Z87-G43 gaming HDMI/DVI ports not working

Board: MSI Z87-G43 gaming edition
Bios: American Megatrends Inc. V10.3, 03/12/2013
VGA: AMD Radeon HD 7970/Samsung SyncMaster P2770
PSU: Corsair CS750M
Intel Core i5-4670K
MEM: 8gb
HDD: Plextor 240gb SSD
OS: Windows 7 64bit Professional
Can't figure why they don't work...I checked my CPU and it's supposed to support integrated GPU. HDMI and DVI work on my videocard so I know it's not a monitor issue. I believe my motherboard chipset drivers are up to date. Any ideas?

you could try to set it to IGD in your BIOS to get the Integrated only working (find a option in your BIOS that is set to PEG and change it to IGD and see how it goes)
NOTE: if you find that settings see if it has a both option!

Similar Messages

HDMI and DVI port not working on 880GMA-E35

Hello,
I want to use the HDMI port of my 880GMA-35, but the monitor is not getting a signal. I know that the board has two jumpers to switch between the DVI and the HDMI port. In the delivery state the jumper is set to HDMI, but I don't get a signal. There is also no signal, if I switch the jumper to the DVI pins. I have tested this setup which different cables (HDMI and DVI) and two different monitors.
After this test I get a guarantee replacement of the board. The new board is also not working with HDMI or DVI. The VGA port of the first board was working as supposed and I don't see any Bios settings to activate the monitor ports.
Are there any suggestions to solve my problem?
Thanks in advance and kindly regards
Daniel

>>Posting Guide<<
please read the above guide and follow it!
firstly we need alot more information to what componants you have in your system?
eg see my signature bellow this post for the type of information we need! main parts are:
motherboard
CPU
RAM
PSU (include the +12v ampage ratings)

Dvi port not working

I was doing a presentation today at a conference and switched projectors (both the same type). When I went from projector A (worked) to project B, my MBP would not recognise the display.
Same cable set up, same technology set up. I tried rebooting and still nothing. Any suggestions?

Do you mean the DVI port on the docking station?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

DVI port not working anymore after latest BIOS update on T410s

Hi all,
after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
Thanks and cheers!

Do you mean the DVI port on the docking station?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Mini DVI port not working on Macbook

I often watch movies streaming on the internet by connecting my Macbook to my television via my Mini DVI to S-video adaptor cable.
Last week, however, it suddenly stopped working. The television can still detect the display, but the image is super distorted and moving in a static-ey way. I can only vaguely make out the icons on my desktop on the TV screen.
I thought that perhaps my adaptor cable was at fault, so I bought a new one - but the problem remains. I have also tried resetting the PRAM, repairing the disc and permissions with Disc Utility, and cleaning the Mini DVI port. I am pretty certain that it is a hardware problem with the port itself.
One of the pins on my Mini DVI port looks like it could be out of place. It is kind of squished at the bottom of the port instead of laying flat like the others. I’m thinking that this might be the culprit. However, I have tried to straighten it out using a safety pin and I’m not really able to do it.
Am I right to assume this is a hardware problem with my port? Any advice about how I might go about fixing this? Is there a way to repair the port without having to replace the whole logic board?
The Macbook in question is a 2008 Core 2 Duo running Lion.
Any suggestions at all would be much appreciated!

Do not dismiss the possibility that the problem may be with the TV. Based on what you have tried so far, an appointment at an Apple store genius bar is your best option. The evaluation will be FREE and then you should be in a position to make an informed decision.
Ciao.

Mini-DVI port not working: wear and tear?

I had been happily using the mini-DVI port to play content on TV, using a DVI to Video adapter : plugging and unplugging probably twice a week.
Now it seems to have stopped, abruptly: no signal at all is reaching the TV. (Adapter still works fine on my MacBook.)
What are the chances of wear and tear damaging the DVI port? Is this a complicated fix? Any other thoughts? No recent upgrades or updates.
"About this Mac" reckons it's mirroring fine, so it feels like a hardware thing. Many thanks in advance.

Hello ewfelton
It is very possible that the DVI port on the iMac has been damaged from wear and tear, as it's harder to get at than the MacBook.
I would disconnect everything from the iMac, grab a clean towel and turn it face down on the desk. Then with a magnifying glass and light inspect the DVI port for a broken or bent pin. In the process of inspecting the port your SMC will also be reset, follow the instruction for "How to reset the System Management Controller" when your done.
If the port seems OK and the SMC reset doesn't get it going use Disk Utility to Repair Disk Premissions and try it again.
Your local Apple Store or local Apple Service Provider can replace a bad or damaged DVI port.
Dennis

Second DVI Port not working?

Hi,
I just purchased a HP Pavilion Slimline s5-1224 (windows 7 home premium) and an having problems hooking up 2 monitors via the built-in DVI outputs.
I have a monitor plugged into each of the DVI ports. The computer doesn't seem to detect any monitor plugged into the lower DVI port. I've tried switching a number of times; if a monitor is plugged into the top port, it works fine; if it's plugged into the bottom port, the computer doesn't detect it. I've tried going to the "screen resolution" menu to manually detect the second monitor, but hitting the "detect" button doesn't find the second monitor.
Is there some sort of trick to get dual-monitors working with this computer?
Thanks

Sharon43,
Please provide the brand and complete model numbers for the monitors you are trying to connect to your computer. Also indicate the exact methods you are using to connect the monitors.
As your HP Pavilion p6-2310 Desktop Computer has one DVI-D (digital only) output and one VGA (analog only) output, one monitor must support VGA input and the other monitor must support DVI-D input.
(#1) - DVI-D (digital) output (#2) - VGA (analog) output
The computer and monitors will need to be connected as follows;
Computer > DVI-D cable > Monitor #1
Computer > VGA cable > Monitor #2
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Z87-G43 Gaming no audio output

Hi
I have just built a new pc using the z87-g43 gaming board and can not get the audio to work. Sound works when windows is loading (win7), but once all is running I have no output to the speakers. I have updated to the latest bios and downloaded the latest realtek driver (6.0.1.6959)
I have i7 4771 chip
GTX 760 twin frozer OC
Bios is A.10
Sound Blaster Cinema 1.00.05 (though I have tried with this uninstalled).
Any ideas?
Thanks
Val

OK, so problem resolved. I was connecting to my AOC monitor (integrated speakers) with the HDMI cable plus the usual sound cable. The monitor was expecting the sound to be on the HDMI so was disabling the std sound input. Switched to using the DVI cable and all is working as expected.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

MSI GAMING 5 - ALL USB ports not working

hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank you

Quote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D

Z87-G43 Gaming reboot dont work

hello all
my new MSI mainboards have a problem of reboot: fans run, leds also, but nothing more... if i've a reboot to make, the only solution is to turn off the system, and re launch after.
i've make all the tests that i've think:
without graphiq card (using mainboard ship)
with only one memory stick (using differents slots)
remove all usb/sound and other case connectors (ssd/dvd/hdd also): boot by contact with "screwdriver"
re install the latest BIOS (V10.4) 2 times
all work fine except reboot....
my config:
MSI Z87-G43 Gaming
Intel core I5 4460 (the new edition of haswell)
GSKILL Ripjaws F3-12800CL9D-8GBXL (2x4go DDR3 1600 PC3 12800 c9-9-9-24 1.5v)
other (i dont think that's problem): gforce GTX770 2gb/ ssd 120gb intel 530/ wd black 1 tb/ DVD burner Asus
thanks if you can help.

could be memory issue look the sticky topic: https://forum-en.msi.com/index.php?topic=178019.0
else try latest version .A53: https://forum-en.msi.com/index.php?topic=177198.msg1298226#msg1298226

MSI Z87-G43 Gaming and R9 290 OC Windforce not playing nice

Hi, already tried search but can find a solution, i have an Z87-G43 Gaming(Bios 10.30) and bought an Gigabyte R9 290 OC ref:GV-R929OC-4GD-GA(BIOS F3L). All is on latest Firmware/BIOS.
The problem is that the motherboard wont recognize my 290 on first PCIE 3. It works on second 16x slot. THe thing is... An Gigabyte 7950,Sapphire 7970, Unknown NVIDIA 7200gs all work in the first slot... now that i got bf4 my 290 doesnt work in the first slot... Latest bios from MSI say's vga compat. improved. The computer boots fine with the integrated vga and in bios it shows the first slot as empty. Anyone?

Like I said best to contact both and see what you can do. When I check VBIOS for MSI cards, there are normally newer versions available, so best to check. On the other hand if it is a bios issue, MSI can get on it.
>>How to contact MSI.<<

Z87-G43 GAMING Dimm problems

Dear sir,
I bought a new motherboard (Z87-G43 GAMING). The problem is that the Dimms one and two does not work except the Dimms three and four. I have four Kingston memory each one has 8 GB.

An unfortunate I have event with developments today. The dealer has contacted me and informed me there was two scratch beside the socket Influenced the work of the Dimms slots one and two. So when I tried to put the heat sink on CPU the screwdriver Slipped on the electronic circuit board of the motherboard without knowing. The error was unintentional. The news was very painful for me. For that reason I Paid for a new motherboard. Sorry for the inconvenience.

Z87-G43 GAMING with Killer E2205, interrupted internet connection

Motherboard Z87-G43 GAMING with Killer E2205 Gigabit LAN controller
I am using the latest Killer Network Driver (driver only) 8.1.0.23, from MSI website.
The issue:
Occasionally my internet is interrupted and my network card needs to be disabled and re-enabled again to re-establish internet connection.
I am quite certain that it is the network card or driver fault. The logic of this is that other users in my home connected to the same ISP modem has uninterrupted internet connection, while my interruption is happening. Also, as soon as I have disabled and enabled in “Control Panel\Network and Internet\Network Connections”, the internet connection is back up. The process of disabling and enabling takes less than a few seconds.
My internet connection is automatically connected through the modem, I do not dial from my computer.
This problem has occurred ever since I got the motherboard, however it hasn’t really bothered me that much until now.
I recently started playing Counter-Strike Global Offensive, and for those of you who plays CS:GO, also knows that it is not cool to have interrupted internet connection during a competitive match.
Does anyone know how to fix this issue?
Thanks

try a different network cable, different router port, try reset your router and/or load its default config and/or update it firmware

HP 15 r-150 HDMI no signal not working

HDMI port not working !!! HDMI no signal!!!

Hi there @ellocopirates,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having trouble with the HDMI port on your notebook. I am happy to help with this. Please post the full product number for your notebook. See the following, if you need help with that information.
How Do I Find My Model Number or Product Number?
Have you tried a different HDMI cable? Or tried connecting to a different external device?
Does the same cable and external device work when connected to another notebook using HDMI?
Were there any recent changes to your system? Software, hardware, drivers?
For now, try working through this page.
HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Z87-G43 gaming HDMI/DVI ports not working

Similar Messages

Maybe you are looking for