Z68A-GD80(G3) Beta BIOS Versions For Ivy CPU's

 E7672IMS.J10 ==> E7672IMS.J21
01.Fix vdroop offset control function can't work normally issue and
           modify code to avoid chip bug issue.
   02.Add Gigadevice 25Q64BSIG" SPI ROM support.
   03.Fix Adjusted DRAM Frequency and XMP info incorrect issue when use
           XMP 3000 memory and if XMP 3000 profile is enabled then force run 2800.
        04.Fix Adjusted DRAM Frequency incorrect issue when XMP is enabled and
           set different DRAM frequency.
        05.Fix DRAM frequency incorrect issue when use Patriot PV316G213C1K memory
           and XMP is enabled.
   06.Fix system hang on 0x55 issue when use Team Team-Elite-1866 memory.
        07.Fix system hang on 0x55 issue when use SPD 800MHz memory and
           Sandy Bridge CPU.
   08.improve memory performance.
   09.Add M-Flash support ME FW update solution.
   10.Modify ME shouldn¡¦t be updated if the USB is removed before reboot to BIOS.   
   11.support amp function.
   12.Finetune G.Skill memory command rate timing.
   13.Fix some memory cause bios hang 0x3b or 0x4f when overclock cpu ratio to 42.
   14.Fix the issue that setting item "Command Rate" to 1t causes
           an unnecessary cold reset when bios was postting.
   15.Fix some PCIE card can¡¯t detect issue.
   16.Fixed MSI keyboard ES300MU can't detect.
   17.Set SMLink1 Thermal Reporting Select default to ture.
   18.Fix use usb card reader error issue when update usb 022 module.
        19.Fix OC Genie setting not set to item after OC Genie function enable.
   20.Fix item "Internel PLL Overvoltage" always Enable when over clock cpu ratio.
        21.Set item "Intel C-State" to enabled when use some special cpus (such as i5¨C3475s
      which oc ability are limited) to over clock cpu ratio to the ratio higher than
      the ratio 4 cores can reach at the same time. 
        22.Fix item "Adjust CPU Ratio" show error when adjust cpu ratio.
   23.Fixed PLL function enable caused set tRTL timing hang issue.
   24.Add OC Retry Counter Item.
   25.Fix system hang on 0x55 issue when use single side dual rank memory.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7672IMS.J22====>E7672IMS.J20 OFFICIAL
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!

Similar Messages

  • Z68A-GD80(G3) Beta BIOS Versions For Ivy CPU's (Review)

    Since the release of the original vJ0 Ivy UEFI/BIOS update package, are there any Beta's currently available? Also, if there are any, do they flash both chips as the vJ0 update did or just the primary chip?

    UEFI/BIOS Beta update went without a hitch on the Z68 that has the Ivy in it. The v1.24h flash tool worked perfectly. This Beta version turns the Z68A-GD80(G3)'s into an OC monster with a Sandy or Ivy CPU!
    Without much trouble, had the 3770k at 47X on Auto CPU V. and all power saving features operational and intact, plus the new Corsair Platinum's running two 8GB 2133 kits (not recommended to mix kits) for a total of 16GB's @ 2400 on only 1.632v's. Capable of more CPU speed, but the Ivy's get too darn hot even running a low voltage IMO at full load (85C), and I actually experienced a slight performance loss in 7-Zip at the 47X level. IBT showed less than 2 GFlops gain between 46X and 47X.
    Corsair Dominator Platinum 2133's running at 2400;
    7-Zip 46X VS 47X. 46X and RAM speed 2200 with tight timings (CR 1, 9 10 10 24, tRFC 88), 47X and RAM speed 2400 with relaxed timings.
    Load transition towards 100% and post full load;
    Didn't intend to turn this thread into a review, but so impressed with this particular Beta, had to share what I found.
    This thread may be commandeered by an admin or mod for future use for new Z68A-GD80(G3) Beta's.
    Thanks again Svet for providing this Beta. It is a winner!

  • Which is the latest BIOS version for Satellite L30-113 (PSL 33)?

    Hi everyone,
    Could someone please tell me which is the letest BIOS version for my laptop since I have never upgarde it?
    Also how do I install it and how do I check what is my bios version now?
    Thank you in advance

    First of all the BIOS update is not necessary if your notebook functions correctly.
    But back to your questions;
    On the Toshiba European driver page you will find all available drivers and also the newest available BIOS. At this time it seems to be a 3.10-WIN version
    How to find out the BIOS version?
    This is very easy you have to access the BIOS and then you could see the BIOS version.
    To access the BIOS you have to press the F2 button immediately after notebook was started.
    Ciao

  • Where can I find an old BIOS version for X200

    Hi,
    I am running windows 7 build 7100 on an x200. After updating to BIOS Version 3.05 - 3.06 the system is significant slower. Where can I find the former BIOS version for download?
    In advance thx a lot for support.

    Hi wolfgang285, and welcome to the Lenovo User Community!
    All the BIOS versions which have been released on the web are on the X200 BIOS update page.
    I don't work for Lenovo. I'm a crazy volunteer!

  • Msi z68a-gd80 b3 downgrade bios

    Hi, I have buy mainboard z68a-gd80 but it have bios for ivy bridge ..k00 and I have 2600k cpu sandy b..
     the problem is when I press start button pc get black scren I Press F11 and select setup it restart but not enter on setup config of bios...
    How fix this problem??

    >>Posting Guide<<

  • Worried about bios version for L855D-S511​7

    My bios indicate a version 6.4, yet toshiba support indicated that for my computer the latest is version6.2.  Version 6.4, at least the toshiba support page indicates is for model l845.
    Is there something wrong here?  I ask this because, I cannot seem to boot from an external hdd (usb connected).  This is a linux distro, and the first message I get is something about cannot find efi.  Same is true when I insert a live cd (with fedora 19).
    I tried to update the bios,with the 6.2 version but it would not do it since the bios  version loaded is 6.4.
    Any advice is appreciated.

    Hi Week ends are some times slow on replies. I have no life so I hang around here to much. I'm not sure how much help I'll be, but will give it a shot. I'm sure you know you have to have the boot order set to boot from USB as the first choice. The USB must have a working OS installed on it. I have a seagate 1TB hard drive that I use to put my back up images on and other things. I have a 16GB flash that I have Toshiba recovery media on.If I try to restore with the 16GB USB while the 1TB is plugged in, it refuses to boot because there is no operating system on the 1TB and it won't boot. If I unplug the 1TB and plug in the 16GB USB, it recognizes the USB and will boot to it because it has a OS on it. Having said all this and which you probably already knew, I suggest you go to the Linux forum and ask them what your doing wrong. You will get better replies during the week.
    Dokie!!
    PS This is what Microsoft has to say, which is over my head.
    http://support.microsoft.com/kb/315943
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture48.JPG ‏204 KB

  • H61M-E33 B3 - which BIOS version for i5-3570?

    Hi
    My motherboard is MSI H61M-E33 B3,  I was using i3-2100 CPU, but a friend gave me his old i5-3750,  which is far better. I updated my BIOS with Live Update before I swapped CPU's but I guess that my BIOS version is still wrong for this i5, because when I try to run my PC, it beeps 4 times and reset. So my question is, what is exact BIOS version I need for this CPU to work, and where can I download it? I would be really thankful for any help

    Quote from: HenryW on 18-February-15, 08:03:41
    Does it still work with the 13-2100? Did you clear CMOS after BIOS update?
    Yes, and yes. Works perfectly with i3, and I've cleared CMOS, but it didn't help.
    Quote from: Chike on 18-February-15, 08:06:21
    Go to MB support page and check the compatibility list.
    for the last 2 digits/letters, A=10, B=11, C=12 etc, so A2 will be 10.2
    The problem is, on this page - http://www.msi.com/product/mb/H61ME33_B3.html#hero-overview - On the compatibility tab, my i5 is labeled as "7680vC0.zip" - so i guess BIOS version 12.0 - but on the downloads tab, I see only BIOS 12.3 and 12.2, and the next older one is 10.E :/ Should I download this 12.2 or 12.3 versions?
    When I use my Live Update 6 program, with i3 CPU mounted, it tells me that my BIOS version is A.E0 and it is the latest one, and no need to update.
    I'm really, really confused :P

  • Old BIOS version for 945PL Neo (MS-7236 v2.x)

    Older BIOS files for this board 945PL Neo are not available for download on the website, it's all done through the updater program.  When the bios is upgraded it does not save the old bios for backup, I found out.
    I need to downgrade the BIOS to the board's shipping version.  I unfortunately updated the BIOS to I think it was 5.2 and I need version 5.0.  Upgrading the BIOS screwed up a license key for an application I'm running.  I couldn't have planned a better disaster. 
    Anyone?
    Thank you.
     

    EDIT: i see now
    Quote
    DOS sound: This driver supports DOS sound for VIA VT82C686A/VT82C686B/VT8231 southbridges only. The VIAAUDIO.COM file mentioned in the Readme concerning DOS sound can be obtained from this old audio driver package. It is no longer supplied in the Vinyl_AudioCodec driver package.

  • BETA BIOS Releases for the MSI 870A-G54 Mainboard [MS-7599 PCB v3.1/4.0]

    The latest BETA Release for the MSI 870A-G54 Mainboard is currently: A7599AMS.HE3 [=v17.14b3].
    Changelog:
    A7599AMS.HD0 [v17.13] ---> A7599AMS.HE3 [v17.14b3]
    - Add new bom
    - Fix the raid function fail.
    - Fixed CPU Frequency display error in CPU Specifications.
    - Fixed HDT45TWFK6DGR,HDT65TWFK6DGR,ADX640WFK42GR adjust cpu ratio error.
    - Fixed the current CPU frequency information incorrect in Cell Menu group when update to AGESA Orochi 0.0.7.5.
    - Fixed AM3+ CPU ratio error under CPU-Z information.
    Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results.

    E7676IMS.163 --> E7676IMS.164
    * Adjust Lowest GT Ratio for different CPU.
    * Fix OC menu can't select down(when OC Genie Button Operation Enabled).
    * Fixed clear CMOS POST1 CPU Speed:0*31=0MHz.
    * Fixed Intel SNB Q0 CPU (Q1CX/QAQC) can't boot & S3/S4 fail.
    E7676IMS.164 --> E7676IMS.165
    * Update Memory Initialize Reference Code to version:1.2.2.00
    * Add U-key function support USB3.0
    * Fix the issue when Onboard LAN controller is set to Disabled then PCI LAN option rom does not appear under DOS mode.
    * Hide the item "Super IO Chip".
    E7676IMS.165 --> E7676IMS.166
    * Remove USB3.0 Legacy Mode Support item.
    * Fix Resume From S3/S4/S5 by PS/2 Mouse/KB issue.
    E7676IMS.166 --> E7676IMS.160
    * Release MP BIOS.
    E7676IMS.160 --> E7676IMS.171
    * Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
    * Fixed UKEY compatible issue.
    E7676IMS.171 --> E7676IMS.172
    * Fixed default DRAM voltage incorrect issue when used low voltage memory.
    * In order to unify the spec, Change String "CPU Min.Fan Speed(%)" to "CPU Min.Fan Speed" and change its values(ex: 62.5 -> 62.5%).
    * Remove extra Solution for Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
    * CPU ratio shows 60/61/62/63 in BIOS info area, if "Adjust CPU ratio in OS" is enabled.
    E7676IMS.172 --> E7676IMS.173
    * Fix factory INT15 tool test Hang issue.
    * Fixed the BIOS Setup Green Power group volt information show N/A issue when use User Password.
    * Fixed OS device manager USB 3.0 device show yellow exclamation point when disable USB controller item.
    * Fixed the motherboard needs clear cmos after just can normal boot when under the S3 mode and turn off the Power.
    * Fixed the pcie gen2 speed change to pcie gen1 issue when the S3 resume after.
    Please note that flashing this release occurs entirely at your own risk! >>>Use the MSI HQ Forum USB Flasher<<< 
    Do Not use the BIOS/UEFI integrated M-Flash Routine.

  • Voice chat in Yahoo Messenger beta 2 version for Mac

    I downloaded Yahoo Messenger beta 2 version. I am not able to voice chat with friends like I used to do in a windows PC. My friends say they get an error message while attempting for voice chat. error message that version is different. Could someone please identify the problem and suggest a solution.

    Since Yahoo Messenger is not an Apple product you should look to Yahoo support for answers:
    http://help.yahoo.com/l/us/yahoo/messenger/mac/index.html
    Of since you're friends are the ones who receive the error message, perhaps they should upgrade their messenger.

  • BIOS Versions for MSI 7125

    I have found that my MSI K8N Neo4 Platinum (7125) BIOS seem to be missing some features like DMA settings, whether to cache the BIOS or not, etc.  I found some new beta BIOS at "http://www.techpowerup.com/articles/other/111", but I would like to know what they do before I flash them. 
    There are two versions, the Beta 1.21 released on the 18th of January and the more recent 1.24 released on the 18th of February.  Does anyone know what these BIOS do?

    I am guessing, that you meant I should put this in the BIOS forum?  Or if you had anything else in mind...Please say so!
    BTW, mods please move this to the BIOS thread, if that would be more appropriate.

  • Latest BIOS version for GT60 0NC

    HI
    i was wondering which bios version is the latest for my notebook. i have heard that i need the latest version of BIOS to use Dolby Digital Live on my realtek audio manager.
    my current version is E16F13IMS.30

    Quote from: huy1902 on 31-May-13, 02:23:12
    HI
    i was wondering which bios version is the latest for my notebook. i have heard that i need the latest version of BIOS to use Dolby Digital Live on my realtek audio manager.
    my current version is E16F13IMS.30
    The dolby digital live on the GT60/GT70 is pretty much crap. It only works with 'streams' that actually output it in dolby digital, an will not up-convert audio (ie MP3's and stereo sound) to dolby digital output. It's a very crappy implementation, to be perfectly honest about it.
    If you want a GOOD sound card to output dolby digital audio, I would suggest considering an Asus Xonar U3. They run around $50USD, and will upconvert and will work great with this notebook. It's what I'm currently using.
    Otherwise, the ONLY way to output dolby digital is to get a TOSLINK adapter (goes from a optical stereo connector to a normal optical connector). While they aren't expensive, they still won't get you good sound output from the laptop. I tried it, and went with the Asus Xonar U3 instead.
    It really doesn't have anything to do with the sound card, it's not defective. It's just that is all that it can actually do. There are very few, almost none, out there that can actually upconvert. The Asus Xonar sound cards are one of the few that can.

  • Anymore BIOS Version for CQ40-314TU

    I have an HP Compaq CQ40-314TU and it is using the BIOS version F11C to install Windows XP (Originally, it used  a BIOS version which I didn't know to install Vista). Unfortunately, when I turned it on and used Dxdiag to view the system properties, It showed that the RAM were 986 Mbs (I installed 2x512 MB sticks) due to onboard Intel VGA, I think. When there is Kaspersky Antivirus installed, the startup process costs 4 minutes and there is NO option to adjust the onboard VGA. Is there any other BIOS Version that  I can use to replace the current one? I know for sure that there will be somone in this forum tells me that I should turn off any unnecessary service or program that interfere with the startup process. I have tried all of these but it is useless to do so. Thanks all

    WinFlash for HP Notebook System BIOS - Microsoft Windows-Based
    I guess it means it was specifically created to run alongside Windows...
    altough it says on the underlying description:
    Description:
    This package contains the WinFlash Utility and a System BIOS image for the supported notebook/laptop models and operating systems. The WinFlash Utility is used to locally flash the System BIOS (ROM) on notebooks/laptops operating in a Microsoft Windows Vista Operating System environment.
    and it does only says Vista... I would not recommend doing it on XP... not unless you have got Vista right now, flashed the BIOS then downgrade back to XP... which would be a lot  complicated and long process that you are to take...

  • Requesting Z68A-G45 B3 Beta Bios

    Is there any latest beta bios for this mainboard that up the core voltage limit? I found latest beta bios with 1.50v voltage limit but it is for G3 model only. I can't get stable 4.5-4.6ghz oc with 1.35v limit.

    You probably chose the wrong board if you had Overclocking intentions.
    The budget orientated boards normally are more limited in terms of their capabilities.
    Suggest you contact MSI and ask them if it is even possible to have this incorporated into the BIOS for this board  >>How to contact MSI.<<

  • Minimum bios version for neo2 platinium+venice core?

    What is the oldest bios version that the neo2 require to post with a a64 venice core?

    Quote from: skippy9146 on 13-June-05, 20:42:46
    That'll get the job done!
    May have to order a Venice REAL soon....!
    I had the worst Winchester ever - 3500+,  0437 VPMW, batch#0015, and it couldn't get out of it's own way. It needed 1.52v just for a 200Mhz OC - pathetic. Highest benchable speed was about 2675Mhz, with 1.68v...After getting frustrated enough to do something about, I decided on the 3000+ Venice. All I can say is this &%@#!!* thing is fast! I didn't think I was in for this big of a boost, but I can ride this puppy to 2500Mhz with stock vcore of 1.35 and take it to 2750Mhz totally Prime stable with 1.552v. The dfference is incredible, and not just in benchmarks and games- it just feels faster all around. I was lucky and got a decent OC'er, and the Neo2 helps too   

Maybe you are looking for