[Z77IA-E53] UEFI Bios Version [E7733IMS.Axx Releases]

E7733IMS.A20 ==> E7733IMS.A31
   01.Update CRB base 024 follow 7751 H74 BIOS
   02.Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown
   03.Patch NV Quadro NVS450 card S3 fail
This is a beta bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!

E7733IMS.A41 ==> E7733IMS.A43 BETA BIOS
VGA BIOS         : 2137
ME Version       : 8.1.40.1416 Updated with this bios.
RAID ROM         : RST_11.5.0.1207
LAN OptionRom    : 2.41
Device OptionRom : N/A
    01. Update Fixbootorder module to support AMI BCP tool.
  Update CRB base follow 7751 HA1 BIOS
  01. Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000019).
      &Update CPU Microcode for Sandy Bridge Q-0 and D-2(M12206A7_00000029).
  02. Add solution to fix System hang up "A2" with some hard disk.
  03. Adjust Fast Boot PS2 Devices Support disable function incorrect solution.
  04. Remove Switch to PLL mode for clock buffer solution.
  05. Patch Fast Boot PS2 Devices Support disable function incorrect.
  06. Update ME 8.1.40.1416.
  07. Modify the PCH Sata Aggressive LPM Support item default value.
  08. Switch to PLL mode for clock buffer.
  09. Fix can't detect LSI 9270-8i RAID card.
  10. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
      but the option has display garbled.
  11. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
  12. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz. 
  13. Fix clear cmos after boot option priorities show error issue.
  14. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
  15. Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
      to patch some NV's graphics card capability issue.
  16. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
  17. Fix some monitor hang B2 issue.
  18. Change French language error in the option "Load Overclocking Profile x".
  19. Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
  20. Update SMBIOS module ver 34.
  21. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
  22. Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown.
  23. Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
  24. Fix post process, the phenomenon of the dialog box will appear
      if you press F12 Key some cases there will be the phenomenon of the crash.
  25. Fix select BIOS Setup Discard Changes and Exit item after can't enter os issue.
  26. Fix F12 Snapshot function error issue when post press F12 and Del key.
  27. Patch NV Quadro NVS450 card S3 fail.
  28. Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
      "Secondary Plane Turbo Power Limit" range to 4096.
  29. Fix it will show error characters in Boot device priority after disable some boot options.
This is a beta bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!
[/quote]

Similar Messages

  • [B87M-E45] UEFI Bios Versions [E7817IMS.Axx Releases]

    E7817IMS.A10 [MP Bios Release]
    VGA BIOS         : 2177
    GOP       : 5.0.1035
    ME Version    : 9.0.20.1447
    RAID ROM    : 12.0.0.1783
    LAN OptionRom    : 2.53 (UEFI v2.021)
    Device OptionRom : N/A
    Release MP Bios
    This is a full release bios. It's use is done solely at your risk! Flash Method
    1.) >>Use the MSI HQ Forum USB flasher<<
         A.) Download the attached archive and place it on your desktop. Do not decompress.
         B.) Download and install the Forum flash tool.
         C.) Insert your FAT32 formatted usb stick.
         D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
         E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
         F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
    2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
    Once the flash is complete, you must download and install the latest ME drivers.

    E7817IMS.A20 ===> E7817IMS.A31 
    VGA BIOS         : 2177
    GOP       : 5.0.1035
    ME Version    : 9.0.21.1462
    RAID ROM    : 12.0.0.1783
    LAN OptionRom    : 2.53 (UEFI v2.021)
    Device OptionRom : N/A
               01. Update code base to 4.6.5.4_VEB_1AQQW032a 
       02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m162
          & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m165
              a. Remove 4 DIMM Memory Presets option when model is 2 DIMM design.
              b. Add more Memory Presets option.
              c. Grayout DRAM Training item when user password installed.
              d. Fix system hang on 0x55 issue when use G.SKILL F3-2800C12Q-32GTXDG(12-14-14-35) memory and XMP is enabled.
              e. Modify DRAM frequency above 2000MHz and tCL is 7 patch solution.
              f. Patch MUSHKIN 991768 memory RST jump error for 7866.
              g. Patch ADATA AD3U1600W4G11-B memory RST jump error.
              h. Patch SWISSBIT MGU02G64E1BA2EP-BBR memory can't boot into OS issue.
              i. Fix system hang on 0xFF problem when system boot with some BCLK setting and issue the warm reset.
              j. Modify some coding syntax avoid compile fail.
            03. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m074
               & GSESetup module to SharkBaySetup_m021
               & MSI GSEII Common Private module to MSI_GSEII_Common_Private_m013
               & MSI GSEII SharkBay Private module to MSI_GSEII_SharkBay_Private_m015
              a. Fix setup item (IEEE1394 and USB30) can be select when user password.
              b. Update to support CRB 4.6.5.4_VEB_1AQQW032.
            04. Update OSSelect module to OSSelect_m020
              a. Base on CRB32 to update SecurityBootFlavor version 22 to file for Windows 8 Configuration item.
            05. Update MSI Multi Language module to MSI_Multi_Language_m008
              a. Add SecureBootMode.uni string for CRB32.
            06. Update uP1811 module to uP1811_m111
              a. Modify VR 12VIN OCP Expander item help string for SharkBay platform.
            07. Patch SATA driver detection issue and add item to control.
            08. Support USB Device resume from S4/S5
            09. Modify some item string for BIOS SPEC V8.16
        10. Fix hardware monitor system fan1 speed.
       11. Modify DMI type 3 manufacturer and version.
       12. Fix CSM bom DMI type 2 product name.
    This is a full release bios. It's use is done solely at your risk! Flash Method
    1.) >>Use the MSI HQ Forum USB flasher<<
         A.) Download the attached archive and place it on your desktop. Do not decompress.
         B.) Download and install the Forum flash tool.
         C.) Insert your FAT32 formatted usb stick.
         D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
         E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
         F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
    2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
    Once the flash is complete, you must download and install the latest ME drivers.

  • [Z87-G43 GAMING] UEFI Bios Versions [E7816IMS.Axx Versions]

    E7816IMS.A30 ===> E7816IMS.A42 
    Latest as of 02/12/2014
    VGA BIOS         : 2179
    GOP       : 5.0.1036
    ME Version    : 9.0.30.1482
    RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
    LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
    Device OptionRom : N/A
    Change Log:
       Update code base form 4.6.5.4_VEB_1AQQW034_m025a
            01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m169
          & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m172
              a.Modify auto adjust VCCIN voltage code for 9 series model.
              b.Modify auto adjust CPU Vdroop Offset Control code.
              c.Modify DRAM Frequency item code to avoid display two DRAM Frequency item problem.
              d.Remove the force one DIMM per channel related code from MRC.
              e.Modify the DRAM Frequency and BCLK setting when XMP speed greater than 3000MHz when use
                non K sku CPU.
              f.Fix BCLK setting not be apply issue when use XMP 3000MHz memory and XMP is enabled and
                boot on clear CMOS state
              g.Fix XMP timing incorrect issue when use XMP 3000MHz memory and BCLK is 102.30MHz and
                DRAM Frequency is 2933MHz.
              h.Fix current CPU Ratio incorrect issue when OC Genie started by OC Genie Button at BIOS
                first boot.
              i.Modify Apacer 4GB PC3-24000 memory patch solution.
              j.Add code to adjust ISL6388 PWM setting when over voltage.
              k.Support DRAM Phase Control item and DRAM Switching Frequency item for 7888.
              l.Correct token to change OC Genie GT voltage setting.
              m.Remove extra % symbol from percentage options.
       02. Update IR3563A module to IR3563A_m112
              a.Add multi language help string.
              b.Remove extra % symbol from percentage options.
       03. Update uP1649 module to uP1649_m109
              a.Add multi language help string.
              b.Remove extra % symbol from percentage options.
            04.Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m081
              a.Fix press BackSpace is not active when edit item.
       05.Update OSSelect module to OSSelect_m023
              a.Win7 device manager shows error message"!"on the 2nd VGA card
           "This device cannot find enough free resources that it can use. (Code 12)"
       06.Update OemInt15 module to OemInt15_m007
       07.Fix s5 auto wake up when enabled 'resume By onbaord lan'
       08.Remove useless SLI test key
       09.Fix UUID DMI imformation reverse   
    Update code base form 4.6.5.4_VEB_1AQQW034_m025
            01. Update code base to 4.6.5.4_VEB_1AQQW034 
            02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m168
          & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m171
              a. Modify the DRAM Frequency and BCLK setting when XMP speed greater than 3000MHz.
              b. Fix system can't boot issue when use Haswell ES2 B0 stepping CPU.
              c. Add OC Genie DRAM Voltage related code for use NCT3933 model.
              d. Add token to change OC Genie GT voltage setting.
              e. Fix OC Genie power limit setting incorrect issue after reboot system.   
              f. Add code to turn off OC Genie Button LED when disable OC Genie by BIOS OC Genie item.
              g. Display VT-D item in CPU Features group when chipset supported.
              h. Update private file to SharkBay Codebase 031 Intel RC 1.7.0.
            03. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m080
               & MGSE - ClickBIOSUI module to ClickBIOSUI_m018
              a. Fix HotKey F8/F9 support load/save profile from romhole.
              b. Add load profile when clear cmos or OC fail.
              c. Fix "Full Screen Logo Display" item can't be changed when clear CMOS.
            04. Update Aptio NCB/ROM Hole module to Aptio NCB ROM Hole_m128
              a. Fix HotKey F8/F9 support load/save profile from romhole.
              b. Support load profile when clear cmos or OC fail.
            05. Update GBI module to GBI_m021
              a. skip onboard VIA HUB 0x2109
            06. Update PostMsg Module to PostMsg_m106
         a. Support load profile when clear cmos or OC fail.
            07. Update HardwareMonitor module to HardwareMonitor_m030
              a. modularize Hardware SD file and uni
            08. Update uP1649 module to uP1649_m108
              a. Patch minimum load issue when resume from S3 (only for 7887).
            09. Update FITC module to FITC_ME9_1.5M_1482_m013
              a. Update ME to v9.0.30.1482
            10. Update Powerloss module to Powerloss_m108
              a. Update string for Russian.
            11. Update MSI_TCG module to 4.6.4.0_TCG_42_m007
               a. Update to new nersion TCG_42.
            12. Update VBIOS 2179 & GOP Driver 5.0.1036
            13. Fix RocketRaid 2310 and RocketRaid 620 raid card,the Legacy mode install OS fail.
            14. Patch muti-bom "DMI Information" error.
            15. Fix the OC_switch LED will be power on under S5 state.
                (when HW OC_GENIE button is enable and OC Genie Function Control is set to "By BIOS Options".)
            16. Add VGA GOP information for AP
            17. Update NCT3933 module NCT3933_m104
               a. Support DRAM PCH VREF PLX voltage item code for intel 9 series chipset model CrescentBay platform.
            18. Fix DMI type0 16M SPI ROM "BIOS ROM Size" show 8192KB
    This is a BETA bios. It's use is done solely at your risk!
    Flash Method:
    1.) >>Use the MSI HQ Forum USB flasher<<
         A.) Download the attached archive and place it on your desktop. Do not decompress.
         B.) Download and install the Forum flash tool.
         C.) Insert your FAT32 formatted usb stick.
         D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
         E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
         F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
    2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
    Once the flash is complete, you must download and install the latest ME drivers.
    http://www.msi.com/product/mb/Z87-G43-GAMING.html#download

    E7816IMS.A40 ===> E7816IMS.A51   
    VGA BIOS         : 2179
    GOP       : 5.0.1036
    ME Version    : 9.0.30.1482
    RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
    LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
    Change Log:
             01. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
                02. Fix Intel (R) Rapid Start Technology function fail.
                03. DMI Link ASPM default to disable.
                04. Add TseDefaultBootOrder module 4.6.4.1_DefBootOrder_1.3
                a. Fix FixedBootOrder change boot option priorities issue.
                05. Fix WHQL test PC Resume fail.
                06. Fix some DMI string writeonce issue.
                07. Change solution about associate item SATA Hot-Plug and External Sata.
                08. Fix Serial(COM) Port1 Settings error.
                09. Update MsiOc - SharkBay module to MsiOc_SharkBay_m175
                        & Update MsiOc SharkBay Private Module m177
                a. Patch XTU can't set BCLK ratio issue.
                b. Fix DRAM Timing setting not be apply issue when install two memory on channel B and set
                timing save exit then change one memory to channel A.
                c. Add new token to control OC page spec.
                d. Modify EIST item and Turbo Mode item related code in OC page.
                e. Move Core Ratio Limit item to OC main Page and modify related code.
                f. Add CPU Ratio Apply Mode item and related code.
                g. Modify OC Genie Gear 2 setting for 9 series model and modify OC Genie enabled message.
                h. Support multi step option select mode for Memory Try It ! function.
                i. Move some function struct define and table define to new file.
                j. Fix Haswell Refresh CPU GT ratio can't set back to default issue when set GT ratio
                above default GT ratio and then enter setup change ratio to Auto.
                10. Remove XHCI USB Mapping patch code.
                11. Fix can't boot to OS after enter boot menu without choose any option.
    This is a BETA bios. It's use is done solely at your risk!
    Flash Method:
    1.) >>Use the MSI HQ Forum USB flasher<<
         A.) Download the attached archive and place it on your desktop. Do not decompress.
         B.) Download and install the Forum flash tool.
         C.) Insert your FAT32 formatted usb stick.
         D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
         E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
         F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
    2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
    Once the flash is complete, you must download and install the latest ME drivers.
    http://www.msi.com/product/mb/Z87-G43-GAMING.html#download

  • [P67A-GD80 (B3)] BETA UEFI Versions [ E7672IMS.Axx releases]

    hey every one
    so msi sent me a p67a-gd80 to review
    problem is i installed 4gb of ram from 2gb the mobo had a fit oc recoverd then gave me the flashing bois 1 faild led so i auto recoverd it with the 2nd bios it works again but now i cant save any settings in the bois as soon as save is clicked it locks up
    i cant find the bios on the web site and was hoping some one had a copy so i can finish the review and get it posted up
    thanks carl...

    Changelog synopsis:
    E7672IMS.A40 ---> E7672IMS.A52
    - Support Linear auto mode & modify CPUSmartFAN and SystemSmartFAN.
    - Remove system FAN control item.
    - Set CpuMinFanSpeed as 12.5%
    - Modify CPU current limit value to fix CPU ratio drop issue when adjust CPU ratio to 50 and run CPU loading test.
    E7672IMS.A52 ---> E7672IMS.A53
    - Modify MRC check SPD address mapping code to avoid memory write leveling training fail.
    - Force memory address mapping to mirrored to fix system hang on 2Eh issue when use ELPIDA 1G1333D1093 memory.
    - Fix the system will hang 19 issue when adjust CPU voltage and then restart system under Windows.
    - Support XMP 1.3 memory.
    E7672IMS.A53 ---> [E7672IMS.A54] ---> E7672IMS.A50
    - Fixed System RomID would change and failed to  update bios.
    Latest BETA Release: E7672IMS.A62  
    E7672IMS.A50 ---> E7672IMS.A62
    - Fix use Mflash to update with empty flash drive system will hang.
    - Fix the issue that when use MFlah update or boot it will show some error.
    - Implement M-FLASH solution for NTFS file support. (Now only support update BIOS Function.Support Read-only. No writes to media of any kind are supported. Compressed, Encrypted, and Sparce files are not supported).
    - Fixed the pcb version
    - Update USB Module to 4.6.3_USB_08.10.16 to fix the issue that Microsoft
    - Fixed Mflash boot and Recovery support USB 3.0 port.
    - Try to fix WHQL S3 resume time too long.
    - Combining the CPUSmartFAN and SystemSmartFAN function, and the system fan can support Auto/Manual mode by user option.
    Please note that flashing this release occurs entirely at your own risk!
    >>Use the MSI HQ Forum USB flasher<<, Method II for best results.
    Do not use the BIOS/UEFI integrated M-Flash Routine.
    Unfortunately, I do not have the actual BIOS File yet, so I can't upload it.  I will attach it as soon as I have it.

  • KT3 Ultra (2) Bios version 5.7 released

    MSI has now released bios version 5.7 for the KT3 Ultra (ARU) and KT3 Ultra2. Fixes posted are:-
    Support AMD Barton XP3000+ (FSB333) CPU (For KT3 Ultra2 only)
    Add CPU Halt Command Detection in the Bios Setup
    Fixed ATI 8500 AGP Card cannot be used
    The new bios can be downloaded here:-
    KT3 Ultra (ARU)
    Link
    KT3 Ultra2
    Link

    Juras. This thread may help answer your question Link  

  • KT6V series bios version 2.0 released

    MSI has posted bios version 2.0 for the KT6V series (not KT6-V) and can be downloaded here.
    Update description:-
    -Support Barton CPU 3000+ & 3200+
    -Support Sempron CPU 3000+
    -Update VIA RAID BIOS to ver. 4.31

    Thanks for your advise. Many people will make use of it.  

  • [Z77A-GD65] BETA UEFI Version [E7751IMS.Axx Releases]

    E7751IMS.A71 ==> E7751IMS.A72
       Changes not known yet.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

    E7751IMS.AA1 Latest Full release ==> E7751IMS.AA4 (BETA BIOS)
    Me Firmware: 8.1.40.1416
    VGA Bios: 2137
    Raid Rom: 11.5.0.1207
    Lan OptionRom: 1.3.81
    01. Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
           "Secondary Plane Turbo Power Limit" range to 4096.
       02. Fix it will show error characters in Boot device priority after disable some boot options.
       03. Fix UEFI OS 80 port can't show CPU temp issue.
       04. Fix clear cmos after boot option priorities show error issue.
       05. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
       06. Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
            to patch some NV's graphics card capability issue.
       07. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
       08. Fix some monitor hang B2 issue.
       09. Change French language error in the option "Load Overclocking Profile x".
       10. Update SMBIOS module ver 34.
       11. Remove Switch to PLL mode for clock buffer solution.
       12. Patch Fast Boot PS2 Devices Support disable function incorrect.
       13. Update ME 8.1.40.1416.
       14. Modify the PCH Sata Aggressive LPM Support item default value.
    01. Switch to PLL mode for clock buffer.
       02. Fix can't detect LSI 9270-8i RAID card.
       03. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
           but the option has display garbled.   
       04. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
       05. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
               06. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
    This is a beta bios release for this board with additional archive for flashing the ME extension.
    >>Use the MSI HQ Forum USB flasher<<
    Download the compressed archive to your desktop but do not decompress.
    Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
    Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
    <<<Z77A-GD65 Drivers>>>
    Please note that flashing this release occurs entirely at your own risk!
    [/quote]

  • [B75MA-P45] UEFI Bio Version [E7798IMS.1xx]

    E7798IMS.160 ===> E7798IMS.176 Beta Bios
    VGA BIOS        : 2137
    GOP      : 3.0.14.1015
    ME Version      : 8.1.40.1416
    LAN OptionRom   : 2.41/1.24 UEFI:2.008
    01. Switch to PLL mode for clock buffer.
       02. Fix can't detect LSI 9270-8i RAID card.
       03. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
           but the option has display garbled.   
       04. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
            05. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz. 
       06. Remove Switch to PLL mode for clock buffer solution.
       07. Patch Fast Boot PS2 Devices Support disable function incorrect.
       08. Update ME 8.1.40.1416.
       09. Modify the PCH Sata Aggressive LPM Support item default value.
       10. Adjust Fast Boot PS2 Devices Support disable function incorrect solution.
       11. Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000019).
           &Update CPU Microcode for Sandy Bridge Q-0 and D-2(M12206A7_00000029).
       12. Add solution to fix System hang up "A2" with some hard disk.
       13. Update Fixbootorder module to support AMI BCP tool.
    01. Modify the CSM erp market name to be CSM-B75MA-P45.
    01. Modify the PCH SATA Aggressive LPM Support item default value.
       02. Add CSM erp.
    01. Add "Long Duration Power Limit","Short uration Power Limit","Primary Plane Turbo Power Limit", "Secondary Plane Turbo Power Limit" range to 4096.
       02. Fix UEFI OS 80 port can't show CPU temp issue.
       03. Fix clear cmos after boot option priorities show error issue.
       04. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
       05. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
       06. Update SMBIOS module ver 34.
       07. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
    01.Disable"Secure Boot"when "Windows 8 feature"set from"Enabled"to"Disabled"
         to patch some NV¡¯s graphics card capability issue.
       02.Fix it will show error characters in Boot device priority after disable
         some boot options.
       03.Fix some monitor hang B2 issue.
       04.Limit Snapshot to be triggled just one time while system with multiple USB
          keyboards pluged.
       05.Change French language error in the option Load Overclocking Profile X
    01.Fixed build-in shell disappear issue when update FixedBootOrder13 module.
       02.Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
       03.Update new solution for fix select BIOS Setup Discard Changes and Exit
          item after can't enter os issue
       04.Fix connect some usb device will can't enter os.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

    As it supports M-FLASH you will (according to MSI) be able to use a USB drive as a BIOS chip and boot the computer,
    This info is taken straight from your motherboards page at msi.com
    M-Flash
    Compared to common motherboard which need extra BIOS chips, MSI’s M-Flash has a double advantage which doesn’t need extra components and secondly, all your BIOS data will be saved in the USB drive. The stored data does not only have backup and upgrade function, moreover it can also be seen as a portable BIOS chip which is actually able to boot up your PC.
    Features
    - Backup/Restore Your BIOS to/from Any USB Flash Disk
    - Avoid Unnecessary Repair Due to Accident Failures During The Upgrading Process
    - Earn more BIOS Lifespan by Reducing Unnecessary Rewriting Process

  • [Z77MA-G45] Bios Versions [E7759IMS.1xx Releases]

    E7759IMS.180 ==> E7769IMS.190Official
       Add som spi rom support.
       Fix quit without saving will reset when connect a uefi os.
       Fix VGA N650-1GB5(V280-05S & V280-10S) hang issue.
       Replace SATA port automatically shutdown when in WIN8 64 bit OS the shutdown.
       Add UpdateBiosAndME function error message issue.
       Update FixedBootOrder13 module.
       Fix the FixedBootOrder function error issue.
       Add solution to support OA30tool changing OEMID & OEMTBLID.
       Fix NTFS HDD with the customized OS,the system will hang A3.
       Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000017).
       Fix set virtu technology to D-mode && OC CPU Ratio will cause 3 times full reset.
       Update UpdateBiosAndME function error message solution.
       Fix can't adjust boot device priority by Int15 tool when update Fixed Boot Order ver:013.
       Update ME 8.1.30.1350.
       Fix transparnt string background function which applied in progress bar.
       Adjust the UpdateBiosAndME function error message string.
       Patch Fast Boot "SATA Device Support" disable function fail.
       Update CRB024.
       Fix post process, the phenomenon of the dialog box will appear
                if you press F12 Key some cases there will be the phenomenon of the crash.
       Patch NV Quadro NVS450 card S3 fail.
       Fix Samsung Non-XMP memory can't OC more than 1866 with IVB CPU.
       Fixed setup item is disappear issue when restore defaults for MahoBay
               platform (Update FixedBootOrder 13).
       Fix F12 Snapshot function error issue when post press F12 and Del key.
       Fix GSE II setup menu three mode function error issue when load default
               under mainpage group.
    This is the full release bios for this board with additional archive for flashing the ME extension.
    >>Use the MSI HQ Forum USB flasher<<
    Download the compressed archive to your desktop but do not decompress.
    Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
    Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
    >>MSI Downloads<<
    Please note that flashing this release occurs entirely at your own risk!

    E7759IMS.1A0 ==> E7759IMS.1B1Official
       01.Fix MFlash failed issue when connecting 4 SATA HDD.
       02.Fix 3.3VSB power lost issue(G3-S0).
       03.Fix the issue that the system will hang 0xB4 or 0x99 when use customer usb cable
               or usb cardreaders.(USB cardreader: KAMA reader Tr, Akasa card reader)
       04.Update ME8.1.50.1456.
            05.Update audio table
       06.Patch system can't boot issue when use CMY8GX3M2A2133C11R & CMZ8GX3M2A2133C11R and memory frequency >=1866.
            07.Change win8 logo
            08.Update GOP solution
            09.Add RestoreSpecialBootOptions module.
       10.Fix when plug 2 different dram,can't adjust Dram ratio, CPU IO Volt & Sa Volt.
       11.Patch system can't boot issue when use CMY8GX3M2A2133C11 & CMZ8GX3M2A2133C11
               & CMZ8GX3M2A2133C11B and memory frequency >=1866.
    This is the full release bios for this board with additional archive for flashing the ME extension.
    >>Use the MSI HQ Forum USB flasher<<
    Download the compressed archive to your desktop but do not decompress.
    Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
    Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
    >>MSI Downloads<<
    Please note that flashing this release occurs entirely at your own risk!

  • Update for bios version 52kt30AUS - Lenovo Ideacentre K-210

    Is there an update for this bios.

    jbegnaud0163 wrote:
    link is no longer valid
    Try this link.......
    https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/idea...
    ***  The message thread you replied to is an old discussion.  My link to the BIOS update is for a newer BIOS version that was released after this discussion started.
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • [Z68MA-ED55 (B3)] BETA UEFI Version [E7676IMS.Axx/Bxx Releases]

    E7676IMS.A70 ==> E7676IMS.A87
    1. Fix USB3.0 M-Flash Fail Issue.
    2. Fixed S3/S4/S5 resume will hang FF issue  when  set Power management to power saver mode.
    3. Fixed the pcie gen2 speed change to pcie gen1 issue  when the S3 resume after.
    4. Fixed Power Technology Function.
    5. Fixed the post show clear cmos information issue when under the S3 mode and turn off the Power.
    6. Fix plug a PCIEx1 network card to all the PCIEx1 slots on the motherboard and no video occur.
    7. Fix S4 resume issue.
    8. Modify the string 'Disable' to 'Disabled' in item 'Power Technology'.
    9. Fix hang at B2 with Intel Ethernet adapter card (I350-T2) on PCIE 1 or 4.
    10. Update Lucid Virtu license key.   
    11. Set PCI ROM Priority default to Legacy ROM.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<<
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

    B.xx Series[Supports Ivy Bridge]:
    E7676IMS.B00==> E7676IMS.B15
    You can re-flash to this version with regardless what's your current BIOS version installed A.xx or B.xx, just follow the exact described flashing instructions below
    01.Fix vdroop offset control function can't work normally issue and modify code to avoid chip bug issue.
    02.Add Gigadevice 25Q64BSIG" SPI ROM support.
    03.Fix Adjusted DRAM Frequency and XMP info incorrect issue when use XMP 3000 memory and if XMP 3000 profile is enabled then force run 2800.
    04.Fix Adjusted DRAM Frequency incorrect issue when XMP is enabled and set different DRAM frequency.
    05.Fix DRAM frequency incorrect issue when use Patriot PV316G213C1K memory and XMP is enabled.
    06.Fix system hang on 0x55 issue when use Team Team-Elite-1866 memory.
    07.Fix system hang on 0x55 issue when use SPD 800MHz memory and Sandy Bridge CPU.
    08.Remove pop box of 'cpu ratio'item.
    01.support amp function.
    02.Finetune G.Skill memory command rate timing.
    03.Fix some memory cause bios hang 0x3b or 0x4f when overclock cpu ratio to 42.
    04.Fix the issue that setting item "Command Rate" to 1t causes an unnecessary cold reset when bios was postting.
    05.Fix some PCIE card can¡¯t detect issue.
    06.Fixed MSI keyboard ES300MU can't detect.
    07.Set SMLink1 Thermal Reporting Select default to ture.
    08.Fix use usb card reader error issue when update usb 022 module.
    09.Fix OC Genie setting not set to item after OC Genie function enable.
    10.Fix sometimes system will hang up in the shutdown process after idle it for some time.
    11.Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
    12.Improve memory performance.
    13.Add M-Flash support ME FW update solution.
    14.Modify ME shouldn¡¦t be updated if the USB is removed before reboot to BIOS.
    01. Modify USB3.0 HW SMI PIN.
    02. Update Lucid Virtu license key.
    03. Fix DDR_VREF_CA_A/B and DDR_VREF_DA_A/B value keyin error issue.
    04. Modify GPU Voltage help string.
    05. Fix core Ratio Limit can not load default in BIOS setup menue after "Click BIOS2" change  core Ratio Limit  value.
    06. Fix system reset after enable item"Adjust CPU Ratio in OS" and then press F11 to get boot menu.
    07. Fix sometimes tpm item lost in setup.
    08. Fix the "Event Kernel-Power 137" error event log shows while resumed from HS3/S3 with Core i5-3470 and Core i5-3570 on Win8 systems.
    09. Fix it can not adjust CPU core voltage issue.
    10. Fix TPM item enabled issue when load default after.
    01.USB KB Can't Use at Post  when Connect up PS2 MS and usb kb On the mainboard.
    02.Fixed using Startech PCI Adapter card will result to no POST.
    03.Update VBIOS to 2137.
    04.Fixed using creative pci audio card(SB0310) will hang 0x72h.
    05.Fix XMP auto enable when use IVB CPU and dram ratio is auto.
    06.Fixed fast boot caused s3 reset when press ¡°F2¡± after  cpu memory change and OC retry fail.
    07.Fix use PS2/USB Keyboard combination key(Shift+.. /Alt+.../Ctrl+.... ) Can't to Set name at BIOS Setup.
    08.Add the EFI OS BootOptionNames module.
    09.Fixed PLL function caused full reset after a warm reset when dram ratio >2000.
    10. If plug 2 different XMP dram, auto gray XMP item.
    11. fix BCLK OC fail caused always reset issue.
    12. Fix adjuest cpu raito function error issue ( for some special chips, such as h77... ).
    13. MRC Fast item show only when use user password.
    14. Fix show oc fail message when set CPU Base Frequency to some frequencies like 10001*10khz...
    15. Improve system stability when use ADATA AX3U2133XC4G10-2X memory and XMP is enabled.
    16. Fix VGA dirver always stop working when use IvyBridge CPU.
    17. Update CRB base 021
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

  • [ZH77A-G43] BETA UEFI Version [E7758IMS.1xx Releases]

    E7758IMS.160 FULL RELEASE BIOS
    - Support Windows8 Feature.
    - Update CPU Micro Code.
    - Update ME8.1 1318 firmware.
    - Update onboard Realtek UEFI driver.
    - Improved gaming keyboard compatibility.
    - Auto select UEFI/Legacy mode by VBIOS & system BIOS.
    This is the full release bios for this board with additional archive for flashing the ME extension.
    >>Use the MSI HQ Forum USB flasher<<
    Download the compressed archive to your desktop but do not decompress.
    Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
    Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
    <<Intel Downloads / Management Engine>>
    Please note that flashing this release occurs entirely at your own risk!

    E7758IMS.160 ==> E7758IMS.183
    01.Fix whql test fail after support 18 languages.
    01.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory.
    02.Modify watchdog timer function code.
    03.Fix PCIE GEN3 display card issue.
    04.Fix 'Integrated Graphics Share Memory' and 'DVMT Memory' item show incorrect.
    05.update realtek uefi pxe rom.
    06.Fix NV's GOP crad will lag & freeze in setup when win8 Enable.
    07.Fix press DEL key can't entry BIOS Setup when fast boot enabled after.
    08.Modify fast boot default to disabled when win8 disabled.
    09.Fix USB Support and Fast Boot item help string show error issue.
    10.Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
    11.Fix SATA Devices Support function error issue.
    12.Fix ps2 keyboard can't use in os when msi fast boot enabled.
    01.Fix USB3.0 can not work when OC genie enabled.
    02.Fix oc profile fail.
    01.Add EIP99882 to fix Win8 OS will hang 0D when set usb support to Partial Initial after reset.
    02.Modify OC Genie Mode help string.   
    01.Fix USB mouse cannot be use under UEFI bios setup issue if you plug the mouse after booting up the system.
    02.Add GOP hot-plug solution.
    03.Fix the issue that hot plug usb device will clear screeen when cpu memory changed OR oc fail message appear.
    04.Fix post process, the phenomenon of the dialog box will appear if you press F12 Key some cases there will be the phenomenon of the crash.
    05.Modify PS/2 Mouse&KB wakeup help string.
    06.Fix WIN7 64 Bit OS S4 resume fail issue when BIOS Setup install password and password check set boot mode.
    01.Remove F1,F2 information after clear CMOS.
    01.Fix system will reset after clear cmos and press F1.
    02.Add F1,F2 information after clear CMOS.
    01.Fix F12 issue for two ps2 port bom.
    02.Modify BIOS Setup USB Support item.
    03.Modify DMI type1 and DMI type 2 Manufacture from write once to unlimited.
    01.Add UpdateBiosAndME function error message issue.
    02.Add some spi rom support.
    03.Fix quit without saving will reset when connect a uefi os.
    04.Patch Fast Boot "SATA Device Support" disabled function fail.
    05.Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown.
    06.Update the solution of "Fix USB3.0 cannot work when OC genie enabled".
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

  • [Z77 MPOWER] BETA UEFI Version [E7751IMS.Hxx Releases]

    E7751IMS.H45 ==> E7751IMS.H47
    01.Fix issue:Wakeup from S4 failed under Windows7 UEFI mode if you set Administrator password and set the Password check to ¡°BOOT¡±.
    01. Fixed "Output Select"item can not working correct.
    02. Remove "Press <DEL> or <F2> to enter setup." from post.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

    E7751IMS.H62 ==> E7751IMS.H64
    01. Fix WIN7 64 Bit OS S4 resume fail issue when BIOS Setup install password and password check set boot mode.
    02. Add "Hardware Prefetcher" item and "Adjacent Cache Line Prefetch" item in CPU Features group.
    03. Add the usb setup item and usbpolicyprotocol to enable or disable the usb mass storage driver.
    04. Fix USB mouse cannot be use under UEFI bios setup issue if you plug the mouse after booting up the system.
    05. Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
    06. Modify BIOS Setup USB Support item.
    07. Add VGA hot-plug solution.
    01. Fix the issue that hot plug usb device will clear screeen when cpu memory changed OR oc fail message appear.
    02. Fix 'OC Retry Count' Function issue for BCLK OC.
    03. Fix VGA N650-1GB5(V280-05S & V280-10S) hang issue.
    04. Patch Fast Boot "SATA Device Support" disable function fail.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

  • [H61M-P20/ S20 (G3) Beta UEFI Bios [E7788IMS.1xx Releases]

    E7788IMS.190 ==> E7788IMS.1A1 Beta UEFI Bios
    Add UpdateBiosAndME function error message issue.
    Set ME Setting "M3 Power Rails Availability" as false.
    Fixed Avexir 2400(patched before) S3 wakeup failed.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

    E7788IMS.190 ==> E7788IMS.1A1 Beta UEFI Bios
    Add UpdateBiosAndME function error message issue.
    Set ME Setting "M3 Power Rails Availability" as false.
    Fixed Avexir 2400(patched before) S3 wakeup failed.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

  • K7N2 Delta bios versions 5.4 & 7.4 released

    MSI has now released bios version 5.4 for the K7N2 Delta-L and 7.4 for the K7N2 Delta-ILSR and can be downloaded here:- Link
    This bios fixes the following problems of the previous version:-
    -Fixed Nvidia FX5900 Ultra compatability issue.

    I was using my K7N2 Delta nicely but after flashing the BIOS from 5.0 to 5.3 in LiveUpdate3 (all OK) and then when LiveUpdate ask to reboot... GOOD BYE!
    When bootin the D-lights show that I have a processor damaged or not intalled properly (two red light up, and two green down...).
    My processor is an Old Tbird 1.2 Ghz with 100FSB.
    The question is: Why the mother stops recognicing the processor if before flashing BIOS worked nicely?.
    J10 and J11 jumpers:
    When I opened case to check out, I had the green J10 and J11 jumpers closed in the mother. The J10 was in safe mode, and the J11 jumper was closed...(133FSB-166FSB??).
    I only have another athlon 1.1 ghz FSB100 processor to test the mobo, but I don´t want to take the risk of burn that one two (if is that the problem, of course).
    So... I want to know how can I reflash the bios back (I have the old BIOS in a backup floppy disk, of course)... or if anyone else have the same problem as me....
    Thanx a lot guys, and please help me... I´m very sad by now... because I don´t know how to get my computer to work.
    Jose.
    (from Argentina)

Maybe you are looking for