[Z77MA-G45] Bios Versions [E7759IMS.1xx Releases]
E7759IMS.180 ==> E7769IMS.190Official
Add som spi rom support.
Fix quit without saving will reset when connect a uefi os.
Fix VGA N650-1GB5(V280-05S & V280-10S) hang issue.
Replace SATA port automatically shutdown when in WIN8 64 bit OS the shutdown.
Add UpdateBiosAndME function error message issue.
Update FixedBootOrder13 module.
Fix the FixedBootOrder function error issue.
Add solution to support OA30tool changing OEMID & OEMTBLID.
Fix NTFS HDD with the customized OS,the system will hang A3.
Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000017).
Fix set virtu technology to D-mode && OC CPU Ratio will cause 3 times full reset.
Update UpdateBiosAndME function error message solution.
Fix can't adjust boot device priority by Int15 tool when update Fixed Boot Order ver:013.
Update ME 8.1.30.1350.
Fix transparnt string background function which applied in progress bar.
Adjust the UpdateBiosAndME function error message string.
Patch Fast Boot "SATA Device Support" disable function fail.
Update CRB024.
Fix post process, the phenomenon of the dialog box will appear
if you press F12 Key some cases there will be the phenomenon of the crash.
Patch NV Quadro NVS450 card S3 fail.
Fix Samsung Non-XMP memory can't OC more than 1866 with IVB CPU.
Fixed setup item is disappear issue when restore defaults for MahoBay
platform (Update FixedBootOrder 13).
Fix F12 Snapshot function error issue when post press F12 and Del key.
Fix GSE II setup menu three mode function error issue when load default
under mainpage group.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
>>MSI Downloads<<
Please note that flashing this release occurs entirely at your own risk!
E7759IMS.1A0 ==> E7759IMS.1B1Official
01.Fix MFlash failed issue when connecting 4 SATA HDD.
02.Fix 3.3VSB power lost issue(G3-S0).
03.Fix the issue that the system will hang 0xB4 or 0x99 when use customer usb cable
or usb cardreaders.(USB cardreader: KAMA reader Tr, Akasa card reader)
04.Update ME8.1.50.1456.
05.Update audio table
06.Patch system can't boot issue when use CMY8GX3M2A2133C11R & CMZ8GX3M2A2133C11R and memory frequency >=1866.
07.Change win8 logo
08.Update GOP solution
09.Add RestoreSpecialBootOptions module.
10.Fix when plug 2 different dram,can't adjust Dram ratio, CPU IO Volt & Sa Volt.
11.Patch system can't boot issue when use CMY8GX3M2A2133C11 & CMZ8GX3M2A2133C11
& CMZ8GX3M2A2133C11B and memory frequency >=1866.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
>>MSI Downloads<<
Please note that flashing this release occurs entirely at your own risk!
Similar Messages
-
I tried to update my bios to 7759v16 using the MSIHQ Tool 1.19R9 and failed with a message about the bios being in write only mode. I was able to enter the old bios and tried to enable write mode but could not find such a setting - I was stymied by the many options in the EFI format and may have missed it. Then I realized that I might need a newer version of the MSIHQ Tool and subsequently found and setup version 1.24h on a usb flash drive.
But now my problem is that I cannot get into the bios or boot the flash drive at all. What I have done many times is - disconnect the power, remove the battery, short the JBAT1 jumper and wait several minutes. After this procedure is reversed the board then boots to a simple screen (see attachment) that lists the Motherboard bios version , amount and type of memory, processor type and detected drives. It is interesting that the mouse or MSIHQ usb flash drive is not listed even though the led on the drive is lit.
This screen says that the bios has been set to its default values. Hitting either F1 or F2 as instructed will trigger a reset and send the power supply and motherboard into a continuous "power-up for a moment-then shut off cycle" with nothing displayed on the monitor. This cycling will continue indefinitely.
I'm not sure what else to do. Any ideas?
set up on piece of plywood
Board: MSI Z77MA-G45
Bios: Version 1.4
VGA: ASUS 5570
PSU: Corsair CX430
Intel Core i7-3770K 3.5GHz LGA 1155 77W
MEM: Geil Evo Corsa 16GB 1333
HDD: none
COOLER: Coolermaster Gemini II
OC: none
PS2 Keyboard, USB mouse
OS: none>>Clear CMOS Guide<< with power cord removed,
then leave one 1 memory stick only in 1st DIMM close to CPU socket.
then turn it on and go bios setup and load bios defaults -
Z87-G45 BIOS version 1.4 - Enhanced Turbo not working
Hi,
I have a MSI Z87-G45 Gaming that I have been putting through its paces for the past few weeks, paired with an Intel Core i7-4771 (3.5GHz, 3.9GHz single core turbo, 3.7GHz all-core turbo). It's been great so far, but I have a puzzle on my hands that I have not been able to explain.
Yesterday, happy with the results of various tests I had been running, I started on my final build. Before OS installation, I checked around to see if any new driver or firmware packages had been released since I had last downloaded them a few weeks ago. There was a new BIOS release - version 1.4 - which I grabbed and flashed. I did not pull the BIOS battery afterwards, but I did load the BIOS defaults before configuring things.
Everything appeared to be fine, but today I noticed that the "Enhanced Turbo" option in the BIOS does not appear to be working correctly. Under BIOS version 1.3, CoreTemp, RealTemp and CPU-Z all reported a multiplier of 39x with all cores fully loaded. With BIOS version 1.4, the processor hits 39x with a single-threaded task but drops to 37x with all cores loaded - I.e. it is behaving according to its standard Turbo profile.
I'm not interested in overclocking this system which is why I didn't buy a K-series processor in the first place - everything on the BIOS OC tab is default/auto except for the DRAM which is using a XMP profile - but the extra 200MHz per core is rather neat and something I would like to have.
Is anyone else using BIOS version 1.4 experiencing similar issues? If not, any thoughts on where the issue might lie would be most welcome.
MSI Z87-G45 Gaming - EIST enabled, Intel Turbo Boost enabled, Enhanced Turbo enabled
Intel Core i7-4771
Kingston Genesis 8GB DDR3-1600 (KHX16C9/8) (x4 for 32GB total)
Windows 7 Professional 64-bitI've finally cracked it, so I thought I would add my findings to this thread in case anyone else runs into the same issue.
Under BIOS version 1.3, simply enabling Enhanced Turbo was apparently all that was needed to permit all cores to run with the highest multiplier.
Under BIOS version 1.4, this no longer appears to be the case. Although this setting lifts the multi-core Turbo Boost restrictions, Intel's default profile is still applied, in my case limiting the CPU to a multiplier of 37x with all cores fully loaded.
In addition to enabling Enhanced Turbo, the ratio limits under OC > CPU Features must be manually specified. With BIOS version 1.3, I had left these on their Auto setting and the highest multiplier had automatically been used. With 1.4, I had to manually select the highest multiplier to override the default Turbo Boost profile and get the desired result. -
KT3 Ultra (2) Bios version 5.7 released
MSI has now released bios version 5.7 for the KT3 Ultra (ARU) and KT3 Ultra2. Fixes posted are:-
Support AMD Barton XP3000+ (FSB333) CPU (For KT3 Ultra2 only)
Add CPU Halt Command Detection in the Bios Setup
Fixed ATI 8500 AGP Card cannot be used
The new bios can be downloaded here:-
KT3 Ultra (ARU)
Link
KT3 Ultra2
LinkJuras. This thread may help answer your question Link
-
KT6V series bios version 2.0 released
MSI has posted bios version 2.0 for the KT6V series (not KT6-V) and can be downloaded here.
Update description:-
-Support Barton CPU 3000+ & 3200+
-Support Sempron CPU 3000+
-Update VIA RAID BIOS to ver. 4.31Thanks for your advise. Many people will make use of it.
-
[B75MA-P45] UEFI Bio Version [E7798IMS.1xx]
E7798IMS.160 ===> E7798IMS.176 Beta Bios
VGA BIOS : 2137
GOP : 3.0.14.1015
ME Version : 8.1.40.1416
LAN OptionRom : 2.41/1.24 UEFI:2.008
01. Switch to PLL mode for clock buffer.
02. Fix can't detect LSI 9270-8i RAID card.
03. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
but the option has display garbled.
04. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
05. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
06. Remove Switch to PLL mode for clock buffer solution.
07. Patch Fast Boot PS2 Devices Support disable function incorrect.
08. Update ME 8.1.40.1416.
09. Modify the PCH Sata Aggressive LPM Support item default value.
10. Adjust Fast Boot PS2 Devices Support disable function incorrect solution.
11. Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000019).
&Update CPU Microcode for Sandy Bridge Q-0 and D-2(M12206A7_00000029).
12. Add solution to fix System hang up "A2" with some hard disk.
13. Update Fixbootorder module to support AMI BCP tool.
01. Modify the CSM erp market name to be CSM-B75MA-P45.
01. Modify the PCH SATA Aggressive LPM Support item default value.
02. Add CSM erp.
01. Add "Long Duration Power Limit","Short uration Power Limit","Primary Plane Turbo Power Limit", "Secondary Plane Turbo Power Limit" range to 4096.
02. Fix UEFI OS 80 port can't show CPU temp issue.
03. Fix clear cmos after boot option priorities show error issue.
04. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
05. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
06. Update SMBIOS module ver 34.
07. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
01.Disable"Secure Boot"when "Windows 8 feature"set from"Enabled"to"Disabled"
to patch some NV¡¯s graphics card capability issue.
02.Fix it will show error characters in Boot device priority after disable
some boot options.
03.Fix some monitor hang B2 issue.
04.Limit Snapshot to be triggled just one time while system with multiple USB
keyboards pluged.
05.Change French language error in the option Load Overclocking Profile X
01.Fixed build-in shell disappear issue when update FixedBootOrder13 module.
02.Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
03.Update new solution for fix select BIOS Setup Discard Changes and Exit
item after can't enter os issue
04.Fix connect some usb device will can't enter os.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.As it supports M-FLASH you will (according to MSI) be able to use a USB drive as a BIOS chip and boot the computer,
This info is taken straight from your motherboards page at msi.com
M-Flash
Compared to common motherboard which need extra BIOS chips, MSI’s M-Flash has a double advantage which doesn’t need extra components and secondly, all your BIOS data will be saved in the USB drive. The stored data does not only have backup and upgrade function, moreover it can also be seen as a portable BIOS chip which is actually able to boot up your PC.
Features
- Backup/Restore Your BIOS to/from Any USB Flash Disk
- Avoid Unnecessary Repair Due to Accident Failures During The Upgrading Process
- Earn more BIOS Lifespan by Reducing Unnecessary Rewriting Process -
[ZH77A-G43] BETA UEFI Version [E7758IMS.1xx Releases]
E7758IMS.160 FULL RELEASE BIOS
- Support Windows8 Feature.
- Update CPU Micro Code.
- Update ME8.1 1318 firmware.
- Update onboard Realtek UEFI driver.
- Improved gaming keyboard compatibility.
- Auto select UEFI/Legacy mode by VBIOS & system BIOS.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!E7758IMS.160 ==> E7758IMS.183
01.Fix whql test fail after support 18 languages.
01.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory.
02.Modify watchdog timer function code.
03.Fix PCIE GEN3 display card issue.
04.Fix 'Integrated Graphics Share Memory' and 'DVMT Memory' item show incorrect.
05.update realtek uefi pxe rom.
06.Fix NV's GOP crad will lag & freeze in setup when win8 Enable.
07.Fix press DEL key can't entry BIOS Setup when fast boot enabled after.
08.Modify fast boot default to disabled when win8 disabled.
09.Fix USB Support and Fast Boot item help string show error issue.
10.Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
11.Fix SATA Devices Support function error issue.
12.Fix ps2 keyboard can't use in os when msi fast boot enabled.
01.Fix USB3.0 can not work when OC genie enabled.
02.Fix oc profile fail.
01.Add EIP99882 to fix Win8 OS will hang 0D when set usb support to Partial Initial after reset.
02.Modify OC Genie Mode help string.
01.Fix USB mouse cannot be use under UEFI bios setup issue if you plug the mouse after booting up the system.
02.Add GOP hot-plug solution.
03.Fix the issue that hot plug usb device will clear screeen when cpu memory changed OR oc fail message appear.
04.Fix post process, the phenomenon of the dialog box will appear if you press F12 Key some cases there will be the phenomenon of the crash.
05.Modify PS/2 Mouse&KB wakeup help string.
06.Fix WIN7 64 Bit OS S4 resume fail issue when BIOS Setup install password and password check set boot mode.
01.Remove F1,F2 information after clear CMOS.
01.Fix system will reset after clear cmos and press F1.
02.Add F1,F2 information after clear CMOS.
01.Fix F12 issue for two ps2 port bom.
02.Modify BIOS Setup USB Support item.
03.Modify DMI type1 and DMI type 2 Manufacture from write once to unlimited.
01.Add UpdateBiosAndME function error message issue.
02.Add some spi rom support.
03.Fix quit without saving will reset when connect a uefi os.
04.Patch Fast Boot "SATA Device Support" disabled function fail.
05.Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown.
06.Update the solution of "Fix USB3.0 cannot work when OC genie enabled".
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing. -
[Z77IA-E53] UEFI Bios Version [E7733IMS.Axx Releases]
E7733IMS.A20 ==> E7733IMS.A31
01.Update CRB base 024 follow 7751 H74 BIOS
02.Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown
03.Patch NV Quadro NVS450 card S3 fail
This is a beta bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!E7733IMS.A41 ==> E7733IMS.A43 BETA BIOS
VGA BIOS : 2137
ME Version : 8.1.40.1416 Updated with this bios.
RAID ROM : RST_11.5.0.1207
LAN OptionRom : 2.41
Device OptionRom : N/A
01. Update Fixbootorder module to support AMI BCP tool.
Update CRB base follow 7751 HA1 BIOS
01. Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000019).
&Update CPU Microcode for Sandy Bridge Q-0 and D-2(M12206A7_00000029).
02. Add solution to fix System hang up "A2" with some hard disk.
03. Adjust Fast Boot PS2 Devices Support disable function incorrect solution.
04. Remove Switch to PLL mode for clock buffer solution.
05. Patch Fast Boot PS2 Devices Support disable function incorrect.
06. Update ME 8.1.40.1416.
07. Modify the PCH Sata Aggressive LPM Support item default value.
08. Switch to PLL mode for clock buffer.
09. Fix can't detect LSI 9270-8i RAID card.
10. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
but the option has display garbled.
11. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
12. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
13. Fix clear cmos after boot option priorities show error issue.
14. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
15. Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
to patch some NV's graphics card capability issue.
16. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
17. Fix some monitor hang B2 issue.
18. Change French language error in the option "Load Overclocking Profile x".
19. Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
20. Update SMBIOS module ver 34.
21. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
22. Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown.
23. Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
24. Fix post process, the phenomenon of the dialog box will appear
if you press F12 Key some cases there will be the phenomenon of the crash.
25. Fix select BIOS Setup Discard Changes and Exit item after can't enter os issue.
26. Fix F12 Snapshot function error issue when post press F12 and Del key.
27. Patch NV Quadro NVS450 card S3 fail.
28. Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
"Secondary Plane Turbo Power Limit" range to 4096.
29. Fix it will show error characters in Boot device priority after disable some boot options.
This is a beta bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!
[/quote] -
[B87M-E45] UEFI Bios Versions [E7817IMS.Axx Releases]
E7817IMS.A10 [MP Bios Release]
VGA BIOS : 2177
GOP : 5.0.1035
ME Version : 9.0.20.1447
RAID ROM : 12.0.0.1783
LAN OptionRom : 2.53 (UEFI v2.021)
Device OptionRom : N/A
Release MP Bios
This is a full release bios. It's use is done solely at your risk! Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Once the flash is complete, you must download and install the latest ME drivers.E7817IMS.A20 ===> E7817IMS.A31
VGA BIOS : 2177
GOP : 5.0.1035
ME Version : 9.0.21.1462
RAID ROM : 12.0.0.1783
LAN OptionRom : 2.53 (UEFI v2.021)
Device OptionRom : N/A
01. Update code base to 4.6.5.4_VEB_1AQQW032a
02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m162
& MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m165
a. Remove 4 DIMM Memory Presets option when model is 2 DIMM design.
b. Add more Memory Presets option.
c. Grayout DRAM Training item when user password installed.
d. Fix system hang on 0x55 issue when use G.SKILL F3-2800C12Q-32GTXDG(12-14-14-35) memory and XMP is enabled.
e. Modify DRAM frequency above 2000MHz and tCL is 7 patch solution.
f. Patch MUSHKIN 991768 memory RST jump error for 7866.
g. Patch ADATA AD3U1600W4G11-B memory RST jump error.
h. Patch SWISSBIT MGU02G64E1BA2EP-BBR memory can't boot into OS issue.
i. Fix system hang on 0xFF problem when system boot with some BCLK setting and issue the warm reset.
j. Modify some coding syntax avoid compile fail.
03. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m074
& GSESetup module to SharkBaySetup_m021
& MSI GSEII Common Private module to MSI_GSEII_Common_Private_m013
& MSI GSEII SharkBay Private module to MSI_GSEII_SharkBay_Private_m015
a. Fix setup item (IEEE1394 and USB30) can be select when user password.
b. Update to support CRB 4.6.5.4_VEB_1AQQW032.
04. Update OSSelect module to OSSelect_m020
a. Base on CRB32 to update SecurityBootFlavor version 22 to file for Windows 8 Configuration item.
05. Update MSI Multi Language module to MSI_Multi_Language_m008
a. Add SecureBootMode.uni string for CRB32.
06. Update uP1811 module to uP1811_m111
a. Modify VR 12VIN OCP Expander item help string for SharkBay platform.
07. Patch SATA driver detection issue and add item to control.
08. Support USB Device resume from S4/S5
09. Modify some item string for BIOS SPEC V8.16
10. Fix hardware monitor system fan1 speed.
11. Modify DMI type 3 manufacturer and version.
12. Fix CSM bom DMI type 2 product name.
This is a full release bios. It's use is done solely at your risk! Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Once the flash is complete, you must download and install the latest ME drivers. -
[Z77A-GD55] BETA UEFI Version [E7751IMS.1xx Releases]
E7751IMS.161 ==> E7751IMS.162
01. Update the CRB 022a Codebase.
02. Fix TPM item enabled issue when load default after.
03. Update the WIN8 Logo.
04. Fix sometimes system will hang up in the shutdown process after idle it for some time.
05. Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
06. Fix the PS2 KB/Mouse show yellow exclamation mark issue in OS.
07. Fix the connect Sata HDD will reset issue when use CRB 022a.
08. Fix OC Genie setting not set to item after OC Genie function enable.
09. Update ME8 8.1.0.1248 PV ver.
10. Add the FastBootOption module.
11. MFlash support Secure Flash & message blink when update BIOS/ME.
12. Modify skip sata item string and default value.
13. Add fast boot item show in the win8 configuration feature.
14. Remove skip add Bgrt to acpi function when "Windows 8 Logo requirement" item disabled.
15. Change Secure Boot item default value.
16. MRC Fast item show only when use user password.
17. Update Intel Ivy CPU GOP ver 3.0.13.1013.
18. Fix SmartFan function error issue.
19. Add amp function support.
20. Finetune G.Skill memory command rate timing.
21. Fix the issue that setting item "Command Rate" to 1t causes an unnecessary cold reset when bios was postting.
22. Fix some memory cause bios hang 0x3b or 0x4f when overclock cpu ratio to 42.
23. Update ME firmware message.
24. Fix some PCIE card can't detect issue.
25. Modify some WIN8 feature solution.
26. Add Gigadevice 25Q64BSIG" SPI ROM support.
27. Fix Classis Intrusion function fail.
28. Improve memory performance.
29. Update WIN8 Logo.
30. Fix the system reset issue when windows 8 logo requirement set enabled and sata hdd set raid Mode.
31. Fix set CsmLaunch value error issue when update CRB022a codebase.
32. Add language: Indonesian,Thai and Vietnamese Finalize.
33. Adjust Other PCI device ROM priority item default value.
34. Fix using AFU3.03RC02 to Flash BIOS error.
35. Fix TPM function fail issue.
36. Fixed MSI keyboard ES300MU can't detect issue.
37. Update BIOS Setup F12 key function.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.E7751IMS.163 ==> E7751IMS.164
01. Fix can not adjust cpu ratio when item "Hyper-threading" set to Disabled and item "Active Processor Cores" set to 1.
02. Adjust CPU Ratio keyin function.
03. Add win8 gop solution.
04. Patch sometimes check GOP driver in external VGA card fail when reset system.
05. Patch WinXP 32bit system would hang when installing NEC USB3.0 driver.
06. Fixed power button fail after resume from S3.
07. Update cpu Microcode M12306A9_00000015.
08. Fix windows boot manager boot sequence show error issue when load default after.
09. Fix DRAM frequency incorrect issue when use Patriot PV316G213C1K memory and XMP is enabled.
10. Support check GOP driver in external VGA card.
11. Fix some items of CPU Features form show error when load defalut.
12. Fix some item can not change value.
13. Fix Ipv6 function fail issue when update AMI CRB022a code.
14. Fix system hang on 0x55 issue when use Team Team-Elite-1866 memory.
15. Fix system hang on 0x55 issue when use SPD 800MHz memory and Sandy Bridge CPU.
16. Fix item "Internal PLL Overvoltage" always Enable when over clock cpu ratio.
17. Set item "Intel C-State" to enabled when use some special cpus (such as i5-3475s which oc ability are limited) to over clock cpu ratio to the ratio higher than the ratio 4 cores can reach at the same time.
18. Fix item "Adjust CPU Ratio" show error when adjust cpu ratio.
19. Add code for MSI Fast Boot.
20. Next boot after AC power loss run normal boot when fast boot enabled.
21. Support check GOP driver in external VGA card when fast boot enabled.
22. Modify 'Win 8 Configuration' to 'Windows 8 Configuration'.
23. Add OC Retry Counter Item.
24. Support MSI Fast Boot.
25. Fix WIN8 WHCK PCI Hardware test fail issue for Asmedia chip.
26. Update SMIFlash module 25.
27. Modify solution Fix install Infineon TPM software fail issue.
28. Fix system hang on 0x55 issue when use single side dual rank memory.
29. Fix Item "AMD Memroy Profile" can only choose "Disabled" option.
30. MSI Fast Boot item show only when use user password.
31. Fix oc profile fail.
32. Fixed PLL function enable caused set tRTL timing hang issue.
33. Fix post hang A0/A2 issue when select WIN8 Boot.
34. Remove "Press <DEL> or <F2> to enter setup." from post.
35. Fix U62 Roccat Pyra Wireless Mouse issue in bios setup.
36. Fix OEM Logo show error issue.
37. Fix Adjusted DRAM Frequency incorrect issue when XMP is enabled and set different DRAM frequency.
38. Fix Adjusted DRAM Frequency and XMP info incorrect issue when use XMP 3000 memory and if XMP 3000 profile is enabled then force run 2800.
39. Fix Item "DRAM Frequency" will be always reset to Auto when bios reset. (only occured when using sandybridge cpu)
40. Disable power button when erase/write the rom hole or set the nvram variable.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing. -
[X79A-GD45] BETA UEFI Version [E7735IMS.1xx Releases]
E7735IMS.160 ==> E7735IMS.17A
1. Change memory run XMP timing solution when memory frequency is >=1866MHz
2. Auto adjust Voltage when Dram frequency manuel select memory frequency >=1866MHz and XMP is disable.
3. Fix 2 profile XMP Dram frequency information incorrect issue when XMP function and XMP function with My OC Genie select to diffrent profile.
4. Fix XMP Dram frequency information incorrect issue with special XMP speed like 1750MHz or 2250MHz.
5. Fix Vdroop Offset Control item setting incorrect issue.
6. Add the Network stack item.
7. Patch A4tech 7100 wireless combo keyboard can't use in setup.
8. Patch UEFI device Boot Option Priorities always on 1st Boot after UEFI OS HDD removed.
9. Fix the BIOS boot hang B2 issue.(This could happend in post runtime remove storge device)
10. Fix S4 resume issue. (when e820 memory table corruption on the Ready to Boot event)
11. Fix when BCLK select to 103MHz,current dram frequency show different to adjusted dram frequency.
1. Add setup voltage item keyin function support
1. POST LED will show CPU Temp after boot.
2. Add tRFC option range to 450T.
3. Fix XMP-1500MHz memory enable XMP,adjusted memory frequency show 1500.
4. Fix kernel-Processor-Power error in windows when adjusetd cpu ratio.
1. Patch keyin function code behavior.
2. Move Internal PLL Overvoltage function to PEI phase.
3. Change OC Genie Dram Volt to XMP volt instead of fix 1.65v.
1. Add setup item "PCI ROM Priority" and default as "Legacy ROM".
2. Fixed DMI type17 show error(only for 4 dimm model).
1. Hide item "PCI ROM Priority" and default as "Legacy ROM".
2. Set Option "EUP 2013" default to disable
1.Support CPU ratio keyin function.
2.X79 support MRC cold boot fast function.
3.If plug 2 different XMP dram, auto gray XMP item.
4.Fix system can be wakeup from S4/S5 by PS2 keyboard when "Resume From S3/S4/S5 by PS2 Mouse" is set to enable and "Resume From S3/S4/S5 by PS2 keyboard" is set to disable.(vice versa)
1. Fix show CPU or memory change information when system boot.
1.When use not K series CPU ,don't auto disable C-state when manual set CPU ratio > 4
core turbo ratio + overclockbin.
2.Disable Power button when NVRAM writing.
3.Add AMP Memory support.
4.Fixed X79 MRC Boot time too long.
5.Fix system random hang and can't boot to OS issue when use AMD Patriot AP38G1608U2K memory.
6.Patch after update GSE,some item can't be adjusted.
7.Fix XMP memory Dram voltage error.
8.Add OC Retry Counter Item.
9.Add Gigadevice 25Q64BSIG SPI ROM support.
Change SMLink1 Thermal Reporting Select to true.
10.Fix E5 2665 CPU hang "5A".
11.Patch CORSAIR CMZ8GXM3M2A1866C9 enable XMP can't boot issue.
12.Fix tRTL & tXP always show 0 after update RC code to 4.6.4.1_Intel_SandyBridgeE_18
13.Patch new CPU 3970X "adjust CPU ratio in OS" function error.
14.Fix sometimes system will hang up in the shutdown process after idle it for some time.
1.Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
2.Fix Keyin function.
3.Add the solution about " windows boot manger".
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.E7735IMS.160 ==> E7735IMS.17A
1. Change memory run XMP timing solution when memory frequency is >=1866MHz
2. Auto adjust Voltage when Dram frequency manuel select memory frequency >=1866MHz and XMP is disable.
3. Fix 2 profile XMP Dram frequency information incorrect issue when XMP function and XMP function with My OC Genie select to diffrent profile.
4. Fix XMP Dram frequency information incorrect issue with special XMP speed like 1750MHz or 2250MHz.
5. Fix Vdroop Offset Control item setting incorrect issue.
6. Add the Network stack item.
7. Patch A4tech 7100 wireless combo keyboard can't use in setup.
8. Patch UEFI device Boot Option Priorities always on 1st Boot after UEFI OS HDD removed.
9. Fix the BIOS boot hang B2 issue.(This could happend in post runtime remove storge device)
10. Fix S4 resume issue. (when e820 memory table corruption on the Ready to Boot event)
11. Fix when BCLK select to 103MHz,current dram frequency show different to adjusted dram frequency.
1. Add setup voltage item keyin function support
1. POST LED will show CPU Temp after boot.
2. Add tRFC option range to 450T.
3. Fix XMP-1500MHz memory enable XMP,adjusted memory frequency show 1500.
4. Fix kernel-Processor-Power error in windows when adjusetd cpu ratio.
1. Patch keyin function code behavior.
2. Move Internal PLL Overvoltage function to PEI phase.
3. Change OC Genie Dram Volt to XMP volt instead of fix 1.65v.
1. Add setup item "PCI ROM Priority" and default as "Legacy ROM".
2. Fixed DMI type17 show error(only for 4 dimm model).
1. Hide item "PCI ROM Priority" and default as "Legacy ROM".
2. Set Option "EUP 2013" default to disable
1.Support CPU ratio keyin function.
2.X79 support MRC cold boot fast function.
3.If plug 2 different XMP dram, auto gray XMP item.
4.Fix system can be wakeup from S4/S5 by PS2 keyboard when "Resume From S3/S4/S5 by PS2 Mouse" is set to enable and "Resume From S3/S4/S5 by PS2 keyboard" is set to disable.(vice versa)
1. Fix show CPU or memory change information when system boot.
1.When use not K series CPU ,don't auto disable C-state when manual set CPU ratio > 4
core turbo ratio + overclockbin.
2.Disable Power button when NVRAM writing.
3.Add AMP Memory support.
4.Fixed X79 MRC Boot time too long.
5.Fix system random hang and can't boot to OS issue when use AMD Patriot AP38G1608U2K memory.
6.Patch after update GSE,some item can't be adjusted.
7.Fix XMP memory Dram voltage error.
8.Add OC Retry Counter Item.
9.Add Gigadevice 25Q64BSIG SPI ROM support.
Change SMLink1 Thermal Reporting Select to true.
10.Fix E5 2665 CPU hang "5A".
11.Patch CORSAIR CMZ8GXM3M2A1866C9 enable XMP can't boot issue.
12.Fix tRTL & tXP always show 0 after update RC code to 4.6.4.1_Intel_SandyBridgeE_18
13.Patch new CPU 3970X "adjust CPU ratio in OS" function error.
14.Fix sometimes system will hang up in the shutdown process after idle it for some time.
1.Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
2.Fix Keyin function.
3.Add the solution about " windows boot manger".
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing. -
Z97 GAMING 5 BETA UEFI Version [E7917IMS.1xx Releases]
E7917IMS.170 ===> E7917IMS.181
Changes:
* Fixed the Cooler Master Storm Havoc and Cooler and Storm Reaper
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.E7917IMS.180 ===> E7917IMS.191
Changes:
01. Patch HDMI to D-Sub connect may cause VBIOS display error.
02. Update MSI GSEII module to 4.6.2_TSE_2_17_1246_m120
a. Fix complier issue when ClickBIOSUI dump to version m020.
b. Fix Memory Try It item dialog don't show when item is over 16.
03. Down ClickBIOSUI module to ClickBIOSUI_m020
04. Fix boot device error when system plug Samsung M.2 SSD + Asmedia SATA port & SB SATA
port both have SATA device.
05. Patch PE test hang A2 after clear CMOS.
06. Update MSI GSEII module to 4.6.2_TSE_2_17_1246_m119
a. Fix XMP button is not active in UEFI mode.
b. Fix ChangeLog dialog support Page Up/Down, Home and End key.
c. Fix the WIN8 logo will disappear after reset BIOS When installing WIN8.1.
07. Update MFLASH module to MFLASH_m032
a. Fixes a bug that display incorrect languages about Simplified Chinese and Traditional Chinese.
b. Update multiple BIOS configuration notice.
08. Update FITC module to FITC_ME9.1_1.5M_1005_m010
a. Update ME9.1_1.5M_9.1.25.1005
09. Fix DMI type8F show MEFW version issue
10. Patch PE test random hang A2 & Asmedia SATA port can't detect device.
11. Fix when system running USB memtest86 will hang after pressing power button.
12. Update VBIOS 5.5.1035 & GOP Driver to 5.5.1031
13. Add CPU MicroCode - M2240671_FFFF0003 Intel(R) Broadwell-H Processor E-0 Stepping.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
download: https://www.dropbox.com/s/r5kg1yr8mcj944p/E7917IMS.191.rar?dl=0 -
[A75MA-G55] BETA & Release Versions [E7696IMS.1xx Releases]
Fixes since E7696IMS.150
Patch some PowerSupply can't work issue.
Set "PCI ROM Priority" default to "Legacy ROM".
Fix hang at B2 with Intel Ethernet adapter card (I350-T2) on PCIE 1 or 4.
Fix "CPU Voltage" item value can't keep issue.
Add Patch Code disable PWR Button function when M-Flash or flashing BIOS in DOS.
Fix the BIOS boot hang B2 issue.
Fix S4 resume issue.
Fix system couldn't boot to dos automatically.
Fixed clear coms or use M-Flash update bios "Windows Boot Manager" will lost.
Fix windows boot order will be disordered after clear coms or load default.
Fixed system can't boot up when press 'Del' or 'F11' key with using AMD A4-3300 (AD3300OJZ22GX/HX) sometimes.
Fix USB keyboard and mouse would useless after using m-flash boot function.
>>Use the MSI HQ Forum USB flasher<<E7696AMS.168 ==> E7696AMS.169
1. Patch chassis intrusion function error issue.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing. -
[A55M-P25/P33] BETA Version [E7786AMS.1xx Releases]
E7786AMS.160 ==> E7786AMS.171
1.Update USB module to fix some usb device compatible issue.
2.Fix use usb card reader error issue when update usb 022 module.
3.Add slp20 support.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing. -
X99S GAMING 9 AC BETA UEFI Version [E7882IMS.1xx Releases]
E7882IMS.120 ===> E7882IMS.133
Changes:
1.Add solution to support M.2 Samsung XP941 (MZHPU128HCGM) device.
Add PcieSataController_01 module.
Update SataExpress_m003 module.
Update 5.004_AHCI_04 module.
2.Update GBI_m017 module.
3.Update MemoryZ_m009 module.
4.Fix NV Titan VGA 3Dmark issue.
5.fix mouse scrolling function.
6.Adjust USB s5 wakeup function.
7.Patch current CPU ratio information incorrect issue in CPU Specifications.
8.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
9.Add some common code and hook.
10.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
load BIOS default setting.
11.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
12.Fix Turbo Boost behavior abnormal issue when resume from S3.
13.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.
1.Update GBI_m018 module.
1.Fix the wrong spelling for Unknown Vendor.
2.Fix the wrong spelling for Keyboard.
2.Update RomHole_m016 module.
1.Fix don't save OcInfoPassToSetup data in OCProfile to avoid OC function fail.
3.Update MFlash_m018 module.
1.Fixed MSI's recovery GUID conflicted with AMI.
2.Set a variable to notify OC to run OC default setting when updating BIOS.
3.Changed the recovery mode from AMI's rule to MSI's rule.
4.Modified the label name of MFlash sample code
5.Fixed incorrect memory assignment
4.Update ISL6388_m204 module.
1.Modify PCIE base address related code.
5.Update MsiOc_LituyaBay_m125 module.
A.Modify auto adjust CPU Over Temperature Protection related code.
B.Let system run OC default setting when MFlash updating BIOS.
C.Fix Memory Try It item string incorrect issue when change to other language or load from
OC Profile.
D.Modify some item help string and add multi language string from BIOS spec 955.
E.Modify auto adjust tREFI timing related code.
6.Update MsiOc_LituyaBay_m124 module.
1.Patch current CPU ratio information incorrect issue in CPU Specifications.
2.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
3.Fixed Mem patch group can't show in setup and hide show patch memory information.
4.Add memory Chip ID support.
A.Add some common code and hook.
B.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
load BIOS default setting.
C.Correct maximum memory clock speed and configured memory clock speed in SMBIOS Type 17.
D.Modify some DRAM timing auto setting.
E.Patch memtest fail issue when use Kingston HX424C12PBK4/32 memory and XMP is enabled.
F.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
G.Add more option for CPU Over Temperature Protection item and show warning message if set
over 105 degree and modify item help string.
H.Fix Turbo Boost behavior abnormal issue when resume from S3.
I.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.
7.Update NCT5605_m007 module.
A.Fixed when EuP 2013 enable, CPU Fan can't work after S4.
Disable NCT5605Smi_SUPPORT.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.E7882IMS.130 ===> E7882IMS.141
Changes:
01. Add erp 020.
02. Modify temperature unit show error.
03. Modify board explorer
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Maybe you are looking for
-
Connect N82 with my laptop wi fi
Hello, pls i need help on how to connect my N82 with my Laptop (no router). I want to sync my outlook frequently as well as share music with my laptop. Pls post steps and procedures.
-
How to know the activity sender ?
Hello, All I am working on CRM 5.0 activity management, For the activity assigned to me I want to know who assigned it to me (on the PCUI) Regards Jacopo François
-
'Query Count Hits' on a particular COLUMN on a table, gives error 'Internal SQL statement execution error: 2'. (conversion from 4.5 to 6) although trapping this error using the on-error trigger and setting the system.message_level to '0' works but th
-
What's different between KT266 and KT266A chipset?
As title.
-
How can I download and install Adobe Flash Player?
Actually, I think I have downloaded Flash Player 9 (Adobe confirms not only download but installation), but the player does not work. I receive a message "There is no default application specified to open the document "Flash Player.plug.in" in both S