Z77A-G43 PROBLEM WITH RAM

hello
I need help, I bought a MSI Z77A-G43 motherboard and a CPU INTEL I7-3770K, I installed everything but when I insert the memory (provided ALL WORKING AND TESTED) the pc does not start, and if I put a model KINGSTON kvr1333d3s8n9 / 2g pC starts, this in any slot of the motherboard if I put 2 equal does not start!.
If we insert the KVR1333D3N9/2G which also is certified in the manual does not start the PC.
I updated the BIOS to the latest version 2.8 but to no avail, the problem persists.
I realized, however, the BIOS reports as the DIMM1 and DIMM2 DIMM3 as DIMM4 and of course the DIMM3 as DIMM1 and DIMM4 as DIMM2.
Can anyone help me?
Thank you very much
Board: MSI Z77A-G43
Bios: Version 2.8
MEM: 2 kingston ddr3 1333 2gb KVR1333D3N9/2G
2 kingston ddr3 1333 2gb KVR1333D3S8N9/2G
Intel Core i7-3770K 3.5GHz (3.7GHz Turbo Boost) LGA 1155 95W

Quote
I realized, however, the BIOS reports as the DIMM1 and DIMM2 DIMM3 as DIMM4 and of course the DIMM3 as DIMM1 and DIMM4 as DIMM2.
This is because DIMMS 2 & 4 are the primary DIMMS. (The ones reported as 1 & 2)
So a matched set of Quote
KINGSTON kvr1333d3s8n9 / 2g
Quote
If we insert the KVR1333D3N9/2G which also is certified in the manual does not start the PC.
This sounds like defective ram.

Similar Messages

MSI P6N SLI PLATINIUM problem with ram 800MHz

Hello.
I have problem with ram frequency.
I have MSI P6N SLI PLATINIUM and OCZ 2x2GB 800MHz CL5 but in bios I see that my ram runs in 667 MHz. Because I have 800MHz ram, so it shouldn't be default 800MHz and not 667MHz? What I have to do to show bios that I have 800MHz ram?

Quote from: DaLoona
Oke, but they told me when i bought my new system that XP auto adjusts the speed of the memory.
XP 64 bit can works normally with 4 or more GB they said, just like vista.
Just typing what "the professional's" at the store said.

Z77A-G43 Gaming with CORSAIR Vengeance 8GB (2x4GB) Model: CMZ8GX3M2A1600C9

Hi,
I just orderd this mb and now im looking for 1600mhz ram kit (2x4GB).
is the CORSAIR Vengeance 8GB (2x4GB) Model: CMZ8GX3M2A1600C9 kit will be fine with this mb or someone can offer me a good ram kit to buy.
CPU: I5 3550 Ivy bridge
Graphic card: AMD Radeon 7970GHZ
thanx 4 reply.

Quote from: gilad ahyoun on 05-August-13, 05:24:34
is the CORSAIR Vengeance 8GB (2x4GB) Model: CMZ8GX3M2A1600C9 kit will be fine with this mb or someone can offer me a good ram kit to buy.
CPU: I5 3550 Ivy bridge
The CPU is OK with 2 x 4GB DDR3-1600.
http://ark.intel.com/products/65516
Talking about the motherboard:
http://www.msi.com/product/mb/Z77A-G43.html#/?div=TestReport
Click on the "Memory Modules" button and download the PDF file.
http://www.msi.com/file/test_report/TR10_2540.pdf
You'll find CMZ8GX3M2A1600C9 as supported.

Z77A-G43 issue with SATA drive

This is wierd
I have 4 Hitachi drives all of 1TB, perfectly working on old PC.
Today have decided to transfer them into new PC:
MB: Z77A-G43
BIOS: 1.20
CPU: Intel g2020
Primary drive is Intel SSD 120G series 330
I have attached 3 HITACHI drives successfully, they are all working fine.
but particular one forces MB to reboot before BIOS screen, last code seen on screen is A2?
Then I have decided to put dedicated controller 1st I took SilImage 3512 SATA/RAID Controller
- no changes computer reboots before post screen
After I took VIA VT6421 SATA/RAID Controller
- no changes computer reboots before post screen
searched web, found nothing useful.
any ideas what might causing this?
EDIT: tested controller SiI3512 on old PC and trouble HDD, everything works just fine :/
read AMIBIOS codes:
0xA0 IDE initialization is started
0xA1 IDE Reset
0xA2 IDE Detect
0xA3 IDE Enable
0xA4 SCSI initialization is started
0xA5 SCSI Reset
0xA6 SCSI Detect
0xA7 SCSI Enable
0xA8 Setup Verifying Password
A2 is ide ? what ide ? I give up.
it seams to me that this board is broken in several ways
- non working DVI
- faulting with valid SATA drive
what else awaits me on this road

Quote from: flobelix on 07-May-13, 04:27:27
using IDE previously and now AHCI might trouble Windows but system would none the less post. At least you should get past IDE detection but hanging at A2 means it doesn't.
I'm wondering about your statement you had been using SilImage 3512 SATA/RAID Controller and VIA VT6421 SATA/RAID Controller. Are these PCI add-on cards? Did you try all SATA ports controlled by the Z77 chipset. Are the drives used are all identical? Is the issue only happening with one particular drive or anytime you attach a fourth hdd no matter which one it is?
About the performance difference from AHCI to IDE the differences are minimal. Should be almost irrelevant for the hdds.
My discoveries:
Using sata mode IDE with windows installed in AHCI mode == windows hangs during loading (BSOD), probably missing drivers or similar.
Also I am unsure what A2 code means but I have noticed it is displayed while bios post screen shows up with the list of installed drives during normal boot.
And is also last code I see when I attach problematic drive resulting in reboot loop.
To be honest I haven't tried all SATA ports on board for sure I haven't tried SATA 1 (1st white) as there is my SSD drive.
But I have tried almost all other ports. I can try them all, but I don't think this will solve the problem.
I don't think problem is in what slot I put my drive, since same behavior is with SATA/RAID controllers.
And whit this SATA/RAID controllers this drive is working perfectly normal on other PC.
No not all drives are identical but I have exactly same drive as this one, and all drives are hitachi:
* HDT721010KLA330 working fine
* HDS721010SLA360 working fine
* HDS721010CLA332 (1) working fine
* HDS721010CLA332 (2) problematic drive == reboot loop (when its single drive or with others).
True I haven't tried to detach Intel SSD and leave problematic drive as only drive in system, I may try this tomorrow)
funny part is that HDS721010CLA332 (2) is working fine when I hot plug it.
Checked firmware version on both drives, and both drives have identical firmwares.
Only difference I know off is that working drive has 1 partition, and problematic drive has 2 partitions.
EDIT: forgot to say it passed SMART test, everything was green (hitachi sw), while hdd sentinel reported 1 bad sector but saying estimated drive working days > 900 days and degree was 98% I am guessing because of that 1 bad sector and too many working days (years) behind him.

Problems with RAM upgrade iMac G5 1.8GHz

Stuck - Need Help!
I've previously upgraded up iMac to 2 500Mb RAMs and felt recently that it needed that little bit extra, so I ordered two 1Gb chips from crucial.
Followed instructions to T, but with the two new chips in, the machine won't load.
Interestingly, it boots up with the following RAM combinations
old 500MB + new 1GB (in any combination) - recognised as 1.5GB
one new 1GB RAM (again either one) - recognised as 1GB
I spoke to crucial who said that as the RAMs work individually, there isn't a problem with them, it could be a Firmware issue. I've upgraded all my software, and don't know what to do next?
Anyone overcome a similar problem in the past?
Thanks

I'm experiencing something very similar to shaow. I'll share my experience in gory details - sorry for the long post but I've spent more hours trying to stabilize. I should have worked the hours at walmart and bought a new iMac with the money I could have earned
Anyway, here goes:
Two iMac G5 1.8Ghz 17" (both Fall 2005 model), will call one A and the other B.
Prior to attempting ram upgrade: A, config working fine: both a config using 1GB slot 1, 256MB slot 2 and a single 1 PC3200 1GB stick. OS X 10.4-10.5.7. No problems. I did have the motherboard replaced under warranty after having sleep problems - capacitors were expanded. No problems since that motherboard swap.
Prior to attempting ram upgrade: B, config working fine: 2 x 256MB sticks. OS X 10.3.9
Ordered 3 PC3200 400Mhz 1GB sticks from Data Memory Systems.
Upgraded A: Added 1GB stick = 2GB total
Upgraded B: Removed both 256MB sticks from B and added two 1GB sticks = 2GB total
Booted B, experienced gray screen of death with the multi-language crash message - somethign like: 'Please hold down the power button and restart'. Power cycled B, booted off a retail box DVD of OS X 10.5.6. Began upgrade to 10.5.6. Gray screen of death part way thru upgrade. Power cycled, gray screen of death again during early boot phase.
Decided to run tests on B. I could not locate the Apple Hardware Test (neither on system dvd 1 nor on a separate DVD). I resorted to using TechnoTools Deluxe which was included with AppleCare box. No hardware problems found including on the 2GB memory.
Removed both new 1GB sticks, pulled older working 1GB stick from A and installed into B. Completed upgrade with just 1GB memory on B to 10.5.6 and subsequently pulled down all updates for OS X 10.5.8. Powered down, added second 1GB stick to B, booted into 10.5.8 successfully. Repaired disk permissions, restarted. Began using applications, then after only about 5 minutes experienced gray screen of death. Powered down, removed new 1GB stick, replaced with one of the two remaining new 1GB sticks. Read about reseting PRAM/NVRAM. Followed steps to reset PRAM then decided to do the reset NVRAM within openfirmware. Started back up and logged into 10.5.8. Ran several applications - did not experience gray screen of death after about 20 minutes use. Have not had time for further tests on B yet.
Back to my saga with A (my original iMac G5 that was working fine with 1GB stick on 10.5.7):
Called Data Memory Systems and they sent me a replacement for the 'bad' 1GB stick.
While I was waiting for the new 1GB stick from DMS, I was struggling to get machine fully updated. Software Updater was failing with the weird network error (network was fine) and after following steps to troubleshoot, I backed up the user accounts and decided to reinstall OS X fresh from the 10.5.6 retail box (family license). Finally, I had OS X 10.5.8 all fully updated on the 1GB iMac G5 (A).
New memory arrived, installed 2nd 1GB stick. Booted up, immediately I got the gray screen of death. Restarted, booted up got about 5-15 minutes use then gray screen of death. Puzzled, I called DMS who said unlikely I got 2 bad sticks. They suggested I try memtest. So I did...
So on A, I first ran memtest from single user mode on the 2GB config. It crashed immediately with some 'Unexpected' error. Did not look like a memory error. I powered down, removed 2nd 1GB stick, and ran memtest from single user on the 1GB stick. Ran all tests 3x over a couple hours - no problems found. Retested after swapping the 1GB stick for the other. Both tested fine. Installed both sticks again and ran memtest all tests, one pass (didn't want another 6 hours lost) on the 2GB config, and all tests passed. Booted up and got gray screen of death - I don't recall if it was on bootup or after running but I ran fsck with no disk problems found, then restarted, logged in, ran disk utility to repair all permissions. Some repairs were made. Restarted A, reset PRAM and NVRAM again, booted successfully.
I haven't had much time to run extensively apps on A yet. It's sleeping as I type this on another mac. My next test will be to reset SMU.
I'm starting to wonder if the original iMac G5 has firmware problems that would prevent it from being unstable with two 1GB sticks??? My experience on two identical models of iMac G5 plus reading this post with VERY similar behaviors and after all the normal tests. I've concluded the memory is A-OK and something more sinister is lurking...
Any thoughts are appreciated.

MSI Z77A-G43 GAMING with CORSAIR Vengeance Pro CMY8GX3M2A1866C9

HI,
I need to know please if i can use this ram kit ?
if yes, can i get the max ram freq (1866MHz) by enableing xmp in bios ?
cpu: I5 3550 Ivy bridge
thanx

XMP will not be found under CPU support. Its not a CPU function. Its a pre-defined memory SPD profile that can be used by board manufacturers as a BIOS feature. A sort of a one-stop shop to apply a certain overclocked memory condition.
The RAM manufacturer will have predefined JEDEC SPD profiles programmed onto a EEPROM chip on the mem module. If its overclocked memory, then additional XMP profile/s may be added. This XMP profile can be applied by enabling the XMP feature in the BIOS. This enabling of the XMP then tries to apply the pre-programmed profile to the CPU memory controller. The mem controller may or may not work at this desired XMP setting. It saves you the effort of setting the overclocked mem profile manually.
With Ivy bridge CPUs the mem controller can apply 1600 as default. Anything above that is not guaranteed.
Thus if you have memory with a XMP 1600 profile, then its most probably 1333 memory with an overclocked XMP profile of 1600.
XMP also will only become visible in the BIOS if the memory actually has a XMP profile.
If your memory has a 1866 XMP profile, then that will be applied to the IMC, or at least an attempt will be made. The IMC may or may not work at that OC'ed mem setting. Further tweaking maybe needed, i.e. increased voltage to stabilise. Experience though shows that most of the memory controllers on Ivy will not have a problem with 1866.

Strange problem with RAM!

Is there any problem with the MSI KT3 Ultra 2 supporting the 3 banks with RAM?
I used 256 Mb of crucial RAM for 1 moth but just Purchased another stick of 256 crucial and installed it but the board refuses to work with the two sitks at the same time, it works great with each of them but not with them toghether, what´s wrong?? ?( ?(

Now I don´t know what´s wrong, I have tried every possible combination, but the problem persister and now I´m very disappointed with this board, this is a very strange problem, I tested the memory with memtest 86 and it gives me aleatory errors for exemple gives 6 errors in the first pass then in the second pass is everything ok then gives me one or two in third, other times is everything ok all the away, and I just can test each stick alone if I insert the two stikers the program can´t run.
before all this problems I was able to reach 145 FSB with agressive timings in the memory, now I can´t even reach 133 FSB because it crashs, I can´t blame the PSU because it is an enermax 431, if it wasn´t so i believe the problem was from that but I think this PSU are enough for *1 athlon XP 1900 *1 DVD *1 Plextor CD-RW *1 Maxtor 40 Gb *1 western digital 80 Gb *4 Fans + the heatsink fan.
everything indicates that the problem is from the board, bacause when I use just one stick, it doesn´t matter which one, it works but when I use both toghether it refuses to work properly.
I have now two months with this board and I was happy with it but now I´m ?( X( :( ;(

MSI Z97 Gaming 3 problems with ram

Sorry for my bad english. I have only one bank of ram 4GB Kingston Fury 1866MHz and some problems with it. When it's installed on DIMM1, in UEFI BIOS, in Windows 8.1 Pro x64, aida64, cpuz, ram saw as DIMM3! If it's installed DIMM2 saw as DIMM4, or installed DIMM3 saw as DIMM1! What's that? What kind of problem on my motherboard?
Fresh BIOS version 2.6 installed.

Quote from: rocketpowerik on 06-May-15, 17:20:02
One detail i loose in my spec, PSU: Seasonic SS-750HT(750W).
To your signature.
Quote from: rocketpowerik
And last one if i changed OC ram settings to 2133MHz or 2200, 1.65v., and CL10 Performance preset.
No much difference with stock preset.
You can only compare same software results, each software give slight different results.
Quote from: rocketpowerik
Butt i watched review when my memory with same settings demonstrated 20000MB/s read/write results.
Single channel?
Post a link.

Z77A-G43 Problem | Big Ultra need help :(

Hello sorry for my bad English i'm French ^^'. Ok, I have a motherboard Msi z77a-g43 and I put a password for my bios.. I lost this password so but I search in the internet how to unlock password... I removed the battery in my motherboard and my motherboard is locked :( He show a message (Error) : Warning!!!Please insert USB key press any key to check. Please help me but I sad .
Thomas,
thanks.
My config :
MSI Z77A-G43
Intel Core i5 3470
2x4 GO Ram 1600 Mhz G.Skills Ripjaws
Windows 7 Ultimate 64 Bits
nVidia GeFore GTX 650 by Asus
Corsair CX500 Bronze 500 Watts

Contact MSI. The forum does not assist in password hacking or bypassing. Have your proof of ownership handy as well.
>> Contact MSI <<

HP ProBook 4525s- problem with RAM

Hello. I am from Belarus and bad know English.
I have some promlems with RAM
WHY?

Integrated graphics:
ATI Mobility Radeon™ HD 4250, up to 512 MB shared system memory (UMA) graphics controller
with shared video memory.
Check BIOS for video memory using system memory.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

MSI 870A-G54 problem with RAM frequency

Hello,
Im currently using MSI 870A-G54 motherboard with Phenom x2 560. I started upgrading my hardware (with baby steps) and started with RAMs.
Bought 2x4GB 1600 MHz Goodrams and after plugging it in I got some random freezes and shutdowns. I recently...

Hello. I just installed it but the main screen of the program it's absolutly black, here you can see an screenshot
What should I do?
Notebook : MSI GS60 2QE Ghost P...

MOVED: MSI CX623 - Problem with RAM and setting the primary board

This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=167930.0

You should try a different mem slot. Say for example 0 and 2. There have been issues with DDR slots and all different types of mobos. Like I have a Shuttle Ak31v3 mobo with 2x256DDR2100 Kingston and the chips will only work on slots 2-4 and 1-3. It will not boot if I tried any other combination. It's a pain in the ass but thats just how it is. I had this same problem with a Asus A7V266.
I don't however have that problem on my Kt3 ultra 2 R mobo.
Madd

Z77A-GD65 Problems with Ethernet (Intel 82579V) Code 10 and 55 error

it is just a day with disaster. I bought Z77A-GD65 yesterday, and now it almost driver me crazy , i have two most famous problem of the board ,the CODE10 and ERROR 55!!!
after i bought this board to home ,i spend few hour to figure out the reason why the system can not be booted.
the DIMM SLOT 3&4 of my board is malfunction,no matter what combination i use (1&3,2&3, 3&4...etc),but it works for 1 and 2(i have 4 ram sticks,all of them is fine)
i do upgrade to BIOS 10.5(thx god ,i have two computer ,otherwise i cant even do it because of following issue)
after i solve the problem by only plug in 2 ram (DIMM1&2), succeed to boot up, a new problem occurred to me ,the CODE10!
latest driver , clean system install ,cmos cleaned, does not help.
i have read this thread for code10
https://forum-en.msi.com/index.php?topic=158591.msg1167303#msg1167303
and for error55
https://forum-en.msi.com/index.php?topic=158224.0
it seems the best way to solve it is RMA.
I notice that there is an Authorized Motherboard Repair Center (East Coast):
361 Alden Road
Markham, Ontario, L3R 3L
i live in Toronto, can i just go there and give the board to them to fix it or i can only mail it?
If i need to mail it ,what should i do?

Code 10 means the device cannot start. You have the right driver for the Intel 82579V is shorted by either a motherboard screw or a raiser under it. The ethernet adapter has lights which light up id driver is installed (even though code 10 is in effect).
Solution: Remove 1 or 2 motherboard screws and turn the pc on. Repeat until you find out which screw caused the issue. For me it was the screw closest to the ethernet controller.
The wa i fixed it was I was used a plastic washer and I was still able to have the motherboard screw in and at the same time not get code 10 anymore and my Intel 82579V worked fine since.

Problem with RAM preview in Windows 7, AE 5.5

Hi there, I'm kind of a newbe with After Effect 5.5, have to make an animation for school and although I've already figured out how to make some magic with the program, I'm stuck on the RAM preview (yes, the one you get by hitting 0 if anyone asks). It gets stuck after 15-22 fps and that's it. I've searched forums, and comments and articles and whatsoever and the authores where having this issue when having Macs. Well, I don't, that's what I have:
64 bit Windows 7
Intel Core i7-2630QM CPU @ 2,00GHz
6,00 RAM
graphic card NVIDIA GeForce GT 540M
(any more details needed?)
I've also tried many combinations with checking/unchecking OpenGL, changing Video Preview (Computer Monitor Only or IEEE 1394 Pal <=don't even know what that is, but maybe you'll want to know), and of course Multiprocessing (image below) turning it off ond on.
Compositions in my animation are for now just jpg's, png's and some psd layers, with some scaling and small dropshadows, nothing too fancy for now so I'm even more surprised I get the "Insufficient RAM" allert. (AE is the only running program except for GoogleChrome to search for possible solutions) Of course I need to add the sound but it's pointless until I figure out the RAM preview problem.
I think that's all the details, but if you need more just ask.
Please help me guys (and try to answer in simple English), it's really getting on my nerves and my deadline is coming...

I'm not sure that I completely understand what you are saying. Depending on the amount of available ram and the size and frame rate of the composition (not in your post) you may only get 15 to 22 seconds of playback. If it's only playing back at 15 to 22 FPS then you're choking your system. The first thing to do is to try setting the resolution of our comp to half and the zoom factor to 50%.
Now that I take a close look at your screen shot, that's not going to help much. Surprise, surprise! You don't have nearly enough ram to have Render Multiple Frames Simultaneously checked.You need 4GB per processor minimum. With 8 CPU's you'll need 32 GB of ram to take advantage of all your cores for AE and you'll still need 1 of them for background apps. Take a close look at the settings:
How much ram is allocated for background apps? 1GB, How many CPU's will be used for the background apps like writing to disk and reading from disk, which are necessary for ram preview? 0, zero, nada. That's not exactly accurate or your system wouldn't run at all, but it shows the problem clearly. You've manually choked your fairly powerful computer by tying upp it's resources in a manner that causes it to choke on memory and read write cycles. Even with 6GB of ram you've starved the system to death.
You've also allocated all of your ram to AE. Don't do that. Leave at least 1 GB for other apps, 2 would be better.
Redo the settings and AE should work just fine. BTW, this info is clearly stated in the ram and memory allocation help pages for AE.

Problem with Ram upgrade

Hi, I have an Imac (27", mid-2011) and I just bought a 4Gb Ram memory to install in one of the free slots, I installed and turn on my computer, the computer recognized the new memory but when I'm going to open a program (and even when I leave the computer alone and I don't do anything) the computer restarts with the next message: "The computer restarts because of a problem". I think that is because the new Ram memory but I don't know what is exactly the problem. This is the report I have:
Anonymous UUID: B5651C4E-E7E8-0618-89E8-282E92E9EE95
Mon Jul 21 19:38:32 2014
Panic(CPU 2): Unresponsive processor (this CPU did not acknowledge interrupts) TLB state:0x0
RAX: 0x0000000000000078, RBX: 0xffffff80381e8ae8, RCX: 0x0000000000000001, RDX: 0x0000000000000056
RSP: 0xffffff81063b3c68, RBP: 0xffffff81063b3cc0, RSI: 0x0000000000000002, RDI: 0xffffff80381e8aea
R8: 0x0000000000000040, R9: 0xffffff81063b3e70, R10: 0x00007fff882369f2, R11: 0x0000000000000246
R12: 0xffffff80381e8aea, R13: 0xffffff80381e8ae8, R14: 0x000000567989e447, R15: 0x0000000000000001
RFL: 0x0000000000000006, RIP: 0xffffff8015cd097c, CS: 0x0000000000000008, SS: 0x0000000000000010
Backtrace (CPU 2), Frame : Return Address
0xffffff80febcef50 : 0xffffff8015ce1ed1
0xffffff80febcef80 : 0xffffff8015cdb3ef
0xffffff80febcefd0 : 0xffffff8015cf34e9
0xffffff81063b3cc0 : 0xffffff8015f5fda9
0xffffff81063b3cf0 : 0xffffff8015f83984
0xffffff81063b3d50 : 0xffffff8015dfd79e
0xffffff81063b3dc0 : 0xffffff8015df4b0b
0xffffff81063b3e00 : 0xffffff8015df3d2f
0xffffff81063b3e50 : 0xffffff8015fbf5bc
0xffffff81063b3ec0 : 0xffffff8015fbcbde
0xffffff81063b3f10 : 0xffffff8015fbf35a
0xffffff81063b3f50 : 0xffffff801603e363
0xffffff81063b3fb0 : 0xffffff8015cf3b26
BSD process name corresponding to current thread: mdworker
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000015a00000
Kernel text base: 0xffffff8015c00000
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 371660982402
last loaded kext at 52012998408: com.apple.driver.AppleBluetoothHIDKeyboard 170.15 (addr 0xffffff7f975f7000, size 24576)
last unloaded kext at 165977242407: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f9693c000, size 65536)
loaded kexts:
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.apple.filesystems.msdosfs 1.9
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AGPM 100.14.15
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.kext.AMDFramebuffer 1.2.0
com.apple.AMDRadeonX3000 1.2.0
com.apple.kext.AMD5000Controller 1.2.0
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AirPort.Atheros40 700.74.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.IOBluetoothHIDDriver 4.2.3f10
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOAcceleratorFamily 98.14
com.apple.kext.AMDSupport 1.2.0
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
panic(cpu 0 caller 0xffffff8015cc01bb): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x4, NMIPI acks: orig: 0x0, now: 0x1"@/SourceCache/xnu/xnu-2422.90.20/osfmk/x86_64/pmap.c:2612
Backtrace (CPU 0), Frame : Return Address
0xffffff8107dcb920 : 0xffffff8015c22fa9
0xffffff8107dcb9a0 : 0xffffff8015cc01bb
0xffffff8107dcba30 : 0xffffff8015cc5193
0xffffff8107dcbb10 : 0xffffff8015cc5c87
0xffffff8107dcbb70 : 0xffffff8015c7dfba
0xffffff8107dcbc80 : 0xffffff8015c8228f
0xffffff8107dcbcb0 : 0xffffff8015c8567d
0xffffff8107dcbda0 : 0xffffff8015c1f217
0xffffff8107dcbe20 : 0xffffff8015c5fc46
0xffffff8107dcbe50 : 0xffffff8015c26bf1
0xffffff8107dcbe80 : 0xffffff8015c139f5
0xffffff8107dcbef0 : 0xffffff8015c1e043
0xffffff8107dcbf70 : 0xffffff8015cc976d
0xffffff8107dcbfb0 : 0xffffff8015cf3b46
BSD process name corresponding to current thread: launchd
Model: iMac11,3, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 8 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353436392D3033352E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: Hub
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:
Thank you all.

1. You have two different brands, Samsung (M471B5673FH0-CH9) and Kingston (99U5469-035.A00LF).
2. Typically, DIMMs are symmetrically added, 2,2,4,4 or 2,2,2,2 or 4,4,4,4 and each Bank should have matched pairs in size and speed.
If you remove the 4GB memory do your crashes stop?
MACs are very specific about memory.
You can try this, but it may not work.
BANK 0/DIMM0 - 2GB
BANK 0/DIMM1 - 2GB
BANK 1/DIMM0 - 4GB
This is what you have now.
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353436392D3033352E4130304C4620

Z77A-G43 PROBLEM WITH RAM

Similar Messages

Maybe you are looking for