Z77 GD65 Have I broken my power on jumper pins?

Hey,
So I bought a new case and I swapped everything and was struggling with the jumper cables and i think I bent a few of them in the process. Anyway, no biggie i thought I straightened them out and plugged only the power jumper cable. I press the power button and nothing happens and I assumed I got the positive/negative mixed up so I flipped the cable around and still nothing. My old case had a very long jumper cable so I plug that in press the button on the old case and still nothing. Try shorting it out with a screwdriver, nothing. Power on using the button on the motherboard and everything seems to be working the way it should.
So is it safe to assume that they are broken? If so how? Arent they just pins or is there more to it than that. Also what are my options now apart from opening up the side of the case every single time I want to power on or using WOL?

If you can not manage to repair the MB you can run the case switch wires to the PSU 24 pin plug. One way or another splice 1 wire from case power switch to pin 16 (it's the only green wire in the plug), the other case switch wire to one of the ground wires (black, doesn't mater which one you use). It doesn't matter what wire from the case switch goes to the PSU wires as it's an isolated loop between the switch and the 2 wires on the PSU so the polarity markings on switch wires the don't matter at all and can be ignored.
Best way to do it would be to get piece of wire the right size to fit the plugs from the switch, cut long enough to jam into the plug from PSU so it makes contact with the wire connector and then secure the switch wires to the PSU wires with tape or wire ties so they don't come lose. Doing it the way you won't void any warranty on your PSU. If no worry about PSU warranty then you simply splice the wires together and insulate splices with tape.

Similar Messages

My iPhone 3GS keeps turning itself off all the time for no reason every time I put it on silent or just get a Facebook message I have a broken sleep/power button anyone know how to fix this problem?

My iPhone 3GS keeps turning itself off all the time the power/sleep button dosent work so it's quiet annoying having to plug it in all the time dose anyone have a fix for this?

The "fix" is to get the phone repaired. There's no magic solution for a broken phone.
Bring your phone ant $149 to Apple for an out of warranty replacement, or find a 3rd party repair shop near you.

My iphone 5 power button doesn't always work. I have heard this is an issue and Apple will replace it if under warranty, but I have a broken screen. Will they still replace it?

My iphone 5 power button doesn't always work. I have heard this is an issue and Apple will replace it if under warranty, but I have a broken screen. Will they still replace it?

It is unlikely but you can atleast try they might set it up for free but expect an email about paying 269 for physical damage

Hi, my iphone 5 is broken the power switch. I've had it for about 10 months. Where can I send it to have it repaired?

Hi, my iPhone 5 is broken th power switch. I've had it for about 10 months. Where can I send it to have it repaired?

contact apple for warranty repair / replacement

MSI Z77-GD65 - 0.00 GHz in BIOS - boot looping

Hello, I have motherboard MSI Z77-GD65, CPU i5 3570K, 12GB KIT Corsair Venegeance.
1. I turned on PC by poweron button, PC starting 1-2 seconds, than power off and after again it power on and normaly starting to Windows 7 x64. This happens with every start PC.
2. In BIOS show Current CPU Frequency 0.00 GHz (34 x 0 MHz). In Control Center iis also 0.00 GHz and 0 MHz BCLK. Why? What is problem?

Quote from: Froggy Gremlin on 14-October-12, 16:55:57
Typo error?
12GB KIT (3 x 4 GB), One stick of Kit shows errors tested in Memtest86+ v4.2. This one I disposed, but problem is still
Quote from: Froggy Gremlin on 14-October-12, 16:55:57
Have you tested with just RAM stick in the primary DIMM slot? Tested each stick individually?
I tested each stick individually. Each in DIMM 1.
Quote from: Froggy Gremlin on 14-October-12, 16:55:57
Double check the PSU 8-pin CPU power and the mainboard 24-pin power cords are secure to the board.
I checked, Its Ok.

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!

Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

Power adapter male pin BROKEN

My son called today with power adapter problems...took awhile for me to figure it out, but the tip of the adapter pin has apparently broken off inside the computers female power port. (the pin is flush with the metal collar while it protrudes about 1/8" on mine) I think it must have broken at the insulation.
If he's very careful, he says he can get the pin in and the battery still apparently charges but the light is always green.
How can he get the broken piece out of the computer and is there a replacement part for just the power jack??

Getting the stuck pin tip out of the computer is tricky. I have heard of people putting a drop of superglue on a thin object (like a nail) and inserting it into the hole, hoping to glue the nail to the pin without getting it on anything else.
I once removed a pintip that was loose in the jack by making a fine wire into a soldering iron tip, then quickly touching the pintip with a glob of solder then turning off the heat. It stuck and I pulled it out. I just didn't have any glue handy.
If you cannot get the tip out, you are likely looking at replacing the DC input board. Also, I have not seen replacement power plugs, so if you cannot fabricate from used adapters, you probably have to get a new power adapter.

Y apple hurting Coustmer be a days I think boz of iphone5s sale s very much now a days in India Apple is doing very bad I have a problem in power button n der s dent mark apple s saying tat is physical damage n u should go for paid replacement tat amount

C Iam using iPhone 5 64gb but I was having a problem wit my power button it sunk little inside n one problem frm my side s I have 2dent marks on d phone but when I went 2 service center dey told me to contact apple toll free number when I spoke wit dem dey people told me tat is phiscyal damage it won't coverd under warranty u should pay n replace I asked store people wats d charge fr paid replaced fr iPhone dey told me 20,000
My question s :y should I pay so much fr dent I have nt broken screen or not dropped my phone in water only fr dent mark dey r not servicing my iPhone c if dey could have asked me 1000 I could have paid fr dent chargers it very much upsetting me
C I wanna sell d phone to apple I don't wanna use iPhone

B Sandeep wrote:
Mr.varjak paw wann tell u something k before iphone5s released apple used to replace a dent mark phone at tat time it was not a phiscyal damage now apple s telling tat d dent mark is physical damage
No, that has never been the case. Apple has always by official policy declared that dents constituted user-caused damage, as they most certainly are, and therefore voided the warranty.
In any case, you've been given the facts. The damage to your iPhone has voided the warranty. So you can either pay for a replacement, or you can sell your damaged iPhone for whatever price you can get for it and go buy something else. There's nothing else anyone here can tell you.
Regards.

OC on my 3770k [Z77-GD65]

Ok so i wanted to get more than 4.5ghz from my CPU (using Z77-GD65 mobo, and 10.10 BIOS).
Settings
multiplier 47
all power savings disabled (c-states, C1E, EIST, turbo boost, Overspeed protection)
vcore: 1.25(tried 1.27 as well)
digital compensation level: high
vdroop: auto
internal pll overvoltage enabled
As soon as i reboot into windows, i get WHEA errors from the start, in event viewer, and prime95 crashes in 2 seconds !
Must ask !!
What's CPU OCP expander, and CPU I/O voltage ?
I've set OCP expander to Enhanced, and I/O voltage to 1.11v
its that ok ?
I mean how to play with I/O voltage ? Leave it default at 1.05 or mess with it ?

Hello Calin long time no see you in here and OCN ^_^
Btw I see your signature with 3770K @4.5GHz that needs 1.22volt, is it stable? If so I think for 4.6GHz you might need 1.27volt and then 4.7GHz perhaps you need 1.32volt. I usually used +0.05volt between clock to another clock.
You may try first at 1.30volt for 4.7GHz and test it with Cinebench R15, Hyperpi32MB, 3Dmark 2011.
For CPU I/O just leave it Auto if you use stock RAM speed (1333 - 1600MHz) and if you OC your RAM it will needs add volt, like 1866MHz or 2133MHz needs 1.100 - 1.150volt. Sometimes 2133MHz needs 1.20 - 1.25volt.

Z77-GD65 no display (MSI 770 TF)

Hi! I just recently bought a new video card, an MSI GTX770 TF 2GB, installed it and got a dE error code. It does not exist in the manual and I do not have any idea what this is. The video card works on my brother's PC with the exact same configuration. What is going on here. Can anybody please tell me?
Regards,
Ryan

Board: MSI Z77-GD65
Bios: Version 1.0
VGA: MSI 770GTX TF
PSU: Corsair HX750
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
MEM: Corsair Dominator 16GB
HDD: Western Digital WD Black WD1002FAEX 1TB
COOLER: Corsair H100
OC: None
OS: Windows 7 64bit Professional
I've tried the same card on my brothers PC and it works.
It works when I put back my old card, an MSI 560ti. I had to switch to my old card to flash the BIOS because I only get a blank screen or no signal when I use the new 770GTX.
We have the same configuration but the BIOS settings. He has 10.6 and I have 10.11
Tried flashing to 10.6 but still getting the DE code
Tried flashing version 10.8, 10.10 and 10.11

I have a broken laptop on which my itunes library is stored on, i have set up another on my new laptop but can not update my ipod without erasing all my music, how do i get around this?

I have a broken laptop which I can not get into on which my itunes library is stored, I have set up another library on my new laptop but I can not add tunes etc., without sync and erasing because you can only be registered to one library, how do I get around not having to start all over again putting music on my ipod, and spending loads more money downloading, I have the 1st generation ipod nano
many thanks

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

My Power Mac G5 is freezing up. A few days ago my G5 started freezing up, the cursor is unresponsive and none of the keys have any use. I have to press the power button to shut down and then restart. Sometimes on the restart, instead of the Apple logo I g

A few days ago my G5 started to freeze up while in use. It doesn't matter if in Safari, iTunes, Pages, etc. The cursor will not respond nor does any keystroke, force quit, escape, etc. I have to hold the power button down to shut the computer down. Then, try to restart. Sometimes restart will work and the computer will work for a while and then freeze again. Other times on restart, instead of the Apple logo at start up, I get a Zero with a line thru it, have to power off and restart again. When it does restart, the "spinning gear" takes a lot longer than normal to spin up and take me to the login screen. Have been told it may be my hard drive getting ready to fail. Have looked at disk utilities, S.M.A.R.T looks fine, "verified" and have verified disk, and repaired permissions. In case it is the hard drive, I bought external hard drive and hooked it up to Time Machine. The backing up to a long time, overnight, about 10 hours because it kept freexing up and I would have to shut down and try restarting again. Finally got everything backed up.
Any help or suggestions greatly appreciated!!! Could it be my hard drive is dying? Is the the normal chain of events or is it something else???

Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

I still have a mac mini power pc g4 that is perfectly good in use at my business. i have upgraded my mobileme on my other macs. is it so that i will no longer be able to sync to mobileme on this mini?

I still have a mac mini power pc g4 (os 10.4.11) that is perfectly good in use at my business. I have upgraded my mobileme on my other macs (mini using 10.6.3 & macbook pro using 10.5.8). Is it correct that I will no longer be able to sync to mobileme on this mini?

I personally use IX Webhosting for a couple of reasons:
Fast reliable personal tech support by phone, instant chat, & email
They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
And, price they are very reasonable plans start @ $3.95 USD a month
http://jeffnitschke.com/IXWebHosting.html

I have been able to wake my macmini by hitting the space bar - but since installing 10.7.4 using the 1.4Gb combo this wake method no longer works. Now the macmini shuts down, and I have to switch mains power off and on again before powering up the macmini

Since purchase of my macmini (2011 model) I have been able to wake it from sleep by hitting the (wired) keyboard space bar.
However, I recently updated the OS to 10.7.4 using the combo (1.4Gb) update, since when I cannot wake the macmini in that way.
Now, after putting the macmini to sleep, pressing the spacebar causes it to shut down.
I then have to switch mains power off and on again at the wall socket, after which the macmini starts up from shutdown condition.
I am by no means an expert, and have not been fiddling with settings, so I am in need of advice on what could need resetting to allow me to return to the previous simple 'wake up' approach!
Thanks.

Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Followed by resetting the PRAM > Resetting your Mac's PRAM and NVRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then if those do not fix the problem, you may need to reset your Energy Saver and Keyboard Preferences by readjusting them.

HT3302 My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Z77 GD65 Have I broken my power on jumper pins?

Similar Messages

Maybe you are looking for