Z87-41 pc mate no post/ no video signal

Hey everyone, I just completed a fresh build with my second MSI motherboard, the first build went great so just finished the second.
I have finished putting everything together, and now when I try to boot (first boot ever) it wont post or I have no video out...
The monitor has both HDMI and VGA, neither are getting a signal or so it seems.
I have double checked connections fan's and everything are running, I've tried a different HDD as well as the SSD I'm using in it.
Also changed the ram out still nothing.
Components:
z87-41 PCmate
i5-4690
corsair HX650 PSU
corsair h60
adata xpg v2 2x8gb ram
Samsung 840 SSD 250gb
No graphics card, just running on-board for now.
I am out of ideas if anyone can help i could use some suggestions.
Thanks

board may need bios update to boot with your CPU used:
http://www.msi.com/support/mb/Z87-G41-PC-Mate.html#support-cpu
Quote
corsair h60
have you tried to reseat the CPU and to use stock CPU cooler instead?

Similar Messages

Z87-G41 gives no video signal; no POST code

Hello.
I finished putting together my third build yesterday using a Z87-G41 and have run into a problem I've never experienced and haven't been able to find a solution online yet.
My problem:
With all components plugged into the motherboard/power (no GPU), I do not receive a video signal. I have tried both the VGA and DVI slots. I have tried multiple monitors. I have also tried using my GPU just to see. Same result all around.
In an attempt to get a POST code, I took everything out and started the process of elimination. The only code I get is bad/no RAM when none is plugged in. It of course ceases when I put it back in. I have tried multiple brands. All RAM is DDR3.
I will add that all components are out-of-the-box new except for my RAM/PSU, but they are also relatively new. I have tried another PSU just to see; same issue.
I have checked the CPU socket for bent/missing pins, but everything looks fine. I'm no expert, though.
I'd appreciate any help on this issue. Like I said, I've found info on this issue online, but all the solutions are really obvious stuff (using the wrong video port, etc.). No solution for me yet.
Thanks.

Quote from: badboy2k on 11-May-14, 02:15:06
>>Posting Guide<< please list your components you are using please!
Sorry about that.
Z87-G41 PC Mate MSI Motherboard (Model No. MS-7850)
Intel Core i5 Processor - i5-4670 LGA1150
G.Skill 8 gig DDR3 1600mhz RAM x 2
ADATA 256 gig SSD
Cooler Master HAF 922 Case
EVGA GTX 770
Antec 600w PSU

Onboard graphics Z87-G41 PC MATE

Hi all,
I am cross posting from another board hoping someone can help me out on this one!
This weekend I was able to piece everything together and install the OS for the first time. However, I had the intentions of utilizing the onboard graphics on my MSI mobo to run an extended desktop until I can decide on a GPU.
The following are components of this build:
Intel i5 4670k
Thermaltake Water 2.0 Pro 81.3 CFM Liquid CPU Cooler
MSI Z87-G41 PC Mate motherboard
G.Skill Ripjaws Series 4GB (2 x 2GB) DDR3-1600 Memory
Sandisk 32gb SSD
Seagate Barracuda 1 TB HDD
Corsair 550D Case
Thermaltake 600w PSU
Windows 7 Ultimate 64 Bit
I am able to work on the computer without the GPU without any issue for the time being, but before I add a new card I would like to run extended desktop. I work primarily in excel and its just a convenience to have the extended desktop. I know the onboard graphics for this mobo supports three display outputs and I currently have two hooked up, (DVI and HDMI) but I am only able to mirror the displays. In display settings only one monitor is recognized. I have enabled the multiple display setting in the bios as well.
Anyone encounter this issue or know how I can set up two displays? I know a new GPU will easily fix this but it could be some time before I decide on a card as I won't be doing any gaming until work slows down.
Thanks!
Michael

Have you enabled multi-monitor support in the BIOS? (Settings\Advanced)
By default it would seem to be disabled, the manual states:
"IGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external
graphics card. To support the Lucid Virtu MVP Technology, please enable this
item.
[Enabled] Enables IGD multi-screen function.
[Disabled] Disables IGD multi-screen function."

MSI Z87 G41 PC MATE GRAPHICS CARD ISSUE

Hey gus,
Yesterday I put together a new build, however I can only get integrated video to output to the monitor and not my discrete GPU. I have updated the bios to 1.4 from 1.2, made sure the GPU in question works (by trying on another machine) tried different cables etc etc. When I go into the BIOS I see there are two options for PEG and IGD modes. Default is PEG which is what it should be set to I would think. If anyone knows a fix for this issue please help! Thanks!
MOBO: MSI Z87 G41 PC MATE
PSU: THERMALTAKE 600 WATT
CPU; i5-4670K
GPU: GTX 560

>>Use the MSI HQ Forum USB flasher<<
Use option 1 pointed directly at the attached archive or run the bat file from pure dos.
This is bios 1.4
Make sure this is your board prior to flash: http://www.msi.com/product/mb/Z87-G41-PC-Mate.html#/?div=Driver&os=Win8.1 64
You will need to re-install the ME drivers after the flash.

When posting a video to Facebook from Camera app, how can I see the upload progress?

Normally I use the ProCamera app to upload photos and videos from my iPhone 5S but I'm having trouble with it lately so I switched the standard Camera app to post a video to Facebook. I know it successfully posted, I received a notification after a while but is there any way to tell the progress of an upload in Camera? ProCamera displays an uploading message at least but I don't see anything in the Camera app.

Did you have 'find my iPhone' activated on it? Because if you go to iCloud.com you can log in there and you can remotely lock or wipe your device. From what I hear, the police won't do anything about going and fetching stolen iPads and iPhones, but if you have find my iphone/ipad/ipod/mac turned on then it will give you a map of where it is.
Just keep in mind that sometimes iTunes does ask you for your password regardless, and only a few weeks ago apple brought in security questions, so everyone had to fill in security questions for their iTunes account to make it more secure If all else fails, ring Apple cusomer support and they might be able to bar your account or something, however you may have to make a new account (the might be able to set it up so you have all your previous information on a new account)
Hope this helps!

Video's are missing and can not post any video's and can no longer see on Facebook after upgrading mac software. Facebook says content is unavailable. Is this a facebook issue or is there something that I can do to fix on my mac.

Video's are missing from facebook album under photo's. It shows that I have 99 and only shows 24. These are not copyright problems. I have had them up for years. Now, I can not post any video's too. Message says that content is currently unavailable. It seemed to happen after I upgraded to 10.7.5 but it could be coincidental. Of course, I have not got any email from facebook to help with this problem and I am really frustrated that I can not find my video's and post any new ones anymore. Any help would be appreciated.

I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne

Do I have to use code in order to post my video on itunes?

do I have to use code in order to post my video on itunes?
Is there a uploader app than can help me avoid having to write a tremendous amout of code just to upload ONE film?
thank you
Al

You can not upload your videos to iTunes. iTunes podcasting section is just a directory of Podcast RSS feeds.
You will need to go to a 3rd party host such as Libsyn.com to upload your videos and then take the RSS feed from your libsyn account and submit that to iTunes.

How to post a video podcast

I have audio podcasts but how do I post a video podcast to iTunes

The same way you do the audio file - just upload the file to your current host - If they support video - and the post the episode just like you would audio.
Some Hosts are audio only - but other podcast hosts - like libsyn.com - do support both Audio and video files.
Rob W

How to post a video in an hexagonal form

I try to do a videoconference application, my interface is multi-user, each video must be posted in an "hexagonal" form. I created an "hexagonal" class which extends Panel and which contains a Paint function which draws an hexagon. my problem is: how to post my video in my hexagon.
can anybody help me to do that.
thank's for your help
regards
fara

Hi,
thanks for the idea.., its a good way to show the videos.
i tried with your cred, but not able to login.
can you please check and let me know.
http://apex.oracle.com
workspace : somefeto
username : [email protected]
password didnt take.
and one more query,
can i call the video which will be residing in my desktop only(not in web).
more over i must not allow the user to download the video(so i have to host it in my system only)
Thanks and Reagards,
Littlefoot
Edited by: Little Foot on Sep 5, 2012 4:27 AM

848P Neo-LS No Post, No Video, Died

I've been reading the last few threads dealing with this issue.
My run down has been pretty much the same except the last portion where the power supply died..
1.Turned on machine, No Post No Video
2.Checked Monitor pins, plugged into alt computer Monitor works.
3.Put a pci video card to check video, same result.
4.Cleared Bios settings, rebooted same result
5.Cleared CMOS put everything back together. No nothing, power supply nothing responds.
6.Spend 4 hours going through threads with similiar problems.
From what i've read my power supply is dangerously low. Especially on the 12 volt rails? amperage is only 16. New to this power supply amps/watts. Sounds like the PS is probably dead, i'm going to do futher testing on it.
This seems to be one work around but looks like massive pain for people who don't have acces to other cpus.
https://forum-en.msi.com/index.php?threadid=49763&sid=&threadview=0&hilight=&hilightuser=0&page=2
Another thread talks about the cpu being possibly bad
https://forum-en.msi.com/index.php?threadid=43958&sid=&threadview=0&hilight=&hilightuser=0&page=3
Although everything i've read seems to point away from this being a power supply issue, as once a person replaces it they have the same exact problem.
I've also read about people rma'ing there boards, to come up with the same exact problem.
Is there a direct problem relating to the p4 2.8 and Neo-ls series motherboards?
Has anyone else had any experiences with this problem? Any other ideas?
What power supply do you guys recommend?
Should I just scrap this mobo and go for something different? If so then what do you suggest?

Your power supply isn't on if the fan isn't running. With an ATX power supply it does have to be connected to the board, and the board has to be connected to the case Power switch. Obviously the power supply switch itself must be on.
This link shows what to jumper to test the power supply without connecting it to anything:
http://www.hardwaresecrets.com/faqpowersupply.html

Can't post pics +video together to Mobile me?

Hi. I have a new 3GS. It won't allow me to post a video with a pic to mobile me at the same time.
also, won't let me post more then one video to mobile me at the same time...
It lets me select them, just not publish...is this normal?

You can only upload one photo or one video to MobilMe at a time from the iPhone. If you want to transfer more, sync the photos to a recent version of iPhoto (using iTunes to do the syncing), then transfer them from iPhoto. (This assumes you're working on a Mac, of course.)

5hours left until they post a video without my per...

to go into short detail she recorded me on cam without my permission and now is asking for 950$, at first she let me use her credit card WITH permission. to allow to cam with her on a website, i followed everything she told me to do and now shes blackmailing me 950$ and if i dont send her cash at 10:30am today in 5 hours shes going to post a video of me all to my friends that she copied urls from so she can msg them without looking at my friend list on facebook, twitter, youtube, myspace, anywhere on the internet. please block her and cut her internet off or something :/ i tried looking to see if i can hack and delete the video but thats illegal even though i wouldve only deleted the video and only that. this has to be solved within 5 hours or else she'll post it pls contact facebook too as i can only send a report and not a detailed msg.
Elma Pastolero
IP adress 112.198.64.75
city makati
philipines
country code PH
longitude 14.5667
latitude 121.0333
ISP/global organization: globe telecoms please try and arrest her or something before that vid gets leaked TT_TT
look at my recent convos with her if you hafto
i even stayed up all night till 4:57am right now TT_TT

I think in some countries or localities, recording of phone conversations, which may include Skype calls and video calls, are prohibited or illegal. I suggest that you check your gov't website to check if your country/state/city has similar laws, and/or report this matter to your local police.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

MSI Z87-G41 PC Mate wont reboot

Hi All,
not sure if this is the right section, no matter what i try i cant get the pc to reboot. i've been through the bios mutiple times and even upgraded the power supply today and put windows 8.1 on... i'm out of ideas.
the system runs fine no errors/problems etc just for no love or money it wont restart. the screen will go off and doesn't come back on. i have to hold down the power and then turn it back on again.
set up as follows;
MSI Z87-G41 PC Mate Socket 1150 HDMI VGA DVI 8 Channel Audio ATX Motherboard
MSI GTX 760 TwinFrozr OC 2GB GDDR5 Dual DVI HDMI DisplayPort PCI-E Graphics Card
Crucial MX100 256GB SATA 6Gbps 2.5inch 7mm with 9.5mm adapter SSD
Intel Core i7 4790 3.60GHz Socket 1150 8MB L3 Cache Retail Boxed Processor
Corsair 8GB DDR3 1600MHz Vengeance Memory Module CL1
any help greatly appreciated

Quote from: Svet on 08-December-14, 16:07:42
which version it is exactly?
and have you flashed to this version when you got the board?
If so do you include BIOS+ME Update? [required] not sure the bios file was just downloaded and then flashed in the bios via USB. does the MSI bios include the +me as standard?
bios was updated because we believed that was the issue but same problem. the bios version is
how many sticks are they?
have you tried with 1 memory stick only? then to see if reboot issue will persist
only 1 x 8 gb stick so not an option unfortunately
you mean CL11? yes sorry
its weird when the computer is up and running its fine just doesn't reboot

970A G46 No post no video

New build can't get system to post or display any video: using an AMD X3 720 CPU, Sapphire 4650, GSkill Ripsaw DDR3 F3 14900cl 8gbxl x2, a Corsair 430 PS.
When I power on the 4 led on MOBO come on, all fans (CPU, Case, PS) on except the video card. So I swapped out the video card for a known working one twice with same result. Once same make and model and once with older ATI card.
Started systematic swapping of parts one by one. I changed the PS, video card, Ram, installed Ram one x one tried different video slot, sent the MOBO & ram back got new MOBO and ram installed it with same result no post no video display. Have checked all the pwr connections, both 8 & 24 pin installed, none needed on video card. Taken everything out of the case and tried it outside the box with no change. The only thing I can't do is swap CPU as other box is WinTel and don't have another AMD MOBO. I'm Stumped!

As you swapped anything else the cpu seems to be bad... See if any friend or workmate also has an AMD system to test it.

Press power button, No post, No Video. 20 seconds later power button flashes many different colors

Hi, Hope someone can be of help here. Working with one of the newer A135's w/ vista. Plugged in all looks good, charging light and all but when you press the power button all looks good at first but about 20 seconds into unit powered up, no post, no video no nothing I get the power light bar changing colors, it goes from dark blue to light blue to orange to amber to green and starts all over again. It appears that there are not too many people with the same problem so only actual support would be appreciated. I can solder to component level so if anyone has a schematic and area of potential search for the bum chip it would be greatly appreciated!

Hello Chatbox,
I can understand your issue very well, as there is no message comes on the screen which gives you information to plug the power adapter and prevent the laptop to get shut down.
You should install Power Manager software and then customize it as per your requirement.
The software can be download from the mentioned below web link.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8mu417ww.exe
Hope, after this laptop will not shut down automatically due to battery backup
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Z87-41 pc mate no post/ no video signal

Similar Messages

Maybe you are looking for