Z77A GD 65- Control Center + Click BiosII updates now not working.

Hi, I have the Z77A GD 65 mainboard. Just switched on and there was an update for Live 5 so I installed that, I was then prompted to update Control Center and Click BiosII so I did so. When I try to run Click BiosII I get an error msg telling me that it as been removed and I cant run Control Center has it dosent seem to be present on my pc at all.

Quote
Still cant get it to work. It just stays on the splash screen and nothing seems to want to load. I am thinking that my orig bios update was no good, should I try the second bios?
Switch to your back up bios and see if all is well. If it is, uninstall live update and check the website periodically for updates.
If a bios update is nessesary: >>Use the MSI HQ Forum USB flasher<<
You may also switch to the other bios once the flash tool has loaded to re-flash the corrupted bios. In other words, boot using good bios into flash tool, when the screen comes up asking for input, reach in and switch to the bad bios. Proceed with flash.
Not a bad idea to run memtest first which is on the tool.

Similar Messages

  • IOS 6 update-now not working right

    My iphone will not connect to icloud.  It keeps saying verification failed-server is invalid

    Experiencing similar problems with both me and my wife's iPhone 4S's. My phone's speaker was muffled until I played a song, then it seemed to work ok. My wife's will not work at all except for when you adjust sound settings (e.g. changing the alert sound). Then it works only during the "test" and reverts back to its broken state.
    P.S. And yes, I've rebooted both numerous times. This has no obvious affect.

  • HT5858 My control center is opaque gray and not translucent. Why?

    My control center is opaque gray and not translucent. Also happens with my notification center.
    I tried restoring several times but in the end is always the same.

    A Community Specialist recommended to go to Settings -> General -> Accessiblity and turn off 'Increase Contrast' in this thread: https://discussions.apple.com/message/23026678
    They also stated this:
    "Keep in mind that if your background is white or a light color, it will not appear to be translucent, and be more opaque."

  • Skype click to call is not working in Safari 6 wit...

    My Skype click-to call is not working on Safari 6 with OS X 10.7.4.  The number highlights, but when I click on the number, nothing happens. I do have Skype installed on the computer and it works fine. I am running Skype for the mac 5.8.0.1027 and skype extension for safari 2.1.0.10405. I have two other macs which are running OS X 10.6.8 and Safari 5.1.7 and the click to call (2.1.0.10405) works great on both of those. I can not get it to work on the mac running Lion. Any help? Thanks

    I reverted back to Safari 5.1.7 from Safari 6 and now Click To Call works.
    For anyone wondering how I did this, you can view instructions here:
    http://apple.stackexchange.com/posts/59342/revisions
    I am new to using Macs and was able to follow these simple instructions. Takes a while for Pacifist to install 5.1.7, but it's worth it to have Click To Call working now.
    You will not be able to do this if you have Mountain Lion as Mountain Lion requires Safari 6.
    Lastly, the next time you update your Mac and it asks if you want to upgrade to Safari 6, say NO. At least not until you see that a fix has been posted here in these forums by either Skype or Apple.
    P.S. I posted this reply using OSX 10.7.4 and Safari 5.1.7

  • Ms updates does not work after recovery win 7 pro on dv4-2167sb

    info on problems with MS updates right after a new install of win 7 pro: does not install updates and will not install SP1 from down load . I used recovery disks I made. The OS [win 7 pro] recovered great but MS updates did not work from  the get-go..  {Personal Information Removed} HP NEEDS TO GET ME OS RECOVERY THAT WORKER I HAVE 4 OF THIS DV4-2167SB 'S
    Been on the phone with hp [not US] for more than hr.  talked to two svr. hungup on 3 times,  HP needs some New VP's.

    Hi VP_IA_DOT,
    I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.
    Thanks,
    NicNac - HP Support Forums Moderator
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • The click at touchpad is not working, please help!!!

    I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!

    For this issue AppleCare support told me to so a SMC reset as follows:
    Power the machine OFF.
    At the SAME TIME hold down the following buttons:
    Shift
    Control
    Option
    Power
    Then release all buttons.  Power up the Macbook and see if the trackpad button work.
    Hope this helps.
    Bill

  • Double click select all does not work in web site's search area after going back.

    After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
    This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

    Bugzilla has a different login system, unfortunately.

  • TS1718 I tried to update, did not work, unintstalled did not work.  Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable.  Looking for itunes64.msi path.

    I tried to update, did not work, unintstalled did not work.  Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable.  Looking for itunes64.msi path.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Windows update does not work after using System recovery disk

    I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
    Solved!
    Go to Solution.

    I get errors saying A problem is preventing the troubleshooter from starting.
    That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
       Trouble with reinstall of Win7 64 on a L505-ES5018
    The fix was to install a new hard disk driver.
       Intel Rapid Storage Technology
    -Jerry

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

    Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
    If extensions aren't causing the problem, see below.
    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

  • WSUS "Self-update is not working" after new certificate

    After creating a new self-signed certificate in SBS 2008 wizard we get the following error:
    Text: Self-update is not working
    Source: Windows Server Update Service
    Event id: 13042
    I know that it must be something simple. But I can not find the solution.
    Can anyone help me with this problem?
    Thanks

    Hi,
    Based on your description and this error message, this issue may be caused by:
    The Default Web Site is not running and/or has a site binding for SSL (HTTPS).
    The Selfupdate virtual directory has the "Require SSL" checked under the SSL settings.
    For more details, please refer to the following KB and check if can help you to solve this issue.
    WSUS 3.0 Self-update is not working on Windows Small Business
    Server and Event ID 13042 is generated
    If anything I misunderstand or any update, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

    I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

    There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

  • My auto updates are not working. I cannot find where to download Camera Raw 8.1 for Photoshop CS6.

    My auto updates are not working! I cannot find where to download Camera Raw 8.1 for Photoshop CS6 (Windows 8 64 bit). My Camera Raw is now at 7.1. I had the online Adobe folks tell me to just download all updates manually. That's great, yet I cannot find camera raw 8.1 to download...
    Please help.
    Thanks, Janet

    there's a direct download link on this page: https://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now- available.html

  • Update will not work, I get an error message that says error 7 (windows error 126

    The new update will not work for me, I am running Windows Vista. I have never had any problems installing updates before, but this time I get a message
    So I found the directions to uninstall itunes, I uninstalled itunes, apple software update, then I am unable to uninstall apple mobile device support. Since it says to uninstall them in order, I didn't go any futher. I did restart and got this message
    I tried redownloading and reinstalling but I am back to where I started from, can someone HELP?
    Thanks

    This is asked and answered dozens of time each day.  A forum search (right side of this page)  will find answers to many questions like this quickly.
    Disable your firewall/security software and try again.

Maybe you are looking for