Z77A-G65 and windows 8 mode shows no drives

I put the latest firmware on, and tried to install windows 8 pro after turning on windows 8 features mode in the UEFI setup.
I have the main drive on the system as a Samsung 830 128GB SSD the on the 6Gbit controller ports... then 2 2TB HDD's in RAID1 on the 3Gbit ports, which has RAID mode turned on on all the ports
when I go into the setup, it tells me no drives are available to intall on, any reason why this would be? I can find the drives fine if I turn windows 8 features mode off in the BIOS config for UEFI

Quote from: xmad on 16-November-12, 23:58:29
IRST= Intel Rapid Storage Technology
Win 8 didn't detect the drives during install until I installed the drivers, then it did just fine. I just included them on the flash drive with which I was installing. The install still didn't work so it doesn't really matter though as it fails when "preparing devices"
yes... I know what the IRST drivers are... they are built into the windows setup driver cache.... like I said I can see the RAID array without loading any drivers when I start up the windows installer for windows 8 in UEFI mode but with the windows 8 features not enabled...
BIOS -> Windows 8 Features > disabled
On Boot get boot menu, select UEFI: [Windows 8 Setup drive name here]
UEFI Setup loader starts, shows the windows logo for the loading screen
click install
Intel RAID array drives listed are showing up
that is with Windows 8 features disabled
BIOS -> Windows 8 Features > Enabled
On boot menu select UEFI: [Windows 8 setup drive name here]
UEFI Loader starts but now the windows logo shows up as a MSI logo (sign that windows 8 features are now enabled)
click install
Intel RAID array drives are no longer showing up on the drive list
if I didn't have the drivers already in the setup, why does the array show up in the first setup with the features disabled? you need them to see the array
something isn't working as it should because you sould see the same arrays in both scenerios, for some reason the drivers are not loading when windows 8 features are enabled but load fine when the features are disabled in the bios config

Similar Messages

Get an error for changing the windows authentication mode to the both SQL and windows authentication mode

I installed the SQL server Express 2008 R2 and then SQL Server Management Studio 2008 R2 . But during the installation, I could not choose the both SQL and windows authentication mode and an error accrued so I did that just with windows authentication mode.
Now, I want to change the windows authentication mode account to the SQL authentication mode but it shows me an error which is you do not have permission (Although I am the administrator in windows), what can I do?
Following steps are the steps that I went but I got an error:
Server properties >> security >> choose the option of SQL Server and Windows Authentication mode
and the error that I got is attached(access is denied)
Can you please help me?

You can change the setting after you gain admin rights to your SQL Server. You don't admin rights automatically, you have to explicitly add yourself during the install
Here's a guide on how to (re)gain those rights:
http://v-consult.be/2011/05/26/recover-sa-password-microsoft-sql-server-2008-r2/

Tungsten T3 Hot Sync in Windows 7 Ultimate 64 bit and WIndows XP mode

I upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not sync. I downloaded desktop 6.3, 4.1.4, and 4.1.4e. I tried all three in both windows 7 and windows XP mode which I am told is a 32 bit O/S but I'm really not sure. I have tried hot syncing in bluetooth in windows 7 the T3 and Laptop connect but it keeps telling me the port is in use by another program? Does anyone know what I have to do to get it to sync or am I doomed to throw my trusty T3 out? Any Ideas?
Post relates to: Tungsten T3
This question was solved.
View Solution.

Stan_R wrote:
link no longer works
You are correct, but you have pulled up a post that is over 3 years old!
If interested in syncing to a 64bit system, please view the sticky thread at the top of this section entitled "64bit Windows USB Drivers for Palm Desktop"...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I need to reinstall OX and my iMac only shows backup drive what does this mean?

I need to reinstall OX and my iMac only shows backup drive what does this mean?

Your hard drive has probably failed.

IMac running slow and windows partition not showing

I have an iMac 12.1, 2.5 ghz, i5, 4 gb ram, 500 gb hd (41 gb used) running 10.7.4. We installed windows parallel and windows 7 about three months ago. We rarely used windows and now windows doesn't work, although the icons are there. I tried to uninstall via boot camp and the partition does not show. The iMac is now running extremely slow except when running in safe mode.
How can I delete or reinstall windows and speed up the iMac?
Thank you

Open Console in Utilities & see if there are any clues or repeating messages when you try to launch Parrallels Desktop.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.

Problem with Win 7 x64, WWAN or WiFi card and Windows XP Mode

I have a T500 with switchable graphics (2056-4RU) with a clean install of Windows 7 Pro x64 with the AT&T WWAN card.
With all the Win7 RTM drivers and Access Connections for Win7, I had a problem that the WWAN card (Ericson F3507g, purchased from Lenovo and working flawlessly under Vista 32-bit) would not initialize. Support told me to uninstall the Win 7 versions of the Power Manager Drivers, WWAN card driver and Access Connections and replace them with the Vista counterparts, which restored the functionality of my WWAN card. Based on the speed with which the support tech came up with the suggested fix, I suspect I am not the only one with the disappearing WWAN card problem.
Now I have found that starting the Windows XP Mode virtual machine kills the WiFi functionality (Intel WiFi Link 5100 AGN) until I disable and re-enable the WiFi adapter in Device Manager and then restart the system. (I have not problems with XP Mode and with the Win7 drivers / Access Connections opening Windows XP Mode did not cause the problem with the WiFi.) Opening Windows XP Mode causes no problem with the wired network adapter on my system).
Thus it appears that I can have functionality of the WWAN and WiFi adapters with XP Mode using the Released Win 7 versions and functionality of Windows XP Mode together OR I can have WWAN but not WiFi functionality with XP Mode using the Vista drivers that support suggested. However, it seems that I cannot have WWAN, WiFi and XP Mode concurrently.
I reproduced the above XP mode / WWAN problem / WiFi problems on a T500 with Win7 x64 owned by another family member.
Does anyone (particularly anyone from Lenovo) have fix for this?
Thanks.

for the sim card, try this:
http://jack.ukleja.com/update-ericsson-f3507g-mobile-broadband-on-windows-7-with-lenovo-thinkpad/com...
I have another operator and I finally gave up. apparently it's also no that easy to install the SIM card, if the plastic thing that helps to remove the SIM card is not the right position, it will overlap the SIM Card chip.
can't help for the WIFI. I had the problems too with access connection and decided to remove it. I use Seven's network manager, which does an equally good job.
Since I have the switch to turn off the wireless, I don't really need access connection anyway.
Finally, something that I learns while struggling with the bluetooth driver: the order in which power manager, access connection and the different drivers are installed DOES affect their effectiveness. I forgot the details but I remember 2 things:
always read the TXT file that is available on the driver page on the lenovo web site and install power manager and access connection last.
Good luck

[SOLVED] Pcmanfm and Thunar do not show pen drives after udev upgrade

Hi all,
I upgraded Arch today and found that my usb pen drive was not showing up in Pcmanfm available for me to mount. I reinstalled Thunar from my cache and found it too could not 'see' the pen drive. I first tried downgrading hal to the previous version, and that did not fix anything.
I then downgraded udev to the previous version and found the usb drive correctly appearing in both file managers.
I checked /var/log/daemon.log and found no errors. There was nothing to indicate anything had been mounted before I had downgraded udev.
Please advise me on anything I should do--is this a bug, should I investigate further, or have I forgotten to configure something new?
Thanks.
added: I checked bug tracker and there seems to be a new bug related to mounting of an NTFS drive possibly due to udev. This is a FAT32 pen drive, so I am not sure if it is applicable...
http://bugs.archlinux.org/task/11675
added again: rebooting fixed it for me. Thank you everyone.
Last edited by mentallaxative (2008-10-08 17:02:44)

I noticed this happening as well after my upgrade yesterday (PCManFM and Nautilus). But then I remembered to ... reboot and everything seems happy again.
PS: This includes VFAT, ext2 and NTFS formatted flash drives
Last edited by ninian (2008-10-07 19:17:40)

Z77a-g43 and power save mode

All parts are new.
ASUS gf gtx 560 ti dcII top, corsair 8 gb memory, intel core i5-3570K, 3,4GHZ soc 1155, corsair 600w, msi Z77A-G43 Intel Z77 1155 ATX
Everything was running just fine for one hour. Loaded windows 7 /64 and some servicepack. Then suddenly I got the "power save mode". I´ve tried a different graphic-card with the same result. Took out the bios battery but that didnt hlp. Then tried another corsair 600w but no... The comp. starts, but with a black screen. No usb is working. Tried the blue vga on the motherboard but still a black screen. No beep.
So, what to do? Buy a nother mb?

Here are some other ideas:
1.) repeat the process with a single stick of ram try each stick / try different dimms to see 1 stick is fault or a dimm is faulty.
2.) Remove and re-seat the cpu, while the cpu is out, check the pins for damage.
3.) Remove the mobo from the case and check for foreign objects shorting it out, while it is out, build the computer on a non-conductive surface with 1 stick of ram, cpu, cooler and psu and test.
Pay careful attention to extra stand offs under the motherboard.

My Firefox continues to stall a lot and Window Task Manager shows that Firefox is using a lot of memory (600,000k +) What can I do to make this stop stalling?

I play Farmville or on Pogo and my computer keeps giving me the hour glass and when I look on my Windows Task Manager it shows that I am using over 600,000 k of memory. When it does that I can't do anything unless I just use the power button to shut the computer down or use the task manager to "End Process". I do not like to do either of these so I usually just sit and wait for it to fix itself then later it does it all over again.
Also when I was doing defrag on the file type tab it showed two Mozilla Firefox so I am wondering if this is the issue but I only see one in the control panel.

I play Farmville or on Pogo and my computer keeps giving me the hour glass and when I look on my Windows Task Manager it shows that I am using over 600,000 k of memory. When it does that I can't do anything unless I just use the power button to shut the computer down or use the task manager to "End Process". I do not like to do either of these so I usually just sit and wait for it to fix itself then later it does it all over again.
Also when I was doing defrag on the file type tab it showed two Mozilla Firefox so I am wondering if this is the issue but I only see one in the control panel.

SSO and Windows Native Mode Benefits?

Hi All
We currently run EP7 SP8 and I need to find out what the benefits are if we move to Win2000 or Win2003 Native mode. Also if we can use SSO with Win2000 or Win 2003.
Does anyone have any information which would help me weigh up the pros and cons of implementing this.
Many Thanks for your help
Phil

thank you for your reply,
Metalink note 277382.1 is a good document how to configure OID External Authentication Plugin for Authentication Via Microsoft Active.
configure OID for import users and External Authentication Plugin are a prerequisites steps for SSO WNA. but WNA must more other steps not descript in this metalink note
N.B: WNA "Windows Native Authentication" is a feature for Oracle SSO which enables Microsoft Internet Explorer users to automatically authenticate to their web applications using their desktop credentials.
thanks

Secure boot not working with MSI Z77a-G45 And system reserve not showing

Ok so i re did my windows after i did a zero fill on my hard drive as it was showing a corrupted sector on my disk that seemed to fix it for now, until it comes back if it does crossing my fingers it gone for good. But now i can't seem to get Secure boot to work i mean i did not have it before as i just slapped the motherboard in with a existing windows, that was to be expected but this is a clean install of windows 8.1 and i even have secure boot on but its not working and reports as off in windows. Is it because i have my bios set to legacy+UEFI??? would that make secure boot not work??. i even went as far as turning it off and back on again the secure boot setting nothing made a difference. I mean its not a big deal bit would be nice to know why its not working, also another wired thing and i will post pictures of it, as i cant see my system reserved partition in disk management but diskpart says it there, i will post those pictures any ideas??.

fixed it is my legacy+uefi another forum got back to me.

Re: Z77A-G41 and Windows 10: NX issue

Execute Disable Bit in CPU features enabled?

Dear huijbers
Maybe you are right, but when I clean install of Windows and then install Killer Suite, which has got:
QuoteKiller Wireless-AC / Wireless-N / E2200 Installation
Software and driver version numbers:
Software/Package Version: 1.1.55.1530

G510 and Windows 7 - can't install driver

Hi!
I have a problem with driver installation on my G510 notebook with Windows 7. I've installed all drivers, and only two had left: "Unknown Device" and "PCI Simple Communications Device". After installing the Intel Power Management Engine, the "Unknown Device" had disappear (installed successfull), but second one is still not installed. VendorID (8086) and DeviceID (8C3A) suggests, that this is Intel Power Management, but this driver is allready installed.
I tried to install different versions of this driver (even for Win8), but nothing changed. Google says nothing on my problem. What else can I do? What am I missing?
Regards.
Solved!
Go to Solution.

Downloaded the file directly from Intel. Works fine now.
Too bad, that Lenovo can't provide proper drivers (Win7 x64) for their notebook. I've noticed several driver problems:
- Intel Graphic Card driver, can't recognize the device (had to download directly from Intel),
- AMD Graphic Card driver installs ok, but system shows error in Device Manager (had to download directly from AMD),
- WLAN driver setup finishes ok, but the driver is still not installed (had to download driver for diffrent notebook model),
- Power Management driver can't install all used devices (had to download directly from Intel).
Regards.

Windows Device Manager shows several driver problems

I have the latest EFI Firmware update and Boot Camp 1.1.1. Windows XP Pro SP2 shows problems in the Device Manager.
(1) What's the USB Human Interface problem? I have no funny USB devices connected.
(2) What's with the yellow question mark at Base System Device?
(3) I have four PCI Express ports flagged with problems.
I'm guessing that the Boot Camp Driver CD has omitted to provide for these devices. I am surmising that many others who have the Mac Pro also see these problems.
Is there any way of dealing with these and fixing the problems? Like, can I download the required drivers from Intel? I have already downloaded and installed INF Update Utility [INFINST_AUTO.EXE] version 2.11.15.0. This was no help in resolving the problem.

I too have had issue with Bluetooth keyboard, specifically the Apple keyboard. It seems to be running ok at the moment but it took me a while for it to pair properly. I still have no idea as to what I did differently that made it work. I think it was pairing them without a code.
Fortunately for me I use Parallels mostly as it's far more convenient so I'm not too bothered about Boot Camp driver support at this moment. When it comes time to play some games though that'll probably change.
The thing with Boot Camp is to be a little patient. Yes we'd like Apple to have sorted everything out a month ago although the software is still in beta form and does not need to be finalised until the realese of Leopard. Hopefully they will get things together sooner rather than later given the clock is ticking.

Satellite P50-a-144 and Windows 8.1 - Webcam lost driver

Hello
I bought a Satellite P50-A-144 and now after Windows and Toshiba updates the webcam doesn't work.
In the device management webcam disappeared and I have an advice with a message: composite device USB.
I don't find webcam drivers on Toshiba site. Could you help me with a link to the usefull drivers?
Thank you!

Hi Adri
In the past Toshiba has offered webcam drives for Vista or Win7 but on Win8 machines there is no Toshiba driver anymore. Notebook uses Microsoft drivers. This is the reason why you cannot find webcam driver on Toshiba download page.
Be careful with updates installation. In my opinion you should deactivate automatic update option and before you start updates download and installation check up which drivers are offered. Install important updates but be careful with stuff listed as optional updates. Drivers listed there should be installed from Toshiba download page.
To be honest I don't know what went wrong with your machine but try, if possible, to roll back OS to earlier time before you have installed these updates to see if webcam works again.
Out of curiosity: have you created recovery media following instructions in users manuals document?

Z77A-G65 and windows 8 mode shows no drives

Similar Messages

Maybe you are looking for