Z77A-G45 no audio other than HDMI

Greetings,
This is my 4th build, so I am not a total beginner, but it has been several years since I have built a new system. Everything went well after the build except that I don't get any audio other than from HDMI that goes to my monitor. I don't want to use my monitor because the speaker sucks. However, I am unable to get audio from the either the front or rear audio jacks. I tried plugging the HDMI audio connector to the JAUD1 connector on the board, and I also tried switching to the AC97 connector. I downloaded the most recent version of drivers off the MSI website, and I currently have version 6.0.1.7004 of Realtek HD Audio Manager installed. When I plug speakers or headphones into either jack, Audio Manager recognizes it, and prompts me to select what type of device is plugged in. I also verified from Device Manager that the device is enabled and lit up as available. However, I still get no audio. I am up for any suggestions, because I've run out of ideas.

Hi there;
Please inster full system specs.
I ges you use seperate GPU wich has HDMI and you get audio out of that?
That GPU has soundcard in it and so that is made By OS to be master audio device, as you use HDMI device that has speakers in it.
Go to Controlpanel/ Audio and there rigth click on speaker and then on "set this to master device" (or something like that i have fin win sorry)
Hope this helps. Cheers Mummy
Edit: Useing DVI-cable could allso fix this. If that OS is smartenaf to notice your audio device has changed. You dont lose any picture quolity, it maybe even be better in longrun, as it has lock to secure it in.

Similar Messages

Options for receiving audio other than onboard mic...

I spent about 8 hrs in my home studio making a really awesome voice mail message for my Verizon account. After I completed my new snazzy message I attempted to record it to my voice mail account. When the phone promoted me to say my message I simply played my recording through the speakers and held up the phone. Ugh! Sounded terrible. I tried different volumes of playback, diff distances from speakers... nothing could make it sound clear like it does in the actual room. Then I tried my Bluetooth headset with the understanding that the thing is marketed as having a good mic. No better. So I called Verizon and they claim to have no way to digitally transfer my mixdown to the account (I was thinking if I could make my message into a MP3 r whatever, maybe I could upload it somehow). No go. So I'm forced to record it real time to Verizons recorder. Soooo...does this Curve here have any sort of alternative to the onboard mic other than a Bluetooth? A line in would be perfect as I could play my mix into the phone bypassing the mic altogether. But I think I'm outta luck. Any ideas for me?

I think you're out of luck as you said.
This is a Verizon function, not of the BlackBerry. The voicemail system lies in their servers somewhere.
I don't know of any line-in function. It's not available.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Connecting macbook to TV (other than HDMI)

I own the mini display port adapters to both DVI-D and VGA.
Connecting the DVI-D from the macbook to the HDMI input of my TV using a simple cable works fine. However, my TV has only one HDMI input and I would like to use it for something else. Instead I'd like to use either of these available TV inputs: YPbPr, S-Video, Composite.
Since all of these use analog signal, it seems I can't connect them to the macbook DVI-D output. But I would expect a simple, cheap way to connect the macbook VGA output to one of these three. Suggestions?
TIA

http://www.monoprice.com/products/product.asp?cid=104&cp_id=10401&cs_id=1040113&pid=2509&seq=1&format=2
you can try this.. I have no experience in this but I assume this is what you are looking for.

Can I use something other than HDMI for the apple TV?

My TV and AVR are in different locations. For this I ran the connection with cat5 and hooked it all up with component video. The AVR won't down convert the hdmi to component out so therefore I can not plug hdmi into it. Does the apple tv connect video only through hdmi? If so could I hook up a unit to the tv itself and one to the receiver independently for sound?
I have a pioneer sc-25 and a samsung plasma (b650 maybe?)

That won't work. The only way you can get sound to the AVR without using the HDMI or optical cable is to use it as a remote speaker from iTunes. Remote speaker doesn't push video. You would have a synchronization problem between your tv and your remote speakers driven by iTunes.
Regards

Can I make a connection from Apple TV to HD television other than HDMI?

Question:
With only 2 HDMI ports on my HD TV, and the apparent need for 3 -1 for a Blu-Ray DVD player, 1 for connection to Apple TV, and one to connect to HD cable modem, I feel stuck.
What do I have to do, how much will i be giving up?
Is getting a cable box with two HDMI connectors the solution?
Or other equipment?
Tthanks,

Paulrichard wrote:
With only 2 HDMI ports on my HD TV, and the apparent need for 3 -1 for a Blu-Ray DVD player, 1 for connection to Apple TV, and one to connect to HD cable modem, I feel stuck.
Cable modems do not have HDMI ports and do not connect to tvs. Maybe you mean a cable set-top box?

MacBook Pro sound out to airport express other than iTunes

Is there any way to get sound to link to my airport express other than iTune files?
I've gotten iTunes to connect to my airport express and then toslink it to my preamp but is there any way to get audio other than in iTunes to connect wirelessly to my airport express e.g. a movie sound track or a you tube audio? I listen to internet radio through iTunes all day and it's great, but other audio, only comes out either from the MacBook Pro speakers or vie hard wire (or optical) to my sound system. Sounds so simple, and it might be, but... how?

Sure, it's easy. Check out airfoil at http://www.rogueamoeba.com/airfoil/
I use it with 2 airport express and also my ipod touch. The "hijack" application they pair with airfoil lets me listen remotely to just about anything I can play on my Mac. Wish I could use the ipod touch as a remote as I do with iTunes.

Z77A-G45 Live Update drivers different than websites (Also Intel has their own)

(MS-7752) Z77A-G45
Win7 64
Why are there different drivers listed in Live Update 5 than what is listed on the website? This is especially confusing with Management Engine driver because there are two separate drivers dated 2013-10-16 on the website in addition to Intel and Live Update having their own different driver.
Some examples:
MSI website:
Intel Management Engine Driver 9.5.15.1730
Intel Management Engine Driver 8.1.30.1349
Realtek High Definition Audio Driver 6.0.1.7037
Intel Smart Connect Technology Driver 4.2.40.2418
Live Update 5:
Intel Management Engine Driver 9.0.0.1310
Realtek High Definition Audio Driver 6.0.1.6959
Intel Smart Connect Technology 3.0.42.1767
Should I just go 100% by the website (although Intel's are also different than MSI's site..)?
Also, I'm currently on BIOS 2.9. Should I update to 2.C0? Is that one stable for overclocking?

Quote from: Nichrome on 07-December-13, 19:42:57
I suggest you uninstall Live Update ( I did so) because it f...k my drivers one day, and had to do fresh Win7 installation and even BIOS update which I didn't need before ..
That sucks.
I've never actually installed anything with it. I was just curious to see which files it'd attempt to update. I'll definitely uninstall it now though..

Z77A-G45 start up-shut down loop with more than 1 stick RAM

New Build, personal use and doing it myself:
BOARD: MSI Z77A-G45
BIOS: *?* click-bios reports "E7752IMS V2.5", but "MS-7752 VER: 1.4" printed on board?
PSU: Thermaltake 850-watt Black Widow 69A 12v rail
CPU: Intel Core i7-3770K BX80667i73770K - Quad Core, 8MB L3 Cache, 3.50GHz, 77W, Unlocked, fan included, no extra cooler yet
MEM: Corsair Vengeance CMZ8GX3M2A1600C9B 2x4GB 1600 MHz, 9-9-9-24, PC3-12800, 1.5V
HDD: WD Blue WD10EALX 1TB, SATA 6Gbs, 7200RPM, 32MB Cache
CASE: Thermaltake VN770M1W2N Overseer RX-I Full Tower
OS: Win7 Pro 64-bit
System bought as bundle including the 2x4GB Corsair RAM. Assembly went well but took me a long time to make sure I had it all right. Then, nothing happened at power-up, no lights or anything. My first reaction was to replace the included Thermaltake power supply (700 watt 52A 12volt rail) - I disconnected all power to the unit and removed the original psu and, on a whim, I booted up with the original power supply outside the case and the lights came on with the psu laying on it's side! Got the start-up and shut-down loop (lights up and spins all fans for a few seconds, then shuts down and repeats ad infinitum), which I was not expecting. Replaced the original power supply with the Black Widow (specs listed above) and got same shut-down loop.
Started checking the memory sticks one at a time in DIMM2, each produced that shut-down loop. Also tried with two sticks of Patriot Viper 3 PVI316G160C9K 2x8GB 1600 MHz, 9-9-9-24, PC3-12800, 1.5V (which doesn't appear on MSI's compatible list...but I had it handy) Then, With the last 8GB Patriot stick in DIMM2, I finally let it go through that shut-down loop 5-6 times out of frustration, and then it suddenly powered up "normally"!
I took advantage and have smoothly installed Win7 Pro, and mobo drivers from CD, no glitches, USB working fine. Then tested each stick - all 4 RAM sticks work individually in DIMM2, but the board will not accept a 2nd stick in 4 without that same shut-down loop (tried using either matched pairs). Manual specifies using DIMM2 and 4 (which are the black ones) for dual channel. Have also tried slots 1 and 3 (blue) with same shut-down loop results, no BSOD or error codes, not even any beeps. Computer boots normally and runs Win7 just fine with one 8GB stick in DIMM2. Also boots Windows and runs fine with one 4GB Corair chip in DIMM2.
Have done CMOS clears and also re-seated the cpu and heatsink/fan, and all pins and board connections looked OK.
Have some problem getting into the BIOS screen to look at things - seems to boot up so fast with a re-start that Delete key and F11 don't quite catch before Windows starts (8-year-old Logitech USB keyboard?). Have to completely power down and start up to get into BIOS, but that doesn't always work either. System recognized the memory change to the Corsair stick, but the screen went by so quick I couldn't catch it to get into BIOS.
Questions:
1) I've searched this board and read for hours about similar shut-down loops problems, but either nothing seems to match my particular quandary or I don't know what to look for. I don't understand what's happening with this shut-down loop - since all four sticks work individually in DIMM2, could DIMM4 slot be defective and I need to RMA the board?
2) I have not yet removed the board and tried to start it outside the case - could a short be causing the 2nd slot to malfunction? Standoffs are built into the case but they didn't seem too low, and the amount of standoffs matched the mobo mounting holes wiwth nothing else protruding. It's a really solid board that did not bend when being attached. It's also possible to look down behind the board with the front cover off and see that nothing is touching it. Will breadboard it next, since I have to take it out, anyway.
3) Where exactly is the Bios version printed on the board? Click Bios reports version as 2.5 but appears that 1.4 is marked on the board. Have done no updates of any kind, only thing I did was disable the splash screen so I could see POST (like I could read that fast...!). Do I need to contact MSI to find out what Bios version actually shipped with this board? It's OK if I got an older board with updated BIOS, but it's confusing when something different appears to be printed on board.
Additional info: Phase lights - LED is lit and all lights flashed at boot-up. CPU temp running for three hours idle is steady 37-38C, mainboard system temp 25C. Went with a larger power supply because I intend to use Crossfire and more drives in the near future, but using onboard video for now. System to be used for graphics/video processing with multiple programs running.
I'm currently working from an ASUS M3A78-CM board with AMD Phenom 9650 2.4 GHz. I've never dealt with an MSI or an Intel system before, and the Click-Bios is something new to me. Alas, I'm not an expert, but I've followed the basic steps I knew. What did I do wrong, overlook or just plain don't know? I sure would appreciate another opinion before I give up. I'm amazed at the speed of this motherboard/CPU combo - it's probably more than I need, but I'm intrigued to figure it out.
Looking forward to those opinions,
Jilliebob

Quote
Do this, and while it is in the open re-examine your cpu pins w/ a bight light and hd zoom or a magnifying glass.
Thanks, xmad, I'll look at th CPU again tomorrow/next day under the glass when I take the board out. I already checked them under magnification and was leaning toward a funky board, but it never hurts to re-check. Eyesight is not what it used to be, for sure (I miss DOS, if that's a clue...). Don't want to flash the BIOS if not necessary, since it runs Windows fine and everything works except that RAM.
Bernhard, I don't have CPU-Z installed on that machine and don't want to install anything else until it's working normally. I'd never seen Click-Bios before and just need to get over my initial suspicion of something new! Also learn my way around it before I change anything. I'd never encountered a board reporting a bios different than printed on it. I've never messed with manual memory settings or done more overclocking than just a little exploratory and suprisingly successful nudge - if you could point me toward a good basic explaination of all those settings, I could learn from there.
Appreciate your input very much.
Have learned a lot just reading the threads here for the last few days. This is the best forum I've ever encountered. I'll report back - some suggestions in other posts resembling my problem ended with no resolution, and that's a shame because one doesn't know if it worked or not.

I have a 60 inch Sony XBR TV that has DVI input but not HDMI. I am using an adapter to get the video from my Apple TV, but the screen flashes a lot. Do I have any other choices other than buying a new TV?

I have a 60 inch Sony XBR TV that has DVI input but not HDMI. I am using an adapter to get the video from my Apple TV to the Sony, but the screen flashes a lot. Do I have any other choices other than buying a new TV?

Is this an iphone question?
You have posted in the iphone forum.

I need a replacement HD audio driver other than the IDT/Beats hunka junk.

Anyone out there know if its alright to install a HD audio driver (brandwise) other than the one that came pre loaded on my HP Dv6 A8 windows7 x64? Hp apparently has IDT by the short hairs, not letting anything get out without being overprocessed, compressed and enhanced to DEATH. Not only that but they've got to drag that insolent worthless F*up, Beats audio to every download. I've tried everything, from the generic system driver that comes with windows, to registry patches and still have every problem that everyone else has with this driver.
I only see a few ways through this and they are as follows
1.) Get a new sound card ( but I'm broke after paying 900.00 for this laptop)
2.) Build a cutom driver ( guess you gotta start somewhere 'eh?)
3.) Get the lo-down on a Beats-free Idt driver...........ANYONE?..anyone.......anyon..any........
4.) OR, get a thumbs up and possibly a link to the original question.
I'm afraid that all this messin' with my 'puter is gonna funk it up after a while. Kinda like a bad hair day, the more you fuss the worse the 'muss.
Help M EEeeee

Sprinks
I am providing you a link to an HP Support document called “Obtaining Software and Drivers” below. This document will demonstrate the different ways up getting your drivers. From Microsoft, to the HP driver page for your computer, to the original drivers that came with your computer.
There is nothing saying you cannot go directly to the audio manufacturer and download their drivers for the chip but there is no guarantee that they will work correctly as most times the OEM (in this case HP) request modifications to the hardware to suit the software requirements so they may not match up exactly. It is worth giving it a try though.
Obtaining Software and Drivers
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07165
Please feel free to re-post if you have any further questions or concerns.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I have an IPod touch 4 gen. And I'm having problems with the audio when I use other than Apple brand earphones

I have an Ipod Touch 4 gen. and I'm having problems with audio when I use other than Apple brand earphones. I'm talking about music only so far, when I use apple earphones all is fine, but if I use other type of phones ( sony for exemple ) I can only hear the music and the background but not the lead singer voice, can anybody explain this to me? thank you.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
- If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have an audio file that plays automatically and I can't control it other than reduce the volume. How do I turn it off?

I have picked up an audio file that I can't control other than reduce the volume. I don't know how to turn it off and it plays over any other audio.

Is this an Apple installed audio clip?
Have you checked to see if all of your browsers doesn't have a web page that is opened that has the audio? (Best thing is to quit all of your browsers to get that out of the way.) If it goes away, then find out which browser (if multiple), and then figure out what page or just close it if you wish.
Once you get the browsers out of the way and the audio is still playing. Then quit other programs.
KOT

This am I turned on my 4s and went to play some music and it was all gone, plugged into itunes and synced, now they are back, but other than 1 audio book they wont play

this am I turned on my 4s and went to play some music and it was all gone, plugged into itunes and synced, now they are back, but other than 1 audio book they wont play

they show up in my music, but they are like grayed out and when u click on them nothing happens, i can go to itunes on my mac and click on them and they play. should I install 6.0 or wait till i have this resolved

What other than the Apple Airport Express can make audio systems (speakers/stereos) play with airplay?

.

Besides the AppleTV there are many AirPlay - enabled devices available from various manufacturers other than Apple.
http://en.wikipedia.org/wiki/AirPlay:
"AirPlay wireless technology (receiver mode) is integrated into speaker docks, AV receivers, and stereo systems from companies such as Philips, Marantz, Bowers & Wilkins, Pioneer, Sony, and Denon.[9] Song titles, artists, album names, elapsed and remaining time, and album artwork can appear on AirPlay-enabled speakers with graphical displays."

MSI Z77A-G45 & Sapphire Radeon HD 7850?

Hi all, I have purchased the MSI Z77A-G45 Mainboard along with a Sapphire Radeon HD 7850. I just finished my build yesterday and got windows 7 professional installed without a hitch. This was using an HDMI cable to connect my monitor directly to the mainboard. For some reason, my computer cannot detect my video card (7850). Under device manager, it shows that the display adapter is a standard VGA. I know the video card is working because I just tested it on a friend's computer and it ran perfectly with drivers installed. I looked on MSI's website for the compatibility table and saw that the 7850 was missing from the list for the G45. Does this board support the sapphire 7850? Or do I have to buy a new board? I really like this board and got it at an awesome price so I would hate to have to return it but changing the board would be a cheaper option than changing the video card (which was purchased on line). Any input is greatly appreciated. Thanks in advance!

Quote from: mmkc on 23-May-12, 05:15:26
Corsair TX750 V2
thats a good psu! have you tryed another pci 16x slot on your motherboard you may just have a dead slot(its worth a try)?

Z77A-G45 no audio other than HDMI

Similar Messages

Maybe you are looking for