Z77-GD55 not posting after Win8 Update

Hi folks,
i´m in need of help as i am done with my knowledge here. After i updated my PC to Win8  it sometimes didn´t boot up. After 4x-8x restarting unplugging etc it went back to working normal. Today it got stuck in a boot loop. Before the update i swapped the memory sticks into different banks, as otherwise the heatsink wouldn´t fit, so now they are sitting in bank 2 and 4. Besides that the Soundcard went from the uper PCIe slot in one of the lower ones. I already tried swapping memory modules, disconnetcing all devices, unplugging GPU, HDD, and the Sound Card. Result so far is either a boot loop, meaning the PC seemingly powers up, all vents running and then restarts or inbetween i got a 3x times beep. Now i´m cluelesse.
Any ideas ?
Thanks a lot !!

Quote from: Bernhard on 20-February-14, 18:01:34
Strange analysis and assumption indeed.
You had a working board. You load the OS and now it doesn't work. The only known change was the OS.
With Win8 not being able to write and embed its serial key to the BIOS, I wouldn't be surprised if that caused BIOS corruption.
I think he indicated that he broke it trying to fix this issue. It just wouldn't load the OS then he re-seated everything and it boot looped.

Similar Messages

  • C1-01 not working after Nokia update

    Hi,
    C1-01 not working after Nokia update.
    Message shows "Updating" then blank screen, any ideas?

    How did you start the update? OTA or using Nokia Suite?
    Try to run the update through Nokia Suite again.
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • Mic Jack not working after Driver Update, Console unavailable, can't install

    LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
    I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
    I'm running on Windows Vista Ultimate, 64-bit
    My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
    I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
    Any help would be greatly appreciated.
    I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

    Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

  • Usb hard drive not loading after security update

    usb hard drive not loading after security update
    I can't seem to find any other posts about this problem.
    I have three external hard rives connect by a USB hub to my iMac.
    Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly. 
    I get the same issue but not all the time if I turn them on before I boot the iMac.
    I used the disk drive utility to "repair" the drives but they always come back as "probably ok". 
    If I restart the iMac with the drives connected (on), it seems to work but not all the time.
    A bit annoying as I am wondering if the drives are OK or not.
    I don't always need the drives as they are for backing up images from my camera using Apreture.
    This all began after i did the latest security update.
    is the update to blame?
    mahalo.

    Yes, you can still use those instructions to reset the PRAM.
    You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
    Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Aperture crashed and will not open after last update.  Anyone else have this problem?

    Aperture crashed and will not open after last update.  Anyone else have this problem?

    Yes.  See this very forum for 50 threads on it, that explain the solution.

  • 1080p videos not working after fp2 update

    some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks

    What is the phone model?
    Could you give us the url to the video on question?

  • Facebook birthdays not working after ios7 update

    Facebook birthdays not working after ios7 update?

    Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
    Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection. 

  • MAC Mini does not restart after Yosemite update

    I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems.  I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
    Any help or ideas appreciated 
    Larry

    Okay, this is strange.  I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%.  I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
    Larry

  • Why is my iPhone 4 not ringing after iOs7 update?

    Why is my iPhone 4 not ringing after iOs7 update?
    I checked volume on side & n settings & rebooted

    Hello there Tgurnell
    Thank you for using Apple Support Communities.
    It sounds like the ringer is not ringing after the update to iOS 7.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Sterling

  • Airport not working after osx update-keychain?

    Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
    "Confirm Application Change
    Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
    This chain is permanent and affects all keychain items used by aiport.
    Don't Change Change All
    What should I have replied? Anyway to reset the airport or download it again?
    Thanks.
    Anyway to reset this or download again? Thanks.

    What should I have replied?
    Change All

Maybe you are looking for

  • Printer memory error

    When I try to print an XML Publisher report directly to a printer from the EBusiness Suite, I get the following error: PDF Status page PDF file not printed. 128 MB of memory is required to enable direct PDF printing. Does this mean that I need to inc

  • Trying to install acrobat on windows vista 64-bit

    I just purchased acrobat and i'm told that it can't be installed on this sytem wondows vista 64bit, service pack 1, system will now terminate. what do I do?

  • DVR Search Option No Longer Works - After The Crap Upgrade

    The new software upgrade is crap. DVR search option no longer works. I can't use the search option to find my favorite programs and set the DVR to record them. It only lets me put the first letter in the search field and then nothing. I can't enter a

  • How to import 2 users in a single import command?

    I created 3 users in a tablespace & exported 2 users seperately. How would i then import 2 users in a single import command? I also tried exporting both the users to a single dump file ,both the users & its tables were exported successfully without a

  • Very specfic and odd network issue

    Connected via my wireless network, this site: http://wiki.contextgarden.net will not load via any browser (Firefox, IE, Safari, wget). Connected via ethernet, it loads fine. All virtual machines (windows) on the MBP also fail to load the page over wi