Z68MA-ED55 (B3) SSD Caching - hard-drive noise

I have MSI Z68MA-ED55 (B3) with three hard-drives
  (1) Intel 320 Series SSD 40 GB
  (2) Intel 320 Series SSD 120 GB
  (3) Seagate Barracuda 1TB .  
I use the 120 SSD for Windows 7 and programs.  I use the Seagate for storage and games and the 40GB SSD to accelerate the Seagate in Maximized mode (for performance: write to SSD first, and delayed writing to spin disk).  This set up is about a week old.  
I have noticed that the hard-drive makes a clicking noise, very audible, a couple times per 10 minutes.  I suspect that the Z68 SSD caching might doing this.  When I turn off the SSD caching via the Intel Rapid Storage Technology program, the Seagate went 'crazy'  and was clicking every other second for about 1 to 2 minutes while it is unloading the cache.  I have turned SSD caching back on, so far no clicking.
I am concerned about the noise if it comes back.  Anyone have experienced this?

To me, it sounds like a bad disk drive. I would swap out the Seagate before fussing with the SSD.

Similar Messages

  • I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

  • Disharging with USB, Freezing on Sync, Hard Drive noise on Line Out

    I have been dealing with three issues with my 60GB iPod click wheel with color display (Photo).
    The first is something that slowly creeped in, which is hard drive noise that is audible through the line out when the iPod is charging in a dock. I'd like to say it's like a ground loop issue, but it's in my car, on my iHome, and on my apple dock when plugged into power on a stereo system. It sounds like the spinning of the hard drive is correlated to the noise.
    Second, over the past year or so, I've noticed that when I have the iPod plugged into any mac using USB, the iPod discharges. My friend has noticed the same problem on her 40GB 3rd generation iPod. We've tried them on several computers. Firewire connection, no problem, only USB when plugged into a computer, not the power adapter.
    Just recently, the iPod froze up iTunes and the rest of my Mac (G4 MDD Dual 1gHz, OS X 10.4.10, iTunes 7.4.2) during sync. I made reformatted the iPod using Disk Utility, Restored to iPod, making sure to plug into power to finish the restore, then attempted to resync. Two attempts of this and I get the same result, a freeze.
    The first two issues, I've adapted with, but this last one is just frustrating. I will attempt to sync using a firewire cable, but that should not be the solution. This iPod came with a USB cable, it should charge and sync with one. If anyone has any ideas, please let me know. Thank you!

    ok I went here for instruction on how to take it apart since I wasn't having much luck on my own:
    http://www.flexbeta.net/forums/index.php?act=ST&f=20&t=8269
    his tip worked for me so far. hopefully this won't be just a temporary fix:
    Good tip: if your iPod seems dead and the hard drive is throwing errors pull out the connection at the bottom of the ipod mainboard and plug it back in, this will hard reset your ipod and worked a few times for me

  • Hard Drive noise on iMac

    Seems if I tilt the monitor down more the hard drive noise gets louder... Is this a common issue with the new Intel based iMacs? I will have to check but computer was also in sleep mode for awhile so not sure if this still happens... It isn't too loud... but if it says like this it will be annoying...

    Happened today on my new Macbook Pro, 15-inch i7 while editing in final cut. Has happened several times before this, as well. Never had this problem while editing on other computers, including an older Macbook Pro and also a 2.26 Ghz dual Quad Core tower.
    The clip that caused the blowout had the following audio: 16-bit integer (Big Endian), Stereo, 19.2 Khz.
    My sequence settings for audio are currently 16-bit, 48 Khz, Channel grouped.
    Please get around to fixing this, folks at Apple. I work as an editor and I currently can't wear headphones for fear of blowing out my eardrums.

  • Why my Mac Pro hard drive noise and too slow?

    Why my Mac Pro hard drive noise and too slow? Totally 8 gb speed system but now very slow . Please give some suggestions

    Another thing you can do in Lion (and ML) is click on the "Info" button in Disk Utility to get the SMART status of the drive.It's more detailed now than it used to be and it might tell you if something is wrong.
    A lot can go wrong with a hard drive which is why I tend to point people to the downloads section of the following web site:
    http://scsc-online.com
    They have a free hard drive troublleshooting download book there. I reccommend people download that before asking questionis because there are tons of problems that can act like hard drive problems when there's nothing wrong with the system at all. For example, how full is the drive? How many applications are running? What's the status of Spotlight indexing? How many apps are you running? How much memory do you have?
    I could probably think up 20 or 30 more if needed.

  • Is your mpb 17" c2d hard drive noise acceptable?

    I got 17" mbp two days ago, i even couldn't notice the hard drive noise while daily using since I either turned my tv on or playing music. But in the mid night, I have to turn off the TV, trun off the music or at least turn down the volumn, then I noticed that the hard drive noise. While downloading files, or opening some big files, it just sounds scary and horrible, I have the stocked 5400rpm 160GB hitatchi hard drive. Do you guys get the same issue? Is that acceptable?
    btw, I'd use a compaq laptop for 3 years, no that sound at all. Just dont know why Apple couldn't put a quiet hard drive into the mbp.

    Unfortunately not all drives are quiet, or in extreme cases even quiet. There is even variance within the same model drives. The thing is, what you need to determine is what is considered "reasonable". Drive noise, which is normally head chatter (the drive head moving backa and forth) is inevitable and to some degree we all have to live with it.
    If you are truly concerned over the noise your drive makes then I would contact AppleCare and discuss it with them. I had a drive replaced due to noise although that wasn't "head chatter" rather a squealing spindle.

  • My 7th generation ipod classic is making some hard drive noises...it makes me feel so worried that it might be a hard drive issue!

    Please help me and advise if i should be changing my ipod.
    is there any ipod 7th generation that does not make this hard drive noises? or is this the case with all the ipods???
    I'm not feeling well about this issue, as i just noticed while surfing through my songs!

    What you are hearing is the sound of the iPod's internal hard drive spinning up to read data from disk for playback. So basically, what you are hearing is completely normal for the iPod Classic. If you still feel that it is unusually loud, find another person with an iPod Classic and compare them. If your iPod is louder, it could be signs of a faulty/damage drive, but don't be sure quick to jump to conclusions.
    B-rock

  • IMac 2009 (21 inch) making hard drive noises during sleep mode - normal??

    Hi there guys,
    I have an iMac 21 inch (2009) , 3ghz C2D, 4GB Ram, 1TB hard drive (the hard drive was upgraded straight thru apple, when i bought it i paid extra for a 1tb hard drive, its not a DIY hard drive upgrade)
    aniways, I recently noticed that during sleep mode, occasionally (not all the time) I can hear some faint clicking / hard drive noise, which is really weird because i put the imac in sleep mode and it really shouldnt be doing that no?
    My 13 inch macbook pro 2010 never does this in sleep mode, its always dead silent
    Im just wondering if this hard drive accessing / clicking noise during sleep mode is normal in imacs??

    Im just wondering if this hard drive accessing / clicking noise during sleep mode is normal in imacs?
    No it should not be doing anything but sleeping. The SMC controls sleep, try resetting it.
    Reset the SMC
    • Shut down the computer.
    • Detach the computer's power cord.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Reattach the computers power cable.
    • Turn on the computer.
    Dah•veed

  • T420s hard drive noise / speed /battery life trade off and Screen Roll Cage Info

    I know this is a brand new laptop but has anyone over at lenovo spent enough time with both the 7200 rpm and the 5400 rpm version of the 320GB hard drive in this laptop? I am trying to decide between ordering one and would like to get the 7200 rpm but I really dislike hard drive spinning noises in quiet environments. I am currently using the t400 with the 5400 RPM 320Gb drive (which I realize may be different from the drives in the new t420s) and do not find the noise objectionable but would like to get the 7200 in the t420s if there is no noise penalty and very little battery life penalty. Also, does the T420s have a "screen" roll cage like my current T400. I had heard that the T410 did away with the screen roll cages....
    Thank You for any assistance.
    Solved!
    Go to Solution.

    The T420s's rollcage is made of a hybrid carbon fibre reinforced plastic. It's not metal since that interferes with the wireless signal.
    It's apparently a bit better than the one the T510 has right now (which is the same carbon-reinforced plastic)- and the T410, with a "weaker" roll cage, should pass a 1.6 metre drop anyways.
    I can vouch for that plastic's use since you can step on another laptop who's lid (I'm pretty sure it's made from this) is made from that (an old 600E) and it will survive.
    Also, the noise isn't all that different for 5400 RPM vs 7200 RPM. The fan will be louder if you are using it.
    And if you really hate hard drive sound and want a bigger boost than just an RPM bump, consider an SSD. That'll blow any hard drive out of the water in terms of speed, but will do the same to your wallet if you need anything larger than 40-60 GB. And, if you choose to do this, be aware that the T420s only takes SSD's that are 7mm high- so you'll probably need to get an X25-M or Intel 320 to accommodate that.

  • I have formatted my SSD and hard drive.... I am running a clean install from disk of 8.1 pro. I cannot determine if it is a compatibility

    issue or hardware issue. I had run a memory test and scan disk for bad sectors from the bios. As administrator, I enabled automount  in diskpart to allow windows to assign a drive name. 
    From the bios, I can see both drives and only the ssd. I have not pinpointed when the harddisk is unmounted. It is formatted as NTFS. I can hear it unmount either during boot or upon waking from sleep mode. The bios sees no bad sectors nor does windows.
    However, when I had the intel compatibility software installed, my hard drive never mounted. I did a restart and inorder for windows to see my hard drive. I disabled the intel software for the 4th gen i7 processor. This problem is happening less often. I do
    not think I have solved the problem. Intel or Windows... I think a bit of both. 
    If there is a software patch, please guide me to it. I am in school and use my laptop ALL the time. I believe it is a compatibility issue. I have attached this from searching intel's site for downloads and windows is up to date. 
    I am quite concerned because I can hear my harddrive unmount. It is labeled as healthy NTFS partition. I have checked for hidden volumes and done everything I know to do to check the integrity of the hardware as administrator. I have searched microsofts
    libraries and forums and have done everything I can find as suggestions. 
    I have checked for malware, viruses, etc. My only clue this is going to happen is the hard disk spins up and I hear the fan, then I hear it unmount the drive. Of course, after unmounted there are other issues which I have ruled out as the cause of the problem.
    Basically, I am experiencing a lack of swap space after my hard drive unmounts.
    Any suggestions, are welcome! I would really like to know if this is a known windows issue. I should not have to disable intel's processor software. I paid for the features of the i7 and would like to utilise the processor.

    Hi,
    According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
    Roger Lu
    TechNet Community Support

  • 27" iMac processor / hard drive noise

    I just picked up a 27" iMac with the 1 T HD. I can hear the hard drive any time the computer is "working". Took the first one back to the Apple store and exchanged it, thinking I had a defective machine. The replacement makes the same noise.
    Anyone else having this issue? Are these things supposed to be this noisy?

    Same problem with my iMac 27" C2D 3.33 with a ST31000528ASQ HDD.
    Always working, but no Spotlight indexing and Activity Monitor reports no activity.
    Every 5 or 10 seconds, there's write or a read.
    Very annoying.
    Any idea?

  • Windows 8 will not activate with new SSD (second) hard drive

    I added a new SSD drive in the second hard drive bay. I used the HP restoration media to install Windows 8 on the new SSD drive. Windows 8 will not activate. After spending 90 minutes on the phone with HP support (and paying $150), they told me to contact Microsoft. After spending some time with Microsoft, they told me that the Windows product key is being locked by HP, and there is nothing they can do.

    Hi badgerbuzz,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Regards,
    George
    I work for HP

  • Hard drive noises on new MBP

    Hi everyone,
    I just got my new macbook pro a few days ago and I'm loving it!
    But unfortunately, the harddrive seems to be making some odd noises in response to movement.
    For example, while my laptop is on my lap and I remove my hands (causing the machine to move upward) and then put my hands back down on the machine again, sometimes I hear a clicking coming out from the (I presume) harddrive.
    From the best that I can tell, it seems the noise is coming from the right half by the trackpad, which further fuels my belief that it's the harddrive.
    Now, I'm not sure if it's a bad thing or not. It's not a constant noise, but it's in response to movements. My guess is it might just be the sudden motion detector playing it safe, but I'm not sure.
    Has anyone else come across this? I just want to make sure it's not a problem I have to worry about.
    Thanks,
    Matt

    That is the sudden motion sensor, which parks the hard drive if it detects a potential fall.
    That is a good thing, and it means that your computer is working perfectly!

  • Hard drive noise -- slow computer

    Hi folks. If anyone can give some advice that would be great.
    My hard drive seems to be acting up. Every so often (probably 4 five-minute periods in 3 hours of use per day) I'll hear loud noises coming from the hard drive (a series of "grrrrs," "beeps," and "clicks") and when that happens, the computer will freeze, pinwheel/beachball will appear and I won't be able to do anything on the computer for a couple minutes.
    I took my issue to the genius bar, they ran some tests, said it wasn't a hardware problem (therefore hard drive is ok physically) and did something to fix some problems in the hard drive. For a few days after, everything seemed to be working fine but now the problem has returned.
    The only programs I have run since then are Safari, Firefox (which is always slow), MSN Messenger, iChat and MS Word.
    When I go to the Disk Utility, the "Repair Disk" button is not clickable.
    Any ideas?
    Thanks.

    First, in order to run repair disk, you need to boot from your OS X disc, since you can't repair a drive you've booted from. Insert the first OS X disk that came with your system, and holding the C key down, reboot (boots from the OS X disc). Choose disk utility from the menu bar, and you can run repair disk.
    When you bring up disk utility, does the S.M.A.R.T. status say verified? I use a utility called smartreporter which provides a SMART status on the menu bar. This may give you warning before a hard drive failure. It's at http://www.apple.com/downloads/macosx/systemdiskutilities/smartreporter.html
    You can use a utility like OnyX to clean things up on your hard drive. It's available from http://www.titanium.free.fr/pgs2/english/download.html . Use the cleaning and maintenance tabs.
    Difficult to say if you're hard drive is in fact on it's last legs, or if there is a fundamental issue with the data or indices on the hard drive. A utility like TechTool Pro or Disk Warrior can do things that Apple's Disk Utility can't do, in terms of analyzing and fixing issues on the hard drive. That might be worthwhile also.

  • IMac  with SSD and Hard drive very slow startup time

    I have a new mid 2011 iMac with a 250gb SSD drive and a 2TB drive. All are from Apple as BTO options. When I first used the iMac my typical startup time from the hardware check chime to desktop was typically 12 seconds. Something, somehow has been changed because now it takes over one minute to boot up from the SSD. After the chime I hear the fans running and also the 2tb drive.  After about 20 seconds I hear the hard drive spin down and then after another 20 seconds it starts up again. Once it starts up the boot up sequences contiunes and returns to the desktop. After this the iMac perfprms as normal. I have tried running disk utility from the recovery partition. I have also reinstalled Lion as well from the recovery partition and neither of these change the outcome.
    When I first got the iMac I used time machine to restore from a previous machine into the 2tb partition and then went into advanced options in System preferences>Users&Groups to point to my home folder on the 2Tb drive rather than the default one on the SSD. That was working fine until I discovered software problems with both Preview and Textedit where they would not start up with this arangement. I then repointed my home folder to the default one on the SSD which cured this issue with these programmes leaving my data remaining on the 2Tb drive. Since doing this I have had the one minute boot up problem.
    Can anyone offer any advice as to how I may overcome this problem and get my iMac back to starting up in twelve seconds from the SSD as it did before.  Any help would be appreciated on this topic.
    Thanks.

    Where do you maintain your Home folder - on the SSD or on the HDD?
    If you want to do a clean install (from scratch) then do the following:
    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
    Before you go to the extreme of the above would you do this:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Just in case your system slowness is due to something eating up CPU time. Oh, and if your system is brand new check the upper right corner of the menubar for a "dot" inside the Spotlight glass. This means Spotlight is indexing the drive. Until it finishes your system will be quite sluggish.

Maybe you are looking for