Z77a-g45 wont post after live update

Maybe someone could help me? I have been using this z771-g45 board for 5 months without problem, rock solid all the time. Except 4 days ago i used MSI's Live Update to update everything and after it rebooted it went into a constant restart cycle (on for 10 seconds the off) with no video, no access to anything. It had no post beeps. I let it continue for 10 minutes before I shut off the power. I have tried removing everything but the video and power to the board but still just loops. Any thoughts?

If the board is new, contact the reseller else contact MSI for rma:>>How to contact MSI.<<
If out of warrantly, you can also use a computer shop with spi programmer to get it fixed.

Similar Messages

  • Z77A-G43 login loop after Live update BIOS to V25.1

    Hi,
    Z77A-G43 windows login loop after Live update BIOS to V25.1
    I'm able to see the BIOS menu. But when i continue to login to windows, it loops.
    i would like to know on how to proceed on this. I tried safemode and i was able to login.
    I cannot find the clear cmos jumper on this board.
    Appreciate your response on this one. Thanks!
    edit: I just tried removing the board battery. But still encountering the same issue.
    -Paul

    There is no such BIOS version for this board.
    The last BIOS is v2.11  see here http://www.msi.com/product/mb/Z77A-G43.html#/?div=BIOS
    As for the CMOS jumper. This must be the most stupid saving that MSI has ever done. They leave out the jumper, obviously in an effort to save costs. 
    Check your manual to find the location of the clear CMOS pins. Then you need to short these with a jumper from somewhere else  or use a metal object to connect the pins.

  • Cannot Post After Live Update of BIOS

    System: MSI K8NGM2-FID, 4 gig Corsair, AMD 4400 X2, EVGA 7800GT, 4 Seagate 160 SATA II drives in RAID 0, HP 740vi, Sony floppy, CoolerMaster 810 Stacker case, PS Power & Cooling Turbo 510/SLI.
    I just assembled the system. It POSTed fine. I installed Windows XP (SP 2), NAV 2006, Linksys USB network card, MSI LiveUpdate. I updated the BIOS 3.0 to 3.1 using Windows through the Live Update and making a rescue disk. Nothing remarkable about the update. System will not POST i.e. nothing shows up on the screen although the lights on the Corsair memory go through the appropriate cycle and the keyboard lights shine as usual. Attempted to restore from rescue—can get the disk read using control home: still no POST. Same result after using the BIOS reset switch on the board.
    I get no automated to my message to MSI online tech support.
    What can I do?

    try shutting off, disconnecting the power cord, removing the CMOS battery, tap the power button a few times to discharge any residual power, then leave the battery out for a couple of minutes, before refitting it, then reconnect the power cable, power back on, enter BIOS setup and re-enter BIOS settings

  • K8T Neo Fir won't post after live update to 2.0 bios

    After running the Live Update which updated the bios to 2.0, I can't boot into XP (SP 1).  I can boot in safe mode.  Not sure how to get this running again.  I've tried everything I can think of, any ideas on what I might try?
    Setup was running fine prior to bios update.
    XP SP 1
    K8T Neo Fir
    1 GB
    Promise Sata Raid 1 - 2 80GB Sata drives
    Radeon 9600

    I tried executing "fixboot" from the recovery console but this may have made things worse.  After running this successfully, the console reported that it had written a new boot vloc on teh C partition in FAT32.  The SATA drives are not formatted in FAT32!  Now I don't get the Windows initial screen at all, it just goes back to the bios and restarts.  I can still startup in safe mode though.
    Maybe the Recovery Console can't see the drives properly because the Promise drivers are not loaded?  Any ideas?  I'm in deep now!

  • P67a-gd53 wont boot after live update

    my computors been fine for the last 12 months but for some daft reason i downloaded live update 5 last night and set it off
    today the computor was on when i came to it (after i turned it off last night)
    blank screen
    i pressed reset and it started looping initial boot
    comes on 2 beeps waits a few seconds fans running and shuts off
    few seconds later and it repeats
    comes on 2 beeps waits a few seconds fans running and shuts off
    all 6 aps leds are on during the boot
    im guessing something in the live update has killed my motherboard?

    Try pulling the PSU power cord, removing the battery for awhile, clear CMOS. If it will then get to the UEFI/BIOS screen, reset and see how it goes. If the OS was loaded under AHCI, be sure to remember to set the SATA controller mode again and also set the correct boot order.
    Added: And remove Live Update from your computer.

  • Wont boot after windows update

    M y Sateite A305 s6916 wont boot after windows updates tried to install.

    Satellite A305-S6916
    tried .. every option on F8
    Try this. Download a repair disc from here.
       Windows Vista Recovery Environment ISO X64 version (64 bit)
    If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
       Startup Repair: frequently asked questions
    Also try a System Restore.
       What are the system recovery options in Windows Vista?
    -Jerry

  • HT4623 what do u do if your iphone wont activate after u update it

    what do u do if your iphone wont activate after u update it

    You contact the carrier it's locked to and see if they will unlock it for you.  Activation problems are almost always due to the fact that the phone was hacked to unlock it instead of being legitimately unlocked.
    Of course, this can also happen if you're trying to activate it without a SIM in it. You can not activate the phone without a SIM.

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

  • 770-G45 wont start after ShutDown

    Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
    Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
    Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
    Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
    MS 7599 ver. 2.0
    Bios version 10.2
    MoBo is new bought it 3 days ago.
    PLEASE HELP!!!!!

    First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
    Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
    But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
    Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

  • 945p neo3 Problem after live update bios

    Hi,
    After I made the update trought live update, my computer doesn't start, I don't know what to do?
    When I restarted it only shows the logo, if I hit DEL or TAB keys it shows to the start of the boot but it freezes.
    I already clear the cmos, did anything that i had found on this forum, but nothing works.
    I don't have the chance of doing anything because it won't gets the part to enter in bios.
    It only appears in the screen thre lines:
    AMIBIOS 2005.....
    MSI 945PL Neo A7236IMS V1.9 Date: 08/07/06 08:05:52
    Intel(R) Core(TM)2 CPU               6400 @ 2.13 GHz , Speed:
    and nothing else appears.
    One of the things that is very strange is if my board is a 945p neo3 why it happears 945 pl neo, did the live update flash my motherboard with a wrong bios version????
    is what it looks.
    Any ideas to fix this, if there is a fix?
    I don't see anything, because the motherboard don't even reaches the process of boot, so I can't try to flash a other version of bios because the process never reaches the time to boot from floppy, usb, disk..
    HELP PLEASE,
    Thanks in advance,
    Nuno

    "Thanks for the ISO File, everything is now correct, the problem with the memory was related with checksum, now happears the 4096 MB."
    Nope they was 2 separate problems, solved with one hit.
    "About I couln't start your application, whith the historial of your application and antivirus that I saw on the post about it, i got suspecious right away of my antivirus solution.
    So to help, I uninstall and after that i could run it, I use Symantec Endpoint Proctection, is the corporate solution from symantec that is replacing the old one known as SAV - Symantec Antivirus Corporate Edition. I didn't find any  message in the logs of it, but the fact is that if I have this solution installed I could not run USB tool, if I Uninstall I could run it."
    Probably same resource conflict with your AV (some kind of system restriction) which cause Tool unable to proceed properly and terminating itself.
    Can't duplicate your issue. I was using SAV - Symantec Antivirus Corporate Edition(Up to date) till now and Tool perform well,
    Just installed and updated Symantec Endpoint Protection (Updated to latest definition with all protection activated) and the Tool perform well as expected too.
    "now happears the 4096 MB"
    Nice

  • Imovie wont open after mavricks update

    I movie wont open after updating to mavricks. help?

    Many people have been having the same problems this week because of he update. Someone on the forum mentioned uninstalling "Bonjour". +Bonjour locates devices such as printers, other computers, and the services that those devices offer on a local network - Wikipedia.+ If you have never needed it uninstall it. You could also try typing "MSCONFIG" in the Run selection under the accessories folder and un-checking it under the "Services" tab.
    I personally have had the same problems. What i did was i un-checked it on the MSCONFIG menu first and then uninstalled Bonjour.
    Hope all this helps

  • Office 2013 (Word, Outlook, Excel, Power point) are not responding after live update

    I had problems all last week with my Office applications not responding. I tried to uninstall and reinstall the software which did not solve the problem. I then did a samsung 5 recovery to factory state and installed office all over again which temporally
    worked. My computer then prompted a windows live update after which the same problem came back with windows application not responding.
    Please help as this is holding up my work.

    Hi,
    Please check your update patch list, if you had installed the Office 2013 SP1. please try to update the display card dirve. See the below thread:
    http://social.technet.microsoft.com/Forums/en-US/34401d63-6c3b-47e6-ab20-9ed9b70d890b/outlook-2013-sp1-unusable-since-sp1-update-?forum=officesetupdep
    Regards,
    George Zhao
    TechNet Community Support

  • MSI GT683 graphics slow after Live Updater

    Hi there, in a moment of boredom I installed the MSI Live Updater and allowed it to update the Intel Chipset driver and I think a usb driver.  Since doing so I have had a steep drop in FPS.  I've subsiquently updated the video drivers to the latest but its made no difference.  Has anyone else had this issue or have any suggestions?  Perhaps it's changed a setting?  Is it possible to revert to the previous drivers without rebuilding? 
    Thank you

    If you have reason to believe that the repair center did not repair or diagnose the laptop properly, then you have the full right to claim the repair under warranty even when Warranty is expired, up to 6 years after Purchase in Europe. The issue however is, that 6 months after purchase the burden of proof lies with the buyer.
    In other words, if you can proof that the problem with your laptop is not caused by you(mishandling, user error, etc) then the retailer has to take it in for repair under warranty.
    So the question is, have you been using the laptop on surfaces that it is not intended for? IN example, are you using the laptop on your bed, your lap etc while its venting and heating ports are closed off? Thus not allowing any fresh air to come in?
    Have you meddled with the fan speeds of the laptop?
    Edit : Take in mind though that this EU directive is very hard to proof and stores, unless you literally press them with a copy of said directive, will try to get out of it and even if you show them directive they may still opt to go with the countries sales of goods act.
    edit 2 : The directive in question is 1999/44/EC.

  • Laptop wont boot after BIOS update

    Hello
    i have a compaq CQ61-303SV laptop
    i tried to update the BIOS and i download the file form the hp driver and support website
    after i update the BIOS the laptop wont to boot and stop on a black screen
    what to do please ...

    Power down the notebook, disconnect AC adapter and remove the Battery, hold the power button down for a full 30 seconds, connect AC only, hit the power button and see if windows will load.

  • 3gs wont activate after latest update

    My Iphone wont activate after the latest update was installed, even when connected to Itunes it just say disconnect and install sim card, even though there is a working sim in the phone, any help would be gratfull.

    "We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care...Your request Could Not Be Completed?"
    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

Maybe you are looking for