Z835 What order do I install the drivers?

I want to do a clean install and I want to be in control what drivers I install, but I need some guideance in what order I should install the different drivers for every thing to work optimal.
thanks
Z835-P360 

Hi,
its not so tragical how you install them, but if you need a order how to install then you should do it like following:
Chipset Utility
Toshiba Console
Aggressive C3
Display Driver
Sound Driver
LAN Driver
Wireless LAN Driver
PowerSaver
Utilites
and then the other stuff
Thats like I would do it :)
Greetings

Similar Messages

  • Building a new PC, in what order should I install drivers, flash BIOS, etc?

    Hi all.  I've just decided to take the plunge and buy a K8T Neo (w/Athlon 64 3000) and was wondering if anyone (Bas?) could tell me in what order I should install the various drivers (and what versions are the most stable) for the board/chipset and whether I should flash the BIOS before or after installing Windows, yadda, yadda, yadda.
    Also, I am going to be using a pro-audio card (WaveCenter PCI) and was thinking it'd be a good idea to disable the onboard audio.  Is this possible/wise?
    Finally, for RAM I'm thinking of getting two sticks of Crucial 512MB DDR PC3200 (CT6464Z40B) as it appears there are at least two people out there with stable systems running this RAM.  Can anyone say otherwise?
    Thanks,
    Kogepan

    Thanks Bas, you're golden!

  • HT3986 What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?

    What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?

    Kmasry wrote:
    What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?
    Best thing is to read the instructions before you start actually, but now you need to go back to OSX, start Boot Camp Assistant again and perform the first task on the list, download the Windows Support Software, then go back to Windows and install it. You'll need a thumb drive or a blank DVD to store the drivers on.

  • I installed bootcamp 4.0 4033, installed window 32 bit but can't install the drivers for some reason i keep getting error message. i have a macbook pro mid 2011 version. Please help

    I installed bootcamp 4.0 4033 so that I can install windows 7 32 bit on my mac.  Everything works fine until I try to install the drivers and I get an error message stating the version of windows does not work with the drivers I am trying to install.  I have a feeling somehow I am downloading 64 bit drivers when I need 32 bit.  I spoke to Apple and they said I can't use 32 bit windows.. but that is not what the support site says (it says I can as long as I use bootcamp 4, not 5).  Also, my bootcamp assistant is version 5.. I have no idea if that matters.  Help please.. been searching online for hours. 

    What model/year is your Macbook Pro? What operating system version?

  • Do I need to install the drivers on my old Mac Pro disc or from my Snow Leopard disc?

    Hi,
    I've got a 2008 Mac Pro (dual quad @ 3GHz) w/ 24GB RAM and I've got Windows 7 Ultimate 64-bit installed. What do I need to install?
    On my newer 2009 iMac (which included Mac OS X 10.6) I just inserted that disc specific to the iMac and installed the drivers, but the disc for my Mac Pro is old (10.5.2) do I need to install the drivers on it or not? Can I just insert my Snow Leopard 10.6 disc to install Boot Camp etc., or won't that include drivers for the Mac Pro? The Mac Pro is running Snow Leopard 10.6.8.
    Thanks.

    Thanks for your reply,
    I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
    I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
    I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
    Thanks.

  • Windows Update installed the drivers for the wrong sound card?

    I need serious help with this one.
    It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
    But wait, it gets even more frustrating.
    So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
    However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
    So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
    This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
    Windows 7 x64
    Sound Blaster Li've! 24bit
    I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
    Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

    Click on Start> ALL Programs > Creative > Creative Audio Console.
    Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

  • Windows XP won't recognize built-in wireless AFTER installing the drivers.

    Hello,
    I have an iMac, post leopard release.
    So I ran Bootcamp, everything went well, and windows XP runs fine. I used an XP Pro edition with SP2 and all of that is in order. I initially used a Leopard Install DVD of my friends to install the drivers, because I couldn't find the disk that came with my mac, and that worked until it got the wireless components, and then would crash windows.
    I then found, luckily, and put in the Mac OSX install disk that came with my mac and that installed the drivers.
    (or at least I think it did, it sure looked like it was, but afterwards it seemed as though all it did was install a program called Bootcamp that helps with running dual systems on a Mac.)
    But XP wont pick up any wireless networks on the page where you can manage your networks. It's as if I have no built in wireless.
    I don't know if you have to actually set up the built in wireless to work with windows, or if the disks I put in actually didn't install the drivers. but I'm starting to go insane...
    (on one last side note, my wireless mighty mouse and wireless keyboard won't connect in XP either, BUT only after I used the Mac OSX install CD.... it's very strange....

    Any luck on the wireless issue? I too have a MacBook Pro that accesses the wireless internet with no problems on the Mac side. That is not the case on the PC side, using the Windows XP Professional. I can not access any internet, wireless or hardwired directly into the router. As a matter of fact, the Internet Wizard runs on the PC side and ends saying error.
    I've contacted my internet provider, who walked me through the process to create a new internet account, still no luck. Ideas would be wonderful seeing that I have a single piece of PC only software I am trying to use for some charity work.

  • MSI N770 TF 2GD5/OC not working system cannot find it to install the drivers

    have just built a new gaming rig and used the MSI Z97 gaming 9 and the MSI N770 TF 2GD5/OC i set up the pc turned it on without the graphics installed and installed all the mother board drivers and then updated them all using live update 6.
    then when i added the graphics card and powered it back on the fans spin on it but when i got to install the drivers it says failed to find the hardware so the computer doesn't know its there
    have reset pc and changes slots but nothing seems to work every now and then it will load up and i use it for 5 mins then the screen loses its data and the mouse and keyboard lock up till i go back to using the on board HDMI port
    has any body encountered this if so how do i fix it

    What was updated with Live Update?
    Did you try clearing CMOS? >>Clear CMOS Guide<<
    What is the actual Power supply? As EVGA 750B is not enough info, though I guess it's powerful enough to power gtx770.
    Tried with single RAM stick?
    Also try with motherboard outside of the case.

  • HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

    Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
    P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
    my bootcamp version in windows 7 is 2.1..

    Uninstall 2.x totally
    Use CCleaner Registry tool
    Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
    BC 2.2 was XP and Vista only

  • Problem with installing the drivers from cd-rom CTREG

    I have the following problems.
    st.. this one is the most urgent.. the problem is I can't seem to install from a drivers cd.. the error I get is like CTREGSVR.. it says it cannot find differnt applications on dri've c... there is like a whole bunch and in the end you just keep clicking ok ok ok until it continues to install. the drivers intll fine but none of the appliations seem to work. the funny thing is with the message is that its looking for someing like c:\program files\creative\sbzs2\then differnt dll and stuff and it says it cannot be found..
    the other problem I have is that once in a blue moon the mixer will not work and the only way to get it work is to pretty much go through the painful installin/re-intallation of the whole thing because nothing seems to work. It says the sounds blaster card could not be found...
    anyways if you guys could just help me out with the st prob. that would be great.
    thanks.

    Hi.. someone help me out please.. this is the screen I always get
    click on the link http://home.comcast.net/~alphaext/problem.jpg

  • I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

    I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

    Welcome to Apple Support Communities
    You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

  • Using bootcamp 5.1, Windows 7 home is installed but missed installing the drivers disk. How to install the Mac drivers for windows after the fact.

    While using Bootcamp 5.1, and OS X 10.8.2, I partitioned my Mac disk with 80 Gigs for Windows 7 home and the install went great, but I must have missed the time when I was to install the Mac drivers disk to install the drivers for Windows,(when in Windows I don't have a mouse or optical drive.)  Is there a way to install the drivers after Windows is installed, or do I have to go through the whole process all over again?

    Press X key after the startup sound to boot into OS X. Then, open Boot Camp Assistant, download Boot Camp drivers and burn them into a USB drive or DVD. Finally, boot in Windows and install drivers

  • I NEED TO INSTALL THE DRIVERS IN MY TOSHIBA CANVIO EXT HD 1.5TB USB 3.0

    I WAS TRYING TO MAKE A CLONE FROM MY HP LAPTOPS  SAMSUNG HD  TO THE  NEW TOSHIBA HD,  MY  BUT INSTEAD THE PROCESS FAIL . BUT IT DID SUCCEED IN  MESSING UP MY DAY INSTEAD. IT DELETED EVERY THING ON THE NEW DRIVE. SO CAN SOMEONE PLEASE TELL HOW TO REPARTITION THE DRIVE ALSO INSTALL THE DRIVERS TO IT . NOW I HAVE THE WINDOWS 8 SOFTWARE.BUT I NEED TO PLACE A LETTER ON THE DRIVE BEFORE I CAN SEND THE WINDOWS 8 SOFTWARE TO IT, I SEEM TO FORGOTTEN HOW TO DO THAT . I WAS PLANNING TO REMOVE THE HAD OUT OF ITS CASE AND MOUNT IT INTO THE LAPTOP, WOULD I STILL NEED THE UTILITIES & DRIVERS FOR THE TOSHIBA? OR WOULD I SET A LETTER TO THE DRIVE AN PLACE THE WINDOWS 8 DISC IN THE DVD DRIVE AND INSTALL WINDOWS 8 THAT WAY? I COULD SURE USE SOME ADVICE FROM A GOOD TECH. I REALLY DO APPRECIATE ANY HELP ANYBODY CANE GIVE ME. THANKS!          [email protected]

    I WAS TRYING TO MAKE A CLONE FROM MY HP LAPTOPS  SAMSUNG HD  TO THE  NEW TOSHIBA HD,  MY  BUT INSTEAD THE PROCESS FAIL . BUT IT DID SUCCEED IN  MESSING UP MY DAY INSTEAD. IT DELETED EVERY THING ON THE NEW DRIVE. SO CAN SOMEONE PLEASE TELL HOW TO REPARTITION THE DRIVE ALSO INSTALL THE DRIVERS TO IT . NOW I HAVE THE WINDOWS 8 SOFTWARE.BUT I NEED TO PLACE A LETTER ON THE DRIVE BEFORE I CAN SEND THE WINDOWS 8 SOFTWARE TO IT, I SEEM TO FORGOTTEN HOW TO DO THAT . I WAS PLANNING TO REMOVE THE HAD OUT OF ITS CASE AND MOUNT IT INTO THE LAPTOP, WOULD I STILL NEED THE UTILITIES & DRIVERS FOR THE TOSHIBA? OR WOULD I SET A LETTER TO THE DRIVE AN PLACE THE WINDOWS 8 DISC IN THE DVD DRIVE AND INSTALL WINDOWS 8 THAT WAY? I COULD SURE USE SOME ADVICE FROM A GOOD TECH. I REALLY DO APPRECIATE ANY HELP ANYBODY CANE GIVE ME. THANKS!          [email protected]

  • In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

    in which boot camp support software I can install the drivers for win 7 32 bit.
    my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
    also my macbook pro model is MC723.

    Read this. You need to be running Snow Leopard or later.
    http://support.apple.com/kb/ht3986

  • Dear I need to upgrade my Mac Bookpro from 10.4.11 to the latest software is there is any solutions in order to buy install the software online through itunes or so

    Dear I need to upgrade my Mac Bookpro from 10.4.11 to the latest software is there is any solutions in order to buy install the software online through itunes or so

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    (NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes.
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Maybe you are looking for