unaffected.
    The very last known issue may be the problem 

  • Z68A-GD80 (B3) v20.1 Issue

    Board: MSI Z68A-GD80 (B3)
    Bios: v20.1
    VGA:   MSI N680GTX Twin Frozr 4GD5/OC
    PSU:   Corsair AX850
    CPU: Intel Core i7 2600K
    MEM: 8GB G.SKILL Ripjaws X Series DDR3 1600 PC3-12800 9-9-9-24 (F3-12800CL9D-8GBXL)
    HDD: Western Digital VelociRaptor (300GB, WD3000GLFS)
    COOLER: Noctua NH-D14
    OC: (Turbo)4.7Ghz 1.375CPUV
    OS: Windows 7 64bit Professional
    Hello,
    Since upgrading to BIOS v20.1 on my Z68A-GD80 (B3) I've run into a minor issue.  I've disabled the onboard NICs because I have a PCIe NIC that I use.  When I resume from sleep, the onboard NICs are suddenly enabled.
    This appears to be a bug with the v20.1 BIOS.  I've tried resetting back to factory defaults and clearing the CMOs, to no avail.
    Any ideas?

    Quote from: 87ninefiveone on 26-February-13, 09:34:49
    OP, completely off topic, but at the risk of being so...
    You've got pretty much the same basic system I do. Are you able to OC with your 2600K on that BIOS? I'm running v20.0 and all options to OC are unavailable or AUTO only.
    Yes, I am able to overclock my 2600K with the v20.1 BIOS.  I'm not exactly thrilled with it, though.  In addition to the NIC issue I'm having issues with my sound card as well.  When I play games my friends complain of buzzing noises when using VOIP, which are coming from me.  I never had that issue before v20.1.
    Quote from: Froggy Gremlin on 26-February-13, 17:31:14
    This is one of the rare boards that can be crossflashed using a Z68A-GD80(G3) UEFI/BIOS successfully. This Beta I have linked is outstanding. Further down in the Beta thread, there is also the final release J22 which I have not tried and most likely won't.
    Really?  I may try that BIOS since I'm not very happy with v20.1.
    UPDATE: I flashed to the G3 BIOS v19.2 and the NICs still are enabled when coming out of sleep.  I'm going to test to see if the sound issue still occurs.  I'm not hopeful at this point.
    UPDATE 2: The G3 BIOS v19.2 is no better, unfortunately.  I was able to duplicate the sound issue for the first time and hear what my friends have been complaining about.  When the system has to work there is a "buzzing" noise that is transmitted over the VOIP connection - it sounds like a fly buzzing around.  This happens with the Steam client - I'm going to try Skype now.
    UPDATE 3: Skype is even worse.  The buzzing is continuous whenever I'm in a game.  Is a rollback to v17.5 possible at this point?

  • Getting Z68A-GD80 (G3) to wake up every single day...

    all,
    is there a way to get my PC to boot every single day? I used to be able to do it with a gigabyte mobo, but I don't see the option in my Z68A-GD80 (G3) bios menu (there is RTC alarm, but that seems to be restricted to once a month).
    so, is it possible?
    if not, how can i configure a wake-up event via win7 x64 (as "OS" seems to be an option in the bios for wake-up events?)
    any help much appreciated.

    In the UEFI/BIOS, be sure to disable EuP 2013 (C1E might be the other one to disable along with it).
    Added: Also disable Spread Spectrum.

  • Z68A-GD80 B3 Boot Loop and Failed BIOS LED Flashing

    I've been having "boot loop" issues with my system since it was built in June. Basically, when the system is powered on the lights/fans come on for around 3 seconds then it shuts itself off for another 3 seconds and repeats the loop infinitely. Meanwhile there are no POST code beeps and nothing shows up on screen. I also noticed today that the Dual BIOS control LED is flashing during boot loops indicating that the primary BIOS has failed.
    As this was my first build in quite a while I didn't initially worry about it too much, figuring that it was probably just a BIOS setting or improperly seated hardware issue. Shortly there after my son was born and needless to say there wasn't a whole lot of time to trouble shoot a PC for a couple of months. Fast forward four months later to today and the boot looping is driving me nuts. It seems to occur when the system has been powered down overnight and more frequently if the reset button is used. I've read a lot of stuff saying that the Gigabyte boards are prone to this issue, but can't find anyone else with the same issue on a MSI z68 board. I've check/done the following to try and trouble shoot the issue.
    1. Flash to BIOS 17.3 (twice)
    2. Installed system speaker to hear post codes. Got a whole lot of nothing.
    3. Installed one stick of RAM in slot one. Tried all four sticks. Nothing works.
    4. Set BIOS values to default.
    5. Tried disabling and enabling XMP profiles for the RAM.
    6. Upped the voltage on the RAM to 1.5V, since the board reports an under-volt around 1.48 on auto. No effect.
    7. Disabled PLL overvolt.
    8. Enabled VDroop (still not clear on what this is).
    9. Removed both video cards and used the on chip video. No effect.
    10. Unplugged all USB devices.
    11. Tried XMP enabled and disabled for the memory.
    12. Hard drive plugged in and removed makes no difference.
    13. Bare system with only one stick of RAM installed, no difference.
    11. Lots of other crap that I can't think of right now.
    Any help would be great as I'm at a loss here.
    System specs are as follows;
    Intel 2600K
    Corsair H50 Cooler
    MSI z68a-gd80 B3 with BIOS v 17.3
    PNY Geforce GTX 560 Ti (2x in SLI)
    Linksys Wireless G PCI card
    Crucial Ballistix Sport RAM (4x2GB at 1600 MHz XMP enabled)
    Segate Barracuda 7200 RPM Drive 500GB (2x in RAID0)
    OCZ Vertex2 64 GB SSD as system cache
    Corsair TX750 Power Supply
    Corsair 600t case

    More wierd stuff.
    I couldn't get the board to boot without looping last night, tried the usual unplugging and clearing the CMOS nothing. Boot loops at every turn.
    I wonder if maybe I've got some bad pins or a poor connection on my RAM slots. I removed the RAM and began testing one by one. First stick gave a boot loop. Second stick worked. On restart the BIOS LED wasn't flashing anymore, which is odd since I hadn't yet set the BIOS fix feature to enabled. I powered down again and put my RAM back in, set my BIOS settings as suggested, and then clocked the RAM to 1333MHz. Seemed stable last night through a number of restarts.
    As for the backup BIOS reporting v 17.3. Yeah, that is odd. The manual says it can't be flashed either. Maybe BIOS just reports what the primary version number is no matter which chip (primary or secondary) is actually active and being booted from?
    I'd like to think this is over, but I'm sure when I go home and power up I'll get another boot loop. I'd rather not be without a PC for a couple weeks, but I may just have to RMA so I don't have to deal with this anymore. It's quite frustrating to have fiddle around for 10+ minutes to get your PC up and running, plus with a RAID0 setup and SSD cache I'm just asking for a system failure with all these power on/off cycles.

  • Z68A-GD80 with SandyBridge 2600K with latest MSI Bios flashed dead?

    Dear Community
    I am desparate because I flashed my Z68A-GD80 G3 with the latest firmware 7672vJ2.zip from the MSI website. The update was fine and it completed 100%. However after the final reboot the screens stayed black and also the initial beeping for the usb ports was missing. The blue led was constant and the red led was blinking constantly. I opened my computer and did the JBAT1 reset but no luck. Then I tried to clear CMOS via the reset button on the backpanel. However no luck there as well. I did unplug the graphic card and the pci-e revodrive 3 and tried to boot in a minimal configuration. the screens stayed black.
    I don't know what else to try. At the moment I am super desperate and I am looking for help. Any hints are highly appreciated!

    The BIOS has failed. The only way to recover it is to enable the multi BIOS update. I am not sure if your board has a hard switch for a multi BIOS update or not. If not, then you obviously cannot enable it in the BIOS as you are unable to enter the BIOS. In that case the BIOS chip has to be reprogrammed via a SPI programmer or the board will have to be sent to MSI to get reflashed.
    There is an outside chance that fitting an Ivy CPU may just allow you to get into the BIOS, but I am not convinced as the flashing blue light normally indicates a failed BIOS.
    Remove the battery one more time and do another CMOS clear. Leave the battery out for around 30 mins. Then give it one more try.
    Hope you have a helpful PC shop in your area that may be able to assist with a SPI programmer if needed.

  • Z68A-GD80(G3) Can no longer read external hd dock after flashing beta bios

    I flashed E7672IMS.J31 Beta Bios because I was on a very old bios that was not compatible with my GTX 970 card I just bought.  Flashing the bios fixed my 970 compatibility but in the process made it so my 2 external hd docks no longer worked (at this time on windows 7).  self powered usb harddrives still worked though.  At this time my sata mode was IDE which I thought might have had to do with it since it doesnt have hotswap. I assumed it was an issue with some drivers I installed after flashing the beta bios and I was due for upgrading/reformatting anyways so I enabled AHCI and hot swap then did a clean install of windows 8.1.  The external hard drives still don't read!!   I've used multiple different hard drives and different usb ports including usb 2.0.  The docks are usb 3.0 and I use them daily to edit photos from my work.  Any ideas of things I could try?
    My pc:
    intel 2500k
    16gb Corsair vengeance ram
    MSI 970 GTX GPU
    Corsair 750w power supply
    Z68A-GD80(G3) motherboard
    E7672IMS.J31 Beta Bios

    Could the issue be that I didn't download the Intel Management Driver after installing the beta bios I flashed?  Maybe I could try that first, which one from this list do I use with my pc setup?
    thanks for the help!
    Quote from: flobelix on 20-October-14, 00:38:02
    Try going back to E7672IMS.J20 OFFICIAL. Use the recommended flashing method with provided archive only: https://forum-en.msi.com/index.php?topic=163870.msg1215101#msg1215101

Maybe you are looking for