Z87-G43 On-board sound issue (Audio Service not running)

Hello all.
Just bought the above board, did a fresh install of Win 7 on a newly formatted drive. I'm just using a simple jack from speakers into the green input on the board.
Used the CD that came with the mobo to get the drivers and then updated via windows driver updates. Windows is telling me my Realtek HD audio driver is up to date.
I have checked many different places to find out why and still have not had any luck getting any sound out.
checked BIOS to see if on board sound is enabled.
checked Realtek audio manager which is coming up blank.
checked running services and still no luck.
Can anyone offer some suggestions that might help please?

Update bios to version 1.8:
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB
G.) Now follow the directions and let the tool flash the bios

Similar Messages

Audio Service not running G71-445US Notebook

Hi, Just observed last night that there is a little X on the speaker icon on my toolbar. The sound still plays. I tried following the instructions on another post for another model of this laptop, and do not see Audio Service listed under services . The other 3 things..Multimedia Class Scheduler,Windows Audio and Windows Audio Endpoint Builder are all listed as started. I just wonder if this means the drivers are missing.
This is a G71-445US notebook and the operating system is Windows7.
Also have an issue with Intel Graphics driver as advised by a little flag on my tool bar. I know there is a problem because the screen goes blank, and recently, the computer shuts down now. I have tried troubleshooting but everytime i look into this, a window comes up and says "the solution could not be downloaded"..
The problem with the Graphics driver has been about 4 months,, the audio issue just appeared yesterday.
Also, the pc is now getting VERY hot in a short period of time. I have compressed air and intend to dust it out today. Just wondering if that is related to either of the above issues.
Thank you for your time,
Melanie

Hi Melanie9,
Welcome to the HP Support Forums!
I see you having a few issues with your HP G71-445US Notebook PC. I would suggest that we deal with the overheating issue first.
Follow the steps in this document for Troubleshooting an Overheating and Auto Shutdown Issue. If this helps, then try this document for Resolving Video Graphics Issues to see if this resolves the graphics issue.
If you are able to get the visual back up on your Notebook display screen, then try Using Recovery Manager to Restore Software and Drivers (Windows 7) to restore the original drivers.
If this does not resolve your issue then please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link to get the support number for your region. Contact HP Worldwide.
I hope this information helps, please let me know how it goes or if you have any questions.
Good luck and have a great day!
I worked on behalf of HP.

HP Pavilion - Audio Service Not Running

Hi I recently bought a new HP Pavilion 15 and the volume icon on the bottom right footer has an 'x' in a red circle next to it. When I hover over it, it says 'the audio service is not running'. I currently have no sound on the laptop.
Any idea how this can be fixed please?
Thanks
This question was solved.
View Solution.

Hi Tom,
Hold down the Windows key and press R.
Into the Run box type services.msc and hit enter.
Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service ( this may not be in the list )
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
When done, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Puter say not audio service not running

my laptop say audio service is not running, I tried to do it and still nothing. I have been working to get sound on for over a month, i hate no sound

Hi,
As you mentioned the dism tool, so you can use DISM.exe /Online /Cleanup-image /Restorehealth to fix the Windows corruption, you can also use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source
of the files. Please see detailed instruction in the link below:
Fix Windows corruption errors by using the DISM or System Update Readiness tool
https://support2.microsoft.com/kb/947821?wa=wsignin1.0
Yolanda Zhu
TechNet Community Support

Windows Audio service not running

I have just built my new computer, and I loaded up windows on it, and everything is working fine but the audio. I have the X over the audio and the "audio service is not running" error. I tried to start The Windows Audio service in the service
menu, but when I do that, I click the audio button and the red X reappears. I know I have all the dependant services enabled, because I have read through many forum posts. So, just to sum things up, all dependant services are on, I get the X error, and whenever
I start the Windows audio service it seems like its working but when I click the volume bar the X reappears over the icon.

Hello,
I recommend reposting your question in one of the Windows forums, depending on which OS version you are running. For example, either Windows 7 IT Pro or Windows 8.1 IT Pro forums.
- Christopher
Until the Whole World Hears

My sounds and audio is not working. it's not in mute. help please

i need help. my sounds and audio is not working. but it's not in mute button.

Hi,
Can you post back with the following details.
1. The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Diagnostics policy service not running on Windows 7 home premium

I'm unable to connect to internet through wireless connectionsr . it says limited access to wi-fi router. When i try to fix this it says diagnostics policy service not running. Checked services.msc While the type is set up to automatic Unable to start the
service. I had similar problem with my LAN connection. After resetting my LAN connection i was able to connect to internet. Tried this on wifi as well but the issue remains.
Error code is 5: access denied

Hi,
Thanks for the post!
Go to your Device Manager and uninstall the network device, including the wireless network card, then restart the computer. Let the system automatically reinstall the driver for you. You can also manually update the network card driver to the latest one.
After that, check if you can connect to the internet.
For the Diagnostics policy service issue. please click Start, input regedit in the search box, press Enter to open your Registry Editor, navigate to the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters.
Right click this key, choose permission, click the user "Trustedinstaller", ensure the permission is set to "Full Control" and "Read". Then click OK to apply the change.
Restart the computer to check if this service is working now.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Windows Modules Installer - Autostart Service Not Running

I'm receiving in my health reports for four separate WSE 2012R2 deployments the below error. I've set the service to restart upon failure, but it seems this occurs upon every server reboot until I manually go in and start the service. However,
from my understanding this service only runs when it is needed, which would leave me to a false negative in the BPA scan.
Just curious if anyone else is getting this.
Autostart Services Not Running:
Windows Modules Installer

Hi MattSla,
On current situation, please type services.msc in RUN to open Services panel. Then navigate to Windows Modules
Installer service and open Properties. In General tab, please check Startup type of this service. Did set as Manual? Meanwhile, in Log On tab, please check which account this service used to log on as? Did log on as Local System account?
I check the Windows Modules Installer service in two Windows Server 2012 R2 Essentials in my Lab environment.
It seems that this service was set as Manual. Then Generate a Health Report in Dashboard, and didn’t find any error which was related to ‘Autostart Service Not Running’.
If this issue still exists, please open Event Viewer and check if find some relevant events. Those may help
us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

Thanks for writing to us. Unfortunately, such advanced javascript support is currently not provided by Adobe Reader for Android.
Thanks,
Adobe Reader Team

Auto-start services not running :Shell Hardware Detection in my Health Reports

Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?

Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems

The Data access service not running or not yet initialized.

Hello guys ,
i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error
OS : Windows 2012r2 patched and scom 2012 r2
sql : 2012 r2 enuff database size
tried few things as :
1. change the account to domain admin for system center data acess service still no luck
2. created registry keys for servicepipetimeout to 6000 bt still nit working
3. Refresh sql account used for sccom data aceess service still no luck
4. the service disappears as running after 30 seconds and the console is unable to open
kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
thanks guys in advance
Basit Siddiqui
AIG

Check that following:
Verify permission of SCOM Account on sysadmin and OM DB.
Check firewall that is disable
Check antivirus that didn't block scom folders or services.
Check SQL services is running
Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
Also you can check below link
http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Window search service not running

window search service not running how i can fix it?
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press

[mostly solved] Strigi service not running

Hello,
Since I am constantly fluctuating between a rich and a minimalistic desktop environment, I'm trying out KDE once again. The Soprano/Nepomuk/Strigi stuff seems really interesting but I fail at using it.
When I go to System Settings -> Advanced -> Desktop Search it says "Strigi service not running". While Nepomuk is activated, I can't activate Strigi. When I set the checkbox for Strigi and apply, the message is still there. When I close the widow and go back again, the checkbox is deactivated again.
The searchbar in dolphin never finds anything and there is no interface for tagging or commenting files.
However, I can index files and find stuff when I run strigiclient.
What may the problem be?
Thanks,
Viv
Last edited by V for Vivian (2010-06-30 07:48:54)

Steigi seems to be installed.
viv ~ $ pacman -Q strigi
strigi 0.7.2-2
I'm considering a clean Chakra installation but this seems kind of unaesthetic and stupid.
edit01: I've just renamed my .kde4 folder and restarted KDE. Now Strigi is indexing and I can tag files, everything works. Some kind of configuration seems to have been wrong. I think I can figure this out.
edit02: I had to replace the .kde4/share/apps/nepomuk folder with a clean one, maybe something with the database or how it is accessed. Don't have time to go into this right now, I'm just happy it works now.
Last edited by V for Vivian (2010-06-30 08:16:11)

Z87-G43 5.1 sound-onboard issues

Hello !
Just bought my new system and seems I have problems with the sound card onboard. I have 5.1 surround Speakers and Center and Rear speakers won't work @ all in Windows, but seems in-games ( tested in 2 so far ) works fine.
It's probably Driver issues so I hope MSI stuff will at least test it and hope for soon update version, if that's where the problem is.
Driver downloaded from:
http://www.msi.com/product/mb/Z87-G43.html#/?div=Driver&os=Win7 64
My current settings on the Audio Manager:
http://i.imgur.com/8AkiJHi.jpg
When I press "Auto test" playback button, all speakers work fine !
Driver Version: 6.0.1.6959
Z87-G43
i5-4670K
GTX760
Windows 7 x64 bit
Regards

I've the same problem with my Z87-G45.
The button "fill speakers" in the last Realtek 1150 driver simply doesn't work at all.
It perfectly works Under Windows 8.1 drivers, but I can not correct my room with Windows driver.
Please could you help us or fix it ?
Thanks

Z87-G43 5.1 sound problems

Almost every day I was refreshing MSI driver site for my mainboard to see did new driver in a hope that my issues will be fixed, and when I saw driver update tonight was like a little child when sees a ice cream, but sadly problems didn't changed at all even after installing new driver :/
The thing is that there is no way I can activate "Speaker Fill" for my 5.1 speakers. I listen music, watch movies and videos only on my Front and Sub speakers, while Center and Rear won't work at all. Whatever I do ( Turn off or on Speaker Fill ) nothing changes
My all 5.1 speakers work only when I press "Auto Test" button in HD Audio Manager. Please, it's annoying to listen music and watch movies and videos with front and sub speaker only, while my Center and Rear Speakers lay there for nothing. My guess is that this is a driver problem. My friend have same speakers and when I enable Speaker fill in his Realtek HD Audio manager, all of his speakers works fine.
I appeal to MSI stuff to try fix this on next update of driver if possible ! Please ! Or maybe could it be my chip fail ?
Rest of my hardware
I5 3570k @ Stock
MSI Z87-G43 ( 1.2 Bios )
MSI GTX 760 Gaming ( 327.23 ) I tried to disable Nvidia High definition Audio to see was there some conflict, but problems still persist ..
SYS: Windows 7 X64 Ultimate

Quote from: sib0 on 11-October-13, 08:16:30
Almost every day I was refreshing MSI driver site for my mainboard to see did new driver in a hope that my issues will be fixed, and when I saw driver update tonight was like a little child when sees a ice cream, but sadly problems didn't changed at all even after installing new driver :/
The thing is that there is no way I can activate "Speaker Fill" for my 5.1 speakers. I listen music, watch movies and videos only on my Front and Sub speakers, while Center and Rear won't work at all. Whatever I do ( Turn off or on Speaker Fill ) nothing changes
My all 5.1 speakers work only when I press "Auto Test" button in HD Audio Manager. Please, it's annoying to listen music and watch movies and videos with front and sub speaker only, while my Center and Rear Speakers lay there for nothing. My guess is that this is a driver problem. My friend have same speakers and when I enable Speaker fill in his Realtek HD Audio manager, all of his speakers works fine.
I appeal to MSI stuff to try fix this on next update of driver if possible ! Please ! Or maybe could it be my chip fail ?
Rest of my hardware
I5 3570k @ Stock
MSI Z87-G43 ( 1.2 Bios )
MSI GTX 760 Gaming ( 327.23 ) I tried to disable Nvidia High definition Audio to see was there some conflict, but problems still persist ..
SYS: Windows 7 X64 Ultimate
Something is wrong here. You list your CPU as the i5 3570K and your MB as the Z87-G43. This cannot be true, as these 2 are not compatible!
Please clarify!
Yogi

Z87-G43 On-board sound issue (Audio Service not running)

Similar Messages

Maybe you are looking for