Z77a-gd65 i7-3770k will not drop multiplier when idle windows 8

New to the forums here! my setup is a z77a-gd65 i7-3770k with windows 8, and recently i've had a weird issue where no matter what my cpu stays at a constant x39 multiplier according to CPU-Z (version 1.63.0.x64). i've tried just setting all BIOS settings to default to no avail. Then I tried a simple turbo clocking method where I set all 4 core limits to 40 just to test, kept c1e and cstate options enabled, disabled speedstep, enabled enhanced turbo, and used xmp profile for memory, all other things default, and it's still stuck at x39 according to cpuz. Is there anything else I should check?
I basically want a simple oc for now where it idles at x16 and goes up to xwhatever when the cpu is being used. i just find it weird that after messing with some settings the multiplier never changes.
Thanks for your help!

Quote from: xmad on 26-February-13, 06:07:58
Just set those to default then set it to balanced. If it throttles you know it is the settings.
Otherwise, you might want to try updating to the most recent bios. >>Beta BIOSes<<
I'll give that a shot after work and report back

Similar Messages

I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new.   They will not drop into either folder. Nothing happens.

I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new.   They will not drop into either folder. Nothing happens.
I checked my secondary harddrive and there is plenty of memory.
I emptied my burn folder but the photos still will not drop into it.
I created a new burn folder, no luck with this either.
230 photos is the maximum size of the events I am trying to move from iPhoto to save elsewhere.
I have shut down and restarted my computer.   No change. The photos still will not drop out of iPhoto.
My Mac Computer Storage shows that I have 62.2GB free out of 249.2GB (movies, photos and contacts taking up the most space)
My Lacie External Harddrive (2TB capacity) shows that I have 1.79TB available. It shows that 207,729,520,640 bytes (207.73 GB on disk) are used.
I have never had this problem before. It is usually very easy to move my photos from iPhoto.
I am not a computer expert (I work in surgery so don't have a need for lots of computer knowledge) so please explain in simple terms.
Thank you so much for any help you can provide.
I really appreciate it.

YES Terence! Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop.   But that doesn't explain why I'm having to go that route now.   Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore?   I really liked the convenience of the click and drag option.
I don't have the time tonight to export and burn a lot of CD/DVDs. I'll try that tomorrow and make sure my photos are moving properly. I also need to export photos to my external hard drive to make sure that route is working.
Wouldn't you know that my Apple Care Plan runs out this Wednesday?! I need to make sure everything is working properly before that expires.
Thank you so much for your help.   I really, really appreciate it.

My ipad mini icloud storage will not drop below 2.5 GB.

My ipad mini icloud storage will not drop below 2.5 GB. I have deleted/OFFed everything. Still at 2.5?!?! I have removed and restored account. Still at 2.5. When I turn on larger apps like iMovie and garage band, it will go above 2.5, but never below. I have turned off all apps and all things like mail, contacts, calendars, reminders, safari, photo stream, and documents. Still 2.5. I also have an iPhone linked to the account it is using 911 mb's of storage,
I will not buy more storage.
Hopefully someone can figure this out
Thank-you,
Jeanmarie

When you turn off mail, contacts, etc on your devices, that does not remove them from the icloud server; it just prevents the data from syncing to the device. Your email, for example, remains on icloud until you delete all of it. Same for contacts, etc. Have you done that?

My 27 inch iMac screen will not hold position when I move it. It just drops back to the lowest position.

My 27 inch iMac monitor tilts forward and will not hold position when I adjust it up.. Is there a tension adjustment for the monitor position?

That is a hardware issue that will be covered under warranty if the machine is a 2012 or later iMac. Bring it into your closest Apple Store or AASP for repair.

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2. need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?

Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

My bookmarks bar and toolbar do not drop down when Safari is in full-screen mode.

I just updated to Safari 5.1.5 this morning as well as OS 10.7.3 and when in full-screen mode, the bookmarks bar as well as the toolbar will not drop down. Once I escape then I can see them fine. I'm also having issues with dragging or dropping ANYTHING. A gost image of what I am trying to move shows, and will not go away unless I force quit Mail or Safari. Needless to say, what I ws attempting to drag and drop does not take effect.

Hi..
I just updated to Safari 5.1.5 this morning as well as OS 10.7.3 and when in full-screen mode, the bookmarks bar as well as the toolbar will not drop down.
Click the title bar one time. The gray area of the window at the very top of your screen in full screen mode.
Not sure what you mean by, "anything", when dragging and dropping. Right or control click the content. There may be an option for saving that data for you from the menu.

Menue bar does not drop sometimes when in Safari Mountain Lion

When in Safari on Mountain I have had a few occassions where the menue bar will not drop down to close Safari

I have this problem too!

Post Moved Galaxy-Note-dropping-Wifi-when-using-...

Pot moved http://community.bt.com/t5/Other-BB-Queries/Galaxy-Note-dropping-Wifi-when-using-HH3/td-p/671308
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I think I found the answer to my own question (no thanks to Verizon)!
I found this article online which was written recently (2012) and explains the WIFI - Bluetooth interference pretty well. Here is the link:
http://www.ecnmag.com/articles/2012/03/wi-fi-and-bluetooth-coexistence
The way it has been explained is that if the WIFI & BT radios are on the same chip and using the same antena to send and receive, they WILL interfere no matter what. Having them on two different chips is the best way. But Frequency Isolation (Adaptive Frequency Hopping (AFH)) is a way to reduce interference when they are both on the same chip (as it is in Galaxy Note 2 & S3 - they have Broadcom BCM4330 for wifi/bluethooth/FM) which I guess needs to be addressed in a software update (or may be it already has and is not working well). The last solution is to use 5GHz band for WIFI.
There you have it. But please let me know what you think and if you have found out anything else.
Thanks

Will Not Copy After Being Idle

THIS IS A COPYING ISSUE!!! After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print. I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem. Consequently, we purchased a new HP 5740 printer The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work. If you then turned the printer off and immediately turned it back on, it would copy. Again, Comcast reiterated it was a printer problem. I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer. After hooking up the second HP 5740, the same problems with copying occurred. I returned the second HP 5740 to the dealer for a refund and left town for three months. We recently returned and purchased a HP ENVY 7645 printer from another dealer. We are having the same issues with this printer as we had with the two previous HP 5740 printers. I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician. The installation occurred today and we are still experiencing exactly the same problem. The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy. He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem. DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

Hi @lamoso,
Welcome to the HP Forums!
I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
Let's see what happens after giving these two steps a try!
Thank you for posting!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I downloaded an app in the itunes app store on my pc and it's in my library, but it will not show up when i click ipod then apps?

I downloaded an app in the itunes app store on my pc and it's in my library, but it will not show up when i click ipod then apps?

You need to sync the app to the iPod
iTunes: Syncing media content to iOS devices and iPod
Is the app compatible with your model iPod and iOS?
Are any Restrictions set that would prevent installing the app on your iPod? Settings>General>Restrictions
Do any apps no sync to the iPod?
Does any media now sync to the iPod?
Have you successfully synced aps to this iPod from this iTunes library before?

My mac will not show images when on the internet?

My mac will not show images when on the internet? I think I have inadvertently changed some settings but nor sure which one.

I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences. Under the Apperance tab there is a check box that is called "Display images when the page opens". Check if that is unticked.

I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

My IPod Touch 4 Gen will not respond and when I try to Restore it it gives me a code 1601 how do I fix it?

My IPod Touch 4th gen will not respond and when I try to restore it, it gives me a code 1601 how do I fix it?

- Try another USB port.
- Try on another computer
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

My Reminders app will not open. When I try to open it, quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?

My Reminders app will not open. When I try to open it, it quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?
Also, the Calendar is loading very very slowly, and sometimes it quits and gives me the same error message as above.

The problem has been fixed with the most recent OS X software update.

My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

Z77a-gd65 i7-3770k will not drop multiplier when idle windows 8

Similar Messages

Maybe you are looking for