Z77-GD80 cannot wake up after BIOS update

Anyone else having this problem? Any ways to fix it?
Thanks.

Quote from: xmad on 18-July-12, 06:23:52
Flash back to the previous version. Like I said, I had the same issue with version 1.1 although not to the level you did.
Instead of flashing back, I switched to the other BIOS. Beauty of a dual-BIOS system And the OC genius works, and the system wakes up. They certainly messed something up in the update!
Quote
Please report your problem though:
>>How to contact MSI.<<
As I wrote above, I did already, and you can see what they suggested. Incompetence is not uncommon in tech-supports
Quote
Also, try to disable xmp and re-apply OC Genie. I am curious if it will work. If it does, let us know more info about your system perhaps there is a config error. >>Posting Guide<<
I played with it, trying a bunch of different things, and even if I tried manual OC, it would not wake up. Only the default and Eco settings allowed wake up.
BTW, I noticed that MSI lists the 1.1 BIOS update as
- Support CPU ratio setting by keyboard function.
- Improved memory compatibility.
- Improved gaming mouse & keyboard compatibility.
but if you look under Thuınderbolt settings, you'll see a bunch of new options in 1.1. So, 1.1 is not only about these three things they list, and they clearly messed something up regarding wake up, as I said.

Similar Messages

Cannot wake up after screen goes black occasionally since update to maverick

Cannot wake up after screen goes black occasionally since update to maverick. I have to wait a few mintues and press power button to restart. Any one has similar issue?

I've found the problem!!
Mavericks for some reason overheats the GPU.
I downloaded a free 3 day trial of Temperature Gauge Pro http://www.tunabellysoftware.com/tgpro/
It showed a GPU 0 diode temperature of 122 degrres C. I think that's about 250 degrees Farenhiet. Insanely hot. No wonder the poor thing was crapping out. TGP alows fan control and so I set them to maximum and watched the temp come down quickly.
After all these months of frustration it turned out to be a simple fix. So I bought the program for $10. Sure a lot cheaper than having the Apple Experts replace a GPU or CPU like some have sugested.
What I still can't figure out is why Apple won't fix the problem from thier end and just update the fan parameters on Mavericks.

Mac Mini 2014 Oct cannot wake up after sleep

Mac Mini 2014 Oct Version, cannot wake up after sleep by typing on keyboard or moving mouse (both hardwired USB) if external HDMI screen goes to sleep mode too (usually after 1 min if no signal coming from the MAC). To wake up, I ust turn off and turn on the screen and keep typing on the keyboard. I already checked "prevent computer from sleeping if display goes to sleep". But does not help. This is very annoying. I now try to set the sleep timer to more than 1 hour. Wasting my energy and not helping. I tried connecting my HDMI screen to a HDMI to mini-Display port adaptor cable, then plug into the thunderbolt port of the MAC. Same issue, no improvement.

I may know whats going on with the wake from sleep issue. I have a Mac Mini 2012 but this fix (see below) should work on any product running 10.8.2 Mine is at 10.10.1 and it worked.   First off you can tell if your Mac Mini is in sleep mode by looking at the small light on the front of the Mini. If its pulsing... going from bright to dim its in sleep mode. If you put your Mac in sleep mode, or it goes into sleep mode it will wake from sleep BUT ONLY for the first 4 hours. After 4 hours it will go into what is known as "safe sleep". The light on the front will be off and you won't be able to wake your Mac. The only way to wake the Mac when in safe sleep is to hit the power button and then wait a minute or longer as your system will need to pull the data from the disk and load to ram. This is causing the issue where its not waking from sleep. You can move your mouse or hit the keys all you want but it won't wake from sleep. This is a real pain as you have to press the power button on the back of the Mac mini and wait for the system to come out of its slumber.   Here's what Apple says:
With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices. This is normal behavior for the following models:
MacBook Pro (Mid 2012 and later)
MacBook Pro (Retina, Mid 2012 and later)
MacBook Air (Mid 2012 and later)
iMac (Late 2012 and later)
Mac mini (Late 2012 and later)
I have found a fix that puts an end to this nonsense..... Go to the Mac terminal (Google if you don't know how or youtube) and run the following commands (Very easy to do and if a novice like my self can do you can for sure)
1. When in the terminal mode type:
pmset -g          This will show your current configuration of your sleep, hibernate, etc You may want to print so you can restore these values if needed.
2. Change your standbydelay to 86400    86400 is number of seconds which is 24 hours. Here’s the command:
sudo pmset -a standbydelay 86400
3. Change autopoweroffdelay to 86400 Here’s the command:
sudo pmset -a autopoweroffdelay 86400
4. At last but not least change autopoweroff to 0   Here’s the command:
sudo pmset -a autopoweroff 0
Run pmset -g to verify your setting have changed. I rebooted my system and checked again to make sure. Since I made the changes no more going into Safe sleep!!! You can change the values to what you like. I used 86400 secs. (24 hours) I hope this helps!

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Cannot activate iMessage after iOS update.

Cannot activate iMessage after iOS update. "Activation unsuccessful" I cannot activate it.

Have you updated your iOS to 5.1? Just confirming as it says "iPhone 4S, iOS 5.0.1" in your thread.
Double check if you have credit in your mobile in order to activate iMessage.
Turn iMessage off and on again, than turn off your phone (long press display off and on button) and slide to turn off. Turn your phone back on, enter your "Apple I.D" in the iMessage window and wait till it verifies everything.
Tell us if it solves the issue.

IPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

iPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

Hi! It seems you found a bug on iOS 7.1
To disable Voice dials try this, (I saw in an iPhone website here in Brazil):
1. Turn on Siri (settings > General > Siri)
2. go to (Settings >Passcode > Voice Dial) trust me, it appears now
3. disable Voice Dial
4. go back and disable Siri
hope this could help you!!

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

After bios update side nomberpad is not workinh keys from 0-9

after bios update side nomberpad is not workinh keys from 0-9

Hello jay04,
Welcome to the HP Forums!
I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Thanks!
Mario
I worked on behalf of HP.

Z77-GD80 cannot wake up after BIOS update

Similar Messages

Maybe you are looking for