Z77a-GD65 - Thanks for the help before _ one last question
-
you guys were very helpful re - Pcie lanes , and we are probably going to move in future to one of the suggested boards:
my problem is i have 4 cards in the GD65 all in 1X slots _ the encryption software runs them at a full type pace.
1X is fine as I'm not gaming , just solving "xxxCoin" blocks .
at the start everything ran for about 24 hours, but now within 8 hours i will notice that the Blue LED light system is full lit up and everything is frozen - i have been working on the program dialing down the intensity slowly to find the problem, but any suggestions?
I have to power off manually if this happens , but all the fans on the cards stay at the same RPM (i.e as high) but the blue LED is full lit and everything is frozen.
as opposed to now there are 2 leds lit in normal operation.
any pointers?
OK guys sorry about that.
I should know better sorry i was rushing , OK i believe have figured out the general problem.
the Blue Led represent HD activity normally when they get stuck solid the OS had frozen , I have narrowed that down to bad power..
oh sorry I'll add MAX REVO 1500W PSU to my signature -
I have a meter on the point, at full blast the 4 cards and the mobo etc are pulling around 1150 to 1200w oh the 1500w Max REVO.
We have notoriously bad quality power where i live , (the whole suburb) (they have and actual sign up in the main street announcing they are working on it )
SO here is my Question:
Does the the Z77A-GD65 have what might be called "Watch dog" where the Bios polls the OS for a response and if it does not get one then restarts the system, my Brother is a Sys engineer he said a lot of Servers have it ?
this would be very beneficial to me as its always when i go out that of course the power screws up and i come back to find a frozen or switched off computer , but if i had this feature i could just run a . BAT at the start-up and be back online working again after reboot.
thank you for any help !
Similar Messages
-
I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.
Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting). -
Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.
Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox -
I was setting up my Airport and thought the first set up dod not go through, then I set up again and ended up with two wireless accounts. I use it for the prointer and the iPad, and I can see both accounts in the iPad. How do I get rid of one account? Thanks for the help!
me.com accounts can be used for iCloud. See the FAQ section in:
<http://support.apple.com/kb/ht4895>
but it may be too late if you have already created a new AppleID.
A few years ago Apple said they were working on allowing account merging, but it never happened (maybe objections from copyright holders). -
I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!
Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post. I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store -
I downloaded the "pages" application, to be used like " word", but I don't know if I can use it also to revise documents ....so as to make corrections and they appear on the text. thanks for the help
tatarapido wrote:
I downloaded the "pages" application, to be used like " word", but I don't know if I can use it also to revise documents ....so as to make corrections and they appear on the text. thanks for the help
Why repeat the question in the description area? That provides no more information than just leaving the description area blank.
Yes you can edit documents in Pages. What can you not figure out that you want to do? Have you transfered a document to the iPad and opened it in Pages and tried to edit it? -
My thanks for the help. Removing iTunes and Bonjur and then reinstalling did the trick!
Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Since updating my iPhone 4 to iOS5, my music stats (play count, last played, etc.) no long sync to iTunes. How can I fix this? Thanks for the help.
If you have any podcasts in your iTunes library you should see a Podcasts sync setting tab to the right when you connect your phone and click on its name on the left sidebar (see image below). On this tab check to sync podcasts and sync your phone.
-
im new to macs and im having problems connecting my ipad2 to my mac pro. i figured that it was the same percedure as hooking a ipod to a pc.... thank for te help!
Open iTunes with your iPad connected. It should be listed in the Devices section of iTunes sidebar. Select it. You should now see a window with several tabs across the top. You configure what you want synced under each tab, then sync.
You can download a PDF or iBook version of the user guide here. It contains detailed instructions on using the iPad, so I recommend you read it. -
Kudos to Kiesha #1239 and Ramesh in Kuala Lumpur for helping me set up my WRT54GS. One observation, however. When I told Ramesh I couldn't connect to the internet, he replied I had to in order to reconfigure the router. This aroused great frustration since I assumed I had to be plugged into the router in order to reconfigure it and couldn't connect with the router plugged in. Later it became clear that I needed to first disconnect the router and connect directly to the internet using the (satellite) modem. Ramesh might want to ask (and tell) the customer to first disconnect the router and then connect directly to the modem -- that we will reconnect the router later.
One other point.... When pressing the reset button, one needs to hold it in for a minute. A momentary press and release won't work -- even though a nieve user might think it does.
Again thanks for your help!!Randy,
Hope it did not cost you too much beer. :D
Good to hear you found the problem. Also, New Egg is a quality e-tailer and they take care of their customers, unlike many others out there in cyberspace.
Take Care,
Richard -
NumberFormatException problems. Thanks for the help
Hi,
Thanks for your help.
I also tried using parseInt() method from Integer, but came up with the same exception:
java.lang.NumberFormatException: 8
from the line sets = sets.valueOf(buffed);
Here is the code in question:
String buffed;
String cuffed = " ";
Integer sets = new Integer(1);
buffed = in.readLine();
System.out.println(buffed);
sets = sets.valueOf(buffed);
int total = sets.intValue();System.out.println(buffed) pulls the string "8", as it should: the in.readLine() is using a dataOutputSteam type "in", and reads the line, which consists of 8 and ('/n').
If anyone can offer a reason as to why this is happening, I'd be very grateful. Thanks for your time and consideration.
chickenmuncherHi,
Thanks for the advice. Unfortunately, I confused myself, and I actually used the Buffered Reader object "in" and not the dataOutputStream object. Actually the file I'm reading is a txt file created by a dataOutputStream. This seems to create a buffer around the actual character so that when I do
BufferedReader in = new BufferedReader();
String unparsed = in.readLine();and say the txt line was output in the form
DataOutputStream out = new dataOutputStream();
String salsa = " ";
out.writeChars(salsa.valueOf(count));
out.writeChar('\n');, where int count = 8, I get back a string of length 3 such that
char[] twisty;
twisty = unparsed.toCharArray(); returns twisty[0] = "[
twisty[1] = "8"
and twisty[2] = "[
This seems very odd to me. How do I get rid of the borders surrounding "8", and how did they get there in the first place?
Again, thanks so much for the help, and sorry for the misdirection in the first question. Thanks for your time.
dchickenmuncher -
Just want to say thanks for the help....
i am recovering from cervical spine surgery and being board my wife told me to find something to do so i got this r61 from my neice(for free)it's in mint condition looks like she never used it,(she didn,t have a finger touch board and didn't like it)thanks for all the help this r61 it works great ... i installed a 4g ram, 160 gb hard drive, palm rest with touch board and finger print reader
.. put $60 the parts and it works great...once again thanksHi,
Welcome to Lenovo Community Forums!
Nice to hear that your Lenovo ThinkPad R61 is working great. Please feel free to post back in Lenovo Community Forums if you have any further query.
Wishing you a sooner recovery!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Very helpfull forum, thanks for the help.
Hi Guys,
I just wanted to say how helpfull this forum has been for me in my decision of whether or not to get a Mac Pro.
I have now put in my order for one so get ready for more questions when it arrives!
Thanks for everyone that has helped me out.
All the best
AndyWe're always happy to help someone spend their money!!
-
K8N -Thanks for the help - Need to be a little quieter
AIM: to build an ass kicking video editing & music production PC
Just wanted to say thanks to the peeps who contribute to this forum. Although I have only just registered I have been coming here for the past month and have put together all the missing pieces of my first ever PC Build project. My previous experience was to upgrade the odd part. This forum has enabled me to make the equipment choices, tackle the engineering & build (including fitting the CPU fan which was my worst worry), update the bios & load the drivers & software in the correct order. 99% of the items have been sourced from eBay to save money and so far no DOA's.
Still got some way to go, so any suggestions regarding my future upgrades would be welcome…..
The Winfast graphics card is possibly the weakest link (borrowed from my outgoing PC) and I am looking for an ATI x800xt PE vivo.
Looking to replace the HDD with two WD Raptors in Raid?
Not sure If I will fit My Terratec Sound Card (the front plate has all the connections which is not good for the door on the front of my case) or to go the Audigy way?
I have no idea how to overclock and not sure if I need to go this way for video editing, if yes would the dane-elec memory need to be upgraded? How do I test this?
I gather from previous posts that once all this kit is added I may need to be upgrade the 400w PSU due to a shortage of amps? I am a little reluctant as it is almost totally silent @ 14db. I like the look of the OCZ moonsomething?
Finally, the case Tsunami Dream case is a little noisy. I just purchased some acoustic absorption mats to help. Has anyone had any luck changing the stock Tsunami 120mm fans to quieter ones?
Thanks AgainHi. Happy you have found the forum helpful.
I would buy a good PSU first. Otherwise you risk damaging your new equiment. Recommended makes are Enermax, Tagan, Hiper and OCZ with amps on the 12 rail at least in the mid twenties, but preferably around 30.
For video cards, I have preferred nvidia-based cards in recent years because of their better driver support. The 6800GT is a good choice. The ultra version, IMHO, is not worth the added cost since you can ususally OC the GT ot ultra speeds.
Raptors in RAID offer the best performace but suffer a big price premium over 7200 SATA drives.
I would leave the Audio issue for last. You just might like the on-board audio.
Deciding whether to chage the case might be the very first thing to decide since it would be awfully inconvenient to install everything and then have to resinstall because of a case change. I wish there was a way to get a totally silent case/fan combo, but I don't. Maybe someone else will help you on this.
Good luck. -
Question on "MacKeeper"..Thanks for the help!
Thanks to the members who sent me info on MacKeeper...bought it anyways...yeah I know.
and willl check out Onyx too..yes. you need to buy a Snow Leopard retail disc (online or from the Apple store) for $29 USD. Then run software update to get to 10.6.8. Then access the app store and download Lion, also $29 USD. Make sure your mac meets the technical requirements by googling "snow leopard technical requirements" and then "Lion technical requirements".
Maybe you are looking for
-
What is an affiliated company?
The enterprise structure is like this :- Company Code : A and Company id : G Company Code : B and Company id : G Company code A sells an asset car to company code B. A vendor account V001 has been set up in company code B for company code A. The trad
-
The CD/DVD Drive on my H215 Desktop takes a while to properly read the disc. When I insert a music CD to play, the music begins right away bit the CD has not "seated" properly and the music "skips". The light on the CPU blinks until the CD is seate
-
Please help, my idvd says there is an internal error when i try and make a movie, it was fine before!!
-
Background java thread stops after running the fx thread
in my server thread i am accepting a file . so i used Platform.runLater() to display a scene that gets confirmation from user. But when it reach the scene it is not going back to the server thread. class server implements Runnable public void run() w
-
Please find below the code when I select gv_zpersnr1on screen I want to fill second field gv_pername1 and display after we select.But it cannot be displayed PROCESS BEFORE OUTPUT. MODULE status_0100. MODULE init_screen_0100. PROCESS AFTER INPUT.