Z77 mpower and windows 8.1 enterprise: 5.1 sound not working

Hi All!
Help me please!
I install windows 8.1 Enterprise. My audio only work in stereo. My home cinema is connected my PC, (previous OS: win7 Enterprise: audio is work in 5.1) My cinema is testing: work in 5.1 .
PC realtek audio not working, only 2.0
what can i doing?
newest drivers in installed.
Help me please!

I've the same problem with my Z87-G45.
The button "fill speakers" in the last Realtek 1150 driver simply doesn't work at all.
It perfectly works Under Windows 8.1 drivers, but I can not correct my room with Windows driver.
Please could you help us or fix it ?
Thanks

Similar Messages

IMac running Windows 8 DP through Bootcamp. Sound not working on Windows!

I have just installed Windows 8 Developer Preview through Bootcamp on my iMac 12,1 running Lion. It's working except for the fact that the audio doesn't work! Even if the volume in Windows is turned to 100%, there is no sound coming out of the speakers! Are there any drivers I can install or anything like that?
Please help me

Alex Hutu wrote:
I have just installed Windows 8 Developer Preview through Bootcamp on my iMac 12,1 running Lion. It's working except for the fact that the audio doesn't work! Even if the volume in Windows is turned to 100%, there is no sound coming out of the speakers! Are there any drivers I can install or anything like that?
Please help me
Use the Win7 drivers from the BCA download.

CHKDSK v6.2.9200.16384 dichotomy between Windows 12 Server x64 Standard Build 9200 and Windows 8.1 Enterprise x64

I seem to have discovered a dichotomy between the ability of CHKDSK v6.2.9200.16384 to detect and repair an external NTFS drive, when executed on Windows 2012 Server Standard Build 9200 x64 and Windows 8.1 Enterprise x64. There should be no difference in executing
the same application between these two systems.
Even though both are 64-bit systems, and both are up to date, and both are running the same version of chkdsk, chkdsk on Windows 12 Server was UNABLE to detect an NTFS filesystem on an external WD 1TB USB drive (detected fs as RAW), while chkdsk on Windows
8.1 Enterprise WAS ABLE to detect the NTFS filesystem on the same external drive, and was able to repair it.
So, what is the difference between these two systems? Why should the same version of
any application yield different results between these systems?
The only result on Windows 2012 Server was:
C:\Windows\system32>chkdsk /x /f M:
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
The result on Windows 8.1 Enterprise was:
Log Name:      Application
Source:        Chkdsk
Date:          11/26/2014 8:10:05 AM
Event ID:      26214
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      James-HP
Description:
Chkdsk was executed in read/write mode.
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
    234756 KB in 42 files.
       176 KB in 26 indexes.
    153755 KB in use by the system.
     65536 KB occupied by the log file.
976371120 KB available on disk.
      4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Chkdsk" />
    <EventID Qualifiers="0">26214</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-26T13:10:05.000000000Z" />
    <EventRecordID>11361</EventRecordID>
    <Channel>Application</Channel>
    <Computer>James-HP</Computer>
    <Security />
</System>
<EventData>
    <Data>
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
    234756 KB in 42 files.
       176 KB in 26 indexes.
    153755 KB in use by the system.
     65536 KB occupied by the log file.
976371120 KB available on disk.
      4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
</Data>
    <Binary>7AE2000050000000550000000000000004000000000000000000000000000000</Binary>
</EventData>
</Event>

Hi,
Please check if the Windows Server 2012 is still UNABLE to detect the external NTFS drive after attach the drive from the Windows 8.1 back to the Windows Server 2012.
A RAW filesystem simply means that it is a filesystem that is not recognized by Windows. The most common cause of external hard drives suddenly becoming RAW drives is if they are disconnected from a computer without using the “Safely Remove Hardware” option.
You can use the Dskprobe tool (Dskprobe.exe) to make repairs to check it the issue still exist on the Windows Server 2012.
What is this Raw File System
http://blogs.technet.com/b/ganand/archive/2008/02/22/what-is-this-raw-file-system.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Sound not working Notebook Envy 15 TS windows 8 and windows 8.1 - problem continues

Hello,
My computer sound stopped again.
I posted previously:
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Sound-not-working-Notebook-Envy-15-TS-windo...
After I`ve followed David`s steps my computer`s sound started working again. But it didn`t last. The sound stopped working just one day after.
I did the procedure again, and it worked. But just for a few hours.
The second time I reinstalled the IDT codec I noticed at the device manager that there is no conflict at the IDT High Definition Audio CODEC.
Instead, the conflict appear in another item of the sound, video and game controllers topic: high definition audio device.
Is there another codec I should reinstall?
Could anyone help me?
Regards,
Luiz

As nobody asked me yet, I`m going to provide some additional information, hoping this can help getting me some help!
The properties device shows the following log:
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Driver provider: Microsoft
Driver date: 22/08/2013
Druver versuib: 6.3.9600.16384
Digital Signer: Microsoft Windows
The Driver File Details shows the following driver files:
C:\WINDOWS\system32\drivers\drmk.sys
C:\WINDOWS\system32\drivers\HdAudio.sys
C:\WINDOWS\system32\drivers\ksthunk.sys
C:\WINDOWS\system32\drivers\portcls.sys
C:\WINDOWS\system32\SysFxUl.dll
C:\WINDOWS\system32\WMALFXGFXDSP.dll
Beyond this files above listed, the driver details sogs these informations:
Provider: Microsoft Corporation
File Version: 6.3.9600.16384 (winblue_rtm.130821-1623)
Copyright: (c) Microsoft Corporation
Digital Signer: Microsoft Windows
More information:
If I ask to Ubdate Driver, with automatic serch engine, I get a message saying the best driver software for me is already installed and that mine driver software for the "High Definition Audio Device" is up to date.
Can anyone help me now?
Thanks,
Luiz

Im tryting to install new itunes but says windows installer, you are tring to use is a network resource that is unavailable. find folder itunes.msi i dont have a folder like that and anything i use that is related does not work. help me?

"you are tring to use is a network resource that is unavailable. find folder itunes.msi" i dont have a folder like that and anything i use that is related does not work. ive tryed to uninstall but still does the same thing when.

Should the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

AUDIODG.EXE hogging 80-100% of CPU and sound not working in Vista . . .

I posted this on a Microsoft Answers Forum but none of the techs or people reading have been able to help so far. I'm dying to get to the bottom of this:
Here is my computer:
MSI K8N Neo4 Platinum
AMD Athlon 64 3000+
2GB RAM
XFX GEFORCE 6600 GT 128MB DDR3 DUAL DVI & TV OUT (PCI-E)
200GB WD SATA HDD
500GB WD HDD in external enclosure via USB2
NEC ND-3520A 16X DVD±RW Dual Layer DVD Burner
LG CD Burner
I've been using Vista Home Premium successfully for some time. Recently, not too long after I did a clean wipe of my OS, my audio would stop working. The way it would happen is that everything would work fine until I started iTunes or another audio application and when I would hit play, things would lock up.
Upon inspection of my system resources, I'm noticing that the audio platform for Vista, via the audiodg.exe, is using close to 100% of my CPU resources, even when the computer is making no sound at all.
I've had a Sound Blaster Live! card in my computer for some time but I was not using it; I use the Realtek AC'97 audio drivers that are on my motherboard instead. I thought that the conflict may be the computer wanting to recognize my Sound Blaster, so I took it out of my computer but the problem seems to be worse.
Are there any BIOS setting that need to be adjusted for my sound to start working again?
I'm very reliant on the audio processing power of my computer (I'm in the radio industry, part-time) and this is a huge drag on my productivity.
Any tips would be much appreciated.
REPLY #1:
Thank you for using Microsoft Answers forum. I suggest going to the manufacture of your sound card and download the latest drivers and install them.
MY RESPONSE:
Good suggestion. The problem is this:
I am running on-board audio. I have an MSI K8N Neo4 Platinum motherboard which runs "Realtek ALC Series AC97 Audio Driver" and there is no version for Vista. They have a version for Windows 2K/XP and one for Windows XP 64bit.
Should I use on of those and if not, then what?
UPDATE (from me):
I took a chance and found a Realtek AC'97 driver for Vista.
http://drivers.softpedia.com/progDownload/Realtek-AC-97-Audio-Codec-Driver-Vista-6183-Beta-Download-18114.html
I went to install it and the install hung. So, I closed one of the install windows and then the InstallShield app continued like it was working. So, I hit "Restart my computer". Well, the reboot hung too. So, I reset the PC manually.
When the computer came back up, the sound worked. Hard to tell if this will fix it for good but it's promising. Chaotic. Unpredictable. Annoying.
REPLY #2:
Before you tried updating drivers, did you try rebooting 1st?
I'm just trying to determine if rebooting your system is what resolved the issue - thank you
UPDATE II (from me):
My computer is behaving the same way it was before. AUDIODG.EXE taking up 80-100% of my CPU and the sound not working.
Any other ideas?

Small update: Despite my intelligence, good looks and vast experience I use Google sometimes. To my surprise this file turns out to be a Windows one. Here is someone who is much happier, and since it is some way in my line of thinking I'll quote it, but you might take my previous advice as well:
http://forums.techarena.in/windows-vista-performance/1012315.htm
"- Open up msconfig.exe > Manage startup programs.
- Disable ALL Realtek entries
- Close msconfig.exe
- Right-click on the speaker icon > Audio devices > Speakers (properties)
- Go to the enhancements tab
- Check the box to disable all audio enhancements
- Close the menu
- Right-click on the speaker icon > Recording devices
- Disable all your microphones (yeah..., the actual problem seems to come
from voice inputs rendering..)
- Close the menu
- Restart your computer"

I am on Mac OS 10.6.7 and Java Plug-in 2 for NAPI will not work in FF4.0?

When trying to attend a webinar which uses the Java 2 NAPI plug-in I get an error message in FF 4.0 saying I need to install thiis plug-in, which is already installed. I have gone to the add-on manager and disabled this plug-in restarted and enabled it again, but it still will not work.
Any ideas?

I forgot one detail. This happened while I was having trouble seeing the mouse cursor (I use Apple's Magic Mouse). It had disappeared briefly. I had to drag the cursor out of the Firefox Window for it to reappear. I accidentally entered full screen view while the cursor was not visible.

Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blank

HELP!
Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blank

It's been a while but it should work on a Mac because Macs can read Windows formatted devices. Otherwise, you can perform a restore operation to return it to the Mac format. If you go to support.apple.com/manuals/ you can find a copy of the user manual for the model you have in which this is all explained.

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Since windows has been update acrobat x pro not working, what to do?

since windows has been update acrobat x pro not working, what to do?

acrobat x pro cs6, windows 7, there are no text massage
i did tried to uninstalling and reinstalling acrobat, but the problem comes
back
the issue is:
i can close to pdf file at working on indesign, but when i want to open the
file the acrobat wont respond, it just not open at all.
2014-02-19 16:23 GMT+02:00 Rave <[email protected]>:
Re: since windows has been update acrobat x pro not working, what to
do? created by Rave <http://forums.adobe.com/people/Rave> in *Acrobat
Installation & Update Issues* - View the full discussion<http://forums.adobe.com/message/6135679#6135679

HT5634 i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?

i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?

Welcome to Apple Support Communities
You have to format your Windows volume and install Windows 7. First, insert the Windows 7 DVD and hold the C key while your computer is starting. Then, follow the steps and, at partitioning step, choose your Windows volume (it's the last volume listed in your display), choose Advanced options, and format it. Then, install Windows.
Finally, after installing it, install the Boot Camp support software > http://support.apple.com/kb/DL1630
Windows 8 is only compatible with some new computers. See > http://support.apple.com/kb/HT5634

Windows Server 2012 - Printing using UNC path not working

Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario.

Sound not working after checking for driver updates and resetting bios

I am running a (HP Pavilion dv7-6c60us Entertainment Notebook PC)
I had muted the sound and did a system upgrad prompted by my HP assistant after logging on. Now when I try to get sound nothing happens. So I went out to the support site and checked for driver updates and none were found. So I then went into my system bios and reset it as stated in a support for sound not working and still no sound. HOW DO I GET MY SOUND TO WORK AGAIN?

From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Z77 mpower and windows 8.1 enterprise: 5.1 sound not working

Similar Messages

Maybe you are looking for